Beiträge von Kritaya
-
-
hilf mir mal bitte noch auf die Sprünge. Wenn ich Taste "down" drücke und loslasse, kommt
CodeEvent: time 1325776440.243817, type 4 (Misc), code 4 (ScanCode), value 70051 Event: time 1325776440.243829, type 1 (Key), code 108 (Down), value 1 Event: time 1325776440.243831, -------------- Report Sync ------------ Event: time 1325776440.251815, type 4 (Misc), code 4 (ScanCode), value 70051 Event: time 1325776440.251823, type 1 (Key), code 108 (Down), value 0 Event: time 1325776440.251827, -------------- Report Sync ------------
bei Taste "1"
CodeEvent: time 1325776596.683820, type 4 (Misc), code 4 (ScanCode), value 7001e Event: time 1325776596.683828, type 1 (Key), code 2 (1), value 1 Event: time 1325776596.683831, -------------- Report Sync ------------ Event: time 1325776596.691815, type 4 (Misc), code 4 (ScanCode), value 7001e Event: time 1325776596.691824, type 1 (Key), code 2 (1), value 0 Event: time 1325776596.691827, -------------- Report Sync ------------
In die mce.evmap trage ich also was dann ein?
KEY_DOWN =KEY_DOWN
KEY_NUMERIC_1 =KEY_1 #Taste 1 (stand schon drin) -
Was sagt denn evtest zu dem Gerät? Gleiche Tastenbelegung wie hier: Hauppauge Fernbedienung an USB Empfänger von Skystar 2, Formosa Industrial Computing .
Ist identisch mit meinem Ergebnis.
-
war sogar dein Beitrag^^: http://www.vdr-portal.de/board60-linux/board14-betriebssystem/board96-yavdr/p1030020-hauppauge-fernbedienung-an-usb-empfänger-von-skystar-2-formosa-industrial-computing/#post1030020
Coderoot@VDR:~# lsusb Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 147a:e02d Formosa Industrial Computing, Inc. Bus 003 Device 002: ID 04d9:0462 Holtek Semiconductor, Inc. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Code
Alles anzeigenI: Bus=0003 Vendor=147a Product=e02d Version=0110 N: Name="USB IR Receiver USB IR Receiver" P: Phys=usb-0000:00:02.0-3/input0 S: Sysfs=/devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input4 U: Uniq= H: Handlers=sysrq kbd event4 B: PROP=0 B: EV=10001b B: KEY=e080ffdf01cfffff fffffffffffffffe B: ABS=30000000000 B: MSC=10
-
Danke für die schnelle Antwort. Unter "Einstellungen - Einstellung der Fernbedienung" ist kein Haken bei "LIRC support", und unter "System - LIRC Konfiguration" steht:
Code
Alles anzeigen# /etc/lirc/hardware.conf # #Chosen Remote Control REMOTE="100TS035" REMOTE_MODULES="lirc_dev lirc_serial" REMOTE_DRIVER="" REMOTE_DEVICE="/dev/lirc0" REMOTE_LIRCD_CONF="" REMOTE_LIRCD_ARGS="" #Chosen IR Transmitter TRANSMITTER="None" TRANSMITTER_MODULES="" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" #Enable lircd START_LIRCD="false" #Don't start lircmd even if there seems to be a good config file #START_LIRCMD="false" #Try to load appropriate kernel modules LOAD_MODULES="true" # Default configuration files for your hardware if any LIRCMD_CONF="" #Forcing noninteractive reconfiguration #If lirc is to be reconfigured by an external application #that doesn't have a debconf frontend available, the noninteractive #frontend can be invoked and set to parse REMOTE and TRANSMITTER #It will then populate all other variables without any user input #If you would like to configure lirc via standard methods, be sure #to leave this set to "false" FORCE_NONINTERACTIVE_RECONFIGURATION="false" START_LIRCMD="" REMOTE_SOCKET="" TRANSMITTER_SOCKET="" -------------------------------------------------------------------------------------------------------
-
Hiho,
lese und bastle nun schon seit Neujahr. Hab mir YaVDR 0.4 installiert, weil ich noch ne Skystar2 hatte. Nun funktioniert soweit alles, hatte vorhin einen Beitrag, wo man "stop eventlirc" und dann Tasten testen sollte und habe mich gefreut, dass, warum auch immer, plötzlich die FB (TTS35ai) funktioniert. Dann sollte man den Test stoppen und eventlirc wieder starten. Hmmm, FB geht wieder nicht?! Eventlirc gestoppt, geht wieder? Kann mir hier wer das eklären und weiterhelfen?
Danke euch im Voraus.