smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda ATA IV family Device Model: ST360021A Serial Number: 3HR0AS15 Firmware Version: 3.10 User Capacity: 60.022.480.896 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Jul 12 00:29:42 2006 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 422) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 44) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 074 065 034 Pre-fail Always - 151598608 3 Spin_Up_Time 0x0003 075 070 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 786 5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 58 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 243378004 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 9898 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 3044 194 Temperature_Celsius 0x0022 041 052 000 Old_age Always - 41 195 Hardware_ECC_Recovered 0x001a 074 065 000 Old_age Always - 151598608 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 198 000 Old_age Always - 3 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 4 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4 occurred at disk power-on lifetime: 1152 hours (48 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 4d 33 f9 01 e1 Error: UNC at LBA = 0x0101f933 = 16906547 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 80 00 f9 01 e1 00 00:46:51.809 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:46:51.797 READ DMA 40 00 80 80 f8 01 e1 00 00:46:51.784 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:46:51.768 READ DMA 40 00 00 80 f8 01 e1 00 00:46:47.047 READ VERIFY SECTOR(S) Error 3 occurred at disk power-on lifetime: 1152 hours (48 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 4d 33 f9 01 e1 Error: UNC at LBA = 0x0101f933 = 16906547 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 00 80 f8 01 e1 00 00:46:47.047 READ VERIFY SECTOR(S) 40 00 00 80 f7 01 e1 00 00:46:47.044 READ VERIFY SECTOR(S) 40 00 00 80 f6 01 e1 00 00:46:47.041 READ VERIFY SECTOR(S) 40 00 00 80 f5 01 e1 00 00:46:47.039 READ VERIFY SECTOR(S) 40 00 00 80 f4 01 e1 00 00:46:47.035 READ VERIFY SECTOR(S) Error 2 occurred at disk power-on lifetime: 1126 hours (46 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 80 f7 ce fc e6 Error: IDNF 128 sectors at LBA = 0x06fccef7 = 117231351 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 f7 ce fc e6 00 00:24:08.739 READ DMA c8 00 80 77 ce fc e6 00 00:24:08.736 READ DMA c8 00 80 f7 cd fc e6 00 00:24:08.732 READ DMA c8 00 80 77 cd fc e6 00 00:24:08.730 READ DMA c8 00 80 f7 cc fc e6 00 00:24:08.728 READ DMA Error 1 occurred at disk power-on lifetime: 1117 hours (46 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 80 f7 ce fc e6 Error: IDNF 128 sectors at LBA = 0x06fccef7 = 117231351 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 f7 ce fc e6 00 01:37:54.533 READ DMA c8 00 80 77 ce fc e6 00 01:37:54.531 READ DMA c8 00 80 f7 cd fc e6 00 01:37:54.527 READ DMA c8 00 80 77 cd fc e6 00 01:37:54.525 READ DMA c8 00 80 f7 cc fc e6 00 01:37:54.523 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9511 - # 2 Extended offline Completed without error 00% 6622 - # 3 Short offline Completed without error 00% 4274 - # 4 Extended offline Completed without error 00% 1524 - # 5 Short offline Completed without error 00% 1505 - # 6 Extended offline Aborted by host 90% 1505 - Device does not support Selective Self Tests/Logging