Hi
versuche seit längerer zeit meine Fujitsu siemens USB DVB-T stick an meiner SMT 7020 zum laufen zu bekommen. verwende ZenVDR update 080122
lsusb gibt folgendes aus
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 13d3:3213 IMC Networks
Bus 001 Device 001: ID 0000:0000
wenn ich mit modprobe das dvb-usb-vp7045 modul lade gib mir dmesg folgendes aus
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1e.0
IO window: 3000-3fff
MEM window: f4100000-f6ffffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x80
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [GRFX] (multi-head: yes rom: yes post: no)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized i810 1.4.0 20030605 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG HM120JC, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:05.2[C] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:01:05.2: EHCI Host Controller
ehci_hcd 0000:01:05.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:01:05.2: irq 10, io mem 0xf4101000
ehci_hcd 0000:01:05.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.2: irq 10, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 12 (level, low) -> IRQ 12
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1f.4: irq 12, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:01:05.0: UHCI Host Controller
uhci_hcd 0000:01:05.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:01:05.0: irq 5, io base 0x00003040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:01:05.1[B] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:01:05.1: UHCI Host Controller
uhci_hcd 0000:01:05.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:01:05.1: irq 9, io base 0x00003060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 1-2: configuration #1 chosen from 1 choice
hub 3-0:1.0: over-current change on port 1
hub 3-0:1.0: over-current change on port 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
KBC0 HUB USB1 USB2 AC97
ACPI: (supports S0 S1 S3 S4 S5)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 132k freed
hw_random: RNG not detected
Linux video capture interface: v2.00
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
cx2388x v4l2 driver version 0.0.6 loaded
intel8x0_measure_ac97_clock: measured 50975 usecs
intel8x0: clocking to 48000
CORE cx88[0]: subsystem: 18ac:dc00, board: Samsung SMT 7020 DVB-S [card=57,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
!!Samsung RESET done.
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:01:04.2[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
cx88[0]/2: found at 0000:01:04.2, rev: 5, irq: 11, latency: 64, mmio: 0xf6000000
ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
cx88[0]/0: found at 0000:01:04.0, rev: 5, irq: 11, latency: 165, mmio: 0xf5000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:01:08.0 to 64
e100: eth0: e100_probe: addr 0xf4100000, irq 7, MAC addr 00:00:F0:20:C5:B8
EXT3 FS on hda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
CIFS VFS: Error connecting to IPv4 socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to IPv4 socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to IPv4 socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
Adding 257032k swap on /dev/hda2. Priority:-1 extents:1 across:257032k
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
i2c /dev entries driver
i810_smbus 0000:00:02.0: i810/i815 i2c device found.
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
CORE cx88[0]: subsystem: 18ac:dc00, board: Samsung SMT 7020 DVB-S [card=57]
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (ST STV0299 DVB-S)...i
i2c_adapter i2c-2: sendbytes: error - bailout.
i2c_adapter i2c-2: sendbytes: error - bailout.
i2c_adapter i2c-2: sendbytes: error - bailout.
i2c_adapter i2c-2: sendbytes: error - bailout.
i2c_adapter i2c-2: sendbytes: error - bailout.
i2c_adapter i2c-2: sendbytes: error - bailout.
i2c_adapter i2c-2: sendbytes: error - bailout.
i2c_adapter i2c-2: sendbytes: error - bailout.
usbcore: registered new driver dvb_usb_vp7045
lsmod sagt
Module Size Used by
dvb_usb_vp7045 7140 0
dvb_usb 17260 1 dvb_usb_vp7045
firmware_class 6752 1 dvb_usb
w83627hf 20144 0
hwmon_vid 1952 1 w83627hf
hwmon 2100 1 w83627hf
i2c_isa 3104 1 w83627hf
stv0299 8200 1
cx88_dvb 14372 0
cx88_vp3054_i2c 3072 1 cx88_dvb
dvb_pll 11236 2 dvb_usb,cx88_dvb
video_buf_dvb 3844 1 cx88_dvb
dvb_core 62184 3 dvb_usb,stv0299,video_buf_dvb
i2c_i810 4196 0
i2c_dev 6308 0
cifs 176692 3
cx8800 24812 0
cx8802 12484 1 cx88_dvb
cx88xx 53444 3 cx88_dvb,cx8800,cx8802
e100 26692 0
ir_common 24836 1 cx88xx
snd_intel8x0 25180 0
snd_ac97_codec 78592 1 snd_intel8x0
snd_ac97_bus 1728 1 snd_ac97_codec
i2c_algo_bit 7048 3 cx88_vp3054_i2c,i2c_i810,cx88xx
compat_ioctl32 832 1 cx8800
snd_pcm_oss 30720 0
snd_mixer_oss 12960 1 snd_pcm_oss
tveeprom 11824 1 cx88xx
btcx_risc 3336 3 cx8800,cx8802,cx88xx
video_buf 17252 5 cx88_dvb,video_buf_dvb,cx8800,cx8802,cx88xx
videodev 18208 2 cx8800,cx88xx
v4l1_compat 10820 2 cx8800,videodev
v4l2_common 18112 2 cx8800,videodev
snd_pcm 62472 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 16132 1 snd_pcm
snd 38180 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
i2c_i801 6828 0
soundcore 6496 1 snd
snd_page_alloc 6696 2 snd_intel8x0,snd_pcm
wenn nun versuche mit w_scan eine neue channel.conf zu serstellen erhalte ich
root@samsung:~# w_scan
w_scan version 20080105
Info: using DVB adapter auto detection.
Info: unable to open frontend /dev/dvb/adapter1/frontend0'
Info: unable to open frontend /dev/dvb/adapter2/frontend0'
Info: unable to open frontend /dev/dvb/adapter3/frontend0'
main:2401: FATAL: ***** NO USEABLE DVB CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.
den VDR habe ich gestoppt
Da ich kein Linux profi bin und schon stunden in forums verbracht habe wäre nett wenn mir jemand helfen könnte.
Gruss martin