Hallo zusammen,
Ich habe mir eine Creative Labs CT7240 geholt um über den zugehörigen TV-Out Videos am Fernseher anzuschauen, dabei will aber irgendwie kein Bild kommen.
Hab im Internet auch keine Informationen gefunden, ob die CT7240 auch wirklich unterstützt wird, lscpi sagt:
Quote
03:01.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder (rev 02)
Und dxr3config:
QuoteDisplay MoreThis is dxr3config 0.3.2
Checking your dxr3 hard- and software.........
loading module adv717x [ OK ]
loading module bt865 [ OK ]
loading module em8300 [ OK ]
detecting dxr3-hardware [ OK ]
dxr3 hardware revision [ 02 ]
detecting adv717x/bt865 [ adv717x ]
Card revision: [ 2 ]
Chip revision: [ 2 ]
Video Encoder: [ ADV7175 ]
Module Version: [ 0.16.4 ]
looking for em8300setup [ /usr/bin/em8300setup ]
looking for Microcode [ FAILED ]
detecting device /dev/em8300-0 [ OK ]
detecting device /dev/em8300_mv-0 [ OK ]
detecting device /dev/em8300_ma-0 [ FAILED ]
detecting device /dev/em8300_sp-0 [ OK ]
trying to remove the modules...
removing modul em8300 [ OK ]
removing modul adv717x [ OK ]
removing modul bt865 [ OK ]
Das Problem ist hier wahrscheinlich der Microcode, den dxr3config nicht lädt, em8300setup allerdings schon:
QuoteMicrocode uploaded to /dev/em8300-0
Current settings are:
Cannot read audio : em8300 Driver returned 22 (unknown)
Video Aspect Audio Spu
PAL 4:3 ??? OFF
Weils so schön is hier nochmal ein Teil aus dmesg:
QuoteDisplay More[ 1755.051766] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 1755.051773] em8300: EM8300 8300 (rev 2) bus: 3, devfn: 8, irq: 17, memory: 0xfdd00000.
[ 1755.051786] em8300: mapped-memory at 0xf9500000
[ 1755.052616] em8300: using MTRR
[ 1755.052636] em8300_main.o: Chip revision: 2
[ 1755.066634] adv717x.o: ADV7175A chip detected
[ 1757.571229] i2c-adapter i2c-2: sendbytes: error - bailout.
[ 1757.571790] i2c-adapter i2c-2: sendbytes: error - bailout.
[ 1757.572565] i2c-adapter i2c-2: sendbytes: error - bailout.
[ 1757.573896] i2c-adapter i2c-2: sendbytes: error - bailout.
[ 1757.577165] i2c-adapter i2c-2: sendbytes: error - bailout.
[ 1757.578628] i2c-adapter i2c-2: sendbytes: error - bailout.
[ 1757.830223] em8300: Microcode version 0x29 loaded
[ 1759.850643] Fifo still full, trying stop
[ 1761.313382] em8300: DICOM Update failed
[ 1761.328875] em8300_video.o: Video sync interrupted
Und cat /proc/em8300/0:
QuoteDisplay More----- Driver Info -----
em8300 module version 0.16.4
Card revision 2
Chip revision 2
Video encoder: ADV7175 at address 0x6a on EM8300 I2C bus 1
EEPROM data:
1022000000020000000100000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000
ffffffffffffffffffffffffffffffff00000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000055
1022000000020000000100000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000
ffffffffffffffffffffffffffffffff00000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000055
EEPROM checksum: 2a18023f058f7d22c30361925044124f
Memory mapped at address range 0xf9500000->0xf9600000 (FIFOs using MTRR)
Microcode version 0x29 loaded
Display buffer resolution: 720x480
Dicom set to TV-out
Using PAL
Aspect is 4:3
Analog audio output
Ich habe via Video-Kabel die Karte vom TV-Out an den Videoeingang des Fernsehers angeschlossen und versucht via mplayer über den dxr3 output Treiber n Film zu gucken, aber am TV kommt kein Bild an.
Könnt ihr mir weiterhelfen? Bin für alle Vorschläge offen