AE_NOT_FOUND search_node cffd9720 start_node cffd9720 return_node 00000000 ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._PRW] (Node cffd9720), AE_NOT_FOUND ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI-0352: *** Error: Looking up [INX_] in namespace, AE_NOT_FOUND search_node cffd9720 start_node cffd9720 return_node 00000000 ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._PRW] (Node cffd9720), AE_NOT_FOUND ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:09.1[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.20 [Flags: R/W]. Initializing Cryptographic API Activating ISA DMA hang workarounds. vesafb: framebuffer at 0xe4000000, mapped to 0xd0880000, size 1875k vesafb: mode is 800x600x16, linelength=1600, pages=33 vesafb: protected mode interface info at c000:441b vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device ACPI: Power Button (FF) [PWRF] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states) ACPI: Thermal Zone [THRM] (22 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Using anticipatory io scheduler FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c596b (rev 12) IDE UDMA66 controller on pci0000:00:07.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: ST310211A, ATA DISK drive hdb: LTN526, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 19541088 sectors (10005 MB) w/512KiB Cache, CHS=19386/16/63, UDMA(66) hda: cache flushes not supported /dev/ide/host0/bus0/target0/lun0:hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hdb: DMA disabled ide0: reset: success p1 hdb: ATAPI 52X CD-ROM drive, 120kB Cache Uniform CD-ROM driver Revision: 3.20 usbcore: registered new driver aiptek drivers/usb/input/aiptek.c: v1.5 (May-15-2004): Bryan W. Headley/Chris Atenasio drivers/usb/input/aiptek.c: Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S4bios S5) ACPI wakeup devices: EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. EXT3-fs: recovery complete. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 144k freed hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown ide0: reset: success EXT3 FS on hda1, internal journal cdfs 2.6.3a loaded. ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:07.2: irq 10, io base 0000d400 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb 1-2: new full speed USB device using address 2 Adding 262136k swap on /var/vm/swapfile. Priority:-1 extents:68 Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices Vendor: UDISK Model: PDU20_2G 7AI2.0 Rev: 0.00 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 3964927 512-byte hdwr sectors (2030 MB) sda: assuming Write Enabled sda: assuming drive cache: write through /dev/scsi/host0/bus0/target0/lun0: p1 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11 eth0: RealTek RTL8139 at 0xd0840000, 00:c0:26:24:7b:7b, IRQ 11 eth0: Identified 8139 chip type 'RTL-8100B/8139D' eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 lirc_dev: IR Remote Control driver registered, at major 61 lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted. lirc_serial: auto-detected active high receiver lirc_dev: lirc_register_plugin:sample_rate: 0 lirc_serial: auto-detected active high receiver lirc_dev: lirc_register_plugin:sample_rate: 0