Hab mal ein bisschen gesucht, aber nix passendes für den LinVDR gefunden. Soweit ich das verstehe, geht es wohl nicht über ein Plugin.
Wie bindet Ihr
lm_sensors
oder
mbmon
oder
hddtemp
in LInVDR ein?
Gruß,
InZone
Hab mal ein bisschen gesucht, aber nix passendes für den LinVDR gefunden. Soweit ich das verstehe, geht es wohl nicht über ein Plugin.
Wie bindet Ihr
lm_sensors
oder
mbmon
oder
hddtemp
in LInVDR ein?
Gruß,
InZone
Moin,
es gibt ein sysinfo.plugin das einen Teil der Infos liefert.
Ansonsten kannste Dir ein script in das Befehlsmenü einbinden.
Wie das bei Deiner Distri geht und obs das Plugin dafür gibt,
kann ich Dir leider nicht sagenn.
Gruß Thomas
Hallo,
vielleicht hilft Dir das .. habe ich aber noch nicht getestet ..
Und dann Ausgabe ueber Scricpt an OSD ..
Package: sensord
Priority: extra
Section: utils
Installed-Size: 144
Maintainer: David Z Maze <dmaze@debian.org>
Architecture: i386
Source: lm-sensors
Version: 2.6.3-5
Replaces: lm-sensors (<< 2.5.4-8)
Depends: lm-sensors, libc6 (>= 2.2.4-4), libsensors1
Filename: pool/main/l/lm-sensors/sensord_2.6.3-5_i386.deb
Size: 30326
MD5sum: 2cf59d11cdd908741a81947f669b7a9d
Description: Hardware sensor information logging daemon
Lm-sensors is a hardware health monitoring package for Linux. It allows you
to access information from temperature, voltage, and fan speed sensors. It
works with most newer systems.
.
This package contains a daemon that logs hardware health status to the
system log with optional warnings on potential system problems.
.
You will need lm-sensors and i2c kernel modules to use this package.
sensord lm-sensors libc6 libsensors1
cd /pub
mkdir /pub/install
cd /pub/install
wget http://ftp.de.debian.org/debia…/sensord_2.6.3-5_i386.deb
wget http://ftp.de.debian.org/debia…-sensors_2.6.3-5_i386.deb
wget http://ftp.de.debian.org/debia…libc6_2.2.5-11.8_i386.deb
wget http://ftp.de.debian.org/debia…sensors1_2.6.3-5_i386.deb
debtool -f sensord_2.6.3-5_i386.deb
debtool -f lm-sensors_2.6.3-5_i386.deb
debtool -f libc6_2.2.5-11.8_i386.deb
debtool -f libsensors1_2.6.3-5_i386.deb
Hallo,
wenn du sensors zu laufen bekommen hast,
mußt DU das script
/usr/bin/sysinfo.sh
an Deine Bedürfnisse anpassen.
Bei mir sieht es so aus:
#!/bin/bash
case "$1" in
cputemp)
sensors | grep -i 'CPU TEMP' | cut -c 12-18 | tr -d
exit $?
;;
cpufan)
sensors | grep -i 'fan2' | cut -c 10-20 | tr -d
exit $?
;;
mbtemp)
sensors | grep -i 'M/B TEMP' | cut -c 14-20 | tr -d
exit $?
;;
mbfan)
sensors | grep -i 'fan1' | cut -c 10-20 | tr -d
exit $?
;;
vidspace)
df -h | egrep "/dev/hda1" | sed s#.\*/dev/hda1" "\*[0-9GM.]\*""\*[0-9GM.]\*" "\*## | sed s#"[ ][ ]*"#" "#g | cut -f 2 -d " "
exit $?
;;
*)
echo ""
echo "Usage: sysinfosensors.sh {cputemp|cpufan|mbtemp|mbfan|vidspace}"
echo ""
exit 1
;;
esac
exit 0
Alles anzeigen
Dann kannst Du die Ausgabe über das sysinfo Plugin anzeigen lassen.
Um sensors anzupassen hat mir glaube ich sensors-detect geholfen.
Nicolas
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!