Beiträge von lv256

  • Technotrend TT-T1300 funzt nicht

    Hi Armin, hi Carsten,
    also ... ein kleines Erfolgserlebnis!
    Habs dann auch mit modprobe budget && modprobe budget_ci versucht und habe nun unter kaffeine das DVB Symbol nicht mehr ausgegraut. Nur kann ich jetzt noch keine Sender finden.
    Wohne im Ruhrgebiet und hier in Dortmund ist das Signal ausgezeichnet. Der Signalbalken beim scanen steht auf 100% aber es wird kein Sender gefunden ...
    Gruß, Frank

  • Technotrend TT-T1300 funzt nicht

    Hi Armin, hi Carsten,
    na das ist ja mal ein Ansatz um zu einer Lösung zu kommen. Danke für die Infos!
    Da ich z.Zt. an der xp Kiste poste, und ich nicht am Linux Rechner rankomme, kann ich es jetzt nicht ausprobieren. Werde morgen noch mal ran gehen um das zu prüfen. Ich halte euch, falls es euch interessiert aber gern auf dem laufenden.
    Muss nun mit dem Hund raus ... Bis denne und schönen Abend noch ;)
    Gruß, Frank

  • Technotrend TT-T1300 funzt nicht

    Ja es ist echt frustriernd, als wäre es für einen Linux-Anfänger nicht schon schwer genug überhaupt irgendwie zurecht zu kommen. Und wenn dann die Installation und Konfiguration von nicht exotischer Hardware auch noch Probleme bereitet, kann einem auch schon mal die Lust daran vergehen. Aber ich gebe nicht auf und die Hoffnung stirbt zuletzt!
    Also ich vermute schon fast , dass etwas mit dem Treiber nicht in Ordnung ist, weil unter xp (paralell installiert) bekomme ich alle Sender und die Karte rennt einwandfrei.
    Die Hardware kann logischer weise nicht defekt sein.
    Seltsam finde ich auch, egal welches Kernelmodul ich angebe mit mit lsmod mir angezeigt wird das auch budget_core da mitspielt. Muß das so sein? Fragen über Fragen ...


    mt352 6404 1 saa7134_dvb
    saa7134 109908 1 saa7134_dvb
    v4l2_common 5760 1 saa7134
    v4l1_compat 13060 1 saa7134
    soundcore 9184 2 snd,saa7134
    ir_common 8196 1 saa7134
    videodev 9088 1 saa7134
    video_buf_dvb 6276 1 saa7134_dvb
    dvb_core 77480 3 budget,budget_core,video_buf_dvb
    video_buf 20868 3 saa7134_dvb,saa7134,video_buf_dvb
    tda1004x 14084 1 saa7134_dvb
    firmware_class 9856 3 pcmcia,saa7134_dvb,tda1004x
    i2c_core 20368 15 budget,s5h1420,l64781,ves1820,budget_core,ttpci_eeprom,stv0299,tda8083,ves1x93,i2c_sis96x,i2c_sis630,saa7134_dvb,mt352,saa7134,tda1004x


    Achso, mein Kernel ist: 2.6.13-15.8-default, nannte ich schon im 1. Posting.
    Es kann aber vielleicht auch sein, das mein Kermel zu alt und der Treiber zu frisch ist.
    Ich weiss es halt nicht, weil ich auch keinen kenne der die Karte hat und bei dem sie auch unter Linux funktioniert.
    Gruß, LV

  • Technotrend TT-T1300 funzt nicht

    Danke für den Tipp, mauerspecht,
    hab es gestern Abend nochmal mit allen 3 Kernel-Modulen versucht.
    budget, budget-av, budget-ci
    Doch leider ohne Erfolg, woran kann es vielleicht noch liegen, was kann ich tun?
    Gruß, lv

  • Technotrend TT-T1300 funzt nicht

    Hallo Leute,


    eins vorweg, Klasse Forum hier! Habe mich schon in verschieden Foren umgesehen und zu meinem Problem leider nichts gefunden. Wende mich nun an euch, weil ich als echter Newbie auch echte Probleme mit der Konfiguration der Budget Karte "Technotrend TT-T1300" unter Suse 10.0 habe.
    Würde gern das VDR Projekt anpacken aber zunächst muß ich die Karte irgendwie ans rennen bekommen.
    Die Karte wurde bei der Neuinstalltion von Suse gefunden, brauchte für die Konfiguration lediglich den Pfad der (Firmware)-Datei >> ttlcdacc.dll << angeben.
    Habe dann versucht unter Kaffeine Sender zu scanen, leider ohne Erfolg. Das DVB Symbol ist nach einigen hin und her installieren der Kaffeine Version nun ausgegraut und vorher hatte ich es. Aber beim scanen wurden dann keine Sender gefunden.


    Unter YAST steht nun folgendes:
    Technotrend-Budget / Hauppauge WinTV-NOVA-T DVB card
    Als DVB-Karte Nummer 0 konfiguriert
    Treiber dvb-ttpci, tda1004x
    Firmware: Installiert (dvb-fe-tda10045.fw)
    Firmware: Installiert (dvb-fe-tda10046.fw)


    Wenn ich unter Yast auf => Bearbeiten => Einstellungen für Experten (zähle mich natürlich nicht dazu) gehe, zeigt mir der Eintrag >> Kernelmodul << :
    dvb-ttpci: driver for SAA-7146 based AVM110 PCI DVB cards by Siemens, Technodrend; Haupauge. als default Einstellung. Gehe mal davon aus, das die Einstellung OK ist. Oder muß die geändert werden?


    Ich weiss nicht ob alles richtig konfiguriert ist, daher habe ich hier mal ein paar Infos gelistet:


    Folgende Packete sind installiert:
    kaffeine: 0.7.1-3
    libxine1-dvb (1.1.1-0 pm.2 i586)
    libxine1 (1.1.1-0.pm.2 i586)
    xinetd (2.3.13-50 i586)


    lspci
    00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
    00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
    00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
    00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
    00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
    00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
    00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
    00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
    00:0b.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
    00:0d.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
    00:0f.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
    00:11.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81)
    00:13.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
    00:13.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
    00:13.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
    01:00.0 VGA compatible controller: nVidia Corporation NV15DDR [GeForce2 Ti] (rev a4)


    lsmod:
    lsmod
    Module Size Used by
    bluetooth 45700 0
    ipt_pkttype 1664 1
    ipt_LOG 6912 7
    ipt_limit 2304 7
    hfsplus 75140 0
    subfs 7552 1
    speedstep_lib 4228 0
    freq_table 4612 0
    snd_pcm_oss 59168 0
    snd_mixer_oss 18944 1 snd_pcm_oss
    snd_seq 51984 1
    snd_seq_device 8588 1 snd_seq
    button 7056 0
    battery 10244 0
    ac 5252 0
    af_packet 21384 4
    edd 9824 0
    sg 35744 0
    sd_mod 18576 0
    usb_storage 72640 0
    scsi_mod 131304 3 sg,sd_mod,usb_storage
    pcmcia 37176 0
    ip6t_REJECT 5504 3
    ipt_REJECT 5632 3
    ipt_state 1920 12
    iptable_mangle 2688 0
    iptable_nat 22228 0
    iptable_filter 2816 1
    ip6table_mangle 2304 0
    dvb_ttpci 91168 0
    ip_conntrack 42168 2 ipt_state,iptable_nat
    ehci_hcd 32136 0
    l64781 6916 1 dvb_ttpci
    saa7146_vv 47104 1 dvb_ttpci
    saa7146 17672 2 dvb_ttpci,saa7146_vv
    ves1820 5764 1 dvb_ttpci
    stv0299 10760 1 dvb_ttpci
    tda8083 5892 1 dvb_ttpci
    stv0297 7936 1 dvb_ttpci
    snd_intel8x0 33504 4
    snd_ac97_codec 91004 1 snd_intel8x0
    snd_ac97_bus 2432 1 snd_ac97_codec
    ip_tables 19456 8 ipt_pkttype,ipt_LOG,ipt_limit,ipt_REJECT,ipt_state,iptable_mangle,iptable_nat,iptable_filter
    rt2500 217700 1
    yenta_socket 23820 1
    rsrc_nonstatic 12800 1 yenta_socket
    pcmcia_core 39952 3 pcmcia,yenta_socket,rsrc_nonstatic
    sp8870 7052 1 dvb_ttpci
    ves1x93 6660 1 dvb_ttpci
    snd_pcm 93064 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
    snd_timer 24452 2 snd_seq,snd_pcm
    snd 60420 17 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
    snd_page_alloc 10632 2 snd_intel8x0,snd_pcm
    ttpci_eeprom 2688 1 dvb_ttpci
    uhci_hcd 32016 0
    3c59x 40360 0
    mii 5504 1 3c59x
    ip6table_filter 2688 1
    generic 4484 0 [permanent]
    i2c_sis96x 5380 0
    ip6_tables 18176 3 ip6t_REJECT,ip6table_mangle,ip6table_filter
    ohci_hcd 20228 0
    usbcore 112512 5 usb_storage,ehci_hcd,uhci_hcd,ohci_hcd
    i2c_sis630 7564 0
    sis_agp 8452 1
    agpgart 33096 1 sis_agp
    shpchp 88676 0
    pci_hotplug 26164 1 shpchp
    ipv6 242752 15 ip6t_REJECT
    parport_pc 38980 1
    lp 11460 0
    parport 33864 2 parport_pc,lp
    saa7134_dvb 8196 0
    mt352 6404 1 saa7134_dvb
    saa7134 109908 1 saa7134_dvb
    v4l2_common 5760 2 saa7146_vv,saa7134
    v4l1_compat 13060 2 saa7146_vv,saa7134
    soundcore 9184 2 snd,saa7134
    ir_common 8196 1 saa7134
    videodev 9088 2 saa7146_vv,saa7134
    video_buf_dvb 6276 1 saa7134_dvb
    dvb_core 77480 2 dvb_ttpci,video_buf_dvb
    video_buf 20868 4 saa7146_vv,saa7134_dvb,saa7134,video_buf_dvb
    tda1004x 14084 1 saa7134_dvb
    firmware_class 9856 5 pcmcia,dvb_ttpci,sp8870,saa7134_dvb,tda1004x
    i2c_core 20368 15 dvb_ttpci,l64781,ves1820,stv0299,tda8083,stv0297,sp8870,ves1x93,ttpci_eeprom,i2c_sis96x,i2c_sis630,saa7134_dvb,mt352,saa7134,tda1004x
    vfat 12800 0
    fat 49692 1 vfat
    nls_utf8 2048 2
    ntfs 182288 2
    dm_mod 54972 0
    reiserfs 250480 2
    fan 4996 0
    ide_cd 39684 0
    cdrom 36896 1 ide_cd
    thermal 14472 0
    processor 24512 1 thermal
    sis5513 15752 0 [permanent]
    ide_disk 17152 8
    ide_core 122380 5 usb_storage,generic,ide_cd,sis5513,ide_disk



    dmesg
    lsmod
    Module Size Used by
    bluetooth 45700 0
    ipt_pkttype 1664 1
    ipt_LOG 6912 7
    ipt_limit 2304 7
    hfsplus 75140 0
    subfs 7552 1
    speedstep_lib 4228 0
    freq_table 4612 0
    snd_pcm_oss 59168 0
    snd_mixer_oss 18944 1 snd_pcm_oss
    snd_seq 51984 1
    snd_seq_device 8588 1 snd_seq
    button 7056 0
    battery 10244 0
    ac 5252 0
    af_packet 21384 4
    edd 9824 0
    sg 35744 0
    sd_mod 18576 0
    usb_storage 72640 0
    scsi_mod 131304 3 sg,sd_mod,usb_storage
    pcmcia 37176 0
    ip6t_REJECT 5504 3
    ipt_REJECT 5632 3
    ipt_state 1920 12
    iptable_mangle 2688 0
    iptable_nat 22228 0
    iptable_filter 2816 1
    ip6table_mangle 2304 0
    dvb_ttpci 91168 0
    ip_conntrack 42168 2 ipt_state,iptable_nat
    ehci_hcd 32136 0
    l64781 6916 1 dvb_ttpci
    saa7146_vv 47104 1 dvb_ttpci
    saa7146 17672 2 dvb_ttpci,saa7146_vv
    ves1820 5764 1 dvb_ttpci
    stv0299 10760 1 dvb_ttpci
    tda8083 5892 1 dvb_ttpci
    stv0297 7936 1 dvb_ttpci
    snd_intel8x0 33504 4
    snd_ac97_codec 91004 1 snd_intel8x0
    snd_ac97_bus 2432 1 snd_ac97_codec
    ip_tables 19456 8 ipt_pkttype,ipt_LOG,ipt_limit,ipt_REJECT,ipt_state,iptable_mangle,iptable_nat,iptable_filter
    rt2500 217700 1
    yenta_socket 23820 1
    rsrc_nonstatic 12800 1 yenta_socket
    pcmcia_core 39952 3 pcmcia,yenta_socket,rsrc_nonstatic
    sp8870 7052 1 dvb_ttpci
    ves1x93 6660 1 dvb_ttpci
    snd_pcm 93064 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
    snd_timer 24452 2 snd_seq,snd_pcm
    snd 60420 17 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
    snd_page_alloc 10632 2 snd_intel8x0,snd_pcm
    ttpci_eeprom 2688 1 dvb_ttpci
    uhci_hcd 32016 0
    3c59x 40360 0
    mii 5504 1 3c59x
    ip6table_filter 2688 1
    generic 4484 0 [permanent]
    i2c_sis96x 5380 0
    ip6_tables 18176 3 ip6t_REJECT,ip6table_mangle,ip6table_filter
    ohci_hcd 20228 0
    usbcore 112512 5 usb_storage,ehci_hcd,uhci_hcd,ohci_hcd
    i2c_sis630 7564 0
    sis_agp 8452 1
    agpgart 33096 1 sis_agp
    shpchp 88676 0
    pci_hotplug 26164 1 shpchp
    ipv6 242752 15 ip6t_REJECT
    parport_pc 38980 1
    lp 11460 0
    parport 33864 2 parport_pc,lp
    saa7134_dvb 8196 0
    mt352 6404 1 saa7134_dvb
    saa7134 109908 1 saa7134_dvb
    v4l2_common 5760 2 saa7146_vv,saa7134
    v4l1_compat 13060 2 saa7146_vv,saa7134
    soundcore 9184 2 snd,saa7134
    ir_common 8196 1 saa7134
    videodev 9088 2 saa7146_vv,saa7134
    video_buf_dvb 6276 1 saa7134_dvb
    dvb_core 77480 2 dvb_ttpci,video_buf_dvb
    video_buf 20868 4 saa7146_vv,saa7134_dvb,saa7134,video_buf_dvb
    tda1004x 14084 1 saa7134_dvb
    firmware_class 9856 5 pcmcia,dvb_ttpci,sp8870,saa7134_dvb,tda1004x
    i2c_core 20368 15 dvb_ttpci,l64781,ves1820,stv0299,tda8083,stv0297,sp8870,ves1x93,ttpci_eeprom,i2c_sis96x,i2c_sis630,saa7134_dvb,mt352,saa7134,tda1004x
    vfat 12800 0
    fat 49692 1 vfat
    nls_utf8 2048 2
    ntfs 182288 2
    dm_mod 54972 0
    reiserfs 250480 2
    fan 4996 0
    ide_cd 39684 0
    cdrom 36896 1 ide_cd
    thermal 14472 0
    processor 24512 1 thermal
    sis5513 15752 0 [permanent]
    ide_disk 17152 8
    ide_core 122380 5 usb_storage,generic,ide_cd,sis5513,ide_disk
    efemka:/home/frank.krautwurst #
    efemka:/home/frank.krautwurst #
    efemka:/home/frank.krautwurst #
    efemka:/home/frank.krautwurst #
    efemka:/home/frank.krautwurst #
    efemka:/home/frank.krautwurst #
    efemka:/home/frank.krautwurst #
    efemka:/home/frank.krautwurst #
    efemka:/home/frank.krautwurst #
    efemka:/home/frank.krautwurst #
    efemka:/home/frank.krautwurst #
    efemka:/home/frank.krautwurst # dmesg
    Linux version 2.6.13-15.8-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Feb 7 11:07:24 UTC 2006
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
    BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
    BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
    127MB HIGHMEM available.
    896MB LOWMEM available.
    On node 0 totalpages: 262128
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 225280 pages, LIFO batch:31
    HighMem zone: 32752 pages, LIFO batch:15
    DMI 2.3 present.
    ACPI: RSDP (v000 AMI ) @ 0x000fa290
    ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x3fff0000
    ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x3fff0030
    ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x808
    ACPI: local apic disabled
    Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
    Built 1 zonelists
    Kernel command line: root=/dev/hdc2 vga=0x31a selinux=0 resume=/dev/hdc1 splash=silent
    bootsplash: silent mode.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 65536 bytes)
    Detected 1394.283 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1033424k/1048512k available (2029k kernel code, 14144k reserved, 695k data, 204k init, 131008k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 2789.95 BogoMIPS (lpj=5579900)
    Security Framework v1.0.0 initialized
    SELinux: Disabled at boot.
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
    CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 256K (64 bytes/line)
    CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    mtrr: v2.0 (20020519)
    CPU: AMD Athlon(tm) XP 1600+ stepping 02
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    checking if image is initramfs... it is
    Freeing initrd memory: 1748k freed
    ACPI: Looking for DSDT in initrd... not found!
    not found!
    ACPI: setting ELCR to 0200 (from 0c20)
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
    PCI: Using configuration type 1
    ACPI: Subsystem revision 20050408
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
    Uncovering SIS18 that hid as a SIS503 (compatible=1)
    Enabling SiS 96x SMBus.
    Boot video device is 0000:01:00.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: Power Resource [URP1] (off)
    ACPI: Power Resource [URP2] (off)
    ACPI: Power Resource [FDDP] (off)
    ACPI: Power Resource [LPTP] (off)
    ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 10 devices
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
    PCI: Bridge: 0000:00:01.0
    IO window: disabled.
    MEM window: cde00000-cfefffff
    PREFETCH window: bdc00000-cdcfffff
    PCI: Bus 2, cardbus bridge: 0000:00:11.0
    IO window: 00001000-00001fff
    IO window: 00002000-00002fff
    PREFETCH window: 40000000-41ffffff
    MEM window: 42000000-43ffffff
    PCI: Enabling device 0000:00:11.0 (0000 -> 0003)
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:11.0 to 64
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    audit: initializing netlink socket (disabled)
    audit(1143044232.720:1): initialized
    highmem bounce pool size: 64 pages
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Initializing Cryptographic API
    vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 10240k, total 65536k
    vesafb: mode is 1280x1024x16, linelength=2560, pages=1
    vesafb: protected mode interface info at c000:bdb0
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112645 bytes,<6>...found (1280x1024, 17839 bytes, v3).
    Console: switching to colour frame buffer device 158x59
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
    loop: loaded (max 8 devices)
    mice: PS/2 mouse device common for all mice
    input: PC Speaker
    md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 3.38
    NET: Registered protocol family 2
    input: AT Translated Set 2 keyboard on isa0060/serio0
    IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
    TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Using IPI Shortcut mode
    ACPI wakeup devices:
    PCI0 PS2M PS2K UAR1 UAR2 USB1 USB2 LAN MDM AUD SLPB
    ACPI: (supports S0 S1 S4 S5)
    Freeing unused kernel memory: 204k freed
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    logips2pp: Detected unknown logitech mouse model 85
    SIS5513: IDE controller at PCI slot 0000:00:02.5
    SIS5513: chipset revision 208
    SIS5513: not 100% native mode: will probe irqs later
    SIS5513: SiS735 ATA 100 (2nd gen) controller
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
    Probing IDE interface ide0...
    input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
    hda: SAMSUNG SV4002H, ATA DISK drive
    hdb: SAMSUNG SP0802N, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: max request size: 128KiB
    hda: 78242976 sectors (40060 MB) w/1945KiB Cache, CHS=65535/16/63, UDMA(100)
    hda: cache flushes supported
    hda: hda1
    hdb: max request size: 1024KiB
    hdb: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
    hdb: cache flushes supported
    hdb: hdb1 hdb2
    Probing IDE interface ide1...
    hdc: WDC WD400LB-00DNA0, ATA DISK drive
    hdd: _NEC DVD_RW ND-4550A, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    hdc: max request size: 1024KiB
    hdc: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
    hdc: cache flushes supported
    hdc: hdc1 hdc2
    ACPI: CPU0 (power states: C1[C1])
    hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    Attempting manual resume
    swsusp: Suspend partition has wrong signature?
    ReiserFS: hdc2: found reiserfs format "3.6" with standard journal
    ReiserFS: hdc2: using ordered data mode
    ReiserFS: hdc2: journal params: device hdc2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hdc2: checking transaction log (hdc2)
    ReiserFS: hdc2: Using r5 hash to sort names
    bootsplash: status on console 0 changed to on
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
    ReiserFS: hdb2: found reiserfs format "3.6" with standard journal
    ReiserFS: hdb2: using ordered data mode
    ReiserFS: hdb2: journal params: device hdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hdb2: checking transaction log (hdb2)
    ReiserFS: hdb2: Using r5 hash to sort names
    NTFS driver 2.1.23 [Flags: R/W MODULE].
    NTFS volume version 3.1.
    NTFS volume version 3.1.
    Linux video capture interface: v1.00
    saa7130/34: v4l2 driver version 0.2.14 loaded
    parport: PnPBIOS parport detected.
    parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    Adding 2369576k swap on /dev/hdc1. Priority:-1 extents:1
    lp0: using parport0 (interrupt-driven).
    NET: Registered protocol family 10
    Disabled Privacy Extensions on device c036b920(lo)
    IPv6 over IPv4 tunneling driver
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected SiS 735 chipset
    agpgart: AGP aperture is 64M @ 0xd0000000
    sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not inserted.
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
    ohci_hcd 0000:00:02.2: OHCI Host Controller
    ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:02.2: irq 10, io mem 0xcfffe000
    ip6_tables: (C) 2000-2002 Netfilter core team
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 3 ports detected
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
    ohci_hcd 0000:00:02.3: OHCI Host Controller
    ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:02.3: irq 5, io mem 0xcffff000
    i2c-sis96x version 1.0.0
    sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    usb 1-3: new full speed USB device using ohci_hcd and address 2
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
    0000:00:0d.0: 3Com PCI 3c905C Tornado at 0xd400. Vers LK1.1.19
    USB Universal Host Controller Interface driver v2.3
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:13.0: UHCI Host Controller
    uhci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:13.0: irq 11, io base 0x0000cc00
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:13.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:13.1: UHCI Host Controller
    uhci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:13.1: irq 11, io base 0x0000d000
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    Yenta: CardBus bridge found at 0000:00:11.0 [0000:0000]
    Yenta: ISA IRQ mask 0x0000, PCI irq 11
    Socket status: 30000006
    ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    rt2500 1.1.0 BETA3 2005/07/31 http://rt2x00.serialmonkey.com
    ip_tables: (C) 2000-2002 Netfilter core team
    ACPI-0212: *** Warning: Device is not power manageable
    ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ip_conntrack version 2.1 (8191 buckets, 65528 max) - 248 bytes per conntrack
    intel8x0_measure_ac97_clock: measured 55933 usecs
    intel8x0: clocking to 48000
    ACPI: PCI Interrupt 0000:00:13.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ehci_hcd 0000:00:13.2: EHCI Host Controller
    ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 5
    ehci_hcd 0000:00:13.2: irq 10, io mem 0xcfffbe00
    ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 4 ports detected
    saa7146: register extension 'dvb'.
    SCSI subsystem initialized
    Initializing USB Mass Storage driver...
    scsi0 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7
    cs: IO port probe 0x100-0x3af: excluding 0x290-0x297
    cs: IO port probe 0xc00-0xcff: clean.
    cs: IO port probe 0x820-0x8ff: excluding 0x828-0x837 0x840-0x86f
    cs: IO port probe 0xa00-0xaff: clean.
    bootsplash: status on console 0 changed to on
    Vendor: IC Model: USB Storage-CFC Rev: 301b
    Type: Direct-Access ANSI SCSI revision: 00
    Vendor: IC Model: USB Storage-SMC Rev: 301b
    Type: Direct-Access ANSI SCSI revision: 00
    Vendor: IC Model: USB Storage-MMC Rev: 301b
    Type: Direct-Access ANSI SCSI revision: 00
    Vendor: IC Model: USB Storage-MSC Rev: 301b
    Type: Direct-Access ANSI SCSI revision: 00
    usb-storage: device scan complete
    Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
    Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
    Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
    Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
    Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
    Attached scsi generic sg1 at scsi0, channel 0, id 0, lun 1, type 0
    Attached scsi generic sg2 at scsi0, channel 0, id 0, lun 2, type 0
    Attached scsi generic sg3 at scsi0, channel 0, id 0, lun 3, type 0
    BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
    ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    NET: Registered protocol family 17
    eth0: no IPv6 routers present
    ra0: no IPv6 routers present
    bootsplash: status on console 0 changed to on
    ACPI: Power Button (FF) [PWRF]
    ACPI: Sleep Button (CM) [SLPB]
    IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
    microcode: CPU0 not a capable Intel processor
    microcode: No new microcode data for CPU0
    IA-32 Microcode Update Driver v1.14 unregistered
    powernow-k8: Processor cpuid 662 not supported
    subfs 0.9
    end_request: I/O error, dev fd0, sector 0
    end_request: I/O error, dev fd0, sector 0
    end_request: I/O error, dev fd0, sector 0
    end_request: I/O error, dev fd0, sector 0
    subfs: unsuccessful attempt to mount media (256)
    bootsplash: status on console 0 changed to on
    Bluetooth: Core ver 2.7
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized


    uname -r
    2.6.13-15.8-default


    Könnt ihr damit etwas anfangen?
    Wer kann mir helfen? Wäre für jeden Tipp dankbar!


    HW: K7S5A, AMD XP1600+, 1GB SD-RAM, Geforce2 TI