Hi, all
Gesundes neues Jahr erstmal
Vielleicht kann mir einer weiterhelfen, google schon über die Jahreswende (zwischendurch auch gefeiter) und bekomme keine Lösung für mein Prob!
Hab mir zu Weihnachten neue HW gegönnt und wie ja allgemein bekannt bringt das Probs mit sich...
Mir scheint, als ob der UDMA Moduns bei meiner zweiten SATAII HDD nicht aktiev scheint:
Erste HDD als P-ATA Master
/dev/sda:
Model=SAMSUNG SP0802N , FwRev=TK200-04, SerialNo=S02FJ10YA01643
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=?16?
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156368016
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-7 T13 1532D revision 0: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
Timing cached reads: 1654 MB in 2.00 seconds = 827.46 MB/sec
Timing buffered disk reads: 160 MB in 3.00 seconds = 53.28 MB/sec
Display More
Zweite als S-STA
/dev/sdb:
Model=SAMSUNG SP2004C , FwRev=VM100-41, SerialNo=S07GJ10L513917
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=?16?
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: unknown: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
Timing cached reads: 1778 MB in 2.00 seconds = 889.65 MB/sec
Timing buffered disk reads: 114 MB in 3.07 seconds = 37.11 MB/sec
Display More
DVD-Brenner P-ATA Slave
/dev/sr0:
Model=PIONEER DVD-RW DVR-110D , FwRev=1.39 , SerialNo=
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=13395, BuffSize=64kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4
AdvancedPM=no
Drive conforms to: Unspecified: ATA/ATAPI-2,3,4,5
* signifies the current active mode
Timing cached reads: 1666 MB in 2.00 seconds = 833.03 MB/sec
Timing buffered disk reads: 8 MB in 3.13 seconds = 2.56 MB/sec
Display More
OS openSuSE 10.3, Kernel 2.6.22.13-0.3-default MoBo ASROCK SoAM2 ALiveNF7G-HDready
Frage sind die Werte soweit IO? Weil ich habe das gefühl, das die S-ATA Platte nicht im UDMA Modus läuft und nach längerer Arbeit mit dem PC ziemlich lange auf der Platte rödelt bis die Daten aufgerufen werden, dachte das es von der Patte nur so flutscht, aber denkste...
dmesg | grep UDMA
ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
ata1.00: ATAPI: PIONEER DVD-RW DVR-110D, 1.39, max UDMA/66
ata1.01: ATA-7: SAMSUNG SP0802N, TK200-04, max UDMA/100
ata1.00: configured for UDMA/66
ata1.01: configured for UDMA/100
ata3: SATA max UDMA/133 cmd 0xffffc20001504100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 23
ata4: SATA max UDMA/133 cmd 0xffffc20001504180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 23
ata5: SATA max UDMA/133 cmd 0xffffc20001504200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 23
ata6: SATA max UDMA/133 cmd 0xffffc20001504280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 23
ata3.00: ATA-7: SAMSUNG SP2004C, VM100-41, max UDMA7
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3.00: configured for UDMA/133
Display More
Wer kennt sich damit aus und klärt mich mal auf!?
Mfg SVen