sdb! ok now it works. Thanks a lot.
Beiträge von Mattia77
-
-
ok, i ve understand. But i ve no log, dd write the image without error. But the image doesn t start. it seems that is not a bootable image.
I' ve formatted the usb pen fat32. -
sudo dd if=yavdr64-0.5.0a.hybrid.iso of=/dev/sdb1 is right?
doesn t works
-
More details! I don't know this error. Provide enough information for someone that can't see what you have done and what has happend after this doing.
during the preparation of the usb pen, "Failed to install the bootloader" i the error of usb-creator-gtk.
-
ok, i ve used the hybrid image.
Failed to install the bootloader. -
ciao, i m not be able to do an yavdr startup disk with ubuntu 13.10 and usb-creator-gtk.
-
Have you tried to connect from a host or subnet which is not included in /etc/vdr/plugins/streamdevhosts.conf?
AFAIK all connections from IP addresses included in streamdevhosts.conf are always allowed without authentification.thanks it' works.
-
it doesn't works. i'm using http connection.
-
which is the right streamdev config file, to insert this command:
--auth=<LOGIN:PASSWORD> -
thanks
-
hi, i'm using ubuntu 12.04 with vdr intalled by yavdr ppa repository. I'd like to try softhddevice, but how can i launch it automatically on login?
thanks
-
hi to all, in the lirc wizard there isn t, soundgraph or linux input layer.
-
hi, in ubuntu 12.04 imon works.
-
nothing
if i downgrade the system to lucid o upgrade to oneiric, the modules are the same?
-
thanks for your support, imon works but the dvb card after the worksaround not
-
Hi, after i install linux-media-dkms, for my tt3200, my remote control imon pad doesn't works.
thanks mattia.
-
Error to install linux-media-dkms on ubuntu oneiric from main repo.
CodeFirst Installation: checking all kernels...Building only for 3.0.0-16-genericBuilding for architecture x86_64Building initial module for 3.0.0-16-genericError! Bad return status for module build on kernel: 3.0.0-16-generic (x86_64)Consult /var/lib/dkms/linux-media/0~20120129.git245.289074~oneiric/build/make.log for more information.
thanks
-
thanks to all works and maybe tha problems with hd channel depend xineliboutput-sxfe (buffer overflow)
@dbuser i've seen in your sign that you have a nova s2 hd, which driver you use and especilally which firmware?
-
@Matia77
Oops, sorry for the wrong nick ...
Well, afaik hasn't there been a major nor even a minor change within the driver for this card since the Stone age ...
Means, even if you install v4l or s2-liplianin, you IMHO don't get any other driver. But give v4l-dvb-dkms a try.
Regards
fnuv4l-dvb-dkms works better wscan is ok, and the zapping too. the hd channels have low signal quality.
s2-liplianin, i cannot try, because lirc with my imon doesn't works if i install it. -
If you mean Technotrend S2-3200 (PCI), you don't need any special driver, it is part of kernel since a long time, AFAIK 2.6.18.
Regards
fnuyes i mean s3200 pci
Thanks for your quickly reply, but with yavdr on ubuntu 10.04 works without problems, on natty no.
wscan on hotbird find 800 channels, the zapping is very slow and often fails. femon dosen't works and hd channels have low quality signal.