[ 10.708] X.Org X Server 1.19.6 Release Date: 2017-12-20 [ 10.708] X Protocol Version 11, Revision 0 [ 10.708] Build Operating System: Linux 4.4.0-138-generic x86_64 Ubuntu [ 10.708] Current Operating System: Linux nuc-wz 4.18.0-13-generic #14~18.04.1-Ubuntu SMP Thu Dec 6 14:09:52 UTC 2018 x86_64 [ 10.708] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-13-generic root=UUID=99b59cf6-c068-4ffc-bc4c-36565c8bd46f ro quiet splash vt.handoff=1 [ 10.708] Build Date: 25 October 2018 04:11:27PM [ 10.708] xorg-server 2:1.19.6-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support) [ 10.708] Current version of pixman: 0.34.0 [ 10.708] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 10.708] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 10.708] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 20 11:46:53 2019 [ 10.712] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 10.712] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 10.714] (==) No Layout section. Using the first Screen section. [ 10.714] (**) |-->Screen "Screen0" (0) [ 10.714] (**) | |-->Monitor "DP1" [ 10.714] (**) | |-->Device "Device0" [ 10.714] (==) Automatically adding devices [ 10.714] (==) Automatically enabling devices [ 10.714] (==) Automatically adding GPU devices [ 10.714] (==) Automatically binding GPU devices [ 10.714] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 10.715] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 10.715] Entry deleted from font path. [ 10.715] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 10.715] Entry deleted from font path. [ 10.715] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 10.715] Entry deleted from font path. [ 10.715] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. [ 10.715] Entry deleted from font path. [ 10.715] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 10.715] Entry deleted from font path. [ 10.715] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 10.715] Entry deleted from font path. [ 10.715] (==) FontPath set to: /usr/share/fonts/X11/misc, built-ins [ 10.715] (==) ModulePath set to "/usr/lib/xorg/modules" [ 10.715] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 10.715] (II) Loader magic: 0x5565c12a3020 [ 10.715] (II) Module ABI versions: [ 10.715] X.Org ANSI C Emulation: 0.4 [ 10.715] X.Org Video Driver: 23.0 [ 10.715] X.Org XInput driver : 24.1 [ 10.715] X.Org Server Extension : 10.0 [ 10.715] (++) using VT number 7 [ 10.715] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 10.716] (II) xfree86: Adding drm device (/dev/dri/card0) [ 10.721] (--) PCI:*(0:0:2:0) 8086:3ea5:8086:2074 rev 1, Mem @ 0x50000000/16777216, 0x40000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072 [ 10.721] (II) LoadModule: "glx" [ 10.722] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 10.732] (II) Module glx: vendor="X.Org Foundation" [ 10.732] compiled for 1.19.6, module version = 1.0.0 [ 10.732] ABI class: X.Org Server Extension, version 10.0 [ 10.732] (II) LoadModule: "intel" [ 10.733] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 10.737] (II) Module intel: vendor="X.Org Foundation" [ 10.738] compiled for 1.19.5, module version = 2.99.917 [ 10.738] Module class: X.Org Video Driver [ 10.738] ABI class: X.Org Video Driver, version 23.0 [ 10.738] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 10.738] (II) intel: Driver for Intel(R) HD Graphics [ 10.738] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 10.738] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics [ 10.744] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20180514 [ 10.744] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20171229-1 (Timo Aaltonen ) [ 10.744] (II) intel(0): SNA compiled for use with valgrind [ 10.764] (WW) intel(0): Unknown chipset [ 10.764] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads [ 10.764] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 10.764] (==) intel(0): RGB weight 888 [ 10.764] (==) intel(0): Default visual is TrueColor [ 10.764] (**) intel(0): Option "CustomEDID" "DP1:/etc/X11/edid.DP-1.bin" [ 10.764] (**) intel(0): Option "TearFree" "true" [ 10.765] (II) intel(0): Output DP1 using monitor section DP1 [ 10.766] (**) intel(0): Loading EDID from "/etc/X11/edid.DP-1.bin" for output DP1 [ 10.766] (II) intel(0): Enabled output DP1 [ 10.766] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 10.766] (II) intel(0): Output VIRTUAL1 has no monitor section [ 10.766] (II) intel(0): Enabled output VIRTUAL1 [ 10.810] (II) intel(0): EDID for output DP1 [ 10.810] (II) intel(0): Manufacturer: ONK Model: f71 Serial#: 0 [ 10.810] (II) intel(0): Year: 2015 Week: 0 [ 10.810] (II) intel(0): EDID Version: 1.3 [ 10.810] (II) intel(0): Digital Display Input [ 10.810] (II) intel(0): Max Image Size [cm]: horiz.: 111 vert.: 62 [ 10.810] (II) intel(0): Gamma: 2.20 [ 10.810] (II) intel(0): No DPMS capabilities specified [ 10.810] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 10.810] (II) intel(0): First detailed timing is preferred mode [ 10.810] (II) intel(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595 [ 10.810] (II) intel(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298 [ 10.810] (II) intel(0): Supported established timings: [ 10.810] (II) intel(0): 640x480@60Hz [ 10.810] (II) intel(0): 800x600@60Hz [ 10.810] (II) intel(0): 1024x768@60Hz [ 10.810] (II) intel(0): Manufacturer's mask: 0 [ 10.810] (II) intel(0): Supported standard timings: [ 10.810] (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 10.810] (II) intel(0): Supported detailed timing: [ 10.810] (II) intel(0): clock: 148.5 MHz Image Size: 1107 x 623 mm [ 10.810] (II) intel(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0 [ 10.810] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 10.810] (II) intel(0): Supported detailed timing: [ 10.810] (II) intel(0): clock: 85.5 MHz Image Size: 1103 x 623 mm [ 10.810] (II) intel(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0 [ 10.810] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0 [ 10.810] (II) intel(0): Monitor name: TX-NR747 [ 10.810] (II) intel(0): Ranges: V min: 23 V max: 76 Hz, H min: 15 H max: 81 kHz, PixClock max 155 MHz [ 10.810] (II) intel(0): Supported detailed timing: [ 10.810] (II) intel(0): clock: 79.5 MHz Image Size: 1038 x 623 mm [ 10.810] (II) intel(0): h_active: 1280 h_sync: 1344 h_sync_end 1472 h_blank_end 1664 h_border: 0 [ 10.810] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 778 v_blanking: 798 v_border: 0 [ 10.810] (II) intel(0): Supported detailed timing: [ 10.810] (II) intel(0): clock: 27.0 MHz Image Size: 831 x 623 mm [ 10.810] (II) intel(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0 [ 10.810] (II) intel(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0 [ 10.810] (II) intel(0): Number of EDID sections to follow: 1 [ 10.810] (II) intel(0): EDID (in hex): [ 10.810] (II) intel(0): 00ffffffffffff003dcb710f00000000 [ 10.810] (II) intel(0): 00190103806f3e780a0dc9a057479827 [ 10.810] (II) intel(0): 12484c21080081800101010101010101 [ 10.810] (II) intel(0): 010101010101023a80d072382d40102c [ 10.810] (II) intel(0): 4580536f4200001e662150b051001b30 [ 10.810] (II) intel(0): 407036004f6f4200001e000000fc0054 [ 10.810] (II) intel(0): 582d4e523734370a20202020000000fd [ 10.810] (II) intel(0): 00174c0f510f000a20202020202001d9 [ 10.810] (II) intel(0): 020340704c1f10201304140512110302 [ 10.810] (II) intel(0): 013b097f070f7f071707503f06c04902 [ 10.810] (II) intel(0): 005706015f7e035f7e01677f01834f00 [ 10.810] (II) intel(0): 006e030c004100b82de01a0e2d178000 [ 10.810] (II) intel(0): 0e1f008051001e30408037000e6f4200 [ 10.810] (II) intel(0): 001c8c0ad090204031200c4055003f6f [ 10.810] (II) intel(0): 32000018000000000000000000000000 [ 10.810] (II) intel(0): 00000000000000000000000000000098 [ 10.810] (II) intel(0): EDID vendor "ONK", prod id 3953 [ 10.810] (II) intel(0): Using EDID range info for horizontal sync [ 10.810] (II) intel(0): Using EDID range info for vertical refresh [ 10.810] (II) intel(0): Printing DDC gathered Modelines: [ 10.810] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz eP) [ 10.810] (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e) [ 10.810] (II) intel(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 10.810] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 10.810] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 10.810] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 10.810] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 10.810] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 10.810] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 10.810] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 10.810] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 10.810] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 10.810] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 10.810] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 10.810] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 10.810] (II) intel(0): EDID vendor "ONK", prod id 3953 [ 10.810] (--) intel(0): HDMI max TMDS frequency 225000KHz [ 10.810] (II) intel(0): Printing probed modes for output DP1 [ 10.810] (II) intel(0): Modeline "1920x1080_50"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz UP) [ 10.810] (II) intel(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz eP) [ 10.810] (II) intel(0): Modeline "1920x1080_60"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) [ 10.810] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 10.810] (II) intel(0): Modeline "1920x1080_24"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz) [ 10.810] (II) intel(0): Modeline "1920x1080_25"x50.0 74.25 1920 2448 2492 2640 1080 1082 1089 1125 interlace +hsync +vsync (28.1 kHz) [ 10.810] (II) intel(0): Modeline "1920x1080_30"x60.0 74.25 1920 2008 2052 2200 1080 1082 1087 1125 interlace +hsync +vsync (33.8 kHz) [ 10.810] (II) intel(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 10.810] (II) intel(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 10.810] (II) intel(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 10.811] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 10.811] (II) intel(0): Modeline "1360x768_60"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) [ 10.811] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e) [ 10.811] (II) intel(0): Modeline "1280x768_60"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz) [ 10.811] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 10.811] (II) intel(0): Modeline "1280x720_50"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz) [ 10.811] (II) intel(0): Modeline "1280x720_60"x60.0 74.25 1280 1390 1420 1650 720 725 730 750 +hsync +vsync (45.0 kHz) [ 10.811] (II) intel(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 10.811] (II) intel(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 10.811] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 10.811] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 10.811] (II) intel(0): Modeline "720x576_50"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz) [ 10.811] (II) intel(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 10.811] (II) intel(0): Modeline "720x480_60"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz) [ 10.811] (II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 10.811] (II) intel(0): Modeline "640x480_60"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 10.811] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 10.811] (II) intel(0): EDID for output VIRTUAL1 [ 10.811] (II) intel(0): Output DP1 connected [ 10.811] (II) intel(0): Output VIRTUAL1 disconnected [ 10.811] (II) intel(0): Using user preference for initial modes [ 10.811] (II) intel(0): Output DP1 using initial mode 1920x1080_50 +0+0 [ 10.811] (**) intel(0): TearFree enabled [ 10.811] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) [ 10.811] (**) intel(0): Display dimensions: (1110, 620) mm [ 10.811] (**) intel(0): DPI set to (43, 44) [ 10.811] (II) Loading sub module "dri3" [ 10.811] (II) LoadModule: "dri3" [ 10.811] (II) Module "dri3" already built-in [ 10.811] (II) Loading sub module "dri2" [ 10.811] (II) LoadModule: "dri2" [ 10.811] (II) Module "dri2" already built-in [ 10.811] (II) Loading sub module "present" [ 10.811] (II) LoadModule: "present" [ 10.811] (II) Module "present" already built-in [ 10.811] (==) Depth 24 pixmap format is 32 bpp [ 10.813] (II) intel(0): SNA initialized with disabled backend [ 10.813] (==) intel(0): Backing store enabled [ 10.813] (==) intel(0): Silken mouse enabled [ 10.813] (II) intel(0): HW Cursor enabled [ 10.813] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 10.814] (==) intel(0): DPMS enabled [ 10.814] (==) intel(0): Display hotplug detection enabled [ 10.814] (II) intel(0): Textured video not supported on this hardware or backend [ 10.815] (WW) intel(0): loading DRI2 whilst acceleration is disabled. [ 10.815] (II) intel(0): [DRI2] Setup complete [ 10.815] (II) intel(0): [DRI2] DRI driver: i965 [ 10.815] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 10.815] (II) intel(0): direct rendering: DRI2 enabled [ 10.815] (II) intel(0): hardware support for Present enabled [ 10.815] (WW) intel(0): Option "UseEDID" is not used [ 10.815] (--) RandR disabled [ 10.818] (II) SELinux: Disabled on system [ 10.846] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 10.846] (II) AIGLX: enabled GLX_ARB_create_context [ 10.846] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 10.846] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 10.846] (II) AIGLX: enabled GLX_INTEL_swap_event [ 10.846] (II) AIGLX: enabled GLX_SGI_swap_control [ 10.846] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 10.846] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 10.846] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 10.846] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 10.846] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 10.847] (II) AIGLX: Loaded and initialized i965 [ 10.847] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 10.849] (II) intel(0): switch to mode 1920x1080@50.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 10.859] (II) intel(0): Setting screen physical size to 508 x 285 [ 10.899] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 10.899] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 10.899] (**) Power Button: Applying InputClass "system-keyboard" [ 10.899] (II) LoadModule: "libinput" [ 10.899] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 10.905] (II) Module libinput: vendor="X.Org Foundation" [ 10.905] compiled for 1.19.6, module version = 0.27.1 [ 10.905] Module class: X.Org XInput Driver [ 10.905] ABI class: X.Org XInput driver, version 24.1 [ 10.905] (II) Using input driver 'libinput' for 'Power Button' [ 10.905] (**) Power Button: always reports core events [ 10.905] (**) Option "Device" "/dev/input/event2" [ 10.905] (**) Option "_source" "server/udev" [ 10.905] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 10.905] (II) event2 - Power Button: device is a keyboard [ 10.905] (II) event2 - Power Button: device removed [ 10.928] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 10.928] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 10.928] (**) Option "xkb_model" "pc105" [ 10.928] (**) Option "xkb_layout" "de" [ 10.928] (**) Option "xkb_variant" ",nodeadkeys" [ 10.928] (WW) Option "xkb_options" requires a string value [ 10.954] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 10.954] (II) event2 - Power Button: device is a keyboard [ 10.954] (II) config/udev: Adding input device Video Bus (/dev/input/event3) [ 10.954] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 10.954] (**) Video Bus: Applying InputClass "system-keyboard" [ 10.954] (II) Using input driver 'libinput' for 'Video Bus' [ 10.954] (**) Video Bus: always reports core events [ 10.954] (**) Option "Device" "/dev/input/event3" [ 10.954] (**) Option "_source" "server/udev" [ 10.955] (II) event3 - Video Bus: is tagged by udev as: Keyboard [ 10.955] (II) event3 - Video Bus: device is a keyboard [ 10.955] (II) event3 - Video Bus: device removed [ 10.996] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3" [ 10.996] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 10.996] (**) Option "xkb_model" "pc105" [ 10.996] (**) Option "xkb_layout" "de" [ 10.996] (**) Option "xkb_variant" ",nodeadkeys" [ 10.996] (WW) Option "xkb_options" requires a string value [ 10.997] (II) event3 - Video Bus: is tagged by udev as: Keyboard [ 10.997] (II) event3 - Video Bus: device is a keyboard [ 10.997] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 10.997] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 10.997] (**) Power Button: Applying InputClass "system-keyboard" [ 10.997] (II) Using input driver 'libinput' for 'Power Button' [ 10.997] (**) Power Button: always reports core events [ 10.997] (**) Option "Device" "/dev/input/event1" [ 10.997] (**) Option "_source" "server/udev" [ 10.998] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 10.998] (II) event1 - Power Button: device is a keyboard [ 10.998] (II) event1 - Power Button: device removed [ 11.012] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 11.012] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 11.012] (**) Option "xkb_model" "pc105" [ 11.012] (**) Option "xkb_layout" "de" [ 11.012] (**) Option "xkb_variant" ",nodeadkeys" [ 11.012] (WW) Option "xkb_options" requires a string value [ 11.013] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 11.013] (II) event1 - Power Button: device is a keyboard [ 11.013] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 11.013] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 11.013] (**) Sleep Button: Applying InputClass "system-keyboard" [ 11.013] (II) Using input driver 'libinput' for 'Sleep Button' [ 11.013] (**) Sleep Button: always reports core events [ 11.013] (**) Option "Device" "/dev/input/event0" [ 11.013] (**) Option "_source" "server/udev" [ 11.014] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 11.014] (II) event0 - Sleep Button: device is a keyboard [ 11.014] (II) event0 - Sleep Button: device removed [ 11.028] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 11.028] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 11.028] (**) Option "xkb_model" "pc105" [ 11.028] (**) Option "xkb_layout" "de" [ 11.028] (**) Option "xkb_variant" ",nodeadkeys" [ 11.028] (WW) Option "xkb_options" requires a string value [ 11.029] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 11.029] (II) event0 - Sleep Button: device is a keyboard [ 11.030] (II) config/udev: Adding input device flirc.tv flirc Keyboard (/dev/input/event4) [ 11.030] (**) flirc.tv flirc Keyboard: Applying InputClass "libinput keyboard catchall" [ 11.030] (**) flirc.tv flirc Keyboard: Applying InputClass "system-keyboard" [ 11.030] (II) Using input driver 'libinput' for 'flirc.tv flirc Keyboard' [ 11.030] (**) flirc.tv flirc Keyboard: always reports core events [ 11.030] (**) Option "Device" "/dev/input/event4" [ 11.030] (**) Option "_source" "server/udev" [ 11.031] (II) event4 - flirc.tv flirc Keyboard: is tagged by udev as: Keyboard [ 11.031] (II) event4 - flirc.tv flirc Keyboard: device is a keyboard [ 11.031] (II) event4 - flirc.tv flirc Keyboard: device removed [ 11.060] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:20A0:0001.0001/input/input4/event4" [ 11.060] (II) XINPUT: Adding extended input device "flirc.tv flirc Keyboard" (type: KEYBOARD, id 10) [ 11.060] (**) Option "xkb_model" "pc105" [ 11.060] (**) Option "xkb_layout" "de" [ 11.060] (**) Option "xkb_variant" ",nodeadkeys" [ 11.060] (WW) Option "xkb_options" requires a string value [ 11.061] (II) event4 - flirc.tv flirc Keyboard: is tagged by udev as: Keyboard [ 11.061] (II) event4 - flirc.tv flirc Keyboard: device is a keyboard [ 11.062] (II) config/udev: Adding input device flirc.tv flirc Consumer Control (/dev/input/event5) [ 11.062] (**) flirc.tv flirc Consumer Control: Applying InputClass "libinput keyboard catchall" [ 11.062] (**) flirc.tv flirc Consumer Control: Applying InputClass "system-keyboard" [ 11.062] (II) Using input driver 'libinput' for 'flirc.tv flirc Consumer Control' [ 11.062] (**) flirc.tv flirc Consumer Control: always reports core events [ 11.062] (**) Option "Device" "/dev/input/event5" [ 11.062] (**) Option "_source" "server/udev" [ 11.062] (II) event5 - flirc.tv flirc Consumer Control: is tagged by udev as: Keyboard [ 11.062] (II) event5 - flirc.tv flirc Consumer Control: device is a keyboard [ 11.062] (II) event5 - flirc.tv flirc Consumer Control: device removed [ 11.076] (II) libinput: flirc.tv flirc Consumer Control: needs a virtual subdevice [ 11.076] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:20A0:0001.0001/input/input5/event5" [ 11.076] (II) XINPUT: Adding extended input device "flirc.tv flirc Consumer Control" (type: MOUSE, id 11) [ 11.076] (**) Option "AccelerationScheme" "none" [ 11.076] (**) flirc.tv flirc Consumer Control: (accel) selected scheme none/0 [ 11.076] (**) flirc.tv flirc Consumer Control: (accel) acceleration factor: 2.000 [ 11.076] (**) flirc.tv flirc Consumer Control: (accel) acceleration threshold: 4 [ 11.077] (II) event5 - flirc.tv flirc Consumer Control: is tagged by udev as: Keyboard [ 11.077] (II) event5 - flirc.tv flirc Consumer Control: device is a keyboard [ 11.078] (II) config/udev: Adding input device flirc.tv flirc System Control (/dev/input/event6) [ 11.078] (**) flirc.tv flirc System Control: Applying InputClass "libinput keyboard catchall" [ 11.078] (**) flirc.tv flirc System Control: Applying InputClass "system-keyboard" [ 11.078] (II) Using input driver 'libinput' for 'flirc.tv flirc System Control' [ 11.078] (**) flirc.tv flirc System Control: always reports core events [ 11.078] (**) Option "Device" "/dev/input/event6" [ 11.078] (**) Option "_source" "server/udev" [ 11.078] (II) event6 - flirc.tv flirc System Control: is tagged by udev as: Keyboard [ 11.078] (II) event6 - flirc.tv flirc System Control: device is a keyboard [ 11.078] (II) event6 - flirc.tv flirc System Control: device removed [ 11.092] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:20A0:0001.0001/input/input6/event6" [ 11.092] (II) XINPUT: Adding extended input device "flirc.tv flirc System Control" (type: KEYBOARD, id 12) [ 11.092] (**) Option "xkb_model" "pc105" [ 11.092] (**) Option "xkb_layout" "de" [ 11.092] (**) Option "xkb_variant" ",nodeadkeys" [ 11.092] (WW) Option "xkb_options" requires a string value [ 11.093] (II) event6 - flirc.tv flirc System Control: is tagged by udev as: Keyboard [ 11.093] (II) event6 - flirc.tv flirc System Control: device is a keyboard [ 11.093] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event10) [ 11.093] (II) No input driver specified, ignoring this device. [ 11.093] (II) This device may have been added with another device file. [ 11.094] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event11) [ 11.094] (II) No input driver specified, ignoring this device. [ 11.094] (II) This device may have been added with another device file. [ 11.094] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event12) [ 11.094] (II) No input driver specified, ignoring this device. [ 11.094] (II) This device may have been added with another device file. [ 11.095] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event13) [ 11.095] (II) No input driver specified, ignoring this device. [ 11.095] (II) This device may have been added with another device file. [ 11.095] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7) [ 11.095] (II) No input driver specified, ignoring this device. [ 11.095] (II) This device may have been added with another device file. [ 11.095] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8) [ 11.095] (II) No input driver specified, ignoring this device. [ 11.095] (II) This device may have been added with another device file. [ 11.096] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9) [ 11.096] (II) No input driver specified, ignoring this device. [ 11.096] (II) This device may have been added with another device file. [ 11.120] (**) flirc.tv flirc Consumer Control: Applying InputClass "libinput keyboard catchall" [ 11.120] (**) flirc.tv flirc Consumer Control: Applying InputClass "system-keyboard" [ 11.120] (II) Using input driver 'libinput' for 'flirc.tv flirc Consumer Control' [ 11.120] (**) flirc.tv flirc Consumer Control: always reports core events [ 11.120] (**) Option "Device" "/dev/input/event5" [ 11.120] (**) Option "_source" "_driver/libinput" [ 11.120] (II) libinput: flirc.tv flirc Consumer Control: is a virtual subdevice [ 11.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:20A0:0001.0001/input/input5/event5" [ 11.120] (II) XINPUT: Adding extended input device "flirc.tv flirc Consumer Control" (type: KEYBOARD, id 13) [ 11.120] (**) Option "xkb_model" "pc105" [ 11.120] (**) Option "xkb_layout" "de" [ 11.120] (**) Option "xkb_variant" ",nodeadkeys" [ 11.120] (WW) Option "xkb_options" requires a string value