Beiträge von Santeri

Lcdproc-plugin does not work. When i add it, came on startup message "something went wrong"--> sleeping. I have try to change things in .conf with no effect. I have hd44780 lcd and it works in Win. Anyone got it working? Any tips?

http://www.aikala.com/Helsinki.zip

"Helsinki-file" by cp Helsinki /etc/localtime

This is how it works.

Then local time is changed from ETC to EET and time is +2UTC as is should.

Zitat

Originally posted by pidel
Check Settings -> EPG if there´s a channel set for automatic time setting and if so adjust to a channel that uses your timezone.

Yes, automatic setting is on and on on my timezone channel. It changes osd clock but have no effect to EPG. Epg time is same regardles of auto time setting.

What can i do to change EPG times? I have Mahlzeit4.0beta2. EPG is one hour behind. Bios is now in local time, witch is Europe/Helsinki=UTC+2. I have tried many different times no changes. I try to change to /etc/timezone to Europe/Helsinki, no effect. DO i need to change /etc/localtime too? How do i do that? I think that there is any zoneinfo files? Where can i get those?

edit:
Try to change bios time to something like 5 hour earlier, then it changes to UTC+1 time from DVB time-update. I think that i really need to change localtime to something else.

http://www.aikala.com/Helsinki.zip

"Helsinki-file" by cp Helsinki /etc/localtime

This is how it works.

Then local time is changed from ETC to EET and time is +2UTC as is should.

Zitat

Originally posted by pidel
All channels are one hour late? Then it must have something to do with a wrong clock setting. Are you using UTC somewhere? Another idea: Are you using an external epg-Script like tvmovie2vdr or the like?

regards,
pidel

Yes all channels. date and date -u have one hour difference. I dont understand using of UTC? Bios clock is in my time, which is by the way GMT+2 Helsinki. I try to change timezone to Europe/Helsinki, i dont know if that helps. Only nordlicht epg and original.

Bios time is ok. OSD time in upper right corner is OK. But epg times (program starttimes) is one hour late.

Thanks! Only one problem left. When aspect changed last image is left behind and does not left blank. What has to be done? Is it some adjustment with softdevice? Actually only when i change channel this happens. Any ideas? And OSD is one hour behind?

How do i save alsamixer configuration?

Wielen danke! (I supose )

alsamixer did the trick. All was off. Nobody tould me anything about alsamixer.

Everything else is working fine exept sound. Tell me what to do. What files you guru's need. Please help me. Is there some configuration to make about softdevice and sound.

DVB Works. But no sound. System came also very slow(Looks better now). Softdevice is a bit strange.Terminal is left behind vdr, need write blindly /etc/init.d/runvdr stop, then it hold's still. Picture has strips(Maybe signal prob.) Usb and dvb has same IRQ is that a problem?

I removed ralink card. And it was not installed first but problem was same. I try to update. (Have to carry it to basement and connect to eth)

I get back in 10 minutes

one more.

Here are files.

How do i get these infos to my USB-Stick? /mnt/usbhd/ holds my files but how do i get it to stick? mount? something?

So everything is fine so far exept DVB-T card. Old system with linvdr0.7 recognize my card just fine. What is the problem.
scan -o vdr -e 3 fi-Turku
main:1768: FATAL: failed to open'/dev/dvb/adapter0/frontend0': 6 no such device or address

What do i need to do about this?

Firmware is located in /usr/lib/hotplug/firmware/ but wrong one is marked
dvb-ttpci-01.fw ->dvb-ttpci-01-f12623.fw
Should be
dvb-ttpci-01.fw ->dvb-fe-tda10046.fw How can i change that?

/urs/lib/DVB/driver/frontend is empty, is that a problem?

Terratec Cinergy 1200DVB-T

I can´t get these files out of my PVR. But here is txt from lspci -v.

Only this one looks bad.
"05:09.0 Multimedia Controller: Philips Semiconductors SAA7146 (Rev01)
Subsystem: TERRATEC Electronic GmbH: Unknown device 1157
Flags: Bus master, medium devsel, latency 66 IRQ11
Memory at fc501000 (32-Bit, non-prefetchable) [size=512]"

Any advice?

I installed Mahlzeit-ISO 4beta2 With vesa an now i have "no signal" picture. And working remote Is it possible to change menu lang to english or even finland?

Seems to running, but does not recognize my DVB-card. GetDVBCardData shows
"DVB-Device gefunden! Parameter / module für karte
--> 05:09.0 Multimedia Controller: Philips Semiconductors SAA7146 (Rev01)
eingeben? (J/N)

I press J

Then press Enter

It opens nano editor and something needs to be writen, i just dont have a clue what? Anyone Help PLEASE

Scan function, offcourse, dos not work. So no channels is set.

Is it possible to LinVDR work with only Buddget card? 1.7GHz Celeron with 1G memory and Terretec cinergy 1200T-DVB-T card? Output will be in FujitsuSiemens 32" lcd-tv with VGA-input. What kernel will work with this system. I have succesfully scanned channells but nothing came to monitor? I have integ graphiccard, is that a problem?