# Please make this file available to others # by sending it to # # this config file was automatically generated # using lirc-0.8.6(default) on Sat Feb 27 20:24:41 2010 # # contributed by M. Hippert # # brand: Atric # model no. of remote control: ONE for ALL URC 7960 SmartControl # devices being controlled by this remote: Code for stb: Technisat: 1195 # # press and hold the magic-Key for 3 sec -> blue ring will light up 2x # select "stb" # enter code "1195" -> blue ring will light up 2x # # The keys PREVIEW, NEXT and "pop up X" failed # The keys with same code: # Red & Rewind; # Green & Stop; # Yellow & Pause & Play; # Blue & FastForward & 19:6; # -/-- & list; # back & Key-between-ChannelUp-and-ChannelDown # # Change Code for these keys: # * Press and hold the magic key for 3 sec. --> The Blue ring will light up 2x # * Press 9 9 4. --> The Blue ring will light up 2x # * Press and release the magic key. # * Enter the 5-digit magic-code # * Press the to assign the key code to # (Repeat all for the next key) # # # *** Magic-Code *** # Next 00240 # Preview 00627 # pop up X 00723 # Rewind 00560 # Stop 00243 # Pause 00720 # Play 00339 # FastForward 00563 # 16:9 00274 # list 00264 ### back & Key-between-ChannelUp-and-ChannelDown ------> not changed # Key-between-ChannelUp-and-ChannelDown 00658 # code for stb: 1195 # How to reset a device mode to its original mode? # 1) Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit. # 2) Press 9 9 2. # 3) Select the corresponding device mode you wish to reset to its original mode # (e.g. select sat). # 4) Press the MAGIC key twice. The blue LED will blink twice. begin remote name URC_7960 bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 900 868 zero 900 868 plead 909 gap 113659 toggle_bit_mask 0x800 begin codes KEY_POWER2 0x120c KEY_SETUP 0x123f # 16:9 -> Setupmenü KEY_BACK 0x1232 # |< KEY_STOP 0x1236 KEY_NEXT 0x122e # >| KEY_REWIND 0x122c # << KEY_PLAY 0x1235 KEY_FASTFORWARD 0x1234 # >> KEY_CHANNEL 0x022f # list -> Kanäle KEY_PAUSE 0x1229 KEY_RECORD 0x1237 KEY_VOLUMEUP 0x1210 KEY_MUTE 0x120d KEY_VOLUMEDOWN 0x1211 KEY_UP 0x0210 KEY_DOWN 0x0211 KEY_LEFT 0x0215 KEY_RIGHT 0x0216 KEY_OK 0x0217 KEY_CHANNELUP 0x1220 KEY_ESC 0x123b KEY_CHANNELDOWN 0x1221 KEY_RED 0x022b KEY_GREEN 0x022c KEY_YELLOW 0x022d KEY_BLUE 0x022e KEY_INFO 0x020f KEY_MENU 0x0212 KEY_EPG 0x122f # Guide KEY_TEXT 0x123c # Mce KEY_FAVORITES 0x1231 # Pop Up X KEY_PREVIOUS 0x1222 # BACK - vorheriger Channel KEY_1 0x1201 KEY_2 0x1202 KEY_3 0x1203 KEY_4 0x1204 KEY_5 0x1205 KEY_6 0x1206 KEY_7 0x1207 KEY_8 0x1208 KEY_9 0x1209 KEY_TIME 0x120a # -/-- KEY_0 0x1200 KEY_PVR 0x0200 # av -> Aufnahmen end codes end remote #YaUSBir Frontpanel begin remote name yaUsbIR_frontswitch bits 5 flags RC5 eps 30 aeps 100 one 884 884 zero 884 884 plead 884 pre_data_bits 8 pre_data 0xF8 gap 100000 min_repeat 2 # suppress_repeat 2 # uncomment to suppress unwanted repeats begin codes KEY_F1 0x00 KEY_F2 0x01 KEY_F3 0x02 KEY_F4 0x03 KEY_F5 0x04 KEY_F6 0x05 KEY_F7 0x06 KEY_F8 0x07 KEY_F9 0x08 KEY_F10 0x09 KEY_F11 0x0A KEY_F12 0x0B KEY_F13 0x0C KEY_F14 0x0D KEY_F15 0x0E KEY_F16 0x0F IN_1_L 0x10 IN_1_H 0x11 IN_2_L 0x12 IN_2_H 0x13 IN_3_L 0x14 IN_3_H 0x15 IN_4_L 0x16 IN_4_H 0x17 IN_5_L 0x18 IN_5_H 0x19 IN_6_L 0x1A IN_6_H 0x1B IN_7_L 0x1C IN_7_H 0x1D IN_8_L 0x1E IN_8_H 0x1F end codes end remote begin remote name yaUsbIR_control flags RAW_CODES|CONST_LENGTH eps 1 aeps 1 ptrail 0 repeat 0 0 gap 31000 begin raw_codes name 0 29952 name 1 29965 name 2 29978 name 3 29991 name 4 30004 name 5 30017 name 6 30030 name 7 30043 name 8 30056 name 9 30069 name 10 30082 name 11 30095 name 12 30108 name 13 30121 name 14 30134 name 15 30147 name 16 30160 name C_END 30173 name C_WATCHDOG 30186 name C_OUTPUT 30199 name C_INPUT 30212 name C_IR 30225 end raw_codes end remote