linvdr:~# logread
Aug 14 09:30:44 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Aug 14 09:30:44 linvdr user.info kernel: e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
Aug 14 09:30:44 linvdr user.info kernel: e100: Copyright(c) 1999-2005 Intel Corporation
Aug 14 09:30:44 linvdr user.info kernel: GSI 3 (level, low) -> IRQ 3
Aug 14 09:30:44 linvdr user.info kernel: e100: eth0: e100_probe: addr 0x82400000, irq 3, MAC addr 08:00:06:29:29:91
Aug 14 09:30:44 linvdr local0.info udhcpc[1152]: udhcpc (v0.9.9-pre) started
Aug 14 09:30:44 linvdr user.info kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Aug 14 09:30:44 linvdr local0.debug udhcpc[1152]: Sending discover...
Aug 14 09:30:45 linvdr user.info kernel: Linux video capture interface: v1.00
Aug 14 09:30:46 linvdr user.warn kernel: saa7146: register extension 'dvb'.
Aug 14 09:30:46 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
Aug 14 09:30:46 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Aug 14 09:30:46 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
Aug 14 09:30:46 linvdr user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Aug 14 09:30:46 linvdr user.info kernel: flexcop-pci: will use the HW PID filter.
Aug 14 09:30:46 linvdr user.info kernel: flexcop-pci: card revision 1
Aug 14 09:30:46 linvdr user.warn kernel: ACPI: PCI Interrupt Link [PILA] enabled at IRQ 11
Aug 14 09:30:46 linvdr user.warn kernel: PCI: setting IRQ 11 as level-triggered
Aug 14 09:30:46 linvdr user.info kernel: GSI 11 (level, low) -> IRQ 11
Aug 14 09:30:46 linvdr user.warn kernel: DVB: registering new adapter (FlexCop Digital TV device).
Aug 14 09:30:46 linvdr user.info kernel: b2c2-flexcop: MAC address = 00:d0:d7:02:0f:f3
Aug 14 09:30:46 linvdr user.info kernel: b2c2-flexcop: found the stv0299 at i2c address: 0x68
Aug 14 09:30:46 linvdr user.warn kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)...
Aug 14 09:30:46 linvdr user.info kernel: b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopII' complete
Aug 14 09:30:46 linvdr user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
Aug 14 09:30:46 linvdr user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
Aug 14 09:30:46 linvdr local0.debug udhcpc[1152]: Sending discover...
Aug 14 09:30:47 linvdr user.info kernel: lirc_serial: auto-detected active high receiver
Aug 14 09:30:47 linvdr user.warn kernel: lirc_dev: lirc_register_plugin: sample_rate: 0
Aug 14 09:30:48 linvdr local0.debug udhcpc[1152]: Sending select for 192.168.178.22...
Aug 14 09:30:48 linvdr local0.info udhcpc[1152]: Lease of 192.168.178.22 obtained, lease time 864000
Aug 14 09:30:48 linvdr daemon.notice lircd-0.8.0pre3[1264]: lircd(serial) ready
Aug 14 09:30:48 linvdr user.info vdr[1283]: VDR version 1.3.17 started
Aug 14 09:30:48 linvdr user.info vdr[1283]: loading plugin: /usr/lib/vdr/plugins/libvdr-externalplayer.so.1.3.17
Aug 14 09:30:49 linvdr user.info vdr[1283]: loading /etc/vdr/setup.conf
Aug 14 09:30:49 linvdr auth.info sshd[1289]: Server listening on 0.0.0.0 port 22.
Aug 14 09:30:49 linvdr user.info vdr[1283]: loading /etc/vdr/sources.conf
Aug 14 09:30:49 linvdr user.info vdr[1283]: loading /etc/vdr/diseqc.conf
Aug 14 09:30:49 linvdr daemon.info init: ^MStarting pid 1296, console /dev/tty1: '/sbin/getty'
Aug 14 09:30:49 linvdr daemon.info init: ^MStarting pid 1297, console /dev/tty2: '/sbin/getty'
Aug 14 09:30:49 linvdr user.info vdr[1283]: loading /etc/vdr/channels.conf
Aug 14 09:30:49 linvdr user.info vdr[1283]: loading /etc/vdr/timers.conf
Aug 14 09:30:49 linvdr user.info vdr[1283]: loading /etc/vdr/commands.conf
Aug 14 09:30:49 linvdr daemon.info init: ^MStarting pid 1298, console /dev/tty3: '/sbin/getty'
Aug 14 09:30:49 linvdr user.info vdr[1283]: loading /etc/vdr/reccmds.conf
Aug 14 09:30:49 linvdr user.info vdr[1283]: loading /etc/vdr/svdrphosts.conf
Aug 14 09:30:49 linvdr user.info vdr[1283]: loading /etc/vdr/ca.conf
Aug 14 09:30:49 linvdr daemon.info init: ^MStarting pid 1299, console /dev/tty4: '/sbin/getty'
Aug 14 09:30:49 linvdr user.info vdr[1283]: loading /etc/vdr/remote.conf
Aug 14 09:30:49 linvdr user.info vdr[1283]: loading /etc/vdr/keymacros.conf
Aug 14 09:30:49 linvdr user.debug vdr[1283]: reading EPG data from /ramdisk/epg.data
Aug 14 09:30:49 linvdr user.debug vdr[1283]: probing /dev/dvb/adapter0/frontend0
Aug 14 09:30:49 linvdr user.debug vdr[1320]: tuner on device 1 thread started (pid=1320, tid=1026)
Aug 14 09:30:49 linvdr user.debug vdr[1321]: Section handler thread started (pid=1321, tid=2051)
Aug 14 09:30:49 linvdr user.debug vdr[1283]: probing /dev/dvb/adapter1/frontend0
Aug 14 09:30:49 linvdr user.info vdr[1283]: found 1 video device
Aug 14 09:30:49 linvdr user.info vdr[1283]: initializing plugin: externalplayer (0.0.1): launch external players from main menu
Aug 14 09:30:49 linvdr user.info vdr[1283]: setting primary device to 1
Aug 14 09:30:49 linvdr user.info vdr[1283]: device 1 has no MPEG decoder
Aug 14 09:30:49 linvdr user.info vdr[1283]: SVDRP listening on port 2001
Aug 14 09:30:49 linvdr user.info vdr[1283]: starting plugin: externalplayer
Aug 14 09:30:50 linvdr user.info vdr[1283]: loading /etc/vdr/themes/classic-default.theme
Aug 14 09:30:50 linvdr daemon.notice lircd-0.8.0pre3[1264]: accepted new client on /dev/lircd
Aug 14 09:30:50 linvdr user.debug vdr[1322]: LIRC remote control thread started (pid=1322, tid=3076)
Aug 14 09:30:50 linvdr user.debug vdr[1323]: KBD remote control thread started (pid=1323, tid=4101)
Aug 14 09:30:50 linvdr user.debug vdr[1283]: remote control LIRC - keys known
Aug 14 09:30:50 linvdr user.debug vdr[1283]: remote control KBD - keys known
Aug 14 09:30:50 linvdr user.info vdr[1283]: switching to channel 23
Aug 14 09:30:50 linvdr user.debug vdr[1283]: setting watchdog timer to 900 seconds
Aug 14 09:30:50 linvdr user.err vdr[1283]: ERROR: no OSD provider available - using dummy OSD!
Aug 14 09:30:51 linvdr user.info vdr[1321]: channel 2 (RTL Television) event 09:30 'Mein Baby' status 4
Aug 14 09:30:51 linvdr user.info vdr[1321]: channel 6 (Super RTL) event 09:30 'SpongeBob Schwammkopf' status 4
Aug 14 09:30:51 linvdr user.info vdr[1321]: channel 23 (VOX) event 09:25 'Die Nanny' status 4
Aug 14 09:30:51 linvdr user.info vdr[1321]: channel 3 (RTL2) event 09:00 'Zuhause im Glück - Unser Einzug in ein neues Leben' status 4
Aug 14 09:30:56 linvdr user.debug vdr[1283]: assuming manual start of VDR
Aug 14 09:30:56 linvdr user.debug vdr[1283]: max. latency time 1 seconds
Aug 14 09:30:56 linvdr user.info vdr[1283]: connect from 127.0.0.1, port 2258 - accepted
Aug 14 09:30:58 linvdr user.debug vdr[1283]: max. latency time 2 seconds
Aug 14 09:30:58 linvdr user.info vdr[1283]: closing SVDRP connection
Aug 14 09:31:21 linvdr cron.notice crond[1337]: crond 2.3.2 dillon, started, log level 8
Aug 14 09:35:01 linvdr cron.notice crond[1337]: USER root pid 1339 cmd convert.pl -q -s
Aug 14 09:35:03 linvdr auth.info sshd[1338]: Accepted password for root from 192.168.178.20 port 1043 ssh2
Aug 14 09:35:03 linvdr auth.info sshd[1338]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
Aug 14 09:35:03 linvdr auth.info PAM_unix[1338]: (ssh) session opened for user root by (uid=0)
Aug 14 09:35:04 linvdr auth.err PAM-env[1338]: Unable to open config file: No such file or directory
Aug 14 09:35:04 linvdr auth.err PAM-env[1340]: Unable to open config file: No such file or directory
linvdr:~#