xineliboutput startet nicht

BeTuX · 31. Dezember 2007

Hallo,

ich versuche mich grad an xineliboutput und er startet mir vdr nicht:

aufruf von vdr über:

Zitat

vdr -c /etc/vdr -L /usr/lib/vdr/lib -P"xineliboutput --local=fbfe --remote=none

gdb liefert mir:

Zitat

root@slax:/# gdb vdr core
GNU gdb 6.6
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i486-slackware-linux"...
Using host libthread_db library "/lib/libthread_db.so.1".

warning: Can't read pathname for load map: Input/output error.
Reading symbols from /usr/lib/libjpeg.so.62...done.
Loaded symbols for /usr/lib/libjpeg.so.62
Reading symbols from /lib/libpthread.so.0...done.
Loaded symbols for /lib/libpthread.so.0
Reading symbols from /lib/libdl.so.2...done.
Loaded symbols for /lib/libdl.so.2
Reading symbols from /usr/lib/libcap.so.1...done.
Loaded symbols for /usr/lib/libcap.so.1
Reading symbols from /usr/lib/libfreetype.so.6...done.
Loaded symbols for /usr/lib/libfreetype.so.6
Reading symbols from /usr/lib/libfontconfig.so.1...done.
Loaded symbols for /usr/lib/libfontconfig.so.1
Reading symbols from /usr/lib/libstdc++.so.6...done.
Loaded symbols for /usr/lib/libstdc++.so.6
Reading symbols from /lib/libm.so.6...done.
Loaded symbols for /lib/libm.so.6
Reading symbols from /usr/lib/libgcc_s.so.1...done.
Loaded symbols for /usr/lib/libgcc_s.so.1
Reading symbols from /lib/libc.so.6...done.
Loaded symbols for /lib/libc.so.6
Reading symbols from /lib/ld-linux.so.2...done.
Loaded symbols for /lib/ld-linux.so.2
Reading symbols from /usr/lib/libz.so.1...done.
Loaded symbols for /usr/lib/libz.so.1
Reading symbols from /usr/lib/libexpat.so.1...done.
Loaded symbols for /usr/lib/libexpat.so.1
Reading symbols from /usr/lib/gconv/ISO8859-1.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-1.so
Reading symbols from /usr/lib/gconv/ISO8859-2.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-2.so
Reading symbols from /usr/lib/gconv/ISO8859-15.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-15.so
Reading symbols from /usr/lib/gconv/ISO8859-7.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-7.so
Reading symbols from /usr/lib/gconv/ISO8859-13.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-13.so
Reading symbols from /usr/lib/gconv/ISO8859-5.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-5.so
Reading symbols from /usr/lib/gconv/ISO8859-9.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-9.so
Reading symbols from /usr/lib/vdr/lib/libvdr-xineliboutput.so.1.5.12...done.
Loaded symbols for /usr/lib/vdr/lib/libvdr-xineliboutput.so.1.5.12
Reading symbols from /lib/librt.so.1...done.
Loaded symbols for /lib/librt.so.1
Reading symbols from /usr/lib/vdr/lib/libxineliboutput-fbfe.so.1.0.0rc2...done.
Loaded symbols for /usr/lib/vdr/lib/libxineliboutput-fbfe.so.1.0.0rc2
Reading symbols from /usr/lib/libxine.so.1...done.
Loaded symbols for /usr/lib/libxine.so.1
Reading symbols from /lib/libresolv.so.2...done.
Loaded symbols for /lib/libresolv.so.2
Reading symbols from /lib/libnsl.so.1...done.
Loaded symbols for /lib/libnsl.so.1
Reading symbols from /lib/libnss_compat.so.2...done.
Loaded symbols for /lib/libnss_compat.so.2
Reading symbols from /lib/libnss_nis.so.2...done.
Loaded symbols for /lib/libnss_nis.so.2
Reading symbols from /lib/libnss_files.so.2...done.
Loaded symbols for /lib/libnss_files.so.2
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_dvd.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_dvd.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_file.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_file.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_http.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_http.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_mms.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_mms.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_pvr.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_pvr.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_v4l.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_v4l.so
Reading symbols from /usr/lib/libasound.so.2...done.
Loaded symbols for /usr/lib/libasound.so.2
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_vcd.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_vcd.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_vcdo.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_vcdo.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_dvb.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_dvb.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_cdda.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_cdda.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_decode_real.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_decode_real.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_decode_a52.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_decode_a52.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_decode_ff.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_decode_ff.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_decode_sputext.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_decode_sputext.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/post/xineplug_post_goom.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/post/xineplug_post_goom.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/post/xineplug_post_tvtime.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/post/xineplug_post_tvtime.so
Core was generated by `vdr -c /etc/vdr -L /usr/lib/vdr/lib -Pxineliboutput --local=fbfe --remote=none'.
Program terminated with signal 6, Aborted.
#0 0xb7c3bc87 in raise () from /lib/libc.so.6
/QUOTE]

heißt das, dass er bei
[QUOTE]Loaded symbols for /usr/lib/xine/plugins/1.1.8/post/xineplug_post_tvtime.so

Alles anzeigen

draufgeht?

muss ich tvtime auch installieren?

mfg,
thomas

wilderigel · 31. Dezember 2007

laeuft denn framebuffer?
was sagt das log vom vdr dazu?

BeTuX · 31. Dezember 2007

hallo,

danke an den vdr log hab ich noch gar nicht gedacht

Zitat

Dec 31 21:28:26 (none) vdr: [5395] Local decoder/display (cXinelibThread) thread started (pid=5388, tid=5395)
Dec 31 21:28:26 (none) vdr: [5395] [vdr-fe] fbfe_display_open: failed to set /dev/tty to graphics mode
Dec 31 21:28:26 (none) vdr: [5395] [vdr-fe] (ERROR (xine_fbfe_frontend.c,190): Invalid argument)
Dec 31 21:28:28 (none) vdr: [5392] CAM 1: no module present
Dec 31 21:28:28 (none) vdr: [5392] CAM 2: no module present
Dec 31 21:28:28 (none) vdr: [5395] [vdr-fe] fbfe_display_close: failed to set /dev/tty to text mode
Dec 31 21:28:28 (none) vdr: [5395] [vdr-fe] (ERROR (xine_fbfe_frontend.c,272): Invalid argument)
Dec 31 21:28:28 (none) vdr: [5395] Local decoder/display (cXinelibThread) thread ended (pid=5388, tid=5395)

Alles anzeigen

muss ich ihn nur mehr dazu krieben nicht /dev/tty zu verwenden ?!

weißt du wie ich ihm sage, dass er /dev/fb0 nehmen soll.

/dev/fb0 existiert..

Zitat

root@slax:~# fbset -i

mode "720x576-74"
# D: 41.475 MHz, H: 44.693 kHz, V: 74.488 Hz
geometry 720 576 720 1152 32
timings 24111 88 32 16 4 88 4
rgba 8/16,8/8,8/0,8/24
endmode

Frame buffer device information:
Name : UNICHROME
Address : 0xe0000000
Size : 16510976
Type : PACKED PIXELS
Visual : TRUECOLOR
XPanStep : 0
YPanStep : 1
YWrapStep : 0
LineLength : 2880
MMIO Address: 0xe4000000
MMIO Size : 16777216
Accelerator : Unknown (77)
root@slax:~#

Alles anzeigen

Zitat

root@slax:~# dfbinfo

=======================| DirectFB 1.1.1 |=======================
(c) 2001-2007 The DirectFB Organization (directfb.org)
(c) 2000-2004 Convergence (integrated media) GmbH
------------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2007-12-31 17:58)
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 5796)...
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 5797)...
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5798)...
(*) DirectFB/Input: Power Button (FF) (1) 0.1 (directfb.org)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5799)...
(*) DirectFB/Input: Power Button (CM) (2) 0.1 (directfb.org)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5800)...
(*) DirectFB/Input: Macintosh mouse button emulatio (3) 0.1 (directfb.org)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5801)...
(*) DirectFB/Input: AT Translated Set 2 keyboard (4) 0.1 (directfb.org)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5802)...
(*) DirectFB/Input: PC Speaker (5) 0.1 (directfb.org)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 5803)...
(*) DirectFB/Input: Keyboard 0.9 (directfb.org)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: VIA/S3G CLE266/UniChrome 0.4 (-)

Alles anzeigen

wilderigel · 31. Dezember 2007

ev wegen unicrom treiber?
mal mit --local=none und --remote=37890 starten?
dann kannste mit vdr-fbfe mal ein wenig experimentieren.

BeTuX · 31. Dezember 2007

der unichrome kommt vom via-fb modul.

werds mal mit remote testen.

danke!!!

BeTuX · 31. Dezember 2007

ich bekomme leider trotz allem kein bild.

vdr startet jetzt zwar, aber auch wenn ich versuche den stream mit VLC über Windwos abzugreifen, dann kommt nur ein

Zitat

Dec 31 23:33:20 (none) vdr: [8209] [xine..put] Client 0 connected: 192.168.1.4:4 643
Dec 31 23:33:20 (none) vdr: [8209] [xine..put] HTTP Request complete
Dec 31 23:33:20 (none) vdr: [8209] [xine..put] HTTP streaming primary device feed

im syslog.

schade. mal sehen ob das noch wird

gibt es an die xine-lib mindestanforderungen, die man mitkompilieren muss, damit es läuft?

ich habe zeimlich viel ausgeschalten, damit ich nciht zuviele abhängigkeiten hab.

wilderigel · 31. Dezember 2007

ev fehlt noch --primary

ansonsten sollte wenn freigegeben (svdrphosts.conf) auch empfang mittels vlc moeglich sein.

BeTuX · 31. Dezember 2007

was meinst du mit --primary ?

bei mir ist das ganze subnetz freigegeben. dies sollte also passen.

wilderigel · 31. Dezember 2007

naja, als plugin parameter

BeTuX · 31. Dezember 2007

da find ich in der doku nichts. was muss ich da mitangeben?

wilderigel · 31. Dezember 2007

-p
--primary
Force xineliboutput to be primary device when there are active frontend(s)

BeTuX · 1. Januar 2008

Hallo,

-p war die lösung. VLC geht nun mal... Super start ins neue Jahr *hehe*

danke für die Hilfe!

werds dann mal mit FB probieren.

BeTuX · 1. Januar 2008

Hallo,

bin jetzt einen Schritt weiter:

es lag am viafb Framebuffer modul -> irgendwie läuft dfbinfo auch nicht ganz durch.

habs nun mal mit dem vesa fb probiert und komm bis hier her:

Zitat

VDR server not given, searching ...
Found VDR server: host 192.168.1.2, port 37890
[5070] [vdr-fe] fbfe_display_open: failed to set /dev/tty to graphics mode
[5070] [vdr-fe] (ERROR (xine_fbfe_frontend.c,190): Invalid argument)
(*) DirectFB/Core: Single Application Core. (2007-12-31 17:58)
(*) Direct/Modules: suppress module 'keyboard'
(*) Direct/Modules: suppress module 'linux_input'
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 5072)...
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Surface: Allocated 640x480 8bit LUT8 buffer at offset 0 and pitch 640.
(*) FBDev/Mode: (Post)Setting 640x480 LUT8
(*) FBDev/Mode: Switched to 640x480 (640x480) at 8 bit LUT8 (wanted LUT8).
(!) DirectFB/FBDev: Panning display failed (x=0 y=0 ywrap=0 vbl=0)!
--> Invalid argument
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: (Post)Setting 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Switched to 640x480 (640x480) at 8 bit LUT8 (wanted LUT8).
(!) DirectFB/FBDev: Panning display failed (x=0 y=0 ywrap=0 vbl=0)!
--> Invalid argument
(*) FBDev/Surface: Allocated 640x480 8bit LUT8 buffer at offset 0 and pitch 640.
(*) FBDev/Mode: (Post)Setting 640x480 LUT8
(*) FBDev/Mode: Switched to 640x480 (640x480) at 8 bit LUT8 (wanted LUT8).
(!) DirectFB/FBDev: Panning display failed (x=0 y=0 ywrap=0 vbl=0)!
--> Invalid argument
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: (Post)Setting 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Switched to 640x480 (640x480) at 8 bit LUT8 (wanted LUT8).
(!) DirectFB/FBDev: Panning display failed (x=0 y=0 ywrap=0 vbl=0)!
--> Invalid argument
(*) FBDev/Surface: Allocated 640x480 8bit LUT8 buffer at offset 0 and pitch 640.
(*) FBDev/Mode: (Post)Setting 640x480 LUT8
(*) FBDev/Mode: Switched to 640x480 (640x480) at 8 bit LUT8 (wanted LUT8).
(!) DirectFB/FBDev: Panning display failed (x=0 y=0 ywrap=0 vbl=0)!
--> Invalid argument

Press Esc to exit

[5070] [vdr-fe] fe_xine_open: xine_open("xvdr://192.168.1.2:37890#nocache;demux:mpeg_block") failed
Error opening xvdr://192.168.1.2:37890
(*) FBDev/Surface: Allocated 640x480 8bit LUT8 buffer at offset 0 and pitch 640.
(*) FBDev/Mode: (Post)Setting 640x480 LUT8
(*) FBDev/Mode: Switched to 640x480 (640x480) at 8 bit LUT8 (wanted LUT8).
(!) DirectFB/FBDev: Panning display failed (x=0 y=0 ywrap=0 vbl=0)!
--> Invalid argument
[5070] [vdr-fe] fbfe_display_close: failed to set /dev/tty to text mode
[5070] [vdr-fe] (ERROR (xine_fbfe_frontend.c,272): Invalid argument)
root@slax:~#

Alles anzeigen

Sollte es mit vesa FB auch funktionieren?

xineliboutput startet nicht

Jetzt mitmachen!

Teilen