Linux version 2.6.15-vdr (root@vdr) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Tue Jan 3 12:40:37 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000eff0000 (usable) BIOS-e820: 000000000eff0000 - 000000000eff3000 (ACPI NVS) BIOS-e820: 000000000eff3000 - 000000000f000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 239MB LOWMEM available. DMI 2.2 present. ACPI: PM-Timer IO Port: 0x408 Allocating PCI resources starting at 10000000 (gap: 0f000000:f0ff0000) Built 1 zonelists Kernel command line: BOOT_IMAGE=Experimental ro root=305 console=ttyS0,19200 console=tty0 NOCOLDPLUG=yes root=/dev/hda5 udev_timeout=10 ide1=noprobe ide2=noprobe ide3=noprobe ide4=noprobe ide5=noprobe noresume splash=silent ide_setup: ide1=noprobe ide_setup: ide2=noprobe ide_setup: ide3=noprobe ide_setup: ide4=noprobe ide_setup: ide5=noprobe No local APIC present or hardware disabled Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 599.811 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 238680k/245696k available (1786k kernel code, 6536k reserved, 630k data, 148k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1200.79 BogoMIPS (lpj=2401582) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 64K (32 bytes/line) mtrr: v2.0 (20020519) CPU: Centaur VIA Samuel 2 stepping 03 Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 9e00) checking if image is initramfs... it is Freeing initrd memory: 1127k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb260, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 0400-047f claimed by vt8235 PM PCI quirk: region 0500-050f claimed by vt8235 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:01: ioport range 0x400-0x47f could not be reserved pnp: 00:01: ioport range 0x500-0x50f has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: dc000000-ddffffff PREFETCH window: d8000000-dbffffff SGI XFS with ACLs, security attributes, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Real Time Clock Driver v1.12 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 15 PCI: setting IRQ 15 as level-triggered ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 15 (level, low) -> IRQ 15 PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio hda: IC35L120AVV207-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 1024KiB hda: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 > mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered TCP bic registered NET: Registered protocol family 1 Using IPI Shortcut mode ACPI wakeup devices: PCI0 USB0 USB1 USB2 USB3 USB4 USB5 USB6 LAN0 AC97 MC97 UAR1 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 148k freed input: AT Translated Set 2 keyboard as /class/input/input1 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] ppdev: user-space parallel port driver via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 15 (level, low) -> IRQ 15 eth0: VIA Rhine II at 0xde011000, 00:40:63:c3:56:ca, IRQ 15. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SCSI subsystem initialized XFS mounting filesystem hda7 Linux video capture interface: v1.00 saa7146: register extension 'dvb'. ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 15 (level, low) -> IRQ 15 saa7146: found saa7146 @ mem cf8a8000 (revision 1, irq 15) (0x13c2,0x0003). DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X). adapter has MAC addr = 00:d0:5c:21:40:4c dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80fd2623 dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: Crystal audio DAC @ card 0 detected saa7146_vv: saa7146 (0): registered device video0 [v4l2] DVB: registering frontend 0 (ST STV0299 DVB-S)... input: DVB on-card IR receiver as /class/input/input2 dvb-ttpci: found av7110-0. b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully flexcop-pci: will use the HW PID filter. flexcop-pci: card revision 2 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 DVB: registering new adapter (FlexCop Digital TV device). b2c2-flexcop: MAC address = 00:d0:d7:02:a8:3c b2c2-flexcop: found the stv0299 at i2c address: 0x68 DVB: registering frontend 1 (ST STV0299 DVB-S)... b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete Adding 530136k swap on /dev/hda2. Priority:42 extents:1 across:530136k eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 17 Oops: 0000 [#1] Modules linked in: button nfsd lockd nfs_acl sunrpc vt1211 hwmon_vid hwmon eeprom i2c_isa i2c_viapro af_packet b2c2_flexcop_pci b2c2_flexcop mt352 bcm3510 dvb_pll nxt2002 stv0297_cs2 lgdt330x mt312 dvb_ttpci l64781 ves1820 stv0299 tda8083 stv0297 sp8870 firmware_class ves1x93 ttpci_eeprom i2c_core saa7146_vv saa7146 dvb_core video_buf v4l2_common v4l1_compat videodev sd_mod scsi_mod evdev via_rhine mii ppdev parport_pc parport CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010286 (2.6.15-vdr) EIP is at dvb_dmxdev_ts_callback+0x1a/0x260 [dvb_core] eax: 00000000 ebx: cf8b71c8 ecx: 00000000 edx: 0000004f esi: cf99113c edi: cda0e000 ebp: 0000004f esp: c035ff30 ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, threadinfo=c035e000 task=c030ab00) Stack: cf8ba148 00000000 0000004f cda0e000 cf8b71c8 cf99113c cda0e000 0000004f cf8d14a3 00000000 cf8b71c8 00000000 00000000 cd978000 00000201 00000002 00411007 cf8d15f6 00000000 cf8b71c8 00000000 cd978000 00000000 c03d36e8 Call Trace: [] DvbDmxFilterCallback+0xa3/0xe0 [dvb_ttpci] [] debiirq+0x116/0x250 [dvb_ttpci] [] tasklet_action+0x3a/0x60 [] __do_softirq+0x35/0x80 [] do_softirq+0x22/0x30 [] do_IRQ+0x1e/0x30 [] common_interrupt+0x1a/0x20 [] default_idle+0x2b/0x60 [] cpu_idle+0x42/0x60 [] start_kernel+0x16b/0x170 Code: 5b 5e 5f 31 c0 5d c3 8d 76 00 8d bc 27 00 00 00 00 55 57 56 53 83 ec 10 89 44 24 0c 89 54 24 08 89 4c 24 04 8b 44 24 28 8b 40 08 <8b> 50 14 85 d2 0f 84 2a 02 00 00 4a 75 05 83 c0 54 eb 06 8b 40 <0>Kernel panic - not syncing: Fatal exception in interrupt