Hallo an alle unermüdlichen Helfer!
Habe ein Problem mit der Auflösung am LCD- Fernseher.
(Software+Hardware siehe unten)
Ich würde gern die xorg.conf so umschreiben, das das Bild vom VDR auf
meinen LCD Fernseher passt (1366x768 ), leider sind die Bilder bei TV-Programmen zu groß!
Per Tastatur kann ich sie ändern mit STRG+ALT+PLUS.
Wäre schöner, wenn das automatisiert geschehen würde.
Wer kann mir helfen, möchte meine jetzige Konfig nicht zerschießen!
Meine xorg.conf sieht so aus:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "KeyboardDe" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "dbe"
Load "record"
Load "xtrap"
Load "dri"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse0"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV34 [GeForce FX 5200]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "SVGA"
SubSection "Display"
Modes "800x600" "640x480" "1024x768" "1280x1024"
Depth 1
EndSubSection
SubSection "Display"
Modes "800x600" "640x480" "1024x768" "1280x1024"
Depth 4
EndSubSection
SubSection "Display"
Modes "800x600" "640x480" "1024x768" "1280x1024"
Depth 8
EndSubSection
SubSection "Display"
Modes "800x600" "640x480" "1024x768" "1280x1024"
Depth 15
EndSubSection
SubSection "Display"
Modes "800x600" "640x480" "1024x768" "1280x1024"
Depth 16
EndSubSection
SubSection "Display"
Modes "800x600" "640x480" "1024x768" "1280x1024"
Depth 24
EndSubSection
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "SVGA"
HorizSync 31.5 - 35.1
VertRefresh 50-70
EndSection
Section "Monitor"
Identifier "Generic"
Option "DPMS"
HorizSync 30-70
VertRefresh 50-160
EndSection
Section "Monitor"
Identifier "TV-OUT"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 5-80
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 40-67
# ModeLine "720x576i" 13.88 720 742 808 888 576 580 583 605 +vsync +vsync interlace
ModeLine "800x600@50" 32 800 824 896 1024 600 601 603 628 +hsync +vsync
# ModeLine "720x576@50" 30.1 720 744 816 948 576 577 579 604 +hsync +vsync
# ModeLine "720x576@50" 30.5 720 768 782 1008 576 576 579 592 +hsync +vsync
ModeLine "720x576" 30.4 720 768 782 1008 576 576 579 592 +hsync +vsync
# ModeLine "1080x576" 48.7 1080 1158 1242 1368 576 576 579 592 +hsync +vsync
ModeLine "1024x576" 54.55 1024 1072 1240 1528 576 578 580 595
ModeLine "1080x576" 43.7 1080 1096 1144 1224 576 578 580 595
Modeline "1280x720" 82.8 1280 1358 1848 2048 720 720 722 725
Modeline "1920x1080i" 74.25 1920 1960 2008 2200 1080 1090 1110 1125 +vsync -hsync interlace
#Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 +vsync -hsync
#Modeline "1280x720_60.00" 65.25 1280 1310 1520 1620 720 722 725 730 # 40 pixel sync test
Modeline "1280x720_50.00" 74.25 1280 1680 1720 1976 720 725 730 750 # 40 pixel sync test
Modeline "1280x720_30.00" 74.25 1280 3000 3080 3304 720 725 730 750
Modeline "1280x720_25.00" 74.25 1280 3660 3740 3960 720 725 730 750
Modeline "1280x720_24.00" 74.25 1280 3824 3904 4128 720 725 730 750
Modeline "1080i" 74.250 1920 2008 2048 2200 1080 1084 1094 1125 interlace +hsync +vsync
Mode "720x576"
DotClock 20000 #** VertRefresh 50Hz **
HTimings 720 856 976 1024
VTimings 576 637 643 666
EndMode
EndSection
Section "InputDevice"
Identifier "KeyboardDe"
Driver "keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "KeyboardUS"
Driver "keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "RandR" "on"
Option "blank time" "0"
Option "standby time" "0"
Option "suspend time" "0"
Option "off time" "0"
EndSection
Besten Dank für Eure Hilfe!
Gruß FW