[ 0.000000] Linux version 2.6.22.15 (root@easyVDR) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #16 SMP PREEMPT Mon Mar 3 10:23:58 CET 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable) [ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f533000 (usable) [ 0.000000] BIOS-e820: 000000003f533000 - 000000003f53b000 (reserved) [ 0.000000] BIOS-e820: 000000003f53b000 - 000000003f5cb000 (usable) [ 0.000000] BIOS-e820: 000000003f5cb000 - 000000003f5cf000 (reserved) [ 0.000000] BIOS-e820: 000000003f5cf000 - 000000003f660000 (usable) [ 0.000000] BIOS-e820: 000000003f660000 - 000000003f6f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f6f0000 - 000000003f6f3000 (usable) [ 0.000000] BIOS-e820: 000000003f6f3000 - 000000003f6ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable) [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 0000000100000000 (reserved) [ 0.000000] 119MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000fe200 [ 0.000000] Entering add_active_range(0, 0, 259840) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 259840 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 259840 [ 0.000000] On node 0 totalpages: 259840 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 238 pages used for memmap [ 0.000000] HighMem zone: 30226 pages, LIFO batch:7 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL ) [ 0.000000] ACPI: RSDT 3F6FD038, 0038 (r1 INTEL D945GLF 67 1000013) [ 0.000000] ACPI: FACP 3F6FC000, 0074 (r1 INTEL D945GLF 67 MSFT 1000013) [ 0.000000] ACPI: DSDT 3F6F7000, 4787 (r1 INTEL D945GLF 67 MSFT 1000013) [ 0.000000] ACPI: FACS 3F6A3000, 0040 [ 0.000000] ACPI: APIC 3F6F6000, 0078 (r1 INTEL D945GLF 67 MSFT 1000013) [ 0.000000] ACPI: WDDT 3F6F5000, 0040 (r1 INTEL D945GLF 67 MSFT 1000013) [ 0.000000] ACPI: MCFG 3F6F4000, 003C (r1 INTEL D945GLF 67 MSFT 1000013) [ 0.000000] ACPI: ASF! 3F6F3000, 00A6 (r32 INTEL D945GLF 67 MSFT 1000013) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 7:12 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 7:12 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] Built 1 zonelists. Total pages: 257810 [ 0.000000] Kernel command line: root=/dev/sda3 ro pci=routeirq vga=788 [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1596.130 MHz processor. [ 16.696510] Console: colour dummy device 80x25 [ 16.697076] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 16.697949] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 16.731969] Memory: 1021048k/1039360k available (5331k kernel code, 16984k reserved, 1691k data, 388k init, 121184k highmem) [ 16.731997] virtual kernel memory layout: [ 16.731999] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 16.732001] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 16.732003] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 16.732006] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 16.732008] .init : 0xc07e3000 - 0xc0844000 ( 388 kB) [ 16.732010] .data : 0xc0634fe1 - 0xc07dbe9c (1691 kB) [ 16.732013] .text : 0xc0100000 - 0xc0634fe1 (5331 kB) [ 16.732044] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 16.732118] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 16.792090] Calibrating delay using timer specific routine.. 3194.08 BogoMIPS (lpj=1597042) [ 16.792159] Mount-cache hash table entries: 512 [ 16.792315] CPU: After generic identify, caps: bfe9fbff 20100000 00000000 00000000 0040e31d 00000000 00000001 [ 16.792331] monitor/mwait feature present. [ 16.792340] using mwait in idle threads. [ 16.792349] CPU: L1 I cache: 32K, L1 D cache: 24K [ 16.792357] CPU: L2 cache: 512K [ 16.792364] CPU: Physical Processor ID: 0 [ 16.792371] CPU: After all inits, caps: bfe9fbff 20100000 00000000 00003940 0040e31d 00000000 00000001 [ 16.792383] Intel machine check architecture supported. [ 16.792392] Intel machine check reporting enabled on CPU#0. [ 16.792405] Compat vDSO mapped to ffffe000. [ 16.792425] Checking 'hlt' instruction... OK. [ 16.796616] SMP alternatives: switching to UP code [ 16.797369] ACPI: Core revision 20070126 [ 16.801570] CPU0: Intel(R) Atom(TM) CPU 230 @ 1.60GHz stepping 02 [ 16.801602] SMP alternatives: switching to SMP code [ 16.801910] Booting processor 1/1 eip 3000 [ 16.812072] Initializing CPU#1 [ 16.872004] Calibrating delay using timer specific routine.. 3191.71 BogoMIPS (lpj=1595857) [ 16.872017] CPU: After generic identify, caps: bfe9fbff 20100000 00000000 00000000 0040e31d 00000000 00000001 [ 16.872028] monitor/mwait feature present. [ 16.872034] CPU: L1 I cache: 32K, L1 D cache: 24K [ 16.872038] CPU: L2 cache: 512K [ 16.872043] CPU: Physical Processor ID: 0 [ 16.872047] CPU: After all inits, caps: bfe9fbff 20100000 00000000 00003940 0040e31d 00000000 00000001 [ 16.872058] Intel machine check architecture supported. [ 16.872064] Intel machine check reporting enabled on CPU#1. [ 16.872306] CPU1: Intel(R) Atom(TM) CPU 230 @ 1.60GHz stepping 02 [ 16.872393] Total of 2 processors activated (6385.79 BogoMIPS). [ 16.872555] ENABLING IO-APIC IRQs [ 16.872781] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 16.984012] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 17.004020] Brought up 2 CPUs [ 17.084956] migration_cost=39 [ 17.085190] Booting paravirtualized kernel on bare hardware [ 17.085267] NET: Registered protocol family 16 [ 17.085392] No dock devices found. [ 17.085871] ACPI: bus type pci registered [ 17.085888] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support. [ 17.087833] PCI: Using configuration type 1 [ 17.087840] Setting up standard PCI resources [ 17.099834] ACPI: Interpreter enabled [ 17.099849] ACPI: (supports S0 S1 S3 S4 S5) [ 17.099887] ACPI: Using IOAPIC for interrupt routing [ 17.107925] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.107957] PCI: Probing PCI hardware (bus 00) [ 17.108523] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 17.108535] PCI quirk: region 0500-053f claimed by ICH6 GPIO [ 17.109367] PCI: Transparent bridge - 0000:00:1e.0 [ 17.109435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.110008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 17.110607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 17.110814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 17.111023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 17.116660] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 17.116856] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 17.117045] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 17.117225] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 17.117405] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12) [ 17.117584] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12) [ 17.117765] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) [ 17.117952] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12) [ 17.118127] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.118150] pnp: PnP ACPI init [ 17.118167] ACPI: bus type pnp registered [ 17.123118] pnp: PnP ACPI: found 12 devices [ 17.123130] ACPI: ACPI bus type pnp unregistered [ 17.123273] SCSI subsystem initialized [ 17.123344] libata version 2.21 loaded. [ 17.123457] usbcore: registered new interface driver usbfs [ 17.123528] usbcore: registered new interface driver hub [ 17.123601] usbcore: registered new device driver usb [ 17.123665] PCI: Using ACPI for IRQ routing [ 17.123676] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified [ 17.123696] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.123712] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 17 [ 17.123726] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 18 [ 17.123740] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 17.123757] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 20 [ 17.123778] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 [ 17.123791] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 17.123803] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 17.123815] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 [ 17.123827] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19 [ 17.123839] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 17.123851] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20 [ 17.123864] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.123882] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low) -> IRQ 22 [ 17.123896] ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 20 (level, low) -> IRQ 23 [ 17.123908] ACPI: PCI Interrupt 0000:04:08.2[A] -> GSI 20 (level, low) -> IRQ 23 [ 17.123920] ACPI: PCI Interrupt 0000:04:08.4[A] -> GSI 20 (level, low) -> IRQ 23 [ 17.124105] pnp: 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 17.124119] pnp: 00:01: iomem range 0xfed13000-0xfed13fff could not be reserved [ 17.124131] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 17.124142] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 17.124161] pnp: 00:06: ioport range 0x500-0x53f has been reserved [ 17.124169] pnp: 00:06: ioport range 0x400-0x47f has been reserved [ 17.124178] pnp: 00:06: ioport range 0x680-0x6ff has been reserved [ 17.124753] Time: tsc clocksource has been installed. [ 17.154647] PCI: Bridge: 0000:00:1c.0 [ 17.154656] IO window: 1000-1fff [ 17.154666] MEM window: 53200000-532fffff [ 17.154676] PREFETCH window: 53100000-531fffff [ 17.154685] PCI: Bridge: 0000:00:1c.2 [ 17.154691] IO window: disabled. [ 17.154699] MEM window: disabled. [ 17.154707] PREFETCH window: disabled. [ 17.154716] PCI: Bridge: 0000:00:1c.3 [ 17.154723] IO window: disabled. [ 17.154731] MEM window: disabled. [ 17.154739] PREFETCH window: disabled. [ 17.154749] PCI: Bridge: 0000:00:1e.0 [ 17.154754] IO window: disabled. [ 17.154764] MEM window: 50000000-530fffff [ 17.154772] PREFETCH window: disabled. [ 17.154804] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 18 [ 17.154819] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 17.154839] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 17.154856] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 17.154876] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 20 [ 17.154889] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 17.154902] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 17.154923] NET: Registered protocol family 2 [ 17.166869] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 17.166988] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 17.168810] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 17.169534] TCP: Hash tables configured (established 131072 bind 65536) [ 17.169546] TCP reno registered [ 17.172889] IA-32 Microcode Update Driver: v1.14a [ 17.173275] highmem bounce pool size: 64 pages [ 17.173287] Total HugeTLB memory allocated, 0 [ 17.178162] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 17.178763] NTFS driver 2.1.28 [Flags: R/W]. [ 17.179168] fuse init (API version 7.8) [ 17.179657] JFS: nTxBlock = 7978, nTxLock = 63828 [ 17.184387] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 17.185904] SGI XFS Quota Management subsystem [ 17.185948] io scheduler noop registered [ 17.185955] io scheduler anticipatory registered [ 17.185962] io scheduler deadline registered [ 17.186059] io scheduler cfq registered (default) [ 17.186083] Boot video device is 0000:00:02.0 [ 17.186388] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 17.186432] assign_interrupt_mode Found MSI capability [ 17.186480] Allocate Port Service[0000:00:1c.0:pcie00] [ 17.186540] Allocate Port Service[0000:00:1c.0:pcie02] [ 17.186654] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 17.186700] assign_interrupt_mode Found MSI capability [ 17.186743] Allocate Port Service[0000:00:1c.2:pcie00] [ 17.186800] Allocate Port Service[0000:00:1c.2:pcie02] [ 17.186916] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 17.186960] assign_interrupt_mode Found MSI capability [ 17.187002] Allocate Port Service[0000:00:1c.3:pcie00] [ 17.187058] Allocate Port Service[0000:00:1c.3:pcie02] [ 17.187464] vesafb: framebuffer at 0x40000000, mapped to 0xf8d00000, using 3750k, total 7872k [ 17.187479] vesafb: mode is 800x600x16, linelength=1600, pages=7 [ 17.187487] vesafb: protected mode interface info at 00ff:44f0 [ 17.187494] vesafb: scrolling: redraw [ 17.187501] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 17.201123] Console: switching to colour frame buffer device 100x37 [ 17.213313] fb0: VESA VGA frame buffer device [ 17.213798] input: Power Button (FF) as /class/input/input0 [ 17.214037] ACPI: Power Button (FF) [PWRF] [ 17.214308] input: Sleep Button (CM) as /class/input/input1 [ 17.214549] ACPI: Sleep Button (CM) [SLPB] [ 17.215069] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 17.221107] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 17.235060] isapnp: Scanning for PnP cards... [ 17.552971] isapnp: No Plug & Play device found [ 17.606877] Real Time Clock Driver v1.12ac [ 17.612855] Non-volatile memory driver v1.2 [ 17.618731] nsc_gpio initializing [ 17.631298] FDC 0 is a post-1991 82077 [ 17.638854] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize [ 17.645323] loop: module loaded [ 17.651493] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 17.657475] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 17.658174] Switched to high resolution mode on CPU 0 [ 17.669896] Switched to high resolution mode on CPU 1 [ 17.676128] ICH7: IDE controller at PCI slot 0000:00:1f.1 [ 17.682403] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19 [ 17.688848] ICH7: chipset revision 1 [ 17.695326] ICH7: not 100% native mode: will probe irqs later [ 17.702050] ide0: BM-DMA at 0x2090-0x2097, BIOS settings: hda:pio, hdb:DMA [ 17.708881] Probing IDE interface ide0... [ 18.634860] hdb: HL-DT-STDVD-RAM GSA-H55N, ATAPI CD/DVD-ROM drive [ 18.691849] hdb: selected mode 0x44 [ 18.692122] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 18.702527] Probing IDE interface ide1... [ 19.215938] hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) [ 19.222920] Uniform CD-ROM driver Revision: 3.20 [ 19.232829] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 19.239759] Detecting Adaptec I2O RAID controllers... [ 19.246858] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 19.254027] scsi: Detection failed (no card) [ 19.300080] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 19.307186] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 19.314372] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007 [ 19.321559] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 19.328694] GDT-HA: Found 0 PCI Storage RAID Controllers [ 19.335636] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 19.342494] 3ware 9000 Storage Controller device driver for Linux v2.26.02.009. [ 19.349278] RocketRAID 3xxx SATA Controller driver v1.0 (060426) [ 19.356089] stex: Promise SuperTrak EX Driver version: 3.6.0000.1 [ 19.363308] ata_piix 0000:00:1f.2: version 2.11 [ 19.363317] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 19.370261] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 19.377382] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 19.377501] scsi0 : ata_piix [ 19.384614] scsi1 : ata_piix [ 19.391468] ata1: SATA max UDMA/133 cmd 0x000120a8 ctl 0x000120ce bmdma 0x00012080 irq 20 [ 19.398494] ata2: SATA max UDMA/133 cmd 0x000120a0 ctl 0x000120ca bmdma 0x00012088 irq 20 [ 19.575299] ata1.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7 [ 19.582057] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 19.608272] ata1.00: configured for UDMA/133 [ 19.776768] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 19.784120] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) [ 19.791157] sd 0:0:0:0: [sda] Write Protect is off [ 19.798023] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 19.798065] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.811998] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) [ 19.819089] sd 0:0:0:0: [sda] Write Protect is off [ 19.826040] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 19.826085] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.839920] sda: sda1 sda2 sda3 sda4 [ 19.856619] sd 0:0:0:0: [sda] Attached SCSI disk [ 19.863612] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 19.873723] I2O subsystem v1.325 [ 19.880372] i2o: max drivers = 8 [ 19.887042] I2O Configuration OSM v1.323 [ 19.893661] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 [ 19.900274] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 19.900281] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 19.906902] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 19.913602] ehci_hcd 0000:00:1d.7: debug port 1 [ 19.920072] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 19.920090] ehci_hcd 0000:00:1d.7: irq 21, io mem 0x533c4000 [ 19.935739] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 19.942326] usb usb1: configuration #1 chosen from 1 choice [ 19.948735] hub 1-0:1.0: USB hub found [ 19.954958] hub 1-0:1.0: 8 ports detected [ 20.061838] 116x: driver isp116x-hcd, 03 Nov 2005 [ 20.067901] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 20.067996] USB Universal Host Controller Interface driver v3.0 [ 20.074363] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 [ 20.080654] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 20.080660] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 20.087125] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 20.093533] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002060 [ 20.100028] usb usb2: configuration #1 chosen from 1 choice [ 20.106361] hub 2-0:1.0: USB hub found [ 20.112484] hub 2-0:1.0: 2 ports detected [ 20.218718] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 20.224885] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 20.224892] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 20.231054] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 20.237112] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00002040 [ 20.243206] usb usb3: configuration #1 chosen from 1 choice [ 20.249148] hub 3-0:1.0: USB hub found [ 20.254912] hub 3-0:1.0: 2 ports detected [ 20.267509] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 20.360603] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 20.366495] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 20.366502] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 20.372488] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 20.378521] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020 [ 20.384791] usb usb4: configuration #1 chosen from 1 choice [ 20.390956] hub 4-0:1.0: USB hub found [ 20.396915] hub 4-0:1.0: 2 ports detected [ 20.403888] usb 1-4: configuration #1 chosen from 1 choice [ 20.503522] sl811: driver sl811-hcd, 19 May 2005 [ 20.509382] Initializing USB Mass Storage driver... [ 20.515328] usbcore: registered new interface driver usb-storage [ 20.521268] USB Mass Storage support registered. [ 20.527155] usbcore: registered new interface driver libusual [ 20.533158] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 20.539186] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 20.548080] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 20.554082] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 20.560023] mice: PS/2 mouse device common for all mice [ 20.592458] input: AT Translated Set 2 keyboard as /class/input/input2 [ 20.845724] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 20.851771] TCP cubic registered [ 20.857648] NET: Registered protocol family 1 [ 20.863483] NET: Registered protocol family 17 [ 20.869540] Starting balanced_irq [ 20.875198] Using IPI No-Shortcut mode [ 20.894226] kjournald starting. Commit interval 5 seconds [ 20.894245] EXT3-fs: mounted filesystem with ordered data mode. [ 20.894264] VFS: Mounted root (ext3 filesystem) readonly. [ 20.894549] Freeing unused kernel memory: 388k freed [ 23.604511] Linux agpgart interface v0.102 (c) Dave Jones [ 23.698230] agpgart: Detected an Intel 945G Chipset. [ 23.698424] agpgart: Detected 7932K stolen memory. [ 23.740895] agpgart: AGP aperture is 256M @ 0x40000000 [ 23.740934] r8101 Fast Ethernet driver 1.006.00-NAPI loaded [ 23.740973] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.741007] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 23.741176] eth0: Identified chip type is 'RTL8102E'. [ 23.741186] eth0: RTL8101E at 0xf8ce4000, 00:1c:c0:32:a9:d1, IRQ 16 [ 23.838780] iTCO_vendor_support: vendor-support=0 [ 23.844995] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 23.845106] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 23.845168] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 24.276185] input: PC Speaker as /class/input/input3 [ 24.305069] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20 [ 24.306497] intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or [ 24.306503] don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if [ 24.306509] you are certain that your <4>intel_rng: system has a functional [ 24.306513] RNG, try<4>intel_rng: using the 'no_fwh_detect' option. [ 24.390062] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 17 [ 24.390102] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 24.406684] dvb-usb: found a 'Pinnacle 450e DVB-S USB2.0' in cold state, will try to load a firmware [ 24.557226] parport_pc 00:08: reported by Plug and Play ACPI [ 24.557289] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 24.659942] dvb-usb: downloading firmware from file 'dvb-usb-pctv-400e-01.fw' [ 24.718558] usbcore: registered new interface driver dvb_usb_ttusb2 [ 24.719299] usb 1-4: USB disconnect, address 2 [ 24.720386] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. [ 25.247464] hdb: selected mode 0x44 [ 25.302583] Adding 265032k swap on /dev/sda1. Priority:-1 extents:1 across:265032k [ 26.446157] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 26.560930] usb 1-4: configuration #1 chosen from 1 choice [ 26.561206] dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in warm state. [ 26.561944] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 26.562153] DVB: registering new adapter (Pinnacle 400e DVB-S USB2.0) [ 26.623206] DVB: registering frontend 0 (Philips TDA10086 DVB-S)... [ 26.776940] dvb-usb: Pinnacle 400e DVB-S USB2.0 successfully initialized and connected. [ 29.908874] Linux video capture interface: v2.00 [ 29.924845] saa7146: register extension 'dvb'. [ 29.924939] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low) -> IRQ 22 [ 29.924989] saa7146: found saa7146 @ mem f90c0000 (revision 1, irq 22) (0x13c2,0x0000). [ 29.973538] DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C) [ 29.991568] adapter has MAC addr = 00:d0:5c:03:a1:f9 [ 30.950030] dvb-ttpci: info @ card 1: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623 [ 30.950037] dvb-ttpci: firmware @ card 1 supports CI link layer interface [ 30.967099] dvb-ttpci: Crystal audio DAC @ card 1 detected [ 30.968003] saa7146_vv: saa7146 (0): registered device video0 [v4l2] [ 30.968046] saa7146_vv: saa7146 (0): registered device vbi0 [v4l2] [ 31.277894] DVB: registering frontend 1 (ST STV0299 DVB-S)... [ 31.278108] input: DVB on-card IR receiver as /class/input/input4 [ 31.278165] dvb-ttpci: found av7110-0. [ 31.349799] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 31.350009] cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected] [ 31.350017] cx88[0]: TV tuner type 4, Radio tuner type -1 [ 31.501353] tveeprom 3-0050: Hauppauge model 90002, rev C176, serial# 55408 [ 31.501362] tveeprom 3-0050: MAC address is 00-0D-FE-00-D8-70 [ 31.501367] tveeprom 3-0050: tuner model is Thompson DTT7592 (idx 76, type 4) [ 31.501373] tveeprom 3-0050: TV standards ATSC/DVB Digital (eeprom 0x80) [ 31.501378] tveeprom 3-0050: audio processor is None (idx 0) [ 31.501383] tveeprom 3-0050: decoder processor is CX882 (idx 25) [ 31.501387] tveeprom 3-0050: has no radio, has IR receiver, has no IR transmitter [ 31.501392] cx88[0]: hauppauge eeprom: model=90002 [ 31.501504] input: cx88 IR (Hauppauge Nova-T DVB-T as /class/input/input5 [ 31.501575] cx88[0]/2: cx2388x 8802 Driver Manager [ 31.501604] ACPI: PCI Interrupt 0000:04:08.2[A] -> GSI 20 (level, low) -> IRQ 23 [ 31.501621] cx88[0]/2: found at 0000:04:08.2, rev: 5, irq: 23, latency: 32, mmio: 0x51000000 [ 31.529791] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 31.529800] cx88/2: registering cx8802 driver, type: dvb access: shared [ 31.529809] cx88[0]/2: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18] [ 31.529816] cx88[0]/2: cx2388x based DVB/ATSC card [ 31.635646] DVB: registering new adapter (cx88[0]) [ 31.635657] DVB: registering frontend 2 (Conexant CX22702 DVB-T)... [ 31.864012] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 31.864122] ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 20 (level, low) -> IRQ 23 [ 31.864142] cx88[0]/0: found at 0000:04:08.0, rev: 5, irq: 23, latency: 32, mmio: 0x52000000 [ 31.864213] cx88[0]/0: registered device video1 [v4l2] [ 31.864259] cx88[0]/0: registered device vbi1 [ 31.874695] cx2388x blackbird driver version 0.0.6 loaded [ 31.874704] cx88/2: registering cx8802 driver, type: blackbird access: shared [ 31.874714] cx88[0]/2: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18] [ 31.874721] cx88[0]/2: cx8802 probe failed, err = -19 [ 32.268111] dvbloop: no version for "struct_module" found: kernel tainted. [ 32.270577] dvblo: dvblo_chardev_init(): initializing char device with minor device number 0 [ 32.270615] dvblo: dvblo_chardev_init(): added character device dvblo0 [ 32.270622] dvblo: dvblo_chardev_init(): initializing char device with minor device number 1 [ 32.270651] dvblo: dvblo_chardev_init(): added character device dvblo1 [ 32.270658] dvblo: dvblo_chardev_init(): initializing char device with minor device number 2 [ 32.270692] dvblo: dvblo_chardev_init(): added character device dvblo2 [ 32.270699] dvblo: dvblo_chardev_init(): initializing char device with minor device number 3 [ 32.270726] dvblo: dvblo_chardev_init(): added character device dvblo3 [ 32.270733] dvblo: dvblo_chardev_init(): initializing char device with minor device number 4 [ 32.270766] dvblo: dvblo_chardev_init(): added character device dvblo4 [ 32.270773] dvblo: dvblo_chardev_init(): initializing char device with minor device number 5 [ 32.270807] dvblo: dvblo_chardev_init(): added character device dvblo5 [ 32.270815] dvblo: dvblo_chardev_init(): initializing char device with minor device number 6 [ 32.270845] dvblo: dvblo_chardev_init(): added character device dvblo6 [ 32.270853] dvblo: dvblo_chardev_init(): initializing char device with minor device number 7 [ 32.270885] dvblo: dvblo_chardev_init(): added character device dvblo7 [ 32.270893] dvblo: dvblo_init(): successfully initialized DVB Loopback Adapter Version 0.9.4 [ 32.713724] EXT3 FS on sda3, internal journal [ 33.545796] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 34.124831] r8101: eth0: link up [ 34.343576] i2c-adapter i2c-1: SMBus Quick command not supported, can't probe for chips [ 34.490211] kjournald starting. Commit interval 5 seconds [ 34.529426] i2c-adapter i2c-0: found SMSC47M192 or compatible, version 2, stepping A0 [ 34.620240] smsc47m1: Found SMSC LPC47M15x/LPC47M192/LPC47M997 [ 34.660343] w83627ehf: unsupported chip ID: 0xffff [ 34.660361] w83627ehf: unsupported chip ID: 0xffff [ 34.709500] EXT3 FS on sda4, internal journal [ 34.709514] EXT3-fs: mounted filesystem with ordered data mode. [ 34.712732] coretemp: Unknown CPU model 1c [ 34.712740] coretemp: Unknown CPU model 1c [ 36.636100] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 36.879837] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 36.899793] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 36.934759] lirc_dev: IR Remote Control driver registered, at major 61 [ 37.436375] lirc_serial: auto-detected active low receiver [ 37.436385] lirc_dev: lirc_register_plugin: sample_rate: 0