# Please make this file available to others # by sending it to # # this config file was automatically generated # using lirc-0.8.7-CVS(default) on Wed Nov 3 20:25:36 2010 # # contributed by Gen2VDR. # modified by OliverH # # brand: /etc/lirc/lircd2.conf # brand: one for all 7960 # emulates:Microsoft XBOX 360 Universal Media Remote # # Tested with Lirc Receiver: Atric # model no. of remote control: ONE for ALL URC 7960 SmartControl # devices being controlled by this remote: Code for dvd: XBox: 1708 # # press and hold the magic-Key for 3 sec -> blue ring will light up 2x # select "dvd" # enter code "1708" -> blue ring will light up 2x # # The keys yellow, back (between Vol+ and Vol-), record; sharing events with other # # Change Code for this keys: # * Press and hold the magic key for 3 sec. --> The Blue ring will light up 2x # * Press 9 9 4. --> The Blue ring will light up 2x # * Press and release the magic key # * Enter the 5-digit magic-code # * Press key to assign the code to # * Repeat all for the next key # # back 00539 (the button between Ch+/ Ch-) # yellow 00568 # record 00378 # # Lirc sensitivity problems can be fixed with set to 250 # or by changing the gap value to a higher value in this lircd.conf begin remote # name /etc/lirc/lircd2.conf name Gen2VDR bits 13 flags RC6|CONST_LENGTH eps 30 aeps 100 header 2732 799 one 489 395 zero 489 395 pre_data_bits 24 pre_data 0x1BFF80 gap 125000 # gap 106588 toggle_bit_mask 0x8000 rc6_mask 0x100000000 begin codes power 0x0BF3 video 0x0BD7 prev 0x0BE4 next 0x0BE5 stop 0x0BE6 frew 0x0BEA play 0x0BE9 ffwd 0x0BEB list 0x0BAE pause 0x0BE7 rec 0x0BE8 up 0x0BE1 down 0x0BE0 left 0x0BDF right 0x0BDE ok 0x0BDD ch+ 0x0BED ch- 0x0BEC info 0x0BF0 menu 0x0BDB timers 0x0BD9 subtitles 0x0BF2 tv 0x0B9B exit 0x0BDC red 0x0BDA green 0x0B99 yellow 0x0BB0 blue 0x0B97 1 0x0BFE 2 0x0BFD 3 0x0BFC 4 0x0BFB 5 0x0BFA 6 0x0BF9 7 0x0BF8 8 0x0BF7 9 0x0BF6 0 0x0BFF + 0x0BE2 audio 0x0BE3 end codes end remote