Beiträge von hugovdr

Hi Wireless-Freunde ,

mir gelingt es nicht die Module für meine NETGEAR WG311 Wireless PCI-Card zu generieren .
Als Treiber-Source verwende ich madwifi-20030802
von ( http://prdownloads.sourceforge…ifi-20030802.tgz?download )

p3-900:/usr/local/src/madwifi-20030802 # make
for i in ./ath_hal ./wlan ./driver; do \
(cd $i; make); \
done
make[1]: Entering directory `/usr/local/src/madwifi-20030802/ath_hal'
cp ../hal/linux/opt_ah.h opt_ah.h
rm -f .depend
gcc -M -include ../include/compat.h -I../include -I../hal -I../hal/linux -I../ath_hal -I/lib/modules/2.4.22/build/include -I.. -D__KERNEL__ -DMODULE -Wall -g -O -fomit-frame-pointer ../hal/linux/ah_osdep.c > .depend
make[1]: Leaving directory `/usr/local/src/madwifi-20030802/ath_hal'
make[1]: Entering directory `/usr/local/src/madwifi-20030802/ath_hal'
gcc -c -o ah_osdep.o -include ../include/compat.h -I../include -I../hal -I../hal/linux -I../ath_hal -I/lib/modules/2.4.22/build/include -I.. -D__KERNEL__ -DMODULE -Wall -g -O -fomit-frame-pointer ../hal/linux/ah_osdep.c
uudecode < ../hal/linux/i386-elf.hal.o.uu
/bin/sh: uudecode: command not found
make[1]: *** [hal.o] Error 127=------------------------welcher Fehler ??????????????????????
make[1]: Leaving directory `/usr/local/src/madwifi-20030802/ath_hal'
make[1]: Entering directory `/usr/local/src/madwifi-20030802/wlan'
rm -f .depend
gcc -M -include ../include/compat.h -I../include -I. -I/lib/modules/2.4.22/build/include -I.. -D__KERNEL__ -DMODULE -Wall -g -O -fomit-frame-pointer if_ieee80211subr.c if_ieee80211wireless.c if_media.c rc4.c > .depend
make[1]: Leaving directory `/usr/local/src/madwifi-20030802/wlan'
make[1]: Entering directory `/usr/local/src/madwifi-20030802/wlan'
gcc -include ../include/compat.h -I../include -I. -I/lib/modules/2.4.22/build/include -I.. -D__KERNEL__ -DMODULE -Wall -g -O -fomit-frame-pointer -c -o if_ieee80211subr.o if_ieee80211subr.c
gcc -include ../include/compat.h -I../include -I. -I/lib/modules/2.4.22/build/include -I.. -D__KERNEL__ -DMODULE -Wall -g -O -fomit-frame-pointer -c -o if_ieee80211wireless.o if_ieee80211wireless.c
gcc -include ../include/compat.h -I../include -I. -I/lib/modules/2.4.22/build/include -I.. -D__KERNEL__ -DMODULE -Wall -g -O -fomit-frame-pointer -c -o if_media.o if_media.c
gcc -include ../include/compat.h -I../include -I. -I/lib/modules/2.4.22/build/include -I.. -D__KERNEL__ -DMODULE -Wall -g -O -fomit-frame-pointer -c -o rc4.o rc4.c
ld -o wlan.o -r -x if_ieee80211subr.o if_ieee80211wireless.o if_media.o rc4.o
make[1]: Leaving directory `/usr/local/src/madwifi-20030802/wlan'
make[1]: Entering directory `/usr/local/src/madwifi-20030802/driver'
rm -f .depend
gcc -M -include ../include/compat.h -I../include -I. -I../hal -I../hal/linux -I../ath_hal -I../wlan -I/lib/modules/2.4.22/build/include -I.. -D__KERNEL__ -DMODULE -Wall -g -O -fomit-frame-pointer if_ath.c if_ath_pci.c > .depend
make[1]: Leaving directory `/usr/local/src/madwifi-20030802/driver'
make[1]: Entering directory `/usr/local/src/madwifi-20030802/driver'
gcc -include ../include/compat.h -I../include -I. -I../hal -I../hal/linux -I../ath_hal -I../wlan -I/lib/modules/2.4.22/build/include -I.. -D__KERNEL__ -DMODULE -Wall -g -O -fomit-frame-pointer -c -o if_ath.o if_ath.c
if_ath.c: In function `ath_sysctl_dump':
if_ath.c:2574: warning: field width is not type int (arg 3)
gcc -include ../include/compat.h -I../include -I. -I../hal -I../hal/linux -I../ath_hal -I../wlan -I/lib/modules/2.4.22/build/include -I.. -D__KERNEL__ -DMODULE -Wall -g -O -fomit-frame-pointer -c -o if_ath_pci.o if_ath_pci.c
ld -o ath_pci.o -r if_ath.o if_ath_pci.o
make[1]: Leaving directory `/usr/local/src/madwifi-20030802/driver'
p3-900:/usr/local/src/madwifi-20030802 #

mfg. Thomas

Hi e-PUNK ,

danke für deine schnelle Antwort . Die Sache mit den Shellskript hab ich getestet (siehe unten)
leider hats nicht geklappt 3 Versuche SYMBOL 2750000 6875000 6900000

als erstes hab ich die vdrscan.sh angelegt (kopy+einfügen mit edit )
2. vdrscan.sh nach /bin kopiert und mit chmod 770 ausführbar gemacht .
3. verzeichnis /usr/local/src/My_VDR-scripts angelegt.
4. vdrscan.data angelegt
5. verzeichnis /video/config/ angelegt
6, meine channels.conf nach /video/config/ kopiert.

sh-2.05# vdrscan.sh Symbolrate 6875000
===================================================================
scanning /usr/local/src/My_VDR-scripts/vdrscan.data
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 410000000 6875000 0 3
initial transponder 418000000 6875000 0 3
initial transponder 426000000 6875000 0 3
initial transponder 434000000 6875000 0 3
initial transponder 442000000 6875000 0 3
initial transponder 450000000 6875000 0 3
initial transponder 458000000 6875000 0 3
initial transponder 466000000 6875000 0 3
>>> tune to: 410:M64:C:6875:
WARNING: >>> tuning failed!!!
>>> tune to: 410:M64:C:6875: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 418:M64:C:6875:
WARNING: >>> tuning failed!!!
>>> tune to: 418:M64:C:6875: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 426:M64:C:6875:
WARNING: >>> tuning failed!!!
>>> tune to: 426:M64:C:6875: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 434:M64:C:6875:
WARNING: >>> tuning failed!!!
>>> tune to: 434:M64:C:6875: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 442:M64:C:6875:
WARNING: >>> tuning failed!!!
>>> tune to: 442:M64:C:6875: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 450:M64:C:6875:
WARNING: >>> tuning failed!!!
>>> tune to: 450:M64:C:6875: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 458:M64:C:6875:
WARNING: >>> tuning failed!!!
>>> tune to: 458:M64:C:6875: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 466:M64:C:6875:
WARNING: >>> tuning failed!!!
>>> tune to: 466:M64:C:6875: (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
sh-2.05#

sh-2.05# vdrscan.sh SYMBOLRATE 6900000
=============================================================
scanning /usr/local/src/My_VDR-scripts/vdrscan.data
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 410000000 6900000 0 3
initial transponder 426000000 6900000 0 3
initial transponder 418000000 6900000 0 3
initial transponder 426000000 6900000 0 3
initial transponder 434000000 6900000 0 3
initial transponder 442000000 6900000 0 3
initial transponder 450000000 6900000 0 3
initial transponder 458000000 6900000 0 3
initial transponder 466000000 6900000 0 3
>>> tune to: 410:M64:C:6900:
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
WARNING: filter timeout pid 0x0010
>>> tune to: 426:M64:C:6900:
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
WARNING: filter timeout pid 0x0010
>>> tune to: 418:M64:C:6900:
WARNING: >>> tuning failed!!!
>>> tune to: 418:M64:C:6900: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 426:M64:C:6900:
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
WARNING: filter timeout pid 0x0010
>>> tune to: 434:M64:C:6900:
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
WARNING: filter timeout pid 0x0010
>>> tune to: 442:M64:C:6900:
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
WARNING: filter timeout pid 0x0010
>>> tune to: 450:M64:C:6900:
WARNING: >>> tuning failed!!!
>>> tune to: 450:M64:C:6900: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 458:M64:C:6900:
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
WARNING: filter timeout pid 0x0010
>>> tune to: 466:M64:C:6900:
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
WARNING: filter timeout pid 0x0010
dumping lists (0 services)
Done.
sh-2.05#

p3-900:/usr/local/src/My_VDR-scripts # sh
sh-2.05# vdrscan.sh
scanning /usr/local/src/My_VDR-scripts/vdrscan.data
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 410000000 2750000 0 3
initial transponder 426000000 2750000 0 3
initial transponder 418000000 2750000 0 3
initial transponder 426000000 2750000 0 3
initial transponder 434000000 2750000 0 3
initial transponder 442000000 2750000 0 3
initial transponder 450000000 2750000 0 3
initial transponder 458000000 2750000 0 3
initial transponder 466000000 2750000 0 3
>>> tune to: 410:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 410:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 426:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 426:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 418:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 418:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 426:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 426:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 434:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 434:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 442:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 442:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 450:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 450:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 458:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 458:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 466:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 466:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
sh-2.05#

SYMBOLRATE 2750000
============================================================================
p3-900:/usr/local/src/My_VDR-scripts # sh
sh-2.05# vdrscan.sh
scanning /usr/local/src/My_VDR-scripts/vdrscan.data
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 410000000 2750000 0 3
initial transponder 426000000 2750000 0 3
initial transponder 418000000 2750000 0 3
initial transponder 426000000 2750000 0 3
initial transponder 434000000 2750000 0 3
initial transponder 442000000 2750000 0 3
initial transponder 450000000 2750000 0 3
initial transponder 458000000 2750000 0 3
initial transponder 466000000 2750000 0 3
>>> tune to: 410:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 410:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 426:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 426:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 418:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 418:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 426:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 426:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 434:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 434:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 442:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 442:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 450:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 450:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 458:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 458:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 466:M64:C:2750:
WARNING: >>> tuning failed!!!
>>> tune to: 466:M64:C:2750: (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
sh-2.05#

mfg. Thomas

Hi ,

nach der Installation von linvdr1.2.6 mit Komplettpatch ist mein Bildschirm ist immer noch dunkel .
Mein Vorgehen :
1 .DVB-Treiber nach Hubertus installiert --fehlefrei
2. VDR -Sourcen entpackt (usr/local/src)
3. komplettpatch eingespielt --fehlerfrei kein hunk etc.
4. VDR -Sourcen nach Hubertus übersetzt --fehlerfrei
5. Plugins im VDR -Verzeichnis erstellt --fehlerfrei
6. ./runvdr die Fußzeile von RTL mit Datum ist kurz zu sehen

p3-900:/usr/local/src/VDR # ./runvdr
opening /video/icons/RTL.logo

warum scannt vdr nicht ? (trotz autopid im Komplettpatch )
was ist bei mir falsch ????????????????????????????????????????????????????????????

mfg. Thomas

Hi ,

habe den DVB- Treiber nach Hubertus installiert , linvdr entpackt mit link VDR ,
den Patch installiert (fehlerfrei) und VDR dannach ebenfalls nach Hubertus installiert .
Beim Starten erscheint CONVERGENCE 2001 dannach mehrmals NO channels available mit rotem Balken im unteren Bildschirmrand..
Was bedeutet dieses ? scannt er bereits ? wenn Nein , was muß ich tun damit er das Kabel abscannt ?

p3-900:/usr/local/src/VDR # ./runvdr
/lib/modules/2.4.22/build/scripts/pathdown.sh: TOPDIR: parameter null or not set
DIR=`pwd`; (cd /lib/modules/2.4.22/build; make SUBDIRS=$DIR modules)
make[1]: Entering directory `/usr/src/linux'
make -C /usr/local/src/DVB/driver CFLAGS="-D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-alia
sing -fno-common -fomit-frame-pointer -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE" MAKING_MODULES=1 modules
make[2]: Entering directory `/usr
/local/src/DVB/driver'
ld -m elf_i386 -r -o dvb-core.o dmxdev.o dvb_demux.o dvb_net.o dvb_i2c.o dvb_filter.o dvb_frontend.o dvbdev.o compat.o dvb_ksyms.o
make -C av7110 modules
make[3]: Entering directory `/usr/local/src/DVB/driver/av7110'
ld -m elf_i386 -r -o dvb-ttpci.o saa7146_core.o saa7146_v4l.o av7110.o av7110_ir.o ttpci_eeprom.o
make[3]: Leaving directory `/usr/local/src/DVB/driver/av7110'
make -C b2c2 modules
make[3]: Entering directory `/usr/local/src/DVB/driver/b2c2'
make[3]: Nothing to be done for `modules'.
make[3]: Leaving directory `/usr/local/src/DVB/driver/b2c2'
make -C frontends modules
make[3]: Entering directory `/usr/local/src/DVB/driver/frontends'
make[3]: Nothing to be done for `modules'.
make[3]: Leaving directory `/usr/local/src/DVB/driver/frontends'
make[2]: Leaving directory `/usr/local/src/DVB/driver'
make[1]: Leaving directory `/usr/src/linux'

sync
( \
insmod videodev; \
\
insmod dvb-core.o dvb_shutdown_timeout=0; \
make -C frontends insmod; \
make -C av7110 insmod; make -C b2c2 insmod; \
)
Using /lib/modules/2.4.22/kernel/drivers/media/video/videodev.o
make[1]: Entering directory `/usr/local/src/DVB/driver/frontends'
insmod alps_bsrv2.o; insmod alps_tdmb7.o; insmod alps_tdlb7.o; insmod grundig_29504-401.o; insmod grundig_29504-491.o; insmod stv029.o; insmod ves1820.o; insmod tda1004x.o; insmod mt312.o;
make[1]: Leaving directory `/usr/local/src/DVB/driver/frontends'
make[1]: Entering directory `/usr/local/src/DVB/driver/av7110'
insmod input; \
insmod evdev; \
insmod dvb-ttpci.o;
Using /lib/modules/2.4.22/kernel/drivers/input/input.o
insmod: a module named input already exists
Using /lib/modules/2.4.22/kernel/drivers/input/evdev.o
insmod: a module named evdev already exists
make[1]: Leaving directory `/usr/local/src/DVB/driver/av7110'
make[1]: Entering directory `/usr/local/src/DVB/driver/b2c2'
insmod skystar2.o;
skystar2.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
make[1]: [insmod] Error 1 (ignored)
make[1]: Leaving directory `/usr/local/src/DVB/driver/b2c2'
sync
opening /video/icons/RTL.logo

Vielen Dank im Voraus THOMAS

Hi Saxman2k ,

hab das Verzeichnis VDR gelöscht , VDR-Sourcen neu entpackt und den SCANpatch
nach /VDR/PLUGIND/src/scanner kopiert.
Anschließend VDR neu installiert und make plugins eingegeben .
Die bereits vorhandenen Patches machen keine Probleme nur noch der
SCANNPATCH

p3-900:/usr/local/src/VDR # make plugins
make[1]: Entering directory `/usr/local/src/vdr-1.2.6/PLUGINS/src/hello'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/vdr-1.2.6/PLUGINS/src/hello'
make[1]: Entering directory `/usr/local/src/vdr-1.2.6/PLUGINS/src/osddemo'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/vdr-1.2.6/PLUGINS/src/osddemo'
make[1]: Entering directory `/usr/local/src/vdr-1.2.6/PLUGINS/src/scanner'
g++ -O2 -Wall -Woverloaded-virtual -c -DPLUGIN_NAME_I18N='"scanner"' -D_GNU_SOURCE -I../../../include -I../../../../DVB/include scanner.c
In file included from scanner.c:10:
dvbscanner.h:6: vdr/sections.h: No such file or directory
make[1]: *** [scanner.o] Error 1
make[1]: Leaving directory `/usr/local/src/vdr-1.2.6/PLUGINS/src/scanner'
make[1]: Entering directory `/usr/local/src/vdr-1.2.6/PLUGINS/src/sky'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/vdr-1.2.6/PLUGINS/src/sky'
make[1]: Entering directory `/usr/local/src/vdr-1.2.6/PLUGINS/src/status'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/vdr-1.2.6/PLUGINS/src/status'
p3-900:/usr/local/src/VDR #

mfg . Thomas

Hi Saxman2k ,

sorry für den langen Beitrag , aber der Wust kommt bei dem Befehl raus .
Klappt bei dir der sendersuchlauf ? Wenn Ja was hast du zusätzlich zu VDR
installiert ?

p3-900:/usr/local/src/VDR # make plugins
make[1]: Entering directory `/usr/local/src/VDR/PLUGINS/src/hello'
make[1]: Leaving directory `/usr/local/src/VDR/PLUGINS/src/hello'
make[1]: Entering directory `/usr/local/src/VDR/PLUGINS/src/hello'
g++ -O2 -Wall -Woverloaded-virtual -c -DPLUGIN_NAME_I18N='"hello"' -I../../../include -I../../../../DVB/include hello.c
In file included from ../../../include/vdr/timers.h:15,
from ../../../include/vdr/recording.h:16,
from ../../../include/vdr/svdrp.h:13,
from ../../../include/vdr/interface.h:16,
from hello.c:11:
../../../include/vdr/eit.h: In method `int cSIProcessor::Vpid() const':
../../../include/vdr/eit.h:192: `vpid' undeclared (first use this function)
../../../include/vdr/eit.h:192: (Each undeclared identifier is reported only once
../../../include/vdr/eit.h:192: for each function it appears in.)
../../../include/vdr/eit.h:192: warning: control reaches end of non-void function `cSIProcessor::Vpid() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Apid1() const':
../../../include/vdr/eit.h:193: `apid' undeclared (first use this function)
../../../include/vdr/eit.h:193: warning: control reaches end of non-void function `cSIProcessor::Apid1() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Apid2() const':
../../../include/vdr/eit.h:194: warning: control reaches end of non-void function `cSIProcessor::Apid2() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Dpid1() const':
../../../include/vdr/eit.h:195: `dpid' undeclared (first use this function)
../../../include/vdr/eit.h:195: warning: control reaches end of non-void function `cSIProcessor::Dpid1() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Dpid2() const':
../../../include/vdr/eit.h:196: warning: control reaches end of non-void function `cSIProcessor::Dpid2() const'
../../../include/vdr/eit.h: In method `i
nt cSIProcessor::Tpid() const':
../../../include/vdr/eit.h:197: `tpid' undeclared (first use this function)
../../../include/vdr/eit.h:197: warning: control reaches end of non-void function `cSIProcessor::Tpid() const'
make[1]: *** [hello.o] Error 1
make[1]: Leaving directory `/usr/local/src/VDR/PLUGINS/src/hello'
make[1]: Entering directory `/usr/local/src/VDR/PLUGINS/src/osddemo'
make[1]: Leaving directory `/usr/local/src/VDR/PLUGINS/src/osddemo'
make[1]: Entering directory `/usr/local/src/VDR/PLUGINS/src/osddemo'
g++ -O2 -Wall -Woverloaded-virtual -c -DPLUGIN_NAME_I18N='"osddemo"' -I../../../include -I../../../../DVB/include osddemo.c
In file included from ../../../include/vdr/timers.h:15,
from ../../../include/vdr/recording.h:16,
from ../../../include/vdr/svdrp.h:13,
from ../../../include/vdr/interface.h:16,
from ../../../include/vdr/osd.h:18,
from ../../../include/vdr/menuitems.h:13,
from ../../../include/vdr/plugin.h:14,
from osddemo.c:9:
../../../include/vdr/eit.h: In method `int cSIProcessor::Vpid() const':
../../../include/vdr/eit.h:192: `vpid' undeclared (first use this function)
../../../include/vdr/eit.h:192: (Each undeclared identifier is reported only once
../../../include/vdr/eit.h:192: for each function it appears in.)
../../../include/vdr/eit.h:192: warning: control reaches end of non-void function `cSIProcessor::Vpid() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Apid1() const':
../../../include/vdr/eit.h:193: `apid' undeclared (first use this function)
../../../include/vdr/eit.h:193: warning: control reaches end of non-void function `cSIProcessor::Apid1() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Apid2() const':
../../../include/vdr/eit.h:194: warning: control reaches end of non-void function `cSIProcessor::Apid2() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Dpid1() const':
../../../include/vdr/eit.h:195: `dpid' undeclared (first use this function)
../../../include/vdr/eit.h:195: warning: control reaches end of non-void function `cSIProcessor::Dpid1() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Dpid2() const':
../../../include/vdr/eit.h:196: warning: control reaches end of non-void function `cSIProcessor::Dpid2() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Tpid() const':
../../../include/vdr/eit.h:197: `tpid' undeclared (first use this function)
../../../include/vdr/eit.h:197: warning: control reaches end of non-void function `cSIProcessor::Tpid() const'
make[1]: *** [osddemo.o] Error 1
make[1]: Leaving directory `/usr/local/src/VDR/PLUGINS/src/osddemo'
make[1]: Entering directory `/usr/local/src/VDR/PLUGINS/src/sky'
make[1]: Leaving directory `/usr/local/src/VDR/PLUGINS/src/sky'
make[1]: Entering directory `/usr/local/src/VDR/PLUGINS/src/sky'
g++ -O2 -Wall -Woverloaded-virtual -c -DPLUGIN_NAME_I18N='"sky"' -I../../../include -I../../../../DVB/include sky.c
In file included from ../../../include/vdr/timers.h:15,
from ../../../include/vdr/recording.h:16,
from ../../../include/vdr/svdrp.h:13,
from ../../../include/vdr/interface.h:16,
from ../../../include/vdr/osd.h:18,
from ../../../include/vdr/menuitems.h:13,
from ../../../include/vdr/plugin.h:14,
from sky.c:14:
../../../include/vdr/eit.h: In method `int cSIProcessor::Vpid() const':
../../../include/vdr/eit.h:192: `vpid' undeclared (first use this function)
../../../include/vdr/eit.h:192: (Each undeclared identifier is reported only once
../../../include/vdr/eit.h:192: for each function it appears in.)
../../../include/vdr/eit.h:192: warning: control reaches end of non-void function `cSIProcessor::Vpid() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Apid1() const':
../../../include/vdr/eit.h:193: `apid' undeclared (first use this function)
../../../include/vdr/eit.h:193: warning: control reaches end of non-void function `cSIProcessor::Apid1() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Apid2() const':
../../../include/vdr/eit.h:194: warning: control reaches end of non-void function `cSIProcessor::Apid2() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Dpid1() const':
../../../include/vdr/eit.h:195: `dpid' undeclared (first use this function)
../../../include/vdr/eit.h:195: warning: control reaches end of non-void function `cSIProcessor::Dpid1() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Dpid2() const':
../../../include/vdr/eit.h:196: warning: control reaches end of non-void function `cSIProcessor::Dpid2() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Tpid() const':
../../../include/vdr/eit.h:197: `tpid' undeclared (first use this function)
../../../include/vdr/eit.h:197: warning: control reaches end of non-void function `cSIProcessor::Tpid() const'
make[1]: *** [sky.o] Error 1
make[1]: Leaving directory `/usr/local/src/VDR/PLUGINS/src/sky'
make[1]: Entering directory `/usr/local/src/VDR/PLUGINS/src/status'
make[1]: Leaving directory `/usr/local/src/VDR/PLUGINS/src/status'
make[1]: Entering directory `/usr/local/src/VDR/PLUGINS/src/status'
g++ -O2 -Wall -Woverloaded-virtual -c -DPLUGIN_NAME_I18N='"status"' -I../../../include -I../../../../DVB/include status.c
In file included from ../../../include/vdr/timers.h:15,
from ../../../include/vdr/recording.h:16,
from ../../../include/vdr/svdrp.h:13,
from ../../../include/vdr/interface.h:16,
from ../../../include/vdr/osd.h:18,
from ../../../include/vdr/menuitems.h:13,
from ../../../include/vdr/plugin.h:14,
from status.c:9:
../../../include/vdr/eit.h: In method `int cSIProcessor::Vpid() const':
../../../include/vdr/eit.h:192: `vpid' undeclared (first use this function)
../../../include/vdr/eit.h:192: (Each undeclared identifier is reported only once
../../../include/vdr/eit.h:192: for each function it appears in.)
../../../include/vdr/eit.h:192: warning: control reaches end of non-void function `cSIProcessor::Vpid() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Apid1() const':
../../../include/vdr/eit.h:193: `apid' undeclared (first use this function)
../../../include/vdr/eit.h:193: warning: control reaches end of non-void function `cSIProcessor::Apid1() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Apid2() const':
../../../include/vdr/eit.h:194: warning: control reaches end of non-void function `cSIProcessor::Apid2() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Dpid1() const':
../../../include/vdr/eit.h:195: `dpid' undeclared (first use this function)
../../../include/vdr/eit.h:195: warning: control reaches end of non-void function `cSIProcessor::Dpid1() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Dpid2() const':
../../../include/vdr/eit.h:196: warning: control reaches end of non-void function `cSIProcessor::Dpid2() const'
../../../include/vdr/eit.h: In method `int cSIProcessor::Tpid() const':
../../../include/vdr/eit.h:197: `tpid' undeclared (first use this function)
../../../include/vdr/eit.h:197: warning: control reaches end of non-void function `cSIProcessor::Tpid() const'
make[1]: *** [status.o] Error 1
make[1]: Leaving directory `/usr/local/src/VDR/PLUGINS/src/status'
make: *** [plugins] Error 2

mfg Thomas

Hi ,
leider habe ich keine Anleitung gefunden , wie man den SCANNPLUGIN installiert.
Der Versuch mit MAKE scheitert.
Habe ich das falsche Verzeichnis gewählt ?
Womit scannt Ihr erfolgreich , und wie habt Ihr das Ding installiert?

Verzeichnis der Scannerdateien:
p3-900:/usr/local/src/VDR/PLUGINS/scanner # ls -l
================================================================

total 61
drwxr-xr-x 2 root root 320 Jan 16 18:58 .
drwxr-xr-x 5 tom users 392 Jan 19 18:41 ..
-rw-r--r-- 1 root root 173 Jan 16 18:58 .dependencies
-rw-r--r-- 1 root root 18009 Sep 19 23:31 COPYING
-rw-r--r-- 1 root root 260 Sep 19 23:31 HISTORY
-rw-r--r-- 1 root root 1980 Sep 19 23:31 Makefile
-rw-r--r-- 1 root root 240 Sep 19 23:31 README
-rw-r--r-- 1 root root 7194 Sep 19 23:31 dvbscanner.c
-rw-r--r-- 1 root root 1043 Sep 19 23:31 dvbscanner.h
-rw-r--r-- 1 root root 461 Sep 19 23:31 i18n.c
-rw-r--r-- 1 root root 286 Sep 19 23:31 i18n.h
-rw-r--r-- 1 root root 2452 Sep 19 23:31 scanner.c
Kompilierversuch mit MAKE:
================================================================
p3-900:/usr/local/src/VDR/PLUGINS/scanner # make
g++ -O2 -Wall -Woverloaded-virtual -c -DPLUGIN_NAME_I18N='"scanner"' -D_GNU_SOURCE -I../../../include -I../../../../DVB/include scanner.c
scanner.c:9: vdr/plugin.h: No such file or directory
In file included from scanner.c:10:
dvbscanner.h:4: vdr/device.h: No such file or directory
dvbscanner.h:5: vdr/dvbdevice.h: No such file or directory
dvbscanner.h:6: vdr/sections.h: No such file or directory
In file included from scanner.c:11:
i18n.h:12: vdr/i18n.h: No such file or directory
make: *** [scanner.o] Error 1
p3-900:/usr/local/src/VDR/PLUGINS/scanner #

mfg Thomas

Hi Leute ,

Linvdr funktioniert zwar , aber mit der Kanalsuche gibt es Probleme.
Trotz Intensivster Suche im Forum habe ich keine Anleitung gefunden , wie man
den Scannplugin instaliert und mit welchen Befehlen der Suchvorgang gestartet wird.
Viele haben auch Probleme mit dem Patch Autopid .
Mit welchem Scanntool habt Ihr gute Erfahrungen gemacht ?

mfg Thomas

Hi ,

das Modul aic7xxx für meinen SCSI-Controler Adaptec 2940U startet nicht automatisch ,
obwohl ich es beim Kernel kompilieren berücksichtigt habe .
mit modprobe läßt es sich starten .

vielen Dank für eure Ideen im Voraus.

Thomas

Hi Ronny ,

...da bin ich wieder . Tatsächlich hat QT3 gefehlt . ./CONFIGURE läuft ohne Fehler durch ,
dafür funktioniert make nicht

p3-900:/usr/local/kde/bin/kvdr # make
make all-recursive
make[1]: Entering directory `/usr/local/kde/bin/kvdr'
Making all in kvdr
make[2]: Entering directory `/usr/local/kde/bin/kvdr/kvdr'
Making all in docs
make[3]: Entering directory `/usr/local/kde/bin/kvdr/kvdr/docs'
Making all in en
make[4]: Entering directory `/usr/local/kde/bin/kvdr/kvdr/docs/en'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/usr/local/kde/bin/kvdr/kvdr/docs/en'
make[4]: Entering directory `/usr/local/kde/bin/kvdr/kvdr/docs'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/usr/local/kde/bin/kvdr/kvdr/docs'
make[3]: Leaving directory `/usr/local/kde/bin/kvdr/kvdr/docs'
make[3]: Entering directory `/usr/local/kde/bin/kvdr/kvdr'
g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/kde2/include -I/usr/lib/qt3/include -I/usr/X11R6/include -O2 -fno-exceptions -fno-check-new -c kvdr_meta_unload.cpp
kvdr_meta_unload.cpp: In function `void unload_kvdr(const char **)':
kvdr_meta_unload.cpp:6: `objectDict' undeclared (first use this function)
kvdr_meta_unload.cpp:6: (Each undeclared identifier is reported only once
kvdr_meta_unload.cpp:6: for each function it appears in.)
make[3]: *** [kvdr_meta_unload.o] Error 1
make[3]: Leaving directory `/usr/local/kde/bin/kvdr/kvdr'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/usr/local/kde/bin/kvdr/kvdr'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/local/kde/bin/kvdr'
make: *** [all-recursive-am] Error 2

mfg. Thomas

Hi Leute ,

KVDR Version kvdr-0.61.tgz lässt sich bei mir nicht installieren.
Die Installaton des DVB -Treibers linux-dvb.2003-11-08.tar.bz2 und VDR: vdr-1.2.6.tar.bz2
lief problemlos.
Mit KVDR möchte ich die Ausgabe auf den PC-Monitor umleiten.

Fehlermeldung bei Befehl ./configure
=========================================
checking for extra libs... no
checking for libz... -lz
checking for libpng... no
checking for libjpeg6b... no
checking for libjpeg... -ljpeg
checking for Qt... configure: error: Qt (>= Qt 2.2.2) (headers and libraries) not found. Please check your installation!
For more details about this problem, look at the end of config.log.
p3-900:/usr/local/kde/bin/kvdr #

Fehler make und make install
======================================================
p3-900:/usr/local/kde/bin/kvdr # make
make: *** No targets specified and no makefile found. Stop.
p3-900:/usr/local/kde/bin/kvdr #
p3-900:/usr/local/kde/bin/kvdr #
p3-900:/usr/local/kde/bin/kvdr # make install
make: *** No rule to make target `install'. Stop.
p3-900:/usr/local/kde/bin/kvdr #

aus der Meldung von config.log werd ich nicht schlau

mfg. Thomas

Hi Olaf ,

die Sache mit dem Nvidia- Treiber für die GE-Force 4 hat sich erledigt.
Mein Fehler war , daß ich nach der Anleitung (NVIDIA-Seite) für Suse 8.0 vorgegangen bin .
Mein Kernel ist aber selfmade Version 2.4.22 und hat mit SuSE8.0 nicht mehr viel gemein .
Mit sh NVIDIA-Linux-x86-1.0-4496-pkg2.run und anschließendem SAX2 funktionierts.

mfg . Thomas

Hi Leute ,

meine GE-Force4 TI 4200 funktioniert mit meinem selbstgebauten Kernel 2.4.22
von der kernel.org Seite nicht.
SAX2 meldet Fehler beim Laden von nvidia-Modul .
die 2 Packete von Nvidia NV-GLX und NV-Kernel sind installiert.
Bei der SUSE 8.0 Standardinstallation lief die Grafikkarte nach der Installation
der beiden Packete.

mfg. Thomas

Hi thom01 ,

der Tipp mit ALSA war gut . Ich hab die Module snd-* mit den ALSA-Sourcen
generiert und die SB-LIVE läuft .
Tolle Sache .

mfg. Thomas

Hi Leute ,

mit den Kernelquellen 2.4.9 von der linvdr.org -Seite würde ich gerne einen
kernel basteln.
Es entsteht aber das Mudul SND-EMU10k1 NICHT !! , das von meiner Soundkarte
Creativ Soundblaster Live Value benötigt wird.
Welche Optionen muß ich bei .config angeben (make menuconfig ) ???

mfg . Thomas

Hi VDR-Bastler ,

als Benutzer von SuSE 8.0 (Standardkernel ) tritt bei dem Befehl make insmod
========
folgender Fehler auf:
==========================================
saa7146_core.o: unresolved symbol kmap_pagetable
saa7146_core.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.

saa7146_v4l.o: unresolved symbol saa7146_del_extension
saa7146_v4l.o: unresolved symbol saa7146_add_extension
saa7146_v4l.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.

Hab ich es mit einer Lizenz - Geschichte zu tun ?

mfg. Thomas

Hi Jörg ,
ich habs nochmal mit SUSE 8.0 Standardkernelpacket und vorherigem make clean && make verucht.
Vielleicht kannst du mit dem kompletten Vorgang was anfangen .

p3-900:/DVB/DVB/driver # make
=======================================
/usr/src/linux/scripts/pathdown.sh: TOPDIR: parameter null or not set
DIR=`pwd`; (cd /usr/src/linux; make SUBDIRS=$DIR modules)
make[1]: Entering directory `/usr/src/linux-2.4.18.SuSE'
make -C /DVB/DVB/driver CFLAGS="-D__KERNEL__ -I/usr/src/linux-2.4.18.SuSE/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE" MAKING_MODULES=1 modules
make[2]: Entering directory `/DVB/siemens_dvb-0.9.4-2002-05-20/driver'
make[2]: Nothing to be done for `modules'.
make[2]: Leaving directory `/DVB/siemens_dvb-0.9.4-2002-05-20/driver'
make[1]: Leaving directory `/usr/src/linux-2.4.18.SuSE'

p3-900:/DVB/DVB/driver # make insmod
===================================================================
/usr/src/linux/scripts/pathdown.sh: TOPDIR: parameter null or not set
./makedev.napi
make
make[1]: Entering directory `/DVB/siemens_dvb-0.9.4-2002-05-20/driver'
DIR=`pwd`; (cd /usr/src/linux; make SUBDIRS=$DIR modules)
make[2]: Entering directory `/usr/src/linux-2.4.18.SuSE'
make -C /DVB/DVB/driver CFLAGS="-D__KERNEL__ -I/usr/src/linux-2.4.18.SuSE/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE" MAKING_MODULES=1 modules
make[3]: Entering directory `/DVB/siemens_dvb-0.9.4-2002-05-20/driver'
make[3]: Nothing to be done for `modules'.
make[3]: Leaving directory `/DVB/siemens_dvb-0.9.4-2002-05-20/driver'
make[2]: Leaving directory `/usr/src/linux-2.4.18.SuSE'

make[1]: Leaving directory `/DVB/siemens_dvb-0.9.4-2002-05-20/driver'
( \
insmod dvbdev.o; \
insmod dvb_net.o; \
insmod i2c-core; \
insmod videodev; \
insmod dvb_filter.o; \
insmod dmxdev.o; \
insmod VES1893.o; \
insmod VES1820.o; \
insmod L64781.o; \
insmod SP8870.o debug=1; \
insmod tda8083.o; \
insmod stv0299.o; \
insmod tuner.o; \
insmod saa7146_core.o mode=0; \
insmod saa7146_v4l.o; \
insmod dvb_demux.o; \
insmod dvb_frontend.o; \
insmod dvb.o init_chan=2 pids_off=0; \
)
Warning: loading dvbdev.o will taint the kernel: non-GPL license - LGPL
Using /lib/modules/2.4.18-4GB/kernel/drivers/i2c/i2c-core.o
Using /lib/modules/2.4.18-4GB/kernel/drivers/media/video/videodev.o
Warning: loading tuner.o will taint the kernel: no license
saa7146_core.o: unresolved symbol kmap_pagetable
saa7146_core.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.

saa7146_v4l.o: unresolved symbol saa7146_del_extension
saa7146_v4l.o: unresolved symbol saa7146_add_extension
saa7146_v4l.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.

dvb.o: unresolved symbol saa7146_del_extension
dvb.o: unresolved symbol saa7146_get_handle
dvb.o: unresolved symbol saa7146_add_extension
make: *** [insmod] Error 1
p3-900:/DVB/DVB/driver #

mfg. Thomas

Hi Georg ,

du hattest Recht das Packet gpp fehlte . Der DVB-Treber lässt sich endilch übersetzen .
1. ERFOLG !!
Allerdings habe ich jetzt Probleme mit MAKE INSMOD.

Fehlermeldung mit Kernel 2.4.1.8 der linvdr.org Seite (MAKE INSMOD )
======================================================================
saa7146_core.o: kernel-module version mismatch
saa7146_core.o was compiled for kernel version 2.4.18
while this kernel is version 2.4.18-4GB.
saa7146_v4l.o: kernel-module version mismatch
saa7146_v4l.o was compiled for kernel version 2.4.18
while this kernel is version 2.4.18-4GB.
insmod: a module named dvb_demux already exists
insmod: a module named dvb_frontend already exists
dvb.o: kernel-module version mismatch
dvb.o was compiled for kernel version 2.4.18
while this kernel is version 2.4.18-4GB.
make: *** [insmod] Error 1
p3-900:/DVB/siemens_dvb-0.9.4-2002-05-20/driver #

Fehlermeldung mit Standardkernel 2.4.18-4GB SuSE 8.0 (MAKE INSMOD )
==========================================================
saa7146_core.o: unresolved symbol kmap_pagetable
saa7146_core.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.

saa7146_v4l.o: unresolved symbol saa7146_del_extension
saa7146_v4l.o: unresolved symbol saa7146_add_extension
saa7146_v4l.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.

insmod: a module named dvb_demux already exists
insmod: a module named dvb_frontend already exists
dvb.o: unresolved symbol saa7146_del_extension
dvb.o: unresolved symbol saa7146_get_handle
dvb.o: unresolved symbol saa7146_add_extension
make: *** [insmod] Error 1
p3-900:/DVB/DVB/driver #

Der Kernel 2.4.18 der org-Seite wurde von mir nur nach /usr/src Kopiert und nicht neu komiliert .
Haben die User von SuSe 8.0 ihren Kernel für LINVDR selbst gebastelt ?

Hi ePogo ,

ich bin nach der Beschreibung von mikrosaft SuSE 8.1 Prof, Hauppauge Nexus 2.1 und LIRC für Newbies
vorgegengen und alle genannten Pakete installiert.
Die Problematik ist die selbe.
welche Kernelversion ist für LINVDR notwendig (mein ist 2.4.18 )?
müssen Treiberversion und kernelverion zusammenpassen ?
muß der kernel modifiziert werden ?

mfg. hugovdr

Hi Leute ,

der DVB-Treiber siemens_dvb-0.9.4-2002-05-20 läßt sich bei mir nicht mit make kompilieren.
Ich benutze SUSE-LINUX 8.0 Prof ( Standardkernel ) .
Als Fehlermeldung erscheint :
usr/src/linux/scripts/pathdown.sh TOPDIR parameter null or not set
DIR='pwd'; (cd /usr/src/linux; make SUBDIR=$ DIR modules)
g++ -02 fdump fdump.cc
make[3] g++ command not found
make[3] fdump error 127

als nächstes habe ich mir das kernelpaket 2.418 von der linvdr.org-seite geladen und der kernel
laut beschreibung kompiliert----resultat: kernelpanic (URSACHE: Reiser-FS als Modul )

2.Versuch : Reiser -FS im kernel eingebettet ---SYSTEM BOOTET , dafü ist aber ein RESOURCENKONFLIKT
entstanden. IRQ-Sharing der Komponenten SCSI-Controller , SOUND-CARD funktioniert nicht mehr und der X-Server läßt sich nicht starten. Diese Probleme hatte ich mit der Standartinstallation micht.
Wie aktiviere ich IRQ-SHARING (IRQ 5) im Kernel ?

Ich bin Euch für jeden tipp dankbar .