Linux version 2.6.12-gentoo (root@vdr01) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #3 Thu Jun 30 11:25:59 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ca000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ef0000 (usable) BIOS-e820: 0000000007ef0000 - 0000000007eff000 (ACPI data) BIOS-e820: 0000000007eff000 - 0000000007f00000 (ACPI NVS) BIOS-e820: 0000000007f00000 - 0000000008000000 (usable) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 128MB LOWMEM available. On node 0 totalpages: 32768 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 28672 pages, LIFO batch:15 HighMem zone: 0 pages, LIFO batch:1 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f86d0 ACPI: RSDT (v001 PTLTD RSDT 0x06040001 LTP 0x00000000) @ 0x07efd19c ACPI: FADT (v001 FSC D1231 0x06040001 0x000f4240) @ 0x07efd1c8 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040001 LTP 0x00000001) @ 0x07efefd8 ACPI: DSDT (v001 FSC D1231 0x06040001 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0xf008 Allocating PCI resources starting at 08000000 (gap: 08000000:f7b80000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=2.6-AF-PN ro root=302 acpi=force pci=noacpi video=vesafb:off Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 847.438 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 124776k/131072k available (3056k kernel code, 5716k reserved, 1028k data, 160k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1679.36 BogoMIPS (lpj=839680) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Celeron (Coppermine) stepping 0a Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd9a3, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:06.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/2410] at 0000:00:1f.0 Simple Boot Flag at 0x69 set to 0x1 Machine check exception polling timer started. inotify device minor=63 devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). JFS: nTxBlock = 975, nTxLock = 7806 SGI XFS with large block numbers, no debug enabled Initializing Cryptographic API Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel i810 chipset, but could not find the secondary device. [drm] Initialized drm 1.0.0 20040925 ACPI: Power Button (FF) [PWRF] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH: IDE controller at PCI slot 0000:00:1f.1 ICH: chipset revision 2 ICH: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ST380021A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33) hda: cache flushes not supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 > hdc: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.11 loaded. ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.2 PCI: setting IRQ 9 as level-triggered PCI: Assigned IRQ 9 for device 0000:00:1f.2 PCI: Sharing IRQ 9 with 0000:01:08.0 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: Intel Corporation 82801AA USB uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usb 1-1: new low speed USB device using uhci_hcd and address 2 usbcore: registered new driver hiddev input: USB HID v1.00 Keyboard [046a:0001] on usb-0000:00:1f.2-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC). ALSA device list: No soundcards found. oprofile: using timer interrupt. NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: PCI0 PCIH USB AC97 MC97 KEYB PS2M COM1 ACPI: (supports S0 S1 S3 S4 S5) input: AT Translated Set 2 keyboard on isa0060/serio0 EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 160k freed kjournald starting. Commit interval 5 seconds input: PS/2 Logitech Mouse on isa0060/serio1 Adding 266104k swap on /dev/hda3. Priority:-1 extents:1 ts: Compaq touchscreen protocol output EXT3 FS on hda2, internal journal Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. i2c /dev entries driver natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002 originally by Donald Becker http://www.scyld.com/network/natsemi.html 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder PCI: Assigned IRQ 9 for device 0000:01:08.0 PCI: Sharing IRQ 9 with 0000:00:1f.2 natsemi eth0: NatSemi DP8381[56] at 0xfc010000 (0000:01:08.0), 00:00:04:14:06:06, IRQ 9, port TP. Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A PCI: setting IRQ 5 as level-triggered PCI: Assigned IRQ 5 for device 0000:00:1f.5 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:01:07.0 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49158 usecs intel8x0: clocking to 48000 Linux video capture interface: v1.00 kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. saa7146: register extension 'dvb'. PCI: setting IRQ 11 as level-triggered PCI: Assigned IRQ 11 for device 0000:01:09.0 PCI: Sharing IRQ 11 with 0000:01:06.0 saa7146: found saa7146 @ mem c89c0000 (revision 1, irq 11) (0x110a,0x0000). DVB: registering new adapter (Fujitsu Siemens DVB-C). adapter has MAC addr = 00:d0:5c:02:07:03 dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261e dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: DVB-C analog module @ card 0 detected, initializing MSP3400 saa7146_vv: saa7146 (0): registered device video0 [v4l2] saa7146_vv: saa7146 (0): registered device vbi0 [v4l2] DVB: registering frontend 0 (VLSI VES1820 DVB-C)... dvb-ttpci: found av7110-0. saa7146: register extension 'budget dvb'. saa7146: register extension 'budget_ci dvb'. saa7146: register extension 'budget dvb /w video in'. usbcore: registered new driver Technotrend/Hauppauge USB-Nova usbcore: registered new driver ttusb-dec b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully usbcore: registered new driver Technisat/B2C2 FlexCop II/IIb/III USB flexcop-pci: will use the HW PID filter. flexcop-pci: card revision 2 PCI: Assigned IRQ 5 for device 0000:01:07.0 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.5 DVB: registering new adapter (FlexCop Digital TV device). b2c2-flexcop: MAC address = 00:d0:d7:0c:e7:bf b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: found the mt352 at i2c address: 0x0f DVB: registering frontend 1 (Zarlink MT352 DVB-T)... b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete usbcore: registered new driver cinergyT2 usbcore: registered new driver dvb-usb-vp7045 usbcore: registered new driver dtt200u usbcore: registered new driver DiBcom based USB DVB-T devices (DiB3000M-B based) usbcore: registered new driver DiBcom based USB2.0 DVB-T (DiB3000M-C/P based) devices usbcore: registered new driver AVerMedia AverTV DVB-T USB 2.0 (A800) usbcore: registered new driver Hauppauge WinTV-NOVA-T usb2 usbcore: registered new driver HanfTek UMT-010 USB2.0 DVB-T devices usbcore: registered new driver Nebula Electronics uDigiTV DVB-T USB2.0 device usbcore: registered new driver cxusb eth0: DSPCFG accepted after 0 usec. eth0: link up. eth0: Setting full-duplex based on negotiated link capability. eth0: remaining active for wake-on-lan eth0: DSPCFG accepted after 0 usec. eth0: link up. eth0: Setting full-duplex based on negotiated link capability.