HINT: LinVDR is using the busybox syslogd.
Type "logread" or "logread -f" to see syslog messages.
Oct 23 22:24:23 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Oct 23 22:24:23 linvdr user.info kernel: 8139too Fast Ethernet driver 0.9.27
Oct 23 22:24:23 linvdr user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Oct 23 22:24:23 linvdr user.debug kernel: PCI: setting IRQ 11 as level-triggered
Oct 23 22:24:23 linvdr user.info kernel: GSI 11 (level, low) -> IRQ 11
Oct 23 22:24:23 linvdr user.info kernel: eth0: RealTek RTL8139 at 0xc8900000, 00:c1:26:02:b6:fe, IRQ 11
Oct 23 22:24:23 linvdr user.debug kernel: eth0:  Identified 8139 chip type 'RTL-8139C'
Oct 23 22:24:23 linvdr user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Oct 23 22:24:24 linvdr auth.info sshd[1208]: Server listening on 0.0.0.0 port 22.
Oct 23 22:24:24 linvdr daemon.info init: ^MStarting pid 1217, console /dev/tty1: '/sbin/getty'
Oct 23 22:24:24 linvdr daemon.info init: ^MStarting pid 1218, console /dev/tty2: '/sbin/getty'
Oct 23 22:24:24 linvdr daemon.info init: ^MStarting pid 1219, console /dev/tty3: '/sbin/getty'
Oct 23 22:24:24 linvdr daemon.info init: ^MStarting pid 1220, console /dev/tty4: '/sbin/getty'
Oct 23 22:24:24 linvdr user.info kernel: Linux video capture interface: v2.00
Oct 23 22:24:25 linvdr user.info kernel: cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
Oct 23 22:24:25 linvdr user.info kernel: CORE cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected]
Oct 23 22:24:25 linvdr user.info kernel: TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
Oct 23 22:24:25 linvdr user.info kernel: tveeprom 0-0050: Hauppauge model 92001, rev B2B1, serial# 778658
Oct 23 22:24:25 linvdr user.info kernel: tveeprom 0-0050: MAC address is 00-0D-FE-0B-E1-A2
Oct 23 22:24:25 linvdr user.info kernel: tveeprom 0-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
Oct 23 22:24:25 linvdr user.info kernel: tveeprom 0-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
Oct 23 22:24:25 linvdr user.info kernel: tveeprom 0-0050: audio processor is CX883 (idx 32)
Oct 23 22:24:25 linvdr user.info kernel: tveeprom 0-0050: decoder processor is CX883 (idx 22)
Oct 23 22:24:25 linvdr user.info kernel: tveeprom 0-0050: has no radio, has IR remote
Oct 23 22:24:25 linvdr user.info kernel: cx88[0]: hauppauge eeprom: model=92001
Oct 23 22:24:25 linvdr user.info kernel: input: cx88 IR (Hauppauge Nova-S-Plus  as /class/input/input0
Oct 23 22:24:25 linvdr user.warn kernel: cx88[0]/2: cx2388x 8802 Driver Manager
Oct 23 22:24:25 linvdr user.info kernel: GSI 11 (level, low) -> IRQ 11
Oct 23 22:24:25 linvdr user.info kernel: cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 11, latency: 64, mmio: 0xe4000000
Oct 23 22:24:25 linvdr user.info kernel: cx2388x dvb driver version 0.0.6 loaded
Oct 23 22:24:25 linvdr user.info kernel: cx8802_register_driver() ->registering driver type=dvb access=shared
Oct 23 22:24:25 linvdr user.info kernel: CORE cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37]
Oct 23 22:24:25 linvdr user.warn kernel: cx88[0]/2: cx2388x based dvb card
Oct 23 22:24:25 linvdr user.warn kernel: DVB: registering new adapter (cx88[0]).
Oct 23 22:24:25 linvdr user.warn kernel: DVB: registering frontend 0 (Conexant CX24123/CX24109)...
Oct 23 22:24:25 linvdr user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
Oct 23 22:24:25 linvdr user.debug kernel: PCI: setting IRQ 12 as level-triggered
Oct 23 22:24:25 linvdr user.info kernel: GSI 12 (level, low) -> IRQ 12
Oct 23 22:24:25 linvdr user.info kernel: memory: 0xe6000000.
Oct 23 22:24:25 linvdr user.info kernel: em8300: mapped-memory at 0xc9b80000
Oct 23 22:24:25 linvdr user.info kernel: em8300: using MTRR
Oct 23 22:24:25 linvdr user.info kernel: em8300_main.o: Chip revision: 2
Oct 23 22:24:25 linvdr user.notice kernel: adv717x.o: ADV7175A chip detected
Oct 23 22:24:25 linvdr user.notice kernel: adv717x.o: Configuring for PAL 60
Oct 23 22:24:26 linvdr user.info vdr: [1310] VDR version 1.4.3-2-Toxic-Ed. started
Oct 23 22:24:26 linvdr user.info vdr: [1310] Bigpatch 17.09.2006 is active!
Oct 23 22:24:26 linvdr user.info vdr: [1310] loading plugin: /usr/lib/vdr/plugins/libvdr-dxr3.so.1.4.4
Oct 23 22:24:26 linvdr user.info vdr: [1310] loading plugin: /usr/lib/vdr/plugins/libvdr-mp3.so.1.4.4
Oct 23 22:24:26 linvdr user.info vdr: [1310] loading plugin: /usr/lib/vdr/plugins/libvdr-mp3ng.so.1.4.4
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.4
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading plugin: /usr/lib/vdr/plugins/libvdr-sysinfo.so.1.4.4
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading plugin: /usr/lib/vdr/plugins/libvdr-vcd.so.1.4.4
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading plugin: /usr/lib/vdr/plugins/libvdr-remote.so.1.4.4
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading plugin: /usr/lib/vdr/plugins/libvdr-externalplayer.so.1.4.4
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading /etc/vdr/setup.conf
Oct 23 22:24:27 linvdr user.err vdr: [1310] ERROR: unknown config parameter: PreferredChannel = 0
Oct 23 22:24:27 linvdr user.err vdr: [1310] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 23 22:24:27 linvdr user.err vdr: [1310] ERROR: unknown config parameter: ShowProgressBar = 0
Oct 23 22:24:27 linvdr user.err vdr: [1310] ERROR: unknown config parameter: SortTimers = 1
Oct 23 22:24:27 linvdr user.err vdr: [1310] ERROR: unknown config parameter: StartupVolume = 255
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading /etc/vdr/sources.conf
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading /etc/vdr/diseqc.conf
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading /etc/vdr/channels.conf
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading /etc/vdr/timers.conf
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading /etc/vdr/commands.conf
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading /etc/vdr/reccmds.conf
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading /etc/vdr/svdrphosts.conf
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading /etc/vdr/remote.conf
Oct 23 22:24:27 linvdr user.info vdr: [1310] loading /etc/vdr/keymacros.conf
Oct 23 22:24:27 linvdr user.debug vdr: [1310] reading EPG data from /ramdisk/epg.data
Oct 23 22:24:27 linvdr user.debug vdr: [1314] video directory scanner thread started (pid=1314, tid=1314)
Oct 23 22:24:27 linvdr user.debug vdr: [1315] video directory scanner thread started (pid=1315, tid=1315)
Oct 23 22:24:27 linvdr user.debug vdr: [1310] probing /dev/dvb/adapter0/frontend0
Oct 23 22:24:27 linvdr user.debug vdr: [1315] video directory scanner thread ended (pid=1315, tid=1315)
Oct 23 22:24:27 linvdr user.debug vdr: [1317] tuner on device 1 thread started (pid=1317, tid=1317)
Oct 23 22:24:27 linvdr user.debug vdr: [1318] section handler thread started (pid=1318, tid=1318)
Oct 23 22:24:27 linvdr user.debug vdr: [1310] probing /dev/dvb/adapter1/frontend0
Oct 23 22:24:27 linvdr user.info vdr: [1310] found 1 video device
Oct 23 22:24:27 linvdr user.info vdr: [1310] initializing plugin: dxr3 (0.2.7-cvs): Hardware MPEG decoder
Oct 23 22:24:27 linvdr user.debug vdr: [1314] video directory scanner thread ended (pid=1314, tid=1314)
Oct 23 22:24:28 linvdr user.notice kernel: adv717x.o: Configuring for PAL
Oct 23 22:24:28 linvdr user.notice kernel: em8300_audio.o: Analog audio enabled
Oct 23 22:24:28 linvdr user.notice kernel: em8300: Microcode version 0x29 loaded
Oct 23 22:24:28 linvdr user.debug vdr: [1310] dxr3: configure: video mode: PAL
Oct 23 22:24:28 linvdr user.notice kernel: adv717x.o: Configuring for PAL
Oct 23 22:24:28 linvdr user.debug vdr: [1310] dxr3: configure: audio mode: analog
Oct 23 22:24:28 linvdr user.info vdr: [1310] dxr3: setting analog audio mode
Oct 23 22:24:28 linvdr user.notice kernel: em8300_audio.o: Analog audio enabled
Oct 23 22:24:28 linvdr user.debug vdr: [1310] dxr3: intf: brightness=500,contrast=500,saturation=500 at init
Oct 23 22:24:28 linvdr user.debug vdr: [1319] DXR3 audio output thread started (pid=1319, tid=1319)
Oct 23 22:24:28 linvdr user.debug vdr: [1320] DXR3 video output thread started (pid=1320, tid=1320)
Oct 23 22:24:28 linvdr user.info vdr: [1310] initializing plugin: mp3 (0.9.15): A versatile audio player
Oct 23 22:24:28 linvdr user.info vdr: [1310] loading /etc/vdr/plugins/mp3sources.conf
Oct 23 22:24:28 linvdr user.err vdr: [1310] WARNING: source base /dev/cdrom expands to /dev/hdc
Oct 23 22:24:28 linvdr user.err vdr: [1310] WARNING: source base /dev/hdc is not a directory
Oct 23 22:24:28 linvdr user.info vdr: [1310] initializing plugin: mp3ng (0.0.9a): Next Generation audio player
Oct 23 22:24:28 linvdr user.info vdr: [1310] mp3ng: Loading themefile 
Oct 23 22:24:28 linvdr user.info vdr: [1310] loading /etc/vdr/plugins/mp3ng/mp3sources.conf
Oct 23 22:24:28 linvdr user.info vdr: [1310] initializing plugin: mplayer (0.9.15): Media replay via MPlayer
Oct 23 22:24:28 linvdr user.info vdr: [1310] loading /etc/vdr/plugins/mplayersources.conf
Oct 23 22:24:28 linvdr user.info vdr: [1310] initializing plugin: sysinfo (0.1.0a): System information plugin
Oct 23 22:24:28 linvdr user.info vdr: [1310] initializing plugin: vcd (0.7): VideoCD Player
Oct 23 22:24:28 linvdr user.info vdr: [1310] initializing plugin: remote (0.3.7): Remote control
Oct 23 22:24:28 linvdr user.info vdr: [1310] initializing plugin: externalplayer (0.0.1): launch external players from main menu
Oct 23 22:24:28 linvdr user.info vdr: [1310] setting primary device to 2
Oct 23 22:24:28 linvdr user.info vdr: [1310] SVDRP listening on port 2001
Oct 23 22:24:28 linvdr user.info vdr: [1310] setting current skin to "classic"
Oct 23 22:24:28 linvdr user.info vdr: [1310] loading /etc/vdr/themes/classic-default.theme
Oct 23 22:24:28 linvdr user.info vdr: [1310] starting plugin: dxr3
Oct 23 22:24:28 linvdr user.info vdr: [1310] starting plugin: mp3
Oct 23 22:24:28 linvdr user.info vdr: [1310] starting plugin: mp3ng
Oct 23 22:24:28 linvdr user.info vdr: [1310] starting plugin: mplayer
Oct 23 22:24:28 linvdr user.info vdr: [1310] starting plugin: sysinfo
Oct 23 22:24:28 linvdr user.info vdr: [1310] starting plugin: vcd
Oct 23 22:24:28 linvdr user.info vdr: [1310] starting plugin: remote
Oct 23 22:24:28 linvdr user.debug vdr: [1310] device /dev/input/event0: cx88 IR (Hauppauge Nova-S-Plus 
Oct 23 22:24:28 linvdr user.debug vdr: [1310] remote: using '/dev/input/event0'
Oct 23 22:24:28 linvdr user.debug vdr: [1310] remote-event0: autorepeat supported
Oct 23 22:24:28 linvdr user.debug vdr: [1310] remote-event0: exclusive access granted
Oct 23 22:24:28 linvdr user.info vdr: [1310] starting plugin: externalplayer
Oct 23 22:24:28 linvdr user.err vdr: [1310] ERROR: /dev/lircd: Connection refused
Oct 23 22:24:28 linvdr user.debug vdr: [1322] KBD remote control thread started (pid=1322, tid=1322)
Oct 23 22:24:28 linvdr user.debug vdr: [1310] remote control remote-event0 - keys known
Oct 23 22:24:28 linvdr user.err vdr: [1310] ERROR: remote control LIRC not ready!
Oct 23 22:24:28 linvdr user.debug vdr: [1310] remote control KBD - learning keys
Oct 23 22:24:29 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 8030
Oct 23 22:24:39 linvdr user.info vdr: [1310] switching to channel 6
Oct 23 22:24:39 linvdr user.debug vdr: [1326] transfer thread started (pid=1326, tid=1326)
Oct 23 22:24:39 linvdr user.debug vdr: [1327] receiver on device 1 thread started (pid=1327, tid=1327)
Oct 23 22:24:39 linvdr user.debug vdr: [1328] TS buffer on device 1 thread started (pid=1328, tid=1328)
Oct 23 22:24:39 linvdr user.debug vdr: [1310] setting watchdog timer to 900 seconds
Oct 23 22:24:39 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:39 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:39 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:39 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:39 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:39 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:39 linvdr user.debug kernel: cx88[0]/2-mpeg: cx8802_timeout
Oct 23 22:24:39 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:39 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:39 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:39 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:39 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:39 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1326] setting audio track to 1 (0)
Oct 23 22:24:40 linvdr user.debug vdr: [1326] dxr3: audiodecoder: found different audio header (new: 0xff, old: 0xca5fcff), (re)initializing
Oct 23 22:24:40 linvdr user.debug vdr: [1326] dxr3: audiodecoder: sample rate=0
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:40 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:41 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:42 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:43 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:44 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:44 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:44 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:44 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:44 linvdr user.debug vdr: [1310] dxr3: cSPUEncoder::Flush: OSD data size: 6156
Oct 23 22:24:44 linvdr user.debug vdr: [1310] assuming manual start of VDR
Oct 23 22:24:46 linvdr auth.info sshd[1329]: Accepted password for root from 192.168.0.2 port 3211 ssh2
Oct 23 22:24:46 linvdr auth.info PAM_unix[1329]: (ssh) session opened for user root by (uid=0)
Oct 23 22:24:46 linvdr auth.err PAM-env[1329]: Unable to open config file: No such file or directory
Oct 23 22:24:46 linvdr auth.err PAM-env[1330]: Unable to open config file: No such file or directory
Oct 23 22:24:49 linvdr user.debug vdr: [1310] max. latency time 1 seconds
Oct 23 22:24:55 linvdr cron.notice crond[1345]: crond 2.3.2 dillon, started, log level 8 
Oct 23 22:25:01 linvdr cron.notice crond[1345]: USER root pid 1351 cmd convert.pl -q -s