# # this config file was automatically generated # using lirc-0.7.2-CVS(serial) on Sun Jun 5 11:44:32 2005 # # contributed by Wolfgang Rohdewald, wolfgang|rohdewald.de # # brand: Logitech # model no. of remote control: Harmony 655 # devices being controlled by this remote: # # You can ask Logitech service to copy the settings # from the account wolfgang61. This will make the # Harmony work with this conf file and especially # vdr (see http://www.vdrportal.de) # but of course you will have to adapt the Harmony # to the rest of your equipment. begin remote name Harmony_655 bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 935 836 zero 935 836 plead 969 gap 114064 min_repeat 1 toggle_bit 2 begin codes Up 0x1012 Down 0x1013 Menu 0x100E Ok 0x02c8 Back 0x100B Left 0x1015 Right 0x1014 Red 0x1037 Green 0x1036 Yellow 0x1032 Blue 0x1034 0 0x1000 1 0x1017 2 0x1002 3 0x1003 4 0x1004 5 0x1005 6 0x1006 7 0x1007 8 0x1008 9 0x1009 Channel+ 0x1020 Channel- 0x1021 Pause 0x1169 Play 0x1175 Stop 0x17F6 Record 0x17F7 FastFwd 0x1166 FastRew 0x1165 Go 0x17FC Full 0x17FB User1 0x17C1 User2 0x17C2 User3 0x17C3 User4 0x17C4 User5 0x17C5 User6 0x17C6 User7 0x17C7 User8 0x17C8 User9 0x17C9 Audio 0x17C0 end codes end remote