zen2vdr geht auf 2 Boxen bei der 3ten no signal der Dom ist immer der gleiche und gen2vdr geht auch bei der 3ten Box

Hallo,

nun kurz vor dem durchdrehen bin ich dahinter gekommen das eine Box sich verweigert mir zu Dienen.

Ich vermute es liegt an den Treibern, da der Dom in den beiden anderen Boxen mit zen2vdr geht.

Gibt es da eine möglichkeit die Kiste zu überzeugen?

Im Log steht folgendes

root: /etc/vdr/plugins/admin/admin.sh -init

vdr starting

(re)building admin.conf

cat: /tmp/admin_features.conf: No such file or directory

Servus det,
das ist schon mal ein Ansatz.
Wenn du evtl. den Befehl für mich hast damit das funzt kann ich heute Nacht gut schlafen:-)
Seid zwei Tagen beschäftige ich mich intensiv mit den Kisten, mit dem Erfolg das eine 250 GB Festplatte nicht mehr tut sowie ein 2,5 GB ST1 Drive.
Nur weil ich immer und immer neu geflasht habe, da ich dachte beim Flashen ist was schief gelaufen

Bin ich der einzige mit diesem Problem? Alle anderen haben die Serie erwischt die keine Zicken macht?

Hallo giga-san,
zunächst danke das du dich meiner annimmst.
Quatsch mache ich schon, nur ist mir das in diesem Fall nicht bewusst gewesen wenn es denn an mir lag oder liegt.
Hier der Block

/root$ dmesg
bridge window [io 0x3000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xf4100000-0xf6ffffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf4100000-0xf6ffffff]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
PCI: CLS 32 bytes, default 32
platform rtc_cmos: registered platform RTC device (no PNP device found)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Btrfs loaded
aufs 2.1-standalone.tree-36-20101206
msgmni has been set to 242
io scheduler noop registered
io scheduler cfq registered (default)
Real Time Clock Driver v1.12b
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
loop: module loaded
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x244b rev 0x05)
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1800-0x1807
ide1: BM-DMA at 0x1808-0x180f
Probing IDE interface ide0...
hda: DMSTORAGE FDM032MAA, ATA DISK drive
hda: tPIO > 2, assuming tPIO = 2
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO2
hda: tPIO > 2, assuming tPIO = 2
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO2
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 63488 sectors (32 MB) w/2KiB Cache, CHS=496/4/32
hda: hda1 hda2
ide-cd driver 5.00
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:01:05.2: EHCI Host Controller
ehci_hcd 0000:01:05.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:01:05.2: irq 10, io mem 0xf4101000
ehci_hcd 0000:01:05.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1f.2: setting latency timer to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.2: irq 10, io base 0x00001820
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1f.4: setting latency timer to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1f.4: irq 12, io base 0x00001840
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:01:05.0: UHCI Host Controller
uhci_hcd 0000:01:05.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:01:05.0: irq 5, io base 0x00003040
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:01:05.1: UHCI Host Controller
uhci_hcd 0000:01:05.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:01:05.1: irq 9, io base 0x00003060
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
hub 3-0:1.0: over-current change on port 1
hub 3-0:1.0: over-current change on port 2
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
VFS: Mounted root (squashfs filesystem) readonly on device 3:2.
devtmpfs: mounted
Freeing unused kernel memory: 200k freed
intel_agp: Unknown symbol agp_bridge (err 0)
intel_agp: Unknown symbol agp_free_key (err 0)
intel_agp: Unknown symbol agp_generic_destroy_pages (err 0)
intel_agp: Unknown symbol global_cache_flush (err 0)
intel_agp: Unknown symbol agp_rebind_memory (err 0)
intel_agp: Unknown symbol agp_generic_enable (err 0)
intel_agp: Unknown symbol agp_generic_insert_memory (err 0)
intel_agp: Unknown symbol agp_generic_destroy_page (err 0)
intel_agp: Unknown symbol agp_off (err 0)
intel_agp: Unknown symbol agp_free_page_array (err 0)
intel_agp: Unknown symbol agp_remove_bridge (err 0)
intel_agp: Unknown symbol agp_generic_mask_memory (err 0)
intel_agp: Unknown symbol agp_create_memory (err 0)
intel_agp: Unknown symbol agp_generic_alloc_pages (err 0)
intel_agp: Unknown symbol agp_generic_alloc_by_type (err 0)
intel_agp: Unknown symbol agp_generic_free_by_type (err 0)
intel_agp: Unknown symbol agp_alloc_bridge (err 0)
intel_agp: Unknown symbol agp_add_bridge (err 0)
intel_agp: Unknown symbol agp_generic_remove_memory (err 0)
intel_agp: Unknown symbol agp_generic_create_gatt_table (err 0)
intel_agp: Unknown symbol agp_generic_type_to_mask_type (err 0)
intel_agp: Unknown symbol agp_generic_free_gatt_table (err 0)
intel_agp: Unknown symbol agp_generic_alloc_page (err 0)
intel_agp: Unknown symbol agp_put_bridge (err 0)
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel i815 Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
i810fb: Unknown symbol unregister_framebuffer (err 0)
i810fb: Unknown symbol fb_videomode_to_var (err 0)
i810fb: Unknown symbol fb_validate_mode (err 0)
i810fb: Unknown symbol fb_ddc_read (err 0)
i810fb: Unknown symbol i2c_bit_add_bus (err 0)
i810fb: Unknown symbol cfb_copyarea (err 0)
i810fb: Unknown symbol framebuffer_alloc (err 0)
i810fb: Unknown symbol fb_find_best_mode (err 0)
i810fb: Unknown symbol fb_destroy_modedb (err 0)
i810fb: Unknown symbol fb_edid_to_monspecs (err 0)
i810fb: Unknown symbol fb_get_mode (err 0)
i810fb: Unknown symbol fb_videomode_to_modelist (err 0)
i810fb: Unknown symbol save_vga (err 0)
i810fb: Unknown symbol fb_find_mode (err 0)
i810fb: Unknown symbol restore_vga (err 0)
i810fb: Unknown symbol fb_var_to_videomode (err 0)
i810fb: Unknown symbol register_framebuffer (err 0)
i810fb: Unknown symbol fb_alloc_cmap (err 0)
i810fb: Unknown symbol cfb_imageblit (err 0)
i810fb: Unknown symbol fb_set_suspend (err 0)
i810fb: Unknown symbol fb_firmware_edid (err 0)
i810fb: Unknown symbol cfb_fillrect (err 0)
i810fb: Unknown symbol fb_add_videomode (err 0)
i810fb: Unknown symbol fb_find_best_display (err 0)
i810fb: Unknown symbol framebuffer_release (err 0)
i810-i2c: Probe DDC1 Bus
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
i810-i2c: Probe DDC2 Bus
i2c i2c-1: unable to read EDID block.
i2c i2c-1: unable to read EDID block.
i2c i2c-1: unable to read EDID block.
i810-i2c: Probe DDC3 Bus
i810fb_init_pci: Unable to get Mode Database
I810FB: fb0 : Intel(R) 815 (Internal Graphics with AGP) Framebuffer Device v0.9.0
I810FB: Video RAM : 8192K
I810FB: Monitor : H: 26-55 KHz V: 50-50 Hz
I810FB: Mode : 720x576-32bpp@50Hz
fbcon: Unknown symbol find_font (err 0)
fbcon: Unknown symbol get_default_font (err 0)
fbcon: Unknown symbol fbcon_set_bitops (err 0)
Console: switching to colour frame buffer device 90x36
cx88xx: Unknown symbol v4l2_norm_to_name (err 0)
cx88xx: Unknown symbol v4l2_i2c_new_subdev_cfg (err 0)
cx88xx: Unknown symbol videobuf_dma_free (err 0)
cx88xx: Unknown symbol videobuf_waiton (err 0)
cx88xx: Unknown symbol __ir_input_register (err 0)
cx88xx: Unknown symbol ir_extract_bits (err 0)
cx88xx: Unknown symbol btcx_riscmem_alloc (err 0)
cx88xx: Unknown symbol tveeprom_read (err 0)
cx88xx: Unknown symbol btcx_riscmem_free (err 0)
cx88xx: Unknown symbol videobuf_dma_unmap (err 0)
cx88xx: Unknown symbol ir_decode_biphase (err 0)
cx88xx: Unknown symbol ir_keydown (err 0)
cx88xx: Unknown symbol video_device_alloc (err 0)
cx88xx: Unknown symbol v4l2_device_register (err 0)
cx88xx: Unknown symbol ir_input_unregister (err 0)
cx88xx: Unknown symbol ir_repeat (err 0)
cx88xx: Unknown symbol v4l2_i2c_tuner_addrs (err 0)
cx88xx: Unknown symbol v4l2_device_unregister (err 0)
cx88xx: Unknown symbol tveeprom_hauppauge_analog (err 0)
cx88xx: Unknown symbol video_device_release (err 0)
cx88xx: Unknown symbol get_rc_map (err 0)
cx88xx: Unknown symbol ir_decode_pulsedistance (err 0)
cx88xx: Unknown symbol ir_dump_samples (err 0)
cx88xx: Unknown symbol videobuf_to_dma (err 0)
Linux video capture interface: v2.00
cx88_dvb: Unknown symbol cx8802_get_driver (err 0)
cx88_dvb: Unknown symbol videobuf_dvb_alloc_frontend (err 0)
cx88_dvb: Unknown symbol cx8802_unregister_driver (err 0)
cx88_dvb: Unknown symbol cx8802_register_driver (err 0)
cx88_dvb: Unknown symbol videobuf_dvb_get_frontend (err 0)
cx88_dvb: Unknown symbol cx8802_buf_prepare (err 0)
cx88_dvb: Unknown symbol dvb_frontend_detach (err 0)
cx88_dvb: Unknown symbol videobuf_dvb_unregister_bus (err 0)
cx88_dvb: Unknown symbol videobuf_dvb_register_bus (err 0)
cx88_dvb: Unknown symbol dvb_unregister_frontend (err 0)
cx88_dvb: Unknown symbol cx8802_buf_queue (err 0)
cx88_dvb: Unknown symbol videobuf_dvb_dealloc_frontends (err 0)
cx88_dvb: Unknown symbol videobuf_dvb_find_frontend (err 0)
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded
cx88[0]: Your board isn't known (yet) to the driver. You can
cx88[0]: try to pick one of the existing card configs via
cx88[0]: card=<n> insmod option. Updating to the latest
cx88[0]: version might help as well.
cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
cx88[0]: card=0 -> UNKNOWN/GENERIC
cx88[0]: card=1 -> Hauppauge WinTV 34xxx models
cx88[0]: card=2 -> GDI Black Gold
cx88[0]: card=3 -> PixelView
cx88[0]: card=4 -> ATI TV Wonder Pro
cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert
cx88[0]: card=6 -> AverTV Studio 303 (M126)
cx88[0]: card=7 -> MSI TV-@nywhere Master
cx88[0]: card=8 -> Leadtek Winfast DV2000
cx88[0]: card=9 -> Leadtek PVR 2000
cx88[0]: card=10 -> IODATA GV-VCP3/PCI
cx88[0]: card=11 -> Prolink PlayTV PVR
cx88[0]: card=12 -> ASUS PVR-416
cx88[0]: card=13 -> MSI TV-@nywhere
cx88[0]: card=14 -> KWorld/VStream XPert DVB-T
cx88[0]: card=15 -> DViCO FusionHDTV DVB-T1
cx88[0]: card=16 -> KWorld LTV883RF
cx88[0]: card=17 -> DViCO FusionHDTV 3 Gold-Q
cx88[0]: card=18 -> Hauppauge Nova-T DVB-T
cx88[0]: card=19 -> Conexant DVB-T reference design
cx88[0]: card=20 -> Provideo PV259
cx88[0]: card=21 -> DViCO FusionHDTV DVB-T Plus
cx88[0]: card=22 -> pcHDTV HD3000 HDTV
cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T
cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
cx88[0]: card=26 -> IODATA GV/BCTV7E
cx88[0]: card=27 -> PixelView PlayTV Ultra Pro (Stereo)
cx88[0]: card=28 -> DViCO FusionHDTV 3 Gold-T
cx88[0]: card=29 -> ADS Tech Instant TV DVB-T PCI
cx88[0]: card=30 -> TerraTec Cinergy 1400 DVB-T
cx88[0]: card=31 -> DViCO FusionHDTV 5 Gold
cx88[0]: card=32 -> AverMedia UltraTV Media Center PCI 550
cx88[0]: card=33 -> Kworld V-Stream Xpert DVD
cx88[0]: card=34 -> ATI HDTV Wonder
cx88[0]: card=35 -> WinFast DTV1000-T
cx88[0]: card=36 -> AVerTV 303 (M126)
cx88[0]: card=37 -> Hauppauge Nova-S-Plus DVB-S
cx88[0]: card=38 -> Hauppauge Nova-SE2 DVB-S
cx88[0]: card=39 -> KWorld DVB-S 100
cx88[0]: card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid
cx88[0]: card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro
cx88[0]: card=43 -> KWorld/VStream XPert DVB-T with cx22702
cx88[0]: card=44 -> DViCO FusionHDTV DVB-T Dual Digital
cx88[0]: card=45 -> KWorld HardwareMpegTV XPert
cx88[0]: card=46 -> DViCO FusionHDTV DVB-T Hybrid
cx88[0]: card=47 -> pcHDTV HD5500 HDTV
cx88[0]: card=48 -> Kworld MCE 200 Deluxe
cx88[0]: card=49 -> PixelView PlayTV P7000
cx88[0]: card=50 -> NPG Tech Real TV FM Top 10
cx88[0]: card=51 -> WinFast DTV2000 H
cx88[0]: card=52 -> Geniatech DVB-S
cx88[0]: card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
cx88[0]: card=54 -> Norwood Micro TV Tuner
cx88[0]: card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM
cx88[0]: card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder
cx88[0]: card=57 -> ADS Tech Instant Video PCI
cx88[0]: card=58 -> Pinnacle PCTV HD 800i
cx88[0]: card=59 -> DViCO FusionHDTV 5 PCI nano
cx88[0]: card=60 -> Pinnacle Hybrid PCTV
cx88[0]: card=61 -> Leadtek TV2000 XP Global
cx88[0]: card=62 -> PowerColor RA330
cx88[0]: card=63 -> Geniatech X8000-MT DVBT
cx88[0]: card=64 -> DViCO FusionHDTV DVB-T PRO
cx88[0]: card=65 -> DViCO FusionHDTV 7 Gold
cx88[0]: card=66 -> Prolink Pixelview MPEG 8000GT
cx88[0]: card=67 -> Kworld PlusTV HD PCI 120 (ATSC 120)
cx88[0]: card=68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid
cx88[0]: card=69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2
cx88[0]: card=70 -> TeVii S460 DVB-S/S2
cx88[0]: card=71 -> Omicom SS4 DVB-S/S2 PCI
cx88[0]: card=72 -> TBS 8920 DVB-S/S2
cx88[0]: card=73 -> TeVii S420 DVB-S
cx88[0]: card=74 -> Prolink Pixelview Global Extreme
cx88[0]: card=75 -> PROF 7300 DVB-S/S2
cx88[0]: card=76 -> SATTRADE ST4200 DVB-S/S2
cx88[0]: card=77 -> TBS 8910 DVB-S
cx88[0]: card=78 -> Prof 6200 DVB-S
cx88[0]: card=79 -> Terratec Cinergy HT PCI MKII
cx88[0]: card=80 -> Hauppauge WinTV-IR Only
cx88[0]: card=81 -> Leadtek WinFast DTV1800 Hybrid
cx88[0]: card=82 -> WinFast DTV2000 H rev. J
cx88[0]: card=83 -> Prof 7301 DVB-S/S2
cx88[0]: card=84 -> Samsung SMT 7020 DVB-S
cx88[0]: subsystem: ffff:ffff, board: UNKNOWN/GENERIC [card=0,autodetected], frontend(s): 0
cx88[0]: TV tuner type -1, Radio tuner type -1
tuner 3-0068: chip found @ 0xd0 (cx88[0])
cx88[0]/2: cx2388x 8802 Driver Manager
cx88/2: cx2388x dvb driver version 0.0.8 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
Intel ICH 0000:00:1f.5: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 50944 usecs (2450 samples)
intel8x0: clocking to 48000
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:01:08.0: setting latency timer to 64
e100 0000:01:08.0: PME# disabled
e100 0000:01:08.0: eth0: addr 0xf4100000, irq 7, MAC addr 00:00:f0:e9:04:0b
w83627hf: Found W83627HF chip at 0x290
e100 0000:01:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
sshd (159): /proc/159/oom_adj is deprecated, please use /proc/159/oom_score_adj instead.
e100 0000:01:08.0: eth0: NIC Link is Down
e100 0000:01:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex

Das zu beginn verstehe ich, das zum Schluss nicht?

Dann daraus noch ein update machen (damit es den reboot ueberlebt) Source code
1 tar cvzf /tmp/config/update/upd-mymodules.tgz /etc/init.d/S12modules

Mein updates Verzeichnis ist leer? Ich habe dann die Datei
upd-mymodules.tgz erstellt und den Befehl
/etc/init.d/S12modules

eingetragen. Leider ohne Erfolg

Ich sach mal Danke ein Fettes Danke.
Kaum macht man es richtig geht es auch, dazu folgende Finale Frage.
Sollte ich den Dom, oder eine Festplatte wechseln muss ich das immer ergänzen oder ist die Box jetzt OK?

Hallo det,
danke dennoch wenn ich den Schiss verzapft habe und ich Glaube das war als ich gen2vdr installiert habe.
Vor ca. 2 Jahren da hab ich einfach zentoo nicht zum Laufen gebracht, naja und da habe ich folgende Befehle unter gen2vdr ausgeführt.

***
/etc/init.d/vdr stop
/_config/bin/dvbmod unload
echo "options cx88xx card=58" >> /etc/modprobe.d/dvb
update-modules -f
/_config/bin/dvbmod load
/etc/init.d/vdr start
***

So in etwa, ich finde das Thema gerade nicht, jedenfalls hatte mir damals HelAu geholfen.
Da hatte ich genau mit der Box no signal Probleme.