Beiträge von Techniker

Hi,

ich habe das gleiche Problem, allerdings habe ich mich noch nicht darum kümmern können.

Ich habe meinen VDR vor über einem Jahr aufgesetz, bla bla.

Nun ja wie bei euch war die funktion erst dan, also ein und ausschalten per FB. Nach update usw geht es nicht mehr.

Damals habe ich irgendwo gelesen das durch die updates eine conf/skript verändert wird.

Soll heißen das shutdown skrip des Gehäuse Buttons ist ein anderes als das der FB.

Ergo müssten wir nur mal nachschauen welches der Gehäuse Knopf nutzt und wo der unterschied zum FB skript ist.

Leider kann ich das erst nächste Woche verfogen, aber vileicht hilft es euch ja schon mal weiter.

MFG
Der Techniker

Danke...

was mich auch schon etwas irritiert ist, wenn ich per DVI verbunden bin schneidet er schon beim Booten links, recht, oben und unten den Boottext ab.

In welcher conf müss ich denn da drehen?

HI,

was bedeutet den RTFM?

Das mit der Auflösung kann gut sein.

Kann ich die im OSD ändern, oder nur in der XORG.conf?

Ich verstehe das nicht.

Hänge ich die Kiste an den VGA Ausgang ist alles OK.

Hänge ich sie an den DVI, sehe ich wie se Bootet usw (Leider sind da auch schon die seiten und oben,unten Abgeschnitten)

Sobald ich dann x (KDE) starte, wird das bild Blau. Das KDE ist aber geladen. Es hängt lediglich an der Graphik. Ich kann die Kiste ja sogar im blindflug runterfahren.

Was kann ich nur machen.

Ich habe denThread auch mal umbenant, da es ja nur noch eine Fehlersuche ist.

Danke Leute.

Hallo.

Also ich habe ein ganz anderes Problem.

Wenn ich den VGA Ausgang benutze kann ich die KDE oberfläche bent
utzen.

Der Haken ist wohl der, dass mein System an sich noch die meine alte Grafikkarte erkennt obwohl ich schon eine neue drinn habe.

Neue:
0000:01:00.0 VGA compatible controller: nVidia Corporation NV31 [GeForce FX 5600 XT] (rev a1) (prog-if 00 [VGA])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 9119
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5
Memory at e8000000 (32-bit, non-prefetchable) [size=e9000000]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Expansion ROM at 00020000 [disabled]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0

Alter eintrag in der Xorg.conf steht noch die GeForce TI 200 drinn.

Kann ich das einfach editieren?

Hallo.

Also ich habe ein ganz anderes Problem.

Wenn ich den VGA Ausgang benutze kann ich die KDE oberfläche bent
utzen.

Der Haken ist wohl der, dass mein System an sich noch die meine alte Grafikkarte erkennt obwohl ich schon eine neue drinn habe.

Neue:
0000:01:00.0 VGA compatible controller: nVidia Corporation NV31 [GeForce FX 5600 XT] (rev a1) (prog-if 00 [VGA])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 9119
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5
Memory at e8000000 (32-bit, non-prefetchable) [size=e9000000]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Expansion ROM at 00020000 [disabled]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0

Alter eintrag in der Xorg.conf steht noch die GeForce TI 200 drinn.

Kann ich das einfach editieren?

Ich glaube mein X11 hat ein problem.

Ich habe emerge x11 eingegeben und da kam folgendes heraus.

vdr01 ~ # emerge x11

!!! Your current profile is deprecated and not supported anymore.
!!! Please upgrade to the following profile if possible:
default-linux/x86/2007.0/desktop

To upgrade do the following steps:
# There are several possible profiles that you can use to replace this one.

# default-linux/x86/2007.0
# default-linux/x86/2007.0/desktop
# default-linux/x86/2007.0/server
# default-linux/x86/no-nptl
# default-linux/x86/no-nptl/2.4

# By default, we use the desktop profile.

# emerge -n '>=sys-apps/portage-2.0.51'
# cd /etc
# rm make.profile
# ln -s ../usr/portage/profiles/default-linux/x86/2007.0/desktop make.profile

# This profile is deprecated and will be removed on or after June 1, 2007

Calculating dependencies |
!!! All ebuilds that could satisfy "x11" have been masked.
!!! One of the following masked packages is required to complete your request:
- virtual/x11-7.0-r2 (masked by: package.mask)
# Stefan Schweizer <genstef@gentoo.org> (25 Mar 2007)
# Please use modular Xorg now

Was muss ich den da jetzt machen?

Hi lexi

hier habe ich noch die Xorg.conf

könnte das etwas mit meinem Problem zu tun haben?

vdr01 ~ # emerge kde

!!! Your current profile is deprecated and not supported anymore.
!!! Please upgrade to the following profile if possible:
default-linux/x86/2007.0/desktop

To upgrade do the following steps:
# There are several possible profiles that you can use to replace this one.

# default-linux/x86/2007.0
# default-linux/x86/2007.0/desktop
# default-linux/x86/2007.0/server
# default-linux/x86/no-nptl
# default-linux/x86/no-nptl/2.4

# By default, we use the desktop profile.

# emerge -n '>=sys-apps/portage-2.0.51'
# cd /etc
# rm make.profile
# ln -s ../usr/portage/profiles/default-linux/x86/2007.0/desktop make.profile

# This profile is deprecated and will be removed on or after June 1, 2007

Calculating dependencies... done!

!!! Error: the <dev-java/java-config-1.3 package conflicts with another package;
!!! the two packages cannot be installed on the same system together.
!!! Please use 'emerge --pretend' to determine blockers.

For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):

http://www.gentoo.org/doc/en/h…ok-x86.xml?full=1#blocked

Das Graue Bild wird auch nach zeit x schwarz. Also muss ich da auch einen Bilschirmschoner am laufen haben. Das sieht doch ganz gut aus.

Aber ich kann nicht erkennen wo es hängt!

So

Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: Linux 2.6.8 i686 [ELF]
Current Operating System: Linux vdr01 2.6.16-gentoo #2 PREEMPT Tue Mar 21 20:01:15 CET 2006 i686
Build Date: 03 September 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu May 17 10:47:31 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Speedo/,/usr/share/fonts/Type1/,/usr/share/fonts/CID/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80020804, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 8086,1a30 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 12 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 12 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 1462,3990 rev 12 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 1462,3990 rev 12 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2443 card 1462,3990 rev 12 class 0c,05,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 1462,3990 rev 12 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0314 card 1462,9119 rev a1 class 03,00,00 hdr 00
(II) PCI: 02:01:0: chip 1131,7146 card 13c2,0000 rev 01 class 04,80,00 hdr 00
(II) PCI: 02:02:0: chip 1106,3038 card 1106,3038 rev 61 class 0c,03,00 hdr 80
(II) PCI: 02:02:1: chip 1106,3038 card 1106,3038 rev 61 class 0c,03,00 hdr 80
(II) PCI: 02:02:2: chip 1106,3104 card 1106,3104 rev 63 class 0c,03,20 hdr 80
(II) PCI: 02:06:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:07:0: chip 13f6,0111 card 1462,3990 rev 10 class 04,01,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xea000000 - 0xebffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x40000000 - 0x400fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation GeForce FX 5600SE rev 161, Mem @ 0xe8000000/24, 0xd0000000/28
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[B]
[1] -1 0 0xeb000000 - 0xeb0000ff (0x100) MX[B]
[2] -1 0 0xeb002000 - 0xeb0021ff (0x200) MX[B]
[3] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[6] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[7] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[8] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[9] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[10] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[11] -1 0 0x00005000 - 0x0000500f (0x10) IX[B]
[12] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[13] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[B]
[1] -1 0 0xeb000000 - 0xeb0000ff (0x100) MX[B]
[2] -1 0 0xeb002000 - 0xeb0021ff (0x200) MX[B]
[3] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[6] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[7] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[8] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[9] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[10] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[11] -1 0 0x00005000 - 0x0000500f (0x10) IX[B]
[12] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[13] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[B]
[6] -1 0 0xeb000000 - 0xeb0000ff (0x100) MX[B]
[7] -1 0 0xeb002000 - 0xeb0021ff (0x200) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[10] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[14] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[15] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[16] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[17] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[18] -1 0 0x00005000 - 0x0000500f (0x10) IX[B]
[19] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.1
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.7.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
GeForce FX Go5200, GeForce FX Go5250, GeForce FX Go5200 32M/64M,
0x0329, Quadro NVS 280 PCI, Quadro FX 500, GeForce FX Go5300,
GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
GeForce FX 5900XT, GeForce FX 5950 Ultra, 0x0334, Quadro FX 3000,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, 0x0345, GeForce FX Go5700, GeForce FX Go5700,
0x0349, 0x034B, Quadro FX Go1000, Quadro FX 1100, 0x034F
(II) Primary Device is: PCI 01:00:0
(--) Chipset GeForce FX 5600SE found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[B]
[6] -1 0 0xeb000000 - 0xeb0000ff (0x100) MX[B]
[7] -1 0 0xeb002000 - 0xeb0021ff (0x200) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[10] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[14] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[15] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[16] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[17] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[18] -1 0 0x00005000 - 0x0000500f (0x10) IX[B]
[19] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[B]
[6] -1 0 0xeb000000 - 0xeb0000ff (0x100) MX[B]
[7] -1 0 0xeb002000 - 0xeb0021ff (0x200) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[10] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[17] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[18] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[19] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[20] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[21] -1 0 0x00005000 - 0x0000500f (0x10) IX[B]
[22] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce FX 5600SE"
(==) NV(0): Depth 16, (==) framebuffer bpp 16
(==) NV(0): RGB weight 565
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xD0000000
(--) NV(0): MMIO registers at 0xE8000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0): ...can't find one
(II) NV(0): Probing for analog device on output B...
(--) NV(0): ...can't find one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: SNY Model: 8400 Serial#: 16843009
(II) NV(0): Year: 2005 Week: 50
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max H-Image Size [cm]: horiz.: 70 vert.: 40
(II) NV(0): Gamma: 2.20
(II) NV(0): No DPMS capabilities specified; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) NV(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 148.5 MHz Image Size: 735 x 420 mm
(II) NV(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
(II) NV(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 27.0 MHz Image Size: 735 x 420 mm
(II) NV(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
(II) NV(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
(II) NV(0): Monitor name: SONY TV
(II) NV(0): Ranges: V min: 48 V max: 62 Hz, H min: 14 H max: 70 kHz, PixClock max 150 MHz
(--) NV(0): CRTC 0 is currently programmed for DFP
(II) NV(0): Using DFP on CRTC 0
(--) NV(0): Panel size is 720 x 480
(--) NV(0): VideoRAM: 131072 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): Monitor0: Using default hsync range of 14.00-70.00 kHz
(II) NV(0): Monitor0: Using default vrefresh range of 48.00-62.00 Hz
(II) NV(0): Clock range: 12.00 to 400.00 MHz
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "832x624" (vrefresh out of range)
(II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) NV(0): Virtual size is 1400x1050 (pitch 1408)
(**) NV(0): *Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) NV(0): Modeline "1400x1050" 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
(**) NV(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) NV(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) NV(0): *Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) NV(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) NV(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) NV(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) NV(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) NV(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(--) NV(0): Display dimensions: (700, 400) mm
(--) NV(0): DPI set to (50, 66)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
[1] 0 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[B]
[8] -1 0 0xeb000000 - 0xeb0000ff (0x100) MX[B]
[9] -1 0 0xeb002000 - 0xeb0021ff (0x200) MX[B]
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[12] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[19] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[20] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[21] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[22] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[23] -1 0 0x00005000 - 0x0000500f (0x10) IX[B]
[24] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[25] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xd0000000,0x8000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms"
(**) NV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/mouse"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse0: Buttons: 3
(**) Mouse0: SmartScroll: 1
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/CID/, removing from list!
SetClientVersion: 0 8
AUDIT: Thu May 17 10:55:52 2007: 7944 X: client 15 rejected from local host

Der XORG.log sieht so aus! Ich hoffe das ist nicht zu lang.

moment das war nix.

Morgen,

äh ich bräuchte etwas hilfe!

Ich wollte wie schon beschrieben meinen VDR direkt über den DVI Ausgang konfigurieren.

Naja, jetzt habe ich da zwar ein Bild, aber das ist ca. 800x600 und einfach nur Grau.

Sieht aus wie der Anfang von der KDE Oberfläche. Ist wohl irgendwo hängen geblieben.

Welche Logs sind denn jetzt interessant?

Ich poste mal als erstes was so läuft und was nicht.

Könnte mir jemand beim troubleshooten helfen?

vdr01 ~ # ps -A
PID TTY TIME CMD
1 ? 00:00:00 init
2 ? 00:00:00 ksoftirqd/0
3 ? 00:00:00 events/0
4 ? 00:00:00 khelper
5 ? 00:00:00 kthread
7 ? 00:00:00 kblockd/0
8 ? 00:00:00 kacpid
90 ? 00:00:00 khubd
150 ? 00:00:00 pdflush
151 ? 00:00:00 pdflush
153 ? 00:00:00 aio/0
152 ? 00:00:00 kswapd0
154 ? 00:00:00 cifsoplockd
155 ? 00:00:00 cifsdnotifyd
156 ? 00:00:00 jfsIO
157 ? 00:00:00 jfsCommit
158 ? 00:00:00 jfsSync
159 ? 00:00:00 xfslogd/0
160 ? 00:00:00 xfsdatad/0
746 ? 00:00:00 vesafb
748 ? 00:00:00 kseriod
770 ? 00:00:00 kpsmoused
832 ? 00:00:00 ata/0
888 ? 00:00:00 kjournald
1110 ? 00:00:00 udevd
2963 ? 00:00:00 xfsbufd
2964 ? 00:00:00 xfssyncd
3248 ? 00:00:00 metalog
3249 ? 00:00:00 metalog
3392 ? 00:00:00 lircd
3442 tty8 00:00:00 runvdr
4617 ? 00:00:00 kgameportd
5485 ? 00:00:00 atd
6174 ? 00:00:00 LCDd
6595 ? 00:00:00 acpid
7205 ? 00:00:00 gpm
7242 ? 00:00:00 irexec
7330 ? 00:00:00 dbus-daemon
7342 ? 00:00:00 hald
7347 ? 00:00:00 hald-addon-acpi
7364 ? 00:00:00 hald-addon-stor
7391 ? 00:00:00 ivman
7531 ? 00:00:00 smbd
7533 ? 00:00:00 nmbd
7545 ? 00:00:00 smbd
7617 ? 00:00:00 sshd
7734 ? 00:00:00 cron
7820 ? 00:00:00 xinetd
7886 tty1 00:00:00 agetty
7887 tty2 00:00:00 agetty
7888 tty3 00:00:00 agetty
7889 tty4 00:00:00 agetty
7890 tty5 00:00:00 agetty
7891 tty6 00:00:00 agetty
7941 ? 00:00:00 kdm
7944 ? 00:00:03 X
7945 ? 00:00:00 kdm
7946 ? 00:00:00 vdradmind.pl
8301 ? 00:00:00 startkde
8336 ? 00:00:08 kdeinit
8339 ? 00:00:00 kdeinit
8341 ? 00:00:00 kdeinit
8345 ? 00:00:08 kdeinit
8359 ? 00:00:02 artsd
8361 ? 00:00:00 kdeinit
8367 ? 00:00:00 kwrapper
8369 ? 00:00:00 kdeinit
8370 ? 00:00:00 kdeinit
8373 ? 00:00:00 kdeinit
8374 ? 00:00:01 kdeinit
8376 ? 00:00:01 kdeinit
8377 ? 00:00:00 kdeinit
8379 ? 00:00:00 kdeinit
8381 ? 00:00:08 krandrtray
8382 ? 00:00:00 sshd
8385 pts/1 00:00:00 bash
8904 ? 00:00:00 arm_mon
9174 tty8 00:00:00 vdr
9175 tty8 00:00:00 vdr
9178 ? 00:00:00 kdvb-fe-0
9179 tty8 00:00:00 vdr
9180 tty8 00:00:05 vdr
9182 tty8 00:00:00 vdr
9183 tty8 00:00:00 vdr
9184 tty8 00:00:00 vdr
9185 tty8 00:00:00 vdr
9186 tty8 00:00:00 vdr
9187 tty8 00:00:00 vdr
9188 tty8 00:00:00 vdr
9189 ? 00:00:00 kdeinit
9208 ? 00:00:00 kdeinit
9209 ? 00:00:00 kdeinit
9210 pts/3 00:00:00 su
9212 ? 00:00:00 kdeinit
9213 pts/1 00:00:00 ps
vdr01 ~ # xinit -e vdr-sxfe -f xvdr:tcp://localhost

Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.

Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.

Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

giving up.
xinit: unable to connect to X server
xinit: No such process (errno 3): Server error.

Ich schau mir wohl zuerst mal das Log des Xorg an!

Hilfe! Danke.

Ich habe eine FF Karte full.

danke. das teste ich mal. super.

Hallo
was muss ich den machen damit ich den Gen2vdr anstatt über chich über von mir aus auch VGA sehen kann.

Welche plugins brauche ich oder so?

Das ist doch bestimmt wieder voll einfach nur ich finde den anfang nicht.

Sobalt ich das em84xx oder xliboutput plugin aktiviere loopt mir der VDR.

Geht das nur beim Activy?

Alternativ würde ich gerne wissen welches plugin den jetzt das am besten ist um über den DVI ausgang VDR laufen zu lassen?

OK, iss vileicht doch zuviel auf einmal.

Gibt es ein Plugin für den VDR das es mir ermöglicht im Netz zu surfen?

Der Techniker.

Guten Tag die Herrschaften !

EDIT: Leider habe ich noch ein problem mit dem DVI Augang bekommen. Ich wollte aber kein neues Thread aufmachen, also Editiere ich diese.

Mein Problem ist ziehmlich am ende Beschrieben.

Danke für eure Hilfe.

Bei mir Läuft schon eine ganze weile der Gen2Vdr vor sich hin. Vor ein paar Wochen haben wir einen schicken 40'' LCD bekommen.

Nun ja, jetzt überlege ich schon die ganze Zeit was wohl das sinnvollste für mich wäre. (D.h.: Eure Meinungen oder Ideen würden mich sehr interessiern)

Ich würde ganz gerne auf der Distribution bleibe.

Am besten wäre es wenn ich meinen DVI Ausgang nutzen könnte. Da bekomme ich jetzt noch ein DVI--> HDMI kabel. Danach stellt sich die Frage :

Gehe ich mit einem SoftDives ... auf diesen Ausgang und habe ein High Endbild usw. !

oder

Starte ich Starte ich den KDE automatisch und schaue TV mit dem KVDR?

Wichtig sind zwei Dinge für mich:

1. Super Auflösung
2. Internet Browser

Also, nun meine Fragen:

Ist es möglich den VDR über softdevice(DVI Ausgang) laufen zu lassen und trotzdem und trotzdem einen Browser zu haben
z.b.: Drücke Taste auf der FB und ein Browser öffnet sich. Der dann per Keyboard und Maus bedient werden kann?

oder

Kann ich den VDR FF ausgang deaktivieren (Leistung einsparen). KDE autostart. Gute Auflösung mit welchem player (KVDR)

So.

Ok, ich weiß. Etwas durcheinander.

Ist aber echt schwer in Worte zu fassen!

Wenn es unklar ist was ich meine Fragt mich ruhig.

Hi,

teste mal wie er reagiert wenn Du das remote plugin im OSD display lädst.

Nur mal sehen wie er sich verhält.