Hi bugfinder,
yes it' true. I'm running BM2LTS on a classic PC with Tevii S464 DVB-S2 card and eHD for the display.
I've already done the selection with route66.
The others build was fine. I don't understand why i can't get reception as i don't use IP and it should work without network.
Pierre
Hi cinfo and others,
i've installed the latest RC10, and i have a annoying problem. I've searched how to solve it but i don't understand what is wrong.
Each time, i powered the bm2lts, the systems loads normally except i don't have any tv reception (FTA and non-FTA). The OSD works nice, and also remote conf.
each time, i must log to console and: /etc/init.d/reelvdr restart.
then, everything is working well.
What can i do to solve the problem?
thanks to advance
Pierre
Hi,
HD-TV or SD-TV?
regards
cinfo
Hi,
it's HDTV (Cartoon Network) and SDTV (DVB-t), i haven't tried on SDTV (most channels are HDTV) yet.
the recordings are on the HDD and not in the NAS.
I've tried to set the Language to English, it's the same, so back to French
thanks
Edit: 18/oct/2015
Hi cinfo,
I have a problem, VDR crash each time i'm trying to cut a recording.
Have you noticed that?
thanks
Hi Cinfo,
the future RC8 will still have the eHD support?
thanks
Thanks cinfo for the lcdproc plugin
Hi cinfo,
could you please add the lcdproc plugin to bm2lts?
thanks in advance
Hi,
here is some infos
your lspci command doesn't work here
root@BM2LTSR66D:~# dmesg | grep -i cx
[ 13.319609] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
[ 13.320239] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
[ 13.320360] cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected], frontend(s): 1
[ 13.320365] cx88[0]: TV tuner type 4, Radio tuner type -1
[ 13.485999] tveeprom 6-0050: decoder processor is CX882 (idx 25)
[ 13.486008] cx88[0]: hauppauge eeprom: model=90002
[ 13.684438] input: cx88 IR (Hauppauge Nova-T DVB-T as /devices/pci0000:00/0000:00:1e.0/0000:01:01.0/rc/rc1/input5
[ 13.684666] rc1: cx88 IR (Hauppauge Nova-T DVB-T as /devices/pci0000:00/0000:00:1e.0/0000:01:01.0/rc/rc1
[ 13.684977] input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input6
[ 13.685501] rc rc1: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 1
[ 13.685519] cx88[0]/0: found at 0000:01:01.0, rev: 5, irq: 22, latency: 32, mmio: 0xfb000000
[ 13.685801] cx88[0]/0: registered device video0 [v4l2]
[ 13.685961] cx88[0]/0: registered device vbi0
[ 13.686443] cx88[1]: subsystem: d464:9022, board: TeVii S464 DVB-S/S2 [card=86,autodetected], frontend(s): 1
[ 13.686450] cx88[1]: TV tuner type -1, Radio tuner type -1
[ 14.576367] input: cx88 IR (TeVii S464 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:01:02.0/rc/rc2/input7
[ 14.576759] rc2: cx88 IR (TeVii S464 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:01:02.0/rc/rc2
[ 14.577062] input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input8
[ 14.577484] rc rc2: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 2
[ 14.577500] cx88[1]/0: found at 0000:01:02.0, rev: 5, irq: 23, latency: 32, mmio: 0xf9000000
[ 14.577750] cx88[1]/0: registered device video1 [v4l2]
[ 14.577876] cx88[1]/0: registered device vbi1
[ 14.578056] cx88[0]/2: cx2388x 8802 Driver Manager
[ 14.580798] cx88[0]/2: found at 0000:01:01.2, rev: 5, irq: 22, latency: 32, mmio: 0xfc000000
[ 14.580948] cx88[1]/2: cx2388x 8802 Driver Manager
[ 14.581201] cx88[1]/2: found at 0000:01:02.2, rev: 5, irq: 23, latency: 32, mmio: 0xfa000000
[ 14.848455] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[ 14.848466] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 14.848474] cx88[0]/2: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18]
[ 14.848479] cx88[0]/2: cx2388x based DVB/ATSC card
[ 14.848484] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 15.110826] DVB: registering new adapter (cx88[0])
[ 15.110844] cx88-mpeg driver manager 0000:01:01.2: DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)...
[ 15.116712] cx88[1]/2: subsystem: d464:9022, board: TeVii S464 DVB-S/S2 [card=86]
[ 15.116720] cx88[1]/2: cx2388x based DVB/ATSC card
[ 15.116725] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 15.232080] DVB: registering new adapter (cx88[1])
[ 15.232099] cx88-mpeg driver manager 0000:01:02.2: DVB: registering adapter 1 frontend 0 (Montage Technology DS3000)...
root@BM2LTSR66D:~# dmesg | grep -i dvb
[ 13.320360] cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected], frontend(s): 1
[ 13.485988] tveeprom 6-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
[ 13.684438] input: cx88 IR (Hauppauge Nova-T DVB-T as /devices/pci0000:00/0000:00:1e.0/0000:01:01.0/rc/rc1/input5
[ 13.684666] rc1: cx88 IR (Hauppauge Nova-T DVB-T as /devices/pci0000:00/0000:00:1e.0/0000:01:01.0/rc/rc1
[ 13.686443] cx88[1]: subsystem: d464:9022, board: TeVii S464 DVB-S/S2 [card=86,autodetected], frontend(s): 1
[ 14.576367] input: cx88 IR (TeVii S464 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:01:02.0/rc/rc2/input7
[ 14.576759] rc2: cx88 IR (TeVii S464 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:01:02.0/rc/rc2
[ 14.848455] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[ 14.848466] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 14.848474] cx88[0]/2: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18]
[ 14.848479] cx88[0]/2: cx2388x based DVB/ATSC card
[ 15.110826] DVB: registering new adapter (cx88[0])
[ 15.110844] cx88-mpeg driver manager 0000:01:01.2: DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)...
[ 15.116712] cx88[1]/2: subsystem: d464:9022, board: TeVii S464 DVB-S/S2 [card=86]
[ 15.116720] cx88[1]/2: cx2388x based DVB/ATSC card
[ 15.232080] DVB: registering new adapter (cx88[1])
[ 15.232099] cx88-mpeg driver manager 0000:01:02.2: DVB: registering adapter 1 frontend 0 (Montage Technology DS3000)...
Slot: 01:01.0
Class: Multimedia video controller
Vendor: Conexant Systems, Inc.
Device: CX23880/1/2/3 PCI Video and Audio Decoder
SVendor: Hauppauge computer works Inc.
SDevice: Device 9002
Rev: 05
Slot: 01:01.2
Class: Multimedia controller
Vendor: Conexant Systems, Inc.
Device: CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port]
SVendor: Hauppauge computer works Inc.
SDevice: Nova-T DVB-T Model 909
Rev: 05
Slot: 01:01.4
Class: Multimedia controller
Vendor: Conexant Systems, Inc.
Device: CX23880/1/2/3 PCI Video and Audio Decoder [IR Port]
SVendor: Hauppauge computer works Inc.
SDevice: Nova-T DVB-T Model 909
Rev: 05
Slot: 01:02.0
Class: Multimedia video controller
Vendor: Conexant Systems, Inc.
Device: CX23880/1/2/3 PCI Video and Audio Decoder
SVendor: Unknown vendor d464
SDevice: Device 9022
Rev: 05
Slot: 01:02.2
Class: Multimedia controller
Vendor: Conexant Systems, Inc.
Device: CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port]
SVendor: Unknown vendor d464
SDevice: Device 9022
Rev: 05
Slot: 01:03.0
Class: Multimedia controller
Vendor: Micronas USA, Inc.
Device: Device 8100
SVendor: Micronas USA, Inc.
SDevice: Device 8100
Thanks stschulze,
but it doesn't help.
During my differents tests, i've found a curious thing.
I thought that perhaps the dvb card has a problem with H transponders, here in France the most transponders are using V polarity
So i've decided to scan a random H transponder. I've tried to scan the channel RTL HD at 10832 H (DVB-S2 8PSK 22000 2/3)
It doesn't find theses channels but some others!!!
ZDF HD;ZDFvision:10832:hC23I0M5O35S1:S19.2E:22000:6110=27:6120=deu@3,6121=mis@3,6123=mul@3;6122=deu@106:6130;6131=deu:0:11110:1:1011:0
zdf_neo HD;ZDFvision:10832:hC23I0M5O35S1:S19.2E:22000:6310=27:6320=deu@3,6321=mis@3,6323=mul@3;6322=deu@106:6330:0:11130:1:1011:0
zdf.kultur HD;ZDFvision:10832:hC23I0M5O35S1:S19.2E:22000:6410=27:6420=deu@3,6421=mis@3,6423=mul@3;6422=deu@106:6430:0:11140:1:1011:0
Now, i understand why VDR can't tune the channels at 12722 H. In fact, there are nothing at this frequency.
How is it possible? The problem is software because with BM2LTS 1.93.3A, the channels are tuning fine.
I'm using the same channels.conf in the 1.93.3A and 2.60A
I've already tried another DVB driver (CrazyCat s2-liplianin-v39) but it doesn't change.
I only have one DVB card so i cannot change to test
Please help,
Ok, i don't use it. I've choosen the Recovery dvd installation so Step1 is useless for me.
Hi cinfo,
i've just installed and configured the 2.60A.
I still have the tuning problem on the 12722 transponder. each time, i tune, i've got a "Channel unavailable" error message. It's still working fine with 1.93.3A
Why a new 2.61A? What are the changes between them?
thx
I'm using BM2LTS 2.45A with a Tevii S464 DVB-S2 PCI card
in fact,
i already have the channels.conf. The channels.conf works perfectly on 1.93.
On 2.x, with the same channels.conf, the channels from the transponders 12722 doesn't work anymore
i don't know why
Hi cinfo,
i've noticed a tuning problem with the BM2LTS 2.x
With the same hardware install, i can't tune the channels from 12722 H on Astra. It's working fine in the latest 1.93 3A (kernel 3.3.x)
In bm2lts 2.x, i've tried to compile the latest driver, installed them but it doesn't change.
Have you any ideas?
thanks
[Blockierte Grafik: http://i.imgur.com/yaPWraA.png]
I am seeding the torrent from the first day of the release. Check your connectivity please.
If cinfo do not have something against, I can upload the image to dropbox.
oups, i made a mistake with my quotes.
In fact, i want to download the RC2 release and there is no seed at all. RC3 and RC4 are already download.
I only want the sources that are included in the RC2 release and not in RC3-RC4.
Hi,
es steht jetzt eine BM2LTS_V2.40A_RC4_Route66_Release.iso zum Download bereit (siehe oben)
Grüße
cinfo
Hi cinfo,
there are no seed on that torrent. Could you make a tar archive somewhere?
thanks
thanks for the generate preview script. Works fine.
thanks for RC4.
I've just reinstall and all is working fine.
Do you think it's possible to add somewhere on the menu, a new entry that could reload (1- Restart VDR, 2- restart DVB, 3- reboot BM2LTS)?
I have sometimes buffer overflow with some HD channels, the only way is to restart the PC or if VDR crashed, it will be ok after that.
thanks for adding the dvb-fe-ds3000.fw.
If i send you my lirc config, could you integrate it? i use the mceusb driver and the hauppauge remote control from my dvb-t card (the grey one)
Last questions about the sources. Will it be available somewhere? the french menus are not perfect
thanks
thanks cinfo, i'm seeding it.
2 questions. i run bm2lts on a pc. still on rc3 for the moment
what is the difference between the standby and poweroff mode?
i've tried both and the pc shutdown (and open the dvd drive).
is it possible to start the pc with remote control when the pc goes in standby?
if not, could you tell me the interest of a such mode?
i've just notice a longer bootime (especially between the apparence of the bm2lts screen and the real tv picture). is it normal?
why the dvd drive tray is opened at shutdown?
how do you scan dvb-s2 transponders? i can't find on wirbelscan how to change 8psk
Hi cinfo,
have you an estimate date of release?
thanks for your work
Hi,
make a update and you will find it.
Grüße
cinfo
Thanks, it's working fine.
Zitat von cinfomaybe you teste it over HDMI?
The DTS sound comes only through to the DIGITAL AUDIO OUT (OPTICAL) of the Reelbox
Yes, i only have HDMI with the eHD isn't ? there is an optical connector on this card?
thx
The MOSAIQUE channels are working (quite fine) with the testing eHD firmware
