Beiträge von cedric!

cedric! · 28. Juli 2011

I have just rebooted my system, no change.

Oddly, scan (from
linuxtv-dvb-apps) works fine:

Code

$ scan /usr/share/dvb/dvb-t/nl-All -o zap
scanning /usr/share/dvb/dvb-t/nl-All
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 474000000 0 1 9 3 1 3 0
initial transponder 474000000 0 2 9 3 1 3 0
initial transponder 482000000 0 1 9 3 1 3 0
initial transponder 490000000 0 2 9 3 1 3 0
initial transponder 498000000 0 2 9 3 1 3 0
initial transponder 514000000 0 1 9 3 1 3 0
initial transponder 538000000 0 1 9 3 1 3 0
<snip>
>>> tune to: 474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
<snip>
>>> tune to: 498000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
0x0000 0x001f: pmt_pid 0x0bc2 Digitenne -- Veronica/Disney XD (running, scrambled)
0x0000 0x0020: pmt_pid 0x0bcc Digitenne -- RTL 8 (running, scrambled)
0x0000 0x0021: pmt_pid 0x0bd6 Digitenne -- ��n (running, scrambled)
0x0000 0x0022: pmt_pid 0x0be0 Digitenne -- Ketnet/Canvas (running, scrambled)
0x0000 0x0023: pmt_pid 0x0bea Digitenne -- KinderNet/Comedy Central (running, scrambled)
0x0000 0x0024: pmt_pid 0x0bf4 Digitenne -- Discovery Channel (running, scrambled)
0x0000 0x0025: pmt_pid 0x0bfe Digitenne -- Eurosport (running, scrambled)
0x0000 0x0026: pmt_pid 0x0c08 Digitenne -- Meiden van Holland Hard (running, scrambled)
Network Name ''
>>> tune to: 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!

Alles anzeigen

best regards,
Cedric

cedric! · 28. Juli 2011

Hi All,

I do the following:
$ dvbscan -out vdr13 /usr/share/dvb/dvb-t/nl-All

I see one core goes to 100%, and nothing else happen.
I have the following dvb-t stick:

Code

Jul 28 20:06:07 localhost kernel: [84585.998292] usb 1-1: new high speed USB device number 5 using ehci_hcd
Jul 28 20:06:07 localhost kernel: [84586.122989] dvb-usb: found a 'Pinnacle PCTV 73e SE' in cold state, will try to load a firmware
Jul 28 20:06:07 localhost kernel: [84586.124723] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
Jul 28 20:06:07 localhost kernel: [84586.331482] dib0700: firmware started successfully.
Jul 28 20:06:08 localhost kernel: [84586.831776] dvb-usb: found a 'Pinnacle PCTV 73e SE' in warm state.
Jul 28 20:06:08 localhost kernel: [84586.831862] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jul 28 20:06:08 localhost kernel: [84586.832013] DVB: registering new adapter (Pinnacle PCTV 73e SE)
Jul 28 20:06:08 localhost kernel: [84587.039993] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
Jul 28 20:06:08 localhost kernel: [84587.245503] DiB0070: successfully identified
Jul 28 20:06:08 localhost kernel: [84587.245519] Registered IR keymap rc-dib0700-rc5
Jul 28 20:06:08 localhost kernel: [84587.245723] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/rc/rc4/input17
Jul 28 20:06:08 localhost kernel: [84587.245822] rc4: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/rc/rc4
Jul 28 20:06:08 localhost kernel: [84587.245989] dvb-usb: schedule remote query interval to 50 msecs.
Jul 28 20:06:08 localhost kernel: [84587.245995] dvb-usb: Pinnacle PCTV 73e SE successfully initialized and connected.
Jul 28 20:06:08 localhost mtp-probe: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1"
Jul 28 20:06:08 localhost mtp-probe: bus: 1, device: 5 was not an MTP device

Alles anzeigen

What can I do here?

Best regards,
Cedric

cedric! · 28. Juli 2011

Hi All,

I am following this guide:
https://sourceforge.net/apps/trac/archvdr/wiki/ArchVDR

Everything is going smoothly, until i start vdr:
# /etc/rc.d/vdr start
Starting Linux Video Disk Recorder: vdr
Searching for plugins (VDR 1.7.19/1.7.19) (cache hit): dvbsddevice xine.

This is what I see in everything.log. vdr runs for a few seconds, then trips on something.

Code

Jul 27 21:39:20 localhost vdr: [27444] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 27 21:39:20 localhost vdr: [27495] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 27 21:39:20 localhost vdr: [27495] VDR version 1.7.19 started
Jul 27 21:39:20 localhost vdr: [27495] switched to user 'vdr'
Jul 27 21:39:20 localhost vdr: [27495] codeset is 'UTF-8' - known
Jul 27 21:39:20 localhost vdr: [27495] found 0 locales in /usr/share/locale
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'deu,ger'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'slv,slo'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'ita'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'dut,nla,nld'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'por'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'fra,fre'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'nor'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'fin,suo'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'pol'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'esl,spa'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'ell,gre'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'sve,swe'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'rom,rum'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'hun'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'cat,cln'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'rus'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'srb,srp,scr,scc'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'hrv'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'est'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'dan'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'cze,ces'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'tur'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'ukr'
Jul 27 21:39:20 localhost vdr: [27495] no locale for language code 'ara'
Jul 27 21:39:20 localhost vdr: [27495] loading plugin: /usr/lib/vdr/plugins/libvdr-dvbsddevice.so.1.7.19
Jul 27 21:39:20 localhost vdr: [27495] loading plugin: /usr/lib/vdr/plugins/libvdr-xine.so.1.7.19
Jul 27 21:39:20 localhost vdr: [27495] loading /var/lib/vdr/setup.conf
Jul 27 21:39:20 localhost vdr: [27495] loading /var/lib/vdr/sources.conf
Jul 27 21:39:20 localhost vdr: [27495] loading /var/lib/vdr/diseqc.conf
Jul 27 21:39:20 localhost vdr: [27495] loading /var/lib/vdr/channels.conf
Jul 27 21:39:20 localhost vdr: [27495] loading /var/lib/vdr/commands.conf
Jul 27 21:39:20 localhost vdr: [27495] loading /var/lib/vdr/reccmds.conf
Jul 27 21:39:20 localhost vdr: [27495] loading /var/lib/vdr/svdrphosts.conf
Jul 27 21:39:20 localhost vdr: [27495] loading /var/lib/vdr/remote.conf
Jul 27 21:39:20 localhost vdr: [27495] loading /var/lib/vdr/keymacros.conf
Jul 27 21:39:20 localhost vdr: [27495] reading EPG data from /var/cache/vdr/epg.data
Jul 27 21:39:20 localhost vdr: [27495] registered source parameters for 'A - ATSC'
Jul 27 21:39:20 localhost vdr: [27495] registered source parameters for 'C - DVB-C'
Jul 27 21:39:20 localhost vdr: [27495] registered source parameters for 'S - DVB-S'
Jul 27 21:39:20 localhost vdr: [27495] registered source parameters for 'T - DVB-T'
Jul 27 21:39:20 localhost vdr: [27495] no DVB device found
Jul 27 21:39:20 localhost vdr: [27495] initializing plugin: dvbsddevice (0.0.4): SD Full Featured DVB device
Jul 27 21:39:20 localhost vdr: [27495] initializing plugin: xine (0.9.4): Software based playback using xine
Jul 27 21:39:20 localhost vdr: [27495] new device number 9
Jul 27 21:39:20 localhost vdr: [27495] setting primary device to 1
Jul 27 21:39:20 localhost vdr: [27495] assuming manual start of VDR
Jul 27 21:39:20 localhost vdr: [27495] SVDRP listening on port 2001
Jul 27 21:39:20 localhost vdr: [27495] skin "spockele" not available - using "classic" instead
Jul 27 21:39:20 localhost vdr: [27495] loading /var/lib/vdr/themes/classic-default.theme
Jul 27 21:39:20 localhost vdr: [27495] starting plugin: dvbsddevice
Jul 27 21:39:20 localhost vdr: [27495] starting plugin: xine
Jul 27 21:39:20 localhost vdr: [27495] stopping plugin: dvbsddevice
Jul 27 21:39:20 localhost vdr: [27498] XineRemote control thread started (pid=27495, tid=27498)
Jul 27 21:39:20 localhost vdr: [27498] Entering cXineRemote thread
Jul 27 21:39:20 localhost vdr: [27497] video directory scanner thread started (pid=27495, tid=27497)
Jul 27 21:39:20 localhost vdr: [27497] video directory scanner thread ended (pid=27495, tid=27497)
Jul 27 21:39:20 localhost vdr: [27496] video directory scanner thread started (pid=27495, tid=27496)
Jul 27 21:39:20 localhost vdr: [27496] video directory scanner thread ended (pid=27495, tid=27496)
Jul 27 21:39:23 localhost vdr: [27495] ERROR: XineRemote control thread 27498 won't end (waited 3 seconds) - canceling it...
Jul 27 21:39:23 localhost vdr: [27495] deleting plugin: xine
Jul 27 21:39:23 localhost vdr: [27495] deleting plugin: dvbsddevice
Jul 27 21:39:23 localhost vdr: [27495] max. latency time 0 seconds
Jul 27 21:39:23 localhost vdr: [27495] exiting, exit code 2
Jul 27 21:39:23 localhost runvdr: stopping after fatal fail (-------------------------
MakePrimaryDevice: 1
=========================
SetVideoFormat: 1
SetVolumeDevice: 255
bind failed.: Invalid argument)

Alles anzeigen

When I remove -p from /etc/vdr/plugins/plugin.xine.conf, (the only thing that's in the file is -r) vdr keeps running. Then everything.log shows me this:

Code

Jul 27 21:41:28 localhost vdr: [27513] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 27 21:41:28 localhost vdr: [27564] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 27 21:41:28 localhost vdr: [27564] VDR version 1.7.19 started
Jul 27 21:41:28 localhost vdr: [27564] switched to user 'vdr'
Jul 27 21:41:28 localhost vdr: [27564] codeset is 'UTF-8' - known
Jul 27 21:41:28 localhost vdr: [27564] found 0 locales in /usr/share/locale
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'deu,ger'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'slv,slo'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'ita'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'dut,nla,nld'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'por'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'fra,fre'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'nor'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'fin,suo'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'pol'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'esl,spa'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'ell,gre'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'sve,swe'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'rom,rum'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'hun'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'cat,cln'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'rus'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'srb,srp,scr,scc'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'hrv'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'est'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'dan'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'cze,ces'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'tur'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'ukr'
Jul 27 21:41:28 localhost vdr: [27564] no locale for language code 'ara'
Jul 27 21:41:28 localhost vdr: [27564] loading plugin: /usr/lib/vdr/plugins/libvdr-dvbsddevice.so.1.7.19
Jul 27 21:41:28 localhost vdr: [27564] loading plugin: /usr/lib/vdr/plugins/libvdr-xine.so.1.7.19
Jul 27 21:41:28 localhost vdr: [27564] loading /var/lib/vdr/setup.conf
Jul 27 21:41:28 localhost vdr: [27564] loading /var/lib/vdr/sources.conf
Jul 27 21:41:28 localhost vdr: [27564] loading /var/lib/vdr/diseqc.conf
Jul 27 21:41:28 localhost vdr: [27564] loading /var/lib/vdr/channels.conf
Jul 27 21:41:28 localhost vdr: [27564] loading /var/lib/vdr/commands.conf
Jul 27 21:41:28 localhost vdr: [27564] loading /var/lib/vdr/reccmds.conf
Jul 27 21:41:28 localhost vdr: [27564] loading /var/lib/vdr/svdrphosts.conf
Jul 27 21:41:28 localhost vdr: [27564] loading /var/lib/vdr/remote.conf
Jul 27 21:41:28 localhost vdr: [27564] loading /var/lib/vdr/keymacros.conf
Jul 27 21:41:28 localhost vdr: [27564] reading EPG data from /var/cache/vdr/epg.data
Jul 27 21:41:28 localhost vdr: [27564] registered source parameters for 'A - ATSC'
Jul 27 21:41:28 localhost vdr: [27564] registered source parameters for 'C - DVB-C'
Jul 27 21:41:28 localhost vdr: [27564] registered source parameters for 'S - DVB-S'
Jul 27 21:41:28 localhost vdr: [27564] registered source parameters for 'T - DVB-T'
Jul 27 21:41:28 localhost vdr: [27564] no DVB device found
Jul 27 21:41:28 localhost vdr: [27564] initializing plugin: dvbsddevice (0.0.4): SD Full Featured DVB device
Jul 27 21:41:28 localhost vdr: [27564] initializing plugin: xine (0.9.4): Software based playback using xine
Jul 27 21:41:28 localhost vdr: [27564] new device number 9
Jul 27 21:41:28 localhost vdr: [27564] setting primary device to 1
Jul 27 21:41:28 localhost vdr: [27564] assuming manual start of VDR
Jul 27 21:41:28 localhost vdr: [27564] SVDRP listening on port 2001
Jul 27 21:41:28 localhost vdr: [27564] skin "spockele" not available - using "classic" instead
Jul 27 21:41:28 localhost vdr: [27564] loading /var/lib/vdr/themes/classic-default.theme
Jul 27 21:41:28 localhost vdr: [27564] starting plugin: dvbsddevice
Jul 27 21:41:28 localhost vdr: [27564] starting plugin: xine
Jul 27 21:41:28 localhost vdr: [27564] skin "spockele" not available - using "classic" instead
Jul 27 21:41:28 localhost vdr: [27564] loading /var/lib/vdr/themes/classic-default.theme
Jul 27 21:41:28 localhost vdr: [27564] ERROR: /dev/lircd: No such file or directory
Jul 27 21:41:28 localhost vdr: [27564] ERROR: remote control XineRemote not ready!
Jul 27 21:41:28 localhost vdr: [27564] ERROR: remote control LIRC not ready!
Jul 27 21:41:28 localhost vdr: [27564] switching to channel 1
Jul 27 21:41:28 localhost vdr: [27564] info: Channel not available!
Jul 27 21:41:28 localhost vdr: [27567] XineRemote control thread started (pid=27564, tid=27567)
Jul 27 21:41:28 localhost vdr: [27567] Entering cXineRemote thread
Jul 27 21:41:28 localhost vdr: [27566] video directory scanner thread started (pid=27564, tid=27566)
Jul 27 21:41:28 localhost vdr: [27566] video directory scanner thread ended (pid=27564, tid=27566)
Jul 27 21:41:28 localhost vdr: [27565] video directory scanner thread started (pid=27564, tid=27565)
Jul 27 21:41:28 localhost vdr: [27565] video directory scanner thread ended (pid=27564, tid=27565)
Jul 27 21:41:30 localhost vdr: [27564] setting watchdog timer to 60 seconds
Jul 27 21:41:30 localhost vdr: [27564] switching to channel 1
Jul 27 21:41:30 localhost vdr: [27564] info: Channel not available!
Jul 27 21:41:32 localhost vdr: [27564] OSD size changed to 1920x1080 @ 1
Jul 27 21:41:32 localhost vdr: [27564] max. latency time 2 seconds
Jul 27 21:41:41 localhost vdr: [27564] switching to channel 1
Jul 27 21:41:41 localhost vdr: [27564] info: Channel not available!

Alles anzeigen

What does -p do?

Best regards,
Cedric

Beiträge von cedric!

dvbscan seems to do nothing, with 100% CPU use

dvbscan seems to do nothing, with 100% CPU use

vdr-plugin-xine is killed by -p