Ok thanks for your help.
Works now on my old thomson tv with rgb.
Doesn't work on my tv plasma (samsung), the picture is not clear, i see like a shadowq of the picture when there is a text.
I stopped 
I'm bored.
I connected all the pins except the +5V.
nope...
I connect pin 7 to R, 5 to V 3 to B aand the three ground to pin 10 and nothing happens only a bad picture flickering
I'm going crazy 
I've a fine white line going from top to bottom of the tv when the dvb card starts.
When i launch VDR image is distorted, like a frequency problem.
Any idea?
ok.
At this time i've no picture anymore...
Only a flickering picture
I i only connect R G B and the three ground, does it work?
I tried but only a very flickering picture.
Why?
true i've no resistor between J2 and my tv.
but someone just told me the +5V is not necessary, so should the picture notbe ok when i don't plug the pin2?
ok i did it.
All is good i tested my connection with a tester.
But the picture is very poor, colors are not strong enough compared to the composite signal.
Why?
Hi,
For a rgb use, is it possible not to connect the +5V pin2?
What will this do?
Thanks
picute is awfull i dunno why...
color is bad, picture is distorted
ok.
So what should i do to enable Y/C on card number 2?
if it works i will not use the composite from card one, i will take card II as primary device for vdr.
so it's not possible for me to use Y/C when i use two FF cards?
Thanks
Hi,
I have two FF cards. One nexus and one technotrend 1.6.
How can i set vidmode=3 only fo rthe second card?
I wnat to use the Y/C outpout for the second card (technotrend)
Thanks a lot
i don't need to reboot.
It works for me without rebooting
Cya
It's now working !
Thanks a lot !
Just one thing; the vdrshutdown script work when i use the -s option. So vdrshutdown is run after a time of inactivity.
Is it possible to run the script when i poweroff manually the computer?
Thanks
Cya
void vhttpwwwabitcomtw_836a(struct biosinfo *b)
{
b->addr_sec = 0x3F;
b->addr_min = 0x40;
b->addr_hour = 0x41;
b->addr_stat = 0x47;
b->shift_stat = 5
b->addr_date = 0x51;
b->addr_stat = 0x6D /* but differs somewhere else */;
b->shift_stat = 1
b->addr_chk_h = 0x6D /* guessed */
b->addr_chk_l = 0x6E
}
/* Detection information:
{ vhttpwwwabitcomtw_836a, "vhttpwwwabitcomtw_836a", "<http://www.abit.com.tw>", "8363-686A(KT7[A][-RAID],KT7E)", "v1.0 ~ v1.2", "(null)", "<", "" },
*/
Thks for your help
I used the 'guess' prog.
I've now a newmb file.
What shoul di do with this one? Where to put it? In the nvram-wakeup.mb-c file? I don't know what to d whith that file.
Thanks for your help.
How to set up nvram wakeup for this board?
Thanks
Thanks a lot !
It's working now
I've some problems with tvtv plugin.
I start the plugin but nothing is working. I'm connected to the net, My log just says: 'tvtv update will be started ; confirmed'. And nothing more.
I entered my user pass and email.
No xml file in the /video dir.
Can someone help me?
Thanks a lot.
