ivtv-fb lade ich nicht, um genau zu seien habe ich jegliche ivtv module aus der modules.autoload entfernt. Das laden der Module geschieht "automatisch" vom Kernel (ist ja in der ivtv Doku so beschrieben das daß im Kernel aktiviert sein muss).
Vom Fehlerfall kann ich leider keinen Log liefern, die Kiste scheint so heftig abzustürzen das syslog-ng es anscheinend nicht mal mehr schafft seinen Logfilebuffer auf die HD zu flushen. Erst der nächste erfolgreiche Boot (also wenn ich die Karte wieder entfernt habe) taucht wieder im Logfile auf. Daher hier mal das Logfile von einem der wenigen erfolgreichen Bootvorgänge mit eingestecker PVR-350 und ivtv.
Oct 28 17:13:22 gentoo-VDR syslog-ng[5544]: syslog-ng version 1.6.11 starting
Oct 28 17:13:22 gentoo-VDR syslog-ng[5544]: Changing permissions on special file /dev/tty12
Oct 28 17:13:22 gentoo-VDR 00000 - 00000000000a0000 (usable)
Oct 28 17:13:22 gentoo-VDR BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 28 17:13:22 gentoo-VDR BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
Oct 28 17:13:22 gentoo-VDR BIOS-e820: 000000001dff0000 - 000000001dff3000 (ACPI NVS)
Oct 28 17:13:22 gentoo-VDR BIOS-e820: 000000001dff3000 - 000000001e000000 (ACPI data)
Oct 28 17:13:22 gentoo-VDR BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Oct 28 17:13:22 gentoo-VDR BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 28 17:13:22 gentoo-VDR BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Oct 28 17:13:22 gentoo-VDR 479MB LOWMEM available.
Oct 28 17:13:22 gentoo-VDR On node 0 totalpages: 122864
Oct 28 17:13:22 gentoo-VDR DMA zone: 4096 pages, LIFO batch:0
Oct 28 17:13:22 gentoo-VDR Normal zone: 118768 pages, LIFO batch:31
Oct 28 17:13:22 gentoo-VDR DMI 2.3 present.
Oct 28 17:13:22 gentoo-VDR ACPI: RSDP (v000 CLE266 ) @ 0x000f7050
Oct 28 17:13:22 gentoo-VDR ACPI: RSDT (v001 CLE266 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1dff3000
Oct 28 17:13:22 gentoo-VDR ACPI: FADT (v001 CLE266 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1dff3040
Oct 28 17:13:22 gentoo-VDR ACPI: DSDT (v001 CLE266 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Oct 28 17:13:22 gentoo-VDR ACPI: PM-Timer IO Port: 0x4008
Oct 28 17:13:22 gentoo-VDR Allocating PCI resources starting at 20000000 (gap: 1e000000:e0c00000)
Oct 28 17:13:22 gentoo-VDR Built 1 zonelists
Oct 28 17:13:22 gentoo-VDR Kernel command line: root=/dev/hda1 vga=0x317
Oct 28 17:13:22 gentoo-VDR Found and enabled local APIC!
Oct 28 17:13:22 gentoo-VDR mapped APIC to ffffd000 (fee00000)
Oct 28 17:13:22 gentoo-VDR Enabling fast FPU save and restore... done.
Oct 28 17:13:22 gentoo-VDR Enabling unmasked SIMD FPU exception support... done.
Oct 28 17:13:22 gentoo-VDR Initializing CPU#0
Oct 28 17:13:22 gentoo-VDR PID hash table entries: 2048 (order: 11, 8192 bytes)
Oct 28 17:13:22 gentoo-VDR Detected 845.879 MHz processor.
Oct 28 17:13:22 gentoo-VDR Using pmtmr for high-res timesource
Oct 28 17:13:22 gentoo-VDR Console: colour dummy device 80x25
Oct 28 17:13:22 gentoo-VDR Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 28 17:13:22 gentoo-VDR Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 28 17:13:22 gentoo-VDR Memory: 483540k/491456k available (1945k kernel code, 7368k reserved, 797k data, 152k init, 0k highmem)
Oct 28 17:13:22 gentoo-VDR Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 28 17:13:22 gentoo-VDR Calibrating delay using timer specific routine.. 1693.28 BogoMIPS (lpj=8466428)
Oct 28 17:13:22 gentoo-VDR Mount-cache hash table entries: 512
Oct 28 17:13:22 gentoo-VDR CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
Oct 28 17:13:22 gentoo-VDR CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
Oct 28 17:13:22 gentoo-VDR CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 28 17:13:22 gentoo-VDR CPU: L2 cache: 128K
Oct 28 17:13:22 gentoo-VDR CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Oct 28 17:13:22 gentoo-VDR Intel machine check architecture supported.
Oct 28 17:13:22 gentoo-VDR Intel machine check reporting enabled on CPU#0.
Oct 28 17:13:22 gentoo-VDR CPU: Intel Celeron (Coppermine) stepping 0a
Oct 28 17:13:22 gentoo-VDR Checking 'hlt' instruction... OK.
Oct 28 17:13:22 gentoo-VDR SMP alternatives: switching to UP code
Oct 28 17:13:22 gentoo-VDR Freeing SMP alternatives: 0k freed
Oct 28 17:13:22 gentoo-VDR ACPI: setting ELCR to 0200 (from 1e20)
Oct 28 17:13:22 gentoo-VDR NET: Registered protocol family 16
Oct 28 17:13:22 gentoo-VDR ACPI: bus type pci registered
Oct 28 17:13:22 gentoo-VDR PCI: PCI BIOS revision 2.10 entry at 0xfad30, last bus=1
Oct 28 17:13:22 gentoo-VDR Setting up standard PCI resources
Oct 28 17:13:22 gentoo-VDR ACPI: Subsystem revision 20060127
Oct 28 17:13:22 gentoo-VDR ACPI: Interpreter enabled
Oct 28 17:13:22 gentoo-VDR ACPI: Using PIC for interrupt routing
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 28 17:13:22 gentoo-VDR PCI: Probing PCI hardware (bus 00)
Oct 28 17:13:22 gentoo-VDR ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Oct 28 17:13:22 gentoo-VDR PCI quirk: region 4000-407f claimed by vt8235 PM
Oct 28 17:13:22 gentoo-VDR PCI quirk: region 5000-500f claimed by vt8235 SMB
Oct 28 17:13:22 gentoo-VDR Boot video device is 0000:01:00.0
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Oct 28 17:13:22 gentoo-VDR Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 28 17:13:22 gentoo-VDR pnp: PnP ACPI init
Oct 28 17:13:22 gentoo-VDR pnp: PnP ACPI: found 10 devices
Oct 28 17:13:22 gentoo-VDR SCSI subsystem initialized
Oct 28 17:13:22 gentoo-VDR usbcore: registered new driver usbfs
Oct 28 17:13:22 gentoo-VDR usbcore: registered new driver hub
Oct 28 17:13:22 gentoo-VDR PCI: Using ACPI for IRQ routing
Oct 28 17:13:22 gentoo-VDR PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 28 17:13:22 gentoo-VDR pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
Oct 28 17:13:22 gentoo-VDR pnp: 00:02: ioport range 0x5000-0x500f has been reserved
Oct 28 17:13:22 gentoo-VDR PCI: Bridge: 0000:00:01.0
Oct 28 17:13:22 gentoo-VDR IO window: disabled.
Oct 28 17:13:22 gentoo-VDR MEM window: ec000000-edffffff
Oct 28 17:13:22 gentoo-VDR PREFETCH window: e4000000-e7ffffff
Oct 28 17:13:22 gentoo-VDR PCI: Setting latency timer of device 0000:00:01.0 to 64
Oct 28 17:13:22 gentoo-VDR NET: Registered protocol family 2
Oct 28 17:13:22 gentoo-VDR IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Oct 28 17:13:22 gentoo-VDR TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Oct 28 17:13:22 gentoo-VDR TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Oct 28 17:13:22 gentoo-VDR TCP: Hash tables configured (established 16384 bind 8192)
Oct 28 17:13:22 gentoo-VDR TCP reno registered
Oct 28 17:13:22 gentoo-VDR Machine check exception polling timer started.
Oct 28 17:13:22 gentoo-VDR Total HugeTLB memory allocated, 0
Oct 28 17:13:22 gentoo-VDR io scheduler noop registered
Oct 28 17:13:22 gentoo-VDR io scheduler cfq registered (default)
Oct 28 17:13:22 gentoo-VDR Real Time Clock Driver v1.12ac
Oct 28 17:13:22 gentoo-VDR Non-volatile memory driver v1.2
Oct 28 17:13:22 gentoo-VDR Linux agpgart interface v0.101 (c) Dave Jones
Oct 28 17:13:22 gentoo-VDR agpgart: Detected VIA CLE266 chipset
Oct 28 17:13:22 gentoo-VDR agpgart: AGP aperture is 64M @ 0xe0000000
Oct 28 17:13:22 gentoo-VDR [drm] Initialized drm 1.0.1 20051102
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
Oct 28 17:13:22 gentoo-VDR PCI: setting IRQ 10 as level-triggered
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Oct 28 17:13:22 gentoo-VDR [drm] Initialized via 2.7.4 20051116 on minor 0
Oct 28 17:13:22 gentoo-VDR vesafb: framebuffer at 0xe4000000, mapped to 0xde880000, using 3072k, total 32768k
Oct 28 17:13:22 gentoo-VDR vesafb: mode is 1024x768x16, linelength=2048, pages=20
Oct 28 17:13:22 gentoo-VDR vesafb: protected mode interface info at c000:3586
Oct 28 17:13:22 gentoo-VDR vesafb: scrolling: redraw
Oct 28 17:13:22 gentoo-VDR vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Oct 28 17:13:22 gentoo-VDR Console: switching to colour frame buffer device 128x48
Oct 28 17:13:22 gentoo-VDR fb0: VESA VGA frame buffer device
Oct 28 17:13:22 gentoo-VDR vga16fb: initializing
Oct 28 17:13:22 gentoo-VDR vga16fb: mapped to 0xc00a0000
Oct 28 17:13:22 gentoo-VDR fb1: VGA16 VGA frame buffer device
Oct 28 17:13:22 gentoo-VDR mice: PS/2 mouse device common for all mice
Oct 28 17:13:22 gentoo-VDR loop: loaded (max 8 devices)
Oct 28 17:13:22 gentoo-VDR Linux video capture interface: v1.00
Oct 28 17:13:22 gentoo-VDR Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 28 17:13:22 gentoo-VDR ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 28 17:13:22 gentoo-VDR VP_IDE: IDE controller at PCI slot 0000:00:11.1
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Oct 28 17:13:22 gentoo-VDR PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 10
Oct 28 17:13:22 gentoo-VDR VP_IDE: chipset revision 6
Oct 28 17:13:22 gentoo-VDR VP_IDE: not 100% native mode: will probe irqs later
Oct 28 17:13:22 gentoo-VDR VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
Oct 28 17:13:22 gentoo-VDR ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:pio
Oct 28 17:13:22 gentoo-VDR ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:pio
Oct 28 17:13:22 gentoo-VDR Probing IDE interface ide0...
Oct 28 17:13:22 gentoo-VDR hda: WDC WD2000JB-00GVA0, ATA DISK drive
Oct 28 17:13:22 gentoo-VDR ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 28 17:13:22 gentoo-VDR Probing IDE interface ide1...
Oct 28 17:13:22 gentoo-VDR hdc: PIONEER DVD RW DVR-106D, ATAPI CD/DVD-ROM drive
Oct 28 17:13:22 gentoo-VDR ide1 at 0x170-0x177,0x376 on irq 15
Oct 28 17:13:22 gentoo-VDR hda: max request size: 512KiB
Oct 28 17:13:22 gentoo-VDR hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
Oct 28 17:13:22 gentoo-VDR hda: cache flushes supported
Oct 28 17:13:22 gentoo-VDR hda: hda1 hda2 hda3
Oct 28 17:13:22 gentoo-VDR hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Oct 28 17:13:22 gentoo-VDR Uniform CD-ROM driver Revision: 3.20
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Oct 28 17:13:22 gentoo-VDR PCI: setting IRQ 11 as level-triggered
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Oct 28 17:13:22 gentoo-VDR ehci_hcd 0000:00:10.3: EHCI Host Controller
Oct 28 17:13:22 gentoo-VDR ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
Oct 28 17:13:22 gentoo-VDR ehci_hcd 0000:00:10.3: irq 11, io mem 0xee003000
Oct 28 17:13:22 gentoo-VDR ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 28 17:13:22 gentoo-VDR usb usb1: configuration #1 chosen from 1 choice
Oct 28 17:13:22 gentoo-VDR hub 1-0:1.0: USB hub found
Oct 28 17:13:22 gentoo-VDR hub 1-0:1.0: 6 ports detected
Oct 28 17:13:22 gentoo-VDR ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Oct 28 17:13:22 gentoo-VDR USB Universal Host Controller Interface driver v3.0
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Oct 28 17:13:22 gentoo-VDR uhci_hcd 0000:00:10.0: UHCI Host Controller
Oct 28 17:13:22 gentoo-VDR uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Oct 28 17:13:22 gentoo-VDR uhci_hcd 0000:00:10.0: irq 10, io base 0x0000d800
Oct 28 17:13:22 gentoo-VDR usb usb2: configuration #1 chosen from 1 choice
Oct 28 17:13:22 gentoo-VDR hub 2-0:1.0: USB hub found
Oct 28 17:13:22 gentoo-VDR hub 2-0:1.0: 2 ports detected
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
Oct 28 17:13:22 gentoo-VDR PCI: setting IRQ 5 as level-triggered
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Oct 28 17:13:22 gentoo-VDR uhci_hcd 0000:00:10.1: UHCI Host Controller
Oct 28 17:13:22 gentoo-VDR uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Oct 28 17:13:22 gentoo-VDR uhci_hcd 0000:00:10.1: irq 5, io base 0x0000dc00
Oct 28 17:13:22 gentoo-VDR usb usb3: configuration #1 chosen from 1 choice
Oct 28 17:13:22 gentoo-VDR hub 3-0:1.0: USB hub found
Oct 28 17:13:22 gentoo-VDR hub 3-0:1.0: 2 ports detected
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
Oct 28 17:13:22 gentoo-VDR PCI: setting IRQ 12 as level-triggered
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
Oct 28 17:13:22 gentoo-VDR uhci_hcd 0000:00:10.2: UHCI Host Controller
Oct 28 17:13:22 gentoo-VDR uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Oct 28 17:13:22 gentoo-VDR uhci_hcd 0000:00:10.2: irq 12, io base 0x0000e000
Oct 28 17:13:22 gentoo-VDR usb usb4: configuration #1 chosen from 1 choice
Oct 28 17:13:22 gentoo-VDR hub 4-0:1.0: USB hub found
Oct 28 17:13:22 gentoo-VDR hub 4-0:1.0: 2 ports detected
Oct 28 17:13:22 gentoo-VDR Initializing USB Mass Storage driver...
Oct 28 17:13:22 gentoo-VDR usb 1-4: new high speed USB device using ehci_hcd and address 4
Oct 28 17:13:22 gentoo-VDR usb 1-4: configuration #1 chosen from 1 choice
Oct 28 17:13:22 gentoo-VDR usb 2-2: new full speed USB device using uhci_hcd and address 2
Oct 28 17:13:22 gentoo-VDR usb 2-2: configuration #1 chosen from 1 choice
Oct 28 17:13:22 gentoo-VDR usb 3-1: new low speed USB device using uhci_hcd and address 2
Oct 28 17:13:22 gentoo-VDR usb 3-1: configuration #1 chosen from 1 choice
Oct 28 17:13:22 gentoo-VDR scsi0 : SCSI emulation for USB Mass Storage devices
Oct 28 17:13:22 gentoo-VDR usb-storage: device found at 4
Oct 28 17:13:22 gentoo-VDR usb-storage: waiting for device to settle before scanning
Oct 28 17:13:22 gentoo-VDR scsi1 : SCSI emulation for USB Mass Storage devices
Oct 28 17:13:22 gentoo-VDR usbcore: registered new driver usb-storage
Oct 28 17:13:22 gentoo-VDR USB Mass Storage support registered.
Oct 28 17:13:22 gentoo-VDR usb-storage: device found at 2
Oct 28 17:13:22 gentoo-VDR usb-storage: waiting for device to settle before scanning
Oct 28 17:13:22 gentoo-VDR input: Logitech Logitech USB Keyboard as /class/input/input0
Oct 28 17:13:22 gentoo-VDR input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:10.1-1
Oct 28 17:13:22 gentoo-VDR input: Logitech Logitech USB Keyboard as /class/input/input1
Oct 28 17:13:22 gentoo-VDR input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:10.1-1
Oct 28 17:13:22 gentoo-VDR usbcore: registered new driver usbhid
Oct 28 17:13:22 gentoo-VDR drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Oct 28 17:13:22 gentoo-VDR PNP: No PS/2 controller found. Probing ports directly.
Oct 28 17:13:22 gentoo-VDR serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 28 17:13:22 gentoo-VDR serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 28 17:13:22 gentoo-VDR Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC).
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
Oct 28 17:13:22 gentoo-VDR PCI: Setting latency timer of device 0000:00:11.5 to 64
Oct 28 17:13:22 gentoo-VDR ALSA device list:
Oct 28 17:13:22 gentoo-VDR #0: VIA 8235 with CMI9761 at 0xe800, irq 12
Oct 28 17:13:22 gentoo-VDR ip_conntrack version 2.4 (3839 buckets, 30712 max) - 172 bytes per conntrack
Oct 28 17:13:22 gentoo-VDR ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 28 17:13:22 gentoo-VDR TCP bic registered
Oct 28 17:13:22 gentoo-VDR NET: Registered protocol family 1
Oct 28 17:13:22 gentoo-VDR NET: Registered protocol family 17
Oct 28 17:13:22 gentoo-VDR Using IPI Shortcut mode
Oct 28 17:13:22 gentoo-VDR VFS: Mounted root (ext2 filesystem) readonly.
Oct 28 17:13:22 gentoo-VDR Freeing unused kernel memory: 152k freed
Oct 28 17:13:22 gentoo-VDR Vendor: VBTM Model: Store 'n' Go Rev: 1.02
Oct 28 17:13:22 gentoo-VDR Type: Direct-Access ANSI SCSI revision: 00
Oct 28 17:13:22 gentoo-VDR SCSI device sda: 2013184 512-byte hdwr sectors (1031 MB)
Oct 28 17:13:22 gentoo-VDR sda: Write Protect is off
Oct 28 17:13:22 gentoo-VDR sda: Mode Sense: 23 00 00 00
Oct 28 17:13:22 gentoo-VDR sda: assuming drive cache: write through
Oct 28 17:13:22 gentoo-VDR SCSI device sda: 2013184 512-byte hdwr sectors (1031 MB)
Oct 28 17:13:22 gentoo-VDR sda: Write Protect is off
Oct 28 17:13:22 gentoo-VDR sda: Mode Sense: 23 00 00 00
Oct 28 17:13:22 gentoo-VDR sda: assuming drive cache: write through
Oct 28 17:13:22 gentoo-VDR sda: sda1
Oct 28 17:13:22 gentoo-VDR sd 0:0:0:0: Attached scsi removable disk sda
Oct 28 17:13:22 gentoo-VDR sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 28 17:13:22 gentoo-VDR Vendor: Medion Model: Flash XL CF Rev: 3.1A
Oct 28 17:13:22 gentoo-VDR Type: Direct-Access ANSI SCSI revision: 00
Oct 28 17:13:22 gentoo-VDR usb-storage: device scan complete
Oct 28 17:13:22 gentoo-VDR sd 1:0:0:0: Attached scsi removable disk sdb
Oct 28 17:13:22 gentoo-VDR sd 1:0:0:0: Attached scsi generic sg1 type 0
Oct 28 17:13:22 gentoo-VDR Vendor: Medion Model: Flash XL MS Rev: 3.1A
Oct 28 17:13:22 gentoo-VDR Type: Direct-Access ANSI SCSI revision: 00
Oct 28 17:13:22 gentoo-VDR sd 1:0:0:1: Attached scsi removable disk sdc
Oct 28 17:13:22 gentoo-VDR sd 1:0:0:1: Attached scsi generic sg2 type 0
Oct 28 17:13:22 gentoo-VDR Vendor: Medion Model: Flash XL MMC/SD Rev: 3.1A
Oct 28 17:13:22 gentoo-VDR Type: Direct-Access ANSI SCSI revision: 00
Oct 28 17:13:22 gentoo-VDR sd 1:0:0:2: Attached scsi removable disk sdd
Oct 28 17:13:22 gentoo-VDR sd 1:0:0:2: Attached scsi generic sg3 type 0
Oct 28 17:13:22 gentoo-VDR Vendor: Medion Model: Flash XL SM Rev: 3.1A
Oct 28 17:13:22 gentoo-VDR Type: Direct-Access ANSI SCSI revision: 00
Oct 28 17:13:22 gentoo-VDR sd 1:0:0:3: Attached scsi removable disk sde
Oct 28 17:13:22 gentoo-VDR sd 1:0:0:3: Attached scsi generic sg4 type 0
Oct 28 17:13:22 gentoo-VDR usb-storage: device scan complete
Oct 28 17:13:22 gentoo-VDR 8139too Fast Ethernet driver 0.9.27
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Oct 28 17:13:22 gentoo-VDR eth0: RealTek RTL8139 at 0xde81e000, 00:0e:2e:97:4b:7e, IRQ 11
Oct 28 17:13:22 gentoo-VDR eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Oct 28 17:13:22 gentoo-VDR ivtv: ==================== START INIT IVTV ====================
Oct 28 17:13:22 gentoo-VDR ivtv: version 0.7.1 (tagged release) loading
Oct 28 17:13:22 gentoo-VDR ivtv: Linux version: 2.6.17-gentoo mod_unload PENTIUMIII REGPARM gcc-4.1
Oct 28 17:13:22 gentoo-VDR ivtv: In case of problems please include the debug info between
Oct 28 17:13:22 gentoo-VDR ivtv: the START INIT IVTV and END INIT IVTV lines, along with
Oct 28 17:13:22 gentoo-VDR ivtv: any module options, when mailing the ivtv-users mailinglist.
Oct 28 17:13:22 gentoo-VDR ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
Oct 28 17:13:22 gentoo-VDR ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Oct 28 17:13:22 gentoo-VDR tveeprom 1-0050: Hauppauge model 48134, rev I121, serial# 6174506
Oct 28 17:13:22 gentoo-VDR tveeprom 1-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 28 17:13:22 gentoo-VDR tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 28 17:13:22 gentoo-VDR tveeprom 1-0050: audio processor is MSP4418 (idx 25)
Oct 28 17:13:22 gentoo-VDR tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
Oct 28 17:13:22 gentoo-VDR tveeprom 1-0050: has radio, has IR remote
Oct 28 17:13:22 gentoo-VDR tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 28 17:13:22 gentoo-VDR saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
Oct 28 17:13:22 gentoo-VDR saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 28 17:13:22 gentoo-VDR msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 28 17:13:22 gentoo-VDR msp3400 1-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect and autoselect
Oct 28 17:13:22 gentoo-VDR saa7146: register extension 'dvb'.
Oct 28 17:13:22 gentoo-VDR ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
Oct 28 17:13:22 gentoo-VDR ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 28 17:13:22 gentoo-VDR ivtv0: Encoder revision: 0x02050032
Oct 28 17:13:22 gentoo-VDR ivtv0: Decoder revision: 0x02020023
Oct 28 17:13:22 gentoo-VDR ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Oct 28 17:13:22 gentoo-VDR ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
Oct 28 17:13:22 gentoo-VDR ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
Oct 28 17:13:22 gentoo-VDR ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Oct 28 17:13:22 gentoo-VDR ivtv0: Create encoder radio stream
Oct 28 17:13:22 gentoo-VDR ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
Oct 28 17:13:22 gentoo-VDR ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
Oct 28 17:13:22 gentoo-VDR ivtv0: Create decoder VOUT stream
Oct 28 17:13:22 gentoo-VDR ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
Oct 28 17:13:22 gentoo-VDR ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 28 17:13:22 gentoo-VDR tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 28 17:13:22 gentoo-VDR ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
Oct 28 17:13:22 gentoo-VDR ivtv: ==================== END INIT IVTV ====================
Oct 28 17:13:22 gentoo-VDR ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Oct 28 17:13:22 gentoo-VDR saa7146: found saa7146 @ mem de87e000 (revision 1, irq 5) (0x13c2,0x000a).
Oct 28 17:13:22 gentoo-VDR DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X).
Oct 28 17:13:22 gentoo-VDR adapter has MAC addr = 00:d0:5c:04:b0:c9
Oct 28 17:13:22 gentoo-VDR dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f22623
Oct 28 17:13:22 gentoo-VDR dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 28 17:13:22 gentoo-VDR dvb-ttpci: MSP3415 audio DAC @ card 0
Oct 28 17:13:22 gentoo-VDR saa7146_vv: saa7146 (0): registered device video1 [v4l2]
Oct 28 17:13:22 gentoo-VDR saa7146_vv: saa7146 (0): registered device vbi1 [v4l2]
Oct 28 17:13:22 gentoo-VDR DVB: registering frontend 0 (ST STV0297 DVB-C)...
Oct 28 17:13:22 gentoo-VDR input: DVB on-card IR receiver as /class/input/input2
Oct 28 17:13:22 gentoo-VDR dvb-ttpci: found av7110-0.
Oct 28 17:13:22 gentoo-VDR spurious 8259A interrupt: IRQ7.
Oct 28 17:13:22 gentoo-VDR lirc_dev: IR Remote Control driver registered, at major 61
Oct 28 17:13:22 gentoo-VDR lirc_serial: auto-detected active high receiver
Oct 28 17:13:22 gentoo-VDR lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 28 17:13:22 gentoo-VDR subfs 0.9
Oct 28 17:13:22 gentoo-VDR kjournald starting. Commit interval 5 seconds
Oct 28 17:13:22 gentoo-VDR EXT3 FS on hda3, internal journal
Oct 28 17:13:22 gentoo-VDR EXT3-fs: mounted filesystem with ordered data mode.
Oct 28 17:13:22 gentoo-VDR Adding 1959920k swap on /dev/hda2. Priority:-1 extents:1 across:1959920k
Oct 28 17:13:22 gentoo-VDR lircd-0.8.0[5617]: lircd(serial) ready
Oct 28 17:13:24 gentoo-VDR eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Oct 28 17:13:29 gentoo-VDR sshd[6246]: Server listening on 0.0.0.0 port 22.
Oct 28 17:13:35 gentoo-VDR lircd-0.8.0[5617]: accepted new client on /dev/lircd
Oct 28 17:13:44 gentoo-VDR login(pam_unix)[6583]: session opened for user root by (uid=0)
Oct 28 17:13:44 gentoo-VDR login[6613]: ROOT LOGIN on 'tty1'
Oct 28 17:14:06 gentoo-VDR shutdown[6623]: shutting down for system reboot
Oct 28 17:14:06 gentoo-VDR init: Switching to runlevel: 6
Oct 28 17:14:11 gentoo-VDR lircd-0.8.0[5617]: removed client
Oct 28 17:14:15 gentoo-VDR sshd[6246]: Received signal 15; terminating.
Oct 28 17:14:19 gentoo-VDR lircd-0.8.0[5617]: caught signal
Oct 28 17:14:21 gentoo-VDR syslog-ng[5544]: syslog-ng version 1.6.11 going down