Hallo:
Also ich lasse das Bild über die FuSie ausgeben.
DVB-T und DVB-C wird auch angezeigt
var/log/messages:
HINT: LinVDR is using the busybox syslogd.
Type "logread" or "logread -f" to see syslog messages.
Oct 12 13:50:45 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 2 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 3 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:45 linvdr user.info kernel: [ 30.946093] ata2: EH complete
Oct 12 13:50:45 linvdr user.info kernel: [ 30.999871] ata2: soft resetting port
Oct 12 13:50:45 linvdr user.info kernel: [ 31.034095] ata1: EH complete
Oct 12 13:50:45 linvdr user.info kernel: [ 31.073199] ata1: soft resetting port
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 4 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:45 linvdr user.info kernel: [ 31.161031] ata2: EH pending after completion, repeating EH (cnt=4)
Oct 12 13:50:45 linvdr user.info kernel: [ 31.161053] ata2: soft resetting port
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 5 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 6 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:45 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 7 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:45 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:45 linvdr user.info kernel: [ 31.234008] ata1: EH complete
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 0 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 2 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 3 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 4 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 5 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 6 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 7 0 ...
Oct 12 13:50:45 linvdr user.info kernel: [ 31.321978] ata2: EH pending after completion, repeating EH (cnt=3)
Oct 12 13:50:45 linvdr user.info kernel: [ 31.321999] ata2: soft resetting port
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 0 0 ...
Oct 12 13:50:46 linvdr user.info kernel: [ 31.482898] ata2: EH pending after completion, repeating EH (cnt=2)
Oct 12 13:50:46 linvdr user.info kernel: [ 31.482918] ata2: soft resetting port
Oct 12 13:50:46 linvdr user.info kernel: [ 31.643851] ata2: EH complete
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.info kernel: [ 31.733132] ata2: soft resetting port
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.info kernel: [ 31.894859] ata2: EH pending after completion, repeating EH (cnt=4)
Oct 12 13:50:46 linvdr user.info kernel: [ 31.895084] ata2: soft resetting port
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.info kernel: [ 31.935765] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Oct 12 13:50:46 linvdr user.info kernel: GSI 23 (level, low) -> IRQ 19
Oct 12 13:50:46 linvdr user.info kernel: f9, IRQ 19.
Oct 12 13:50:46 linvdr user.info kernel: [ 31.940202] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.info kernel: [ 32.023752] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Oct 12 13:50:46 linvdr user.info kernel: [ 32.056738] ata2: EH complete
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:47 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:47 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:47 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:47 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:47 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:47 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:47 linvdr user.info kernel: [ 32.461124] Linux video capture interface: v2.00
Oct 12 13:50:47 linvdr auth.info sshd[2753]: Server listening on 0.0.0.0 port 22.
Oct 12 13:50:47 linvdr daemon.info init: ^MStarting pid 2774, console /dev/tty1: '/sbin/getty'
Oct 12 13:50:47 linvdr daemon.info init: ^MStarting pid 2775, console /dev/tty2: '/sbin/getty'
Oct 12 13:50:47 linvdr daemon.info init: ^MStarting pid 2778, console /dev/tty3: '/sbin/getty'
Oct 12 13:50:47 linvdr daemon.info init: ^MStarting pid 2781, console /dev/tty4: '/sbin/getty'
Oct 12 13:50:47 linvdr user.info kernel: [ 32.852673] ivtv: Start initialization, version 1.2.0
Oct 12 13:50:47 linvdr user.info kernel: [ 32.855969] ivtv0: Initializing card #0
Oct 12 13:50:47 linvdr user.info kernel: [ 32.856233] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:50:47 linvdr user.warn kernel: [ 32.856369] PCI: Enabling device 0000:00:0c.0 (0014 -> 0016)
Oct 12 13:50:47 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:50:47 linvdr user.info kernel: [ 32.856525] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Oct 12 13:50:47 linvdr user.info kernel: [ 32.908694] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:50:47 linvdr user.info kernel: [ 32.908907] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:50:47 linvdr user.info kernel: [ 32.908975] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:50:47 linvdr user.info kernel: [ 32.909038] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:50:47 linvdr user.info kernel: [ 32.909099] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:50:47 linvdr user.info kernel: [ 32.909159] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:50:47 linvdr user.info kernel: [ 32.909221] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:50:47 linvdr user.info kernel: [ 33.116095] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:50:47 linvdr user.info kernel: [ 33.269984] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:50:47 linvdr user.info kernel: [ 33.281098] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:50:47 linvdr user.info kernel:
Oct 12 13:50:47 linvdr user.info kernel: [ 33.302830] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:50:47 linvdr user.info kernel: [ 33.303067] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:50:47 linvdr user.info kernel: [ 33.317224] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:50:47 linvdr user.info kernel: [ 33.320426] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:50:47 linvdr user.info kernel: [ 33.323598] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:50:47 linvdr user.info kernel: [ 33.326811] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:50:48 linvdr user.info kernel: [ 33.330013] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:50:48 linvdr user.info kernel: [ 33.333287] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:50:48 linvdr user.info kernel: [ 33.335723] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:50:48 linvdr user.info kernel: [ 33.338875] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:50:48 linvdr user.info kernel: [ 33.340055] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:50:48 linvdr user.info kernel: [ 33.340215] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:50:48 linvdr user.info kernel: [ 33.340320] ivtv: End initialization
Oct 12 13:50:48 linvdr user.info kernel: [ 34.074498] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:50:48 linvdr user.info kernel: [ 34.110878] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:50:48 linvdr user.info kernel: [ 34.313558] ivtv0: Encoder revision: 0x02060039
Oct 12 13:50:48 linvdr user.info kernel: [ 34.313908] ivtv0: Decoder revision: 0x02020023
Oct 12 13:50:49 linvdr user.info kernel: [ 34.411373] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:50:49 linvdr user.info kernel: [ 34.613293] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:50:49 linvdr user.info kernel: [ 34.721210] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:50:49 linvdr user.warn kernel: [ 34.986707] saa7146: register extension 'dvb'.
Oct 12 13:50:49 linvdr user.warn kernel: [ 34.989854] PCI: Enabling device 0000:00:0e.0 (0004 -> 0006)
Oct 12 13:50:49 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:50:49 linvdr user.warn kernel: found saa7146 @ mem f90ec000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:50:49 linvdr user.info kernel: [ 35.034407] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:50:49 linvdr user.warn kernel: [ 35.172806] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.508905] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.509148] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.600853] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:50:50 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:50:50 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.639184] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:50:50 linvdr user.info kernel: [ 35.645217] input: DVB on-card IR receiver as /class/input/input2
Oct 12 13:50:50 linvdr user.info kernel: [ 35.648377] dvb-ttpci: found av7110-0.
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.683226] saa7146: register extension 'budget dvb'.
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.713379] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.735102] saa7146: register extension 'budget_av'.
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.738252] PCI: Enabling device 0000:00:0a.0 (0004 -> 0006)
Oct 12 13:50:50 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:50:50 linvdr user.warn kernel: found saa7146 @ mem f9918000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.738692] saa7146 (1): dma buffer size 192512
Oct 12 13:50:50 linvdr user.info kernel: [ 35.738768] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.879542] adapter failed MAC signature check
Oct 12 13:50:50 linvdr user.warn kernel: ff
Oct 12 13:50:50 linvdr user.info kernel: [ 36.119958] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:50:50 linvdr user.warn kernel: [ 36.276421] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:50:50 linvdr user.info kernel: [ 36.282601] budget-av: ci interface initialised.
Oct 12 13:50:51 linvdr user.info kernel: [ 36.335639] bttv: driver version 0.9.17 loaded
Oct 12 13:50:51 linvdr user.info kernel: [ 36.335875] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:50:51 linvdr user.info kernel: [ 36.341854] bttv: Bt8xx card found (0).
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.342086] PCI: Enabling device 0000:00:0d.0 (0004 -> 0006)
Oct 12 13:50:51 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:50:51 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:50:51 linvdr user.info kernel: [ 36.342347] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:50:51 linvdr user.info kernel: [ 36.342413] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:50:51 linvdr user.debug kernel: [ 36.342509] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:50:51 linvdr user.info kernel: [ 36.345577] bttv0: tuner absent
Oct 12 13:50:51 linvdr user.info kernel: [ 36.348789] bttv0: registered device video2
Oct 12 13:50:51 linvdr user.info kernel: [ 36.352002] bttv0: registered device vbi2
Oct 12 13:50:51 linvdr user.info kernel: ok
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.376561] bttv0: add subdevice "dvb0"
Oct 12 13:50:51 linvdr user.info kernel: [ 36.388612] input: bttv IR (card=123) as /class/input/input3
Oct 12 13:50:51 linvdr user.info kernel: [ 36.409561] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:50:51 linvdr user.info kernel: [ 36.409909] bt878: Bt878 AUDIO function found (0).
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.410011] PCI: Enabling device 0000:00:0d.1 (0004 -> 0006)
Oct 12 13:50:51 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:50:51 linvdr user.info kernel: [ 36.410150] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:50:51 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:50:51 linvdr user.info kernel: [ 36.419771] DVB: registering new adapter (bttv0)
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.476824] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:50:51 linvdr user.info kernel: [ 36.519928] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:50:51 linvdr user.info kernel: [ 36.528314] flexcop-pci: will use the HW PID filter.
Oct 12 13:50:51 linvdr user.info kernel: [ 36.528539] flexcop-pci: card revision 2
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.528611] PCI: Enabling device 0000:00:0b.0 (0004 -> 0007)
Oct 12 13:50:51 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:50:51 linvdr user.info kernel: [ 36.532576] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:50:51 linvdr user.info kernel: [ 36.543252] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.546522] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:50:51 linvdr user.err kernel: [ 36.547037] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:50:51 linvdr user.err kernel: [ 36.747652] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:50:51 linvdr user.info kernel: [ 36.747959] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.748037] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:50:51 linvdr user.info kernel: [ 36.751168] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:50:51 linvdr user.info kernel: [ 36.784180] i2c /dev entries driver
Oct 12 13:50:51 linvdr user.info kernel: [ 36.827408] lirc_dev: IR Remote Control driver registered, major 61
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.835891] lirc_atiusb: no version for "lirc_unregister_plugin" found: kernel tainted.
Oct 12 13:50:51 linvdr user.info kernel: [ 36.839513]
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.839517] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.839771] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:50:51 linvdr user.info kernel: [ 36.841717] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.862586] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:50:51 linvdr user.info kernel: [ 36.878605] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:50:51 linvdr user.info vdr: [3077] VDR version 1.4.7-tt-ext40 started
Oct 12 13:50:51 linvdr user.info vdr: [3077] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading /etc/vdr/setup.conf
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown config parameter: noEPG =
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading /etc/vdr/sources.conf
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading /etc/vdr/diseqc.conf
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading /etc/vdr/channels.conf
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown parameter key 'P'
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: error in /etc/vdr/channels.conf, line 16
Oct 12 13:50:52 linvdr user.info vdr: [3077] deleting plugin: tvonscreen
Oct 12 13:50:52 linvdr user.info vdr: [3077] deleting plugin: skinelchi
Oct 12 13:50:52 linvdr user.info vdr: [3077] deleting plugin: pvrinput
Oct 12 13:50:52 linvdr user.info vdr: [3077] deleting plugin: mplayer
Oct 12 13:50:52 linvdr user.info vdr: [3077] deleting plugin: femon
Oct 12 13:50:52 linvdr user.info vdr: [3077] deleting plugin: dvd
Oct 12 13:50:52 linvdr user.debug vdr: [3077] max. latency time 0 seconds
Oct 12 13:50:52 linvdr user.info vdr: [3077] exiting
Oct 12 13:51:09 linvdr auth.info sshd[3093]: Could not reverse map address 192.168.1.8.
Oct 12 13:51:11 linvdr auth.info sshd[3093]: Accepted password for root from 192.168.1.8 port 2976 ssh2
Oct 12 13:51:11 linvdr auth.info sshd[3093]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
Oct 12 13:51:11 linvdr auth.info PAM_unix[3093]: (ssh) session opened for user root by (uid=0)
Oct 12 13:51:11 linvdr auth.err PAM-env[3093]: Unable to open config file: No such file or directory
Oct 12 13:51:11 linvdr auth.err PAM-env[3094]: Unable to open config file: No such file or directory
Oct 12 13:51:17 linvdr cron.notice crond[3109]: crond 2.3.2 dillon, started, log level 8
Oct 12 13:51:22 linvdr auth.info sshd[3110]: Could not reverse map address 192.168.1.8.
Oct 12 13:51:22 linvdr auth.info sshd[3110]: Accepted password for root from 192.168.1.8 port 2977 ssh2
Oct 12 13:51:22 linvdr auth.info PAM_unix[3110]: (ssh) session opened for user root by (uid=0)
Oct 12 13:51:22 linvdr auth.err PAM-env[3110]: Unable to open config file: No such file or directory
Oct 12 13:51:22 linvdr auth.err PAM-env[3111]: Unable to open config file: No such file or directory
Oct 12 13:51:51 linvdr auth.info sshd[3127]: Could not reverse map address 192.168.1.8.
Oct 12 13:51:51 linvdr auth.info sshd[3127]: Accepted password for root from 192.168.1.8 port 2978 ssh2
Oct 12 13:51:51 linvdr auth.info PAM_unix[3127]: (ssh) session opened for user root by (uid=0)
Oct 12 13:51:51 linvdr auth.err PAM-env[3127]: Unable to open config file: No such file or directory
Oct 12 13:51:51 linvdr auth.err PAM-env[3128]: Unable to open config file: No such file or directory
Oct 12 13:51:54 linvdr user.info kernel: [ 100.256432] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
Oct 12 13:51:54 linvdr user.info kernel: [ 100.262931] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Oct 12 13:51:55 linvdr user.info kernel: [ 100.314556] bt878(0): unloading
Oct 12 13:51:55 linvdr user.debug kernel: [ 100.314778] bt878_mem: 0xf9044000.
Oct 12 13:51:55 linvdr user.info kernel: [ 100.314896] ACPI: PCI interrupt for device 0000:00:0d.1 disabled
Oct 12 13:51:55 linvdr user.warn kernel: [ 100.321214] bttv0: unloading
Oct 12 13:51:55 linvdr user.warn kernel: [ 100.390970] saa7146: unregister extension 'budget_av'.
Oct 12 13:51:55 linvdr user.info kernel: [ 100.408951] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
Oct 12 13:51:55 linvdr user.warn kernel: [ 100.429270] saa7146: unregister extension 'budget_ci dvb'.
Oct 12 13:51:55 linvdr user.warn kernel: [ 100.451545] saa7146: unregister extension 'budget dvb'.
Oct 12 13:51:55 linvdr user.warn kernel: [ 100.475824] saa7146: unregister extension 'dvb'.
Oct 12 13:51:55 linvdr user.info kernel: [ 100.511524] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
Oct 12 13:51:55 linvdr user.info kernel: [ 100.671786] ivtvfb: Unloading framebuffer module
Oct 12 13:51:56 linvdr user.info kernel: [ 101.344707] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
Oct 12 13:51:56 linvdr user.info kernel: [ 101.344938] ivtv0: Removed Hauppauge WinTV PVR-350, card #0
Oct 12 13:51:56 linvdr user.info kernel: [ 101.488801] usbcore: deregistering interface driver lirc_atiusb
Oct 12 13:51:56 linvdr user.warn kernel: [ 101.491956] lirc_atiusb[3]: usb remote disconnected
Oct 12 13:52:01 linvdr user.info kernel: [ 106.704322] ivtv: Start initialization, version 1.2.0
Oct 12 13:52:01 linvdr user.info kernel: [ 106.707669] ivtv0: Initializing card #0
Oct 12 13:52:01 linvdr user.info kernel: [ 106.707921] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:52:01 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760167] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760379] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760455] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760519] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760583] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760644] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760706] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:52:01 linvdr user.info kernel: [ 106.834397] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:52:01 linvdr user.info kernel: [ 106.996407] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.007957] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:52:01 linvdr user.info kernel:
Oct 12 13:52:01 linvdr user.info kernel: [ 107.029984] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.030221] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:52:01 linvdr user.info kernel: [ 107.045054] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.048275] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.051493] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.054757] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.057956] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:52:01 linvdr user.info kernel: [ 107.061190] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.064458] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.067644] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:52:01 linvdr user.info kernel: [ 107.068024] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.068108] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:52:01 linvdr user.info kernel: [ 107.068211] ivtv: End initialization
Oct 12 13:52:02 linvdr user.info kernel: [ 107.760068] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:52:02 linvdr user.info kernel: [ 107.791777] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:52:02 linvdr user.info kernel: [ 107.992242] ivtv0: Encoder revision: 0x02060039
Oct 12 13:52:02 linvdr user.info kernel: [ 107.992461] ivtv0: Decoder revision: 0x02020023
Oct 12 13:52:02 linvdr user.info kernel: [ 108.076221] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:52:02 linvdr user.info kernel: [ 108.280986] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:52:03 linvdr user.info kernel: [ 108.388901] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:52:03 linvdr user.warn kernel: [ 108.567411] saa7146: register extension 'dvb'.
Oct 12 13:52:03 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:52:03 linvdr user.warn kernel: found saa7146 @ mem f906e000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:52:03 linvdr user.info kernel: [ 108.595090] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:52:03 linvdr user.warn kernel: [ 108.718546] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.057645] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.057862] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.150590] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:52:03 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:52:03 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.188919] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:52:03 linvdr user.info kernel: [ 109.195276] input: DVB on-card IR receiver as /class/input/input4
Oct 12 13:52:03 linvdr user.info kernel: [ 109.195683] dvb-ttpci: found av7110-0.
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.233039] saa7146: register extension 'budget dvb'.
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.260633] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.282456] saa7146: register extension 'budget_av'.
Oct 12 13:52:03 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:52:03 linvdr user.warn kernel: found saa7146 @ mem f90d8000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.286075] saa7146 (1): dma buffer size 192512
Oct 12 13:52:03 linvdr user.info kernel: [ 109.286140] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:52:04 linvdr user.warn kernel: [ 109.427281] adapter failed MAC signature check
Oct 12 13:52:04 linvdr user.warn kernel: ff
Oct 12 13:52:04 linvdr user.info kernel: [ 109.667699] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:52:04 linvdr user.warn kernel: [ 109.787170] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:52:04 linvdr user.info kernel: [ 109.791361] budget-av: ci interface initialised.
Oct 12 13:52:04 linvdr user.info kernel: [ 109.827400] bttv: driver version 0.9.17 loaded
Oct 12 13:52:04 linvdr user.info kernel: [ 109.827620] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:52:04 linvdr user.info kernel: [ 109.833786] bttv: Bt8xx card found (0).
Oct 12 13:52:04 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:52:04 linvdr user.info kernel: [ 109.834131] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:52:04 linvdr user.info kernel: [ 109.834199] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:52:04 linvdr user.debug kernel: [ 109.834309] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:52:04 linvdr user.info kernel: [ 109.837399] bttv0: tuner absent
Oct 12 13:52:04 linvdr user.info kernel: [ 109.840687] bttv0: registered device video2
Oct 12 13:52:04 linvdr user.info kernel: [ 109.842347] bttv0: registered device vbi2
Oct 12 13:52:04 linvdr user.info kernel: ok
Oct 12 13:52:04 linvdr user.warn kernel: [ 109.853640] bttv0: add subdevice "dvb0"
Oct 12 13:52:04 linvdr user.info kernel: [ 109.856880] input: bttv IR (card=123) as /class/input/input5
Oct 12 13:52:04 linvdr user.info kernel: [ 109.887521] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:52:04 linvdr user.info kernel: [ 109.890737] bt878: Bt878 AUDIO function found (0).
Oct 12 13:52:04 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:52:04 linvdr user.info kernel: [ 109.891048] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:52:04 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:52:04 linvdr user.info kernel: [ 109.900334] DVB: registering new adapter (bttv0)
Oct 12 13:52:04 linvdr user.warn kernel: [ 109.960261] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:52:04 linvdr user.info kernel: [ 109.993168] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:52:04 linvdr user.info kernel: [ 110.001414] flexcop-pci: will use the HW PID filter.
Oct 12 13:52:04 linvdr user.info kernel: [ 110.001631] flexcop-pci: card revision 2
Oct 12 13:52:04 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:52:04 linvdr user.info kernel: [ 110.005349] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:52:04 linvdr user.info kernel: [ 110.016229] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:52:04 linvdr user.warn kernel: [ 110.019523] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:52:04 linvdr user.err kernel: [ 110.020064] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:52:04 linvdr user.err kernel: [ 110.220418] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:52:04 linvdr user.info kernel: [ 110.220726] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:52:04 linvdr user.warn kernel: [ 110.220803] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:52:04 linvdr user.info kernel: [ 110.223982] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:52:04 linvdr user.info kernel: [ 110.248706] i2c /dev entries driver
Oct 12 13:52:04 linvdr user.info kernel: [ 110.277296]
Oct 12 13:52:04 linvdr user.warn kernel: [ 110.277300] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:52:04 linvdr user.warn kernel: [ 110.277557] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:52:04 linvdr user.info kernel: [ 110.280173] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:52:05 linvdr user.warn kernel: [ 110.301073] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:52:05 linvdr user.info kernel: [ 110.317092] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:52:05 linvdr user.info vdr: [3643] VDR version 1.4.7-tt-ext40 started
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading /etc/vdr/setup.conf
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown config parameter: noEPG =
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading /etc/vdr/sources.conf
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading /etc/vdr/diseqc.conf
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading /etc/vdr/channels.conf
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown parameter key 'P'
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: error in /etc/vdr/channels.conf, line 16
Oct 12 13:52:05 linvdr user.info vdr: [3643] deleting plugin: tvonscreen
Oct 12 13:52:05 linvdr user.info vdr: [3643] deleting plugin: skinelchi
Oct 12 13:52:05 linvdr user.info vdr: [3643] deleting plugin: pvrinput
Oct 12 13:52:05 linvdr user.info vdr: [3643] deleting plugin: mplayer
Oct 12 13:52:05 linvdr user.info vdr: [3643] deleting plugin: femon
Oct 12 13:52:05 linvdr user.info vdr: [3643] deleting plugin: dvd
Oct 12 13:52:05 linvdr user.debug vdr: [3643] max. latency time 0 seconds
Oct 12 13:52:05 linvdr user.info vdr: [3643] exiting
Oct 12 13:53:07 linvdr user.info kernel: [ 172.769731] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
Oct 12 13:53:07 linvdr user.info kernel: [ 172.776452] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Oct 12 13:53:07 linvdr user.info kernel: [ 172.828585] bt878(0): unloading
Oct 12 13:53:07 linvdr user.debug kernel: [ 172.828790] bt878_mem: 0xf994a000.
Oct 12 13:53:07 linvdr user.info kernel: [ 172.828875] ACPI: PCI interrupt for device 0000:00:0d.1 disabled
Oct 12 13:53:07 linvdr user.warn kernel: [ 172.835635] bttv0: unloading
Oct 12 13:53:07 linvdr user.warn kernel: [ 172.903155] saa7146: unregister extension 'budget_av'.
Oct 12 13:53:07 linvdr user.info kernel: [ 173.144093] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
Oct 12 13:53:07 linvdr user.warn kernel: [ 173.164619] saa7146: unregister extension 'budget_ci dvb'.
Oct 12 13:53:07 linvdr user.warn kernel: [ 173.187249] saa7146: unregister extension 'budget dvb'.
Oct 12 13:53:07 linvdr user.warn kernel: [ 173.212044] saa7146: unregister extension 'dvb'.
Oct 12 13:53:07 linvdr user.info kernel: [ 173.247984] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
Oct 12 13:53:08 linvdr user.info kernel: [ 173.406827] ivtvfb: Unloading framebuffer module
Oct 12 13:53:08 linvdr user.info kernel: [ 174.079259] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
Oct 12 13:53:08 linvdr user.info kernel: [ 174.079521] ivtv0: Removed Hauppauge WinTV PVR-350, card #0
Oct 12 13:53:08 linvdr user.info kernel: [ 174.188380] usbcore: deregistering interface driver lirc_atiusb
Oct 12 13:53:08 linvdr user.warn kernel: [ 174.191616] lirc_atiusb[3]: usb remote disconnected
Oct 12 13:53:14 linvdr user.info kernel: [ 179.403319] ivtv: Start initialization, version 1.2.0
Oct 12 13:53:14 linvdr user.info kernel: [ 179.406672] ivtv0: Initializing card #0
Oct 12 13:53:14 linvdr user.info kernel: [ 179.406924] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:53:14 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462206] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462429] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462505] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462569] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462633] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462694] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462757] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:53:14 linvdr user.info kernel: [ 179.536211] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.699610] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.710706] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:53:14 linvdr user.info kernel:
Oct 12 13:53:14 linvdr user.info kernel: [ 179.731824] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.732062] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:53:14 linvdr user.info kernel: [ 179.746280] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.749546] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.752776] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.756016] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.759252] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:53:14 linvdr user.info kernel: [ 179.762499] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.765707] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.767435] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:53:14 linvdr user.info kernel: [ 179.767824] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.767910] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:53:14 linvdr user.info kernel: [ 179.768009] ivtv: End initialization
Oct 12 13:53:15 linvdr user.info kernel: [ 180.461322] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:53:15 linvdr user.info kernel: [ 180.490198] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:53:15 linvdr user.info kernel: [ 180.693301] ivtv0: Encoder revision: 0x02060039
Oct 12 13:53:15 linvdr user.info kernel: [ 180.693665] ivtv0: Decoder revision: 0x02020023
Oct 12 13:53:15 linvdr user.info kernel: [ 180.777363] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:53:15 linvdr user.info kernel: [ 180.982061] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:53:15 linvdr user.info kernel: [ 181.089954] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:53:15 linvdr user.warn kernel: [ 181.268575] saa7146: register extension 'dvb'.
Oct 12 13:53:15 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:53:15 linvdr user.warn kernel: found saa7146 @ mem f906e000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:53:16 linvdr user.info kernel: [ 181.295701] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.418606] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.754699] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.754916] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.847648] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:53:16 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:53:16 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.882981] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:53:16 linvdr user.info kernel: [ 181.884728] input: DVB on-card IR receiver as /class/input/input6
Oct 12 13:53:16 linvdr user.info kernel: [ 181.887737] dvb-ttpci: found av7110-0.
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.927108] saa7146: register extension 'budget dvb'.
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.954500] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.976082] saa7146: register extension 'budget_av'.
Oct 12 13:53:16 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:53:16 linvdr user.warn kernel: found saa7146 @ mem f90d8000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.979679] saa7146 (1): dma buffer size 192512
Oct 12 13:53:16 linvdr user.info kernel: [ 181.979743] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:53:16 linvdr user.warn kernel: [ 182.120341] adapter failed MAC signature check
Oct 12 13:53:16 linvdr user.warn kernel: ff
Oct 12 13:53:17 linvdr user.info kernel: [ 182.360754] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.480231] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:53:17 linvdr user.info kernel: [ 182.484452] budget-av: ci interface initialised.
Oct 12 13:53:17 linvdr user.info kernel: [ 182.520469] bttv: driver version 0.9.17 loaded
Oct 12 13:53:17 linvdr user.info kernel: [ 182.520683] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:53:17 linvdr user.info kernel: [ 182.526706] bttv: Bt8xx card found (0).
Oct 12 13:53:17 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:53:17 linvdr user.info kernel: [ 182.527034] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:53:17 linvdr user.info kernel: [ 182.527103] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:53:17 linvdr user.debug kernel: [ 182.527200] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:53:17 linvdr user.info kernel: [ 182.530262] bttv0: tuner absent
Oct 12 13:53:17 linvdr user.info kernel: [ 182.533439] bttv0: registered device video2
Oct 12 13:53:17 linvdr user.info kernel: [ 182.536692] bttv0: registered device vbi2
Oct 12 13:53:17 linvdr user.info kernel: ok
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.547565] bttv0: add subdevice "dvb0"
Oct 12 13:53:17 linvdr user.info kernel: [ 182.550765] input: bttv IR (card=123) as /class/input/input7
Oct 12 13:53:17 linvdr user.info kernel: [ 182.580225] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:53:17 linvdr user.info kernel: [ 182.583482] bt878: Bt878 AUDIO function found (0).
Oct 12 13:53:17 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:53:17 linvdr user.info kernel: [ 182.583796] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:53:17 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:53:17 linvdr user.info kernel: [ 182.591392] DVB: registering new adapter (bttv0)
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.650725] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:53:17 linvdr user.info kernel: [ 182.685681] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:53:17 linvdr user.info kernel: [ 182.693832] flexcop-pci: will use the HW PID filter.
Oct 12 13:53:17 linvdr user.info kernel: [ 182.694049] flexcop-pci: card revision 2
Oct 12 13:53:17 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:53:17 linvdr user.info kernel: [ 182.697421] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:53:17 linvdr user.info kernel: [ 182.708115] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.711363] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:53:17 linvdr user.err kernel: [ 182.711885] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:53:17 linvdr user.err kernel: [ 182.912473] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:53:17 linvdr user.info kernel: [ 182.912764] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.912840] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:53:17 linvdr user.info kernel: [ 182.915919] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:53:17 linvdr user.info kernel: [ 182.940757] i2c /dev entries driver
Oct 12 13:53:17 linvdr user.info kernel: [ 182.967364]
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.967366] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.967618] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:53:17 linvdr user.info kernel: [ 182.971551] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.993144] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:53:17 linvdr user.info kernel: [ 183.004172] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:53:17 linvdr user.info vdr: [4172] VDR version 1.4.7-tt-ext40 started
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading /etc/vdr/setup.conf
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown config parameter: noEPG =
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading /etc/vdr/sources.conf
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading /etc/vdr/diseqc.conf
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading /etc/vdr/channels.conf
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown parameter key 'P'
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: error in /etc/vdr/channels.conf, line 15
Oct 12 13:53:17 linvdr user.info vdr: [4172] deleting plugin: tvonscreen
Oct 12 13:53:17 linvdr user.info vdr: [4172] deleting plugin: skinelchi
Oct 12 13:53:17 linvdr user.info vdr: [4172] deleting plugin: pvrinput
Oct 12 13:53:17 linvdr user.info vdr: [4172] deleting plugin: mplayer
Oct 12 13:53:17 linvdr user.info vdr: [4172] deleting plugin: femon
Oct 12 13:53:17 linvdr user.info vdr: [4172] deleting plugin: dvd
Oct 12 13:53:17 linvdr user.debug vdr: [4172] max. latency time 0 seconds
Oct 12 13:53:17 linvdr user.info vdr: [4172] exiting
Oct 12 13:53:18 linvdr auth.info PAM_unix[3110]: (ssh) session closed for user root
Oct 12 13:53:18 linvdr auth.err sshd[3110]: PAM pam_putenv: delete non-existent entry; MAIL
Oct 12 13:53:18 linvdr auth.err PAM-env[3110]: Unable to open config file: No such file or directory
Oct 12 13:53:18 linvdr auth.info PAM_unix[3127]: (ssh) session closed for user root
Oct 12 13:53:18 linvdr auth.err sshd[3127]: PAM pam_putenv: delete non-existent entry; MAIL
Oct 12 13:53:18 linvdr auth.err PAM-env[3127]: Unable to open config file: No such file or directory
Oct 12 13:54:07 linvdr daemon.info init: ^MStarting pid 4195, console /dev/console: '/etc/init.d/rcShutdown'
Oct 12 13:54:08 linvdr user.info kernel: [ 234.024912] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
Oct 12 13:54:08 linvdr user.info kernel: [ 234.031501] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Oct 12 13:54:08 linvdr user.info kernel: [ 234.083550] bt878(0): unloading
Oct 12 13:54:08 linvdr user.debug kernel: [ 234.083758] bt878_mem: 0xf994a000.
Oct 12 13:54:08 linvdr user.info kernel: [ 234.083842] ACPI: PCI interrupt for device 0000:00:0d.1 disabled
Oct 12 13:54:08 linvdr user.warn kernel: [ 234.089649] bttv0: unloading
Oct 12 13:54:08 linvdr user.warn kernel: [ 234.157949] saa7146: unregister extension 'budget_av'.
Oct 12 13:54:08 linvdr user.info kernel: [ 234.226934] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
Oct 12 13:54:08 linvdr user.warn kernel: [ 234.247332] saa7146: unregister extension 'budget_ci dvb'.
Oct 12 13:54:09 linvdr user.warn kernel: [ 234.269897] saa7146: unregister extension 'budget dvb'.
Oct 12 13:54:09 linvdr user.warn kernel: [ 234.294286] saa7146: unregister extension 'dvb'.
Oct 12 13:54:09 linvdr user.info kernel: [ 234.329387] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
Oct 12 13:54:09 linvdr user.info kernel: [ 234.488869] ivtvfb: Unloading framebuffer module
Oct 12 13:54:09 linvdr user.info kernel: [ 235.159104] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
Oct 12 13:54:09 linvdr user.info kernel: [ 235.159316] ivtv0: Removed Hauppauge WinTV PVR-350, card #0
Oct 12 13:54:10 linvdr user.info kernel: [ 235.271290] usbcore: deregistering interface driver lirc_atiusb
Oct 12 13:54:10 linvdr user.warn kernel: [ 235.274478] lirc_atiusb[3]: usb remote disconnected
Oct 12 13:54:53 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:53 linvdr user.info kernel: [ 31.303013] ata2: EH complete
Oct 12 13:54:53 linvdr user.info kernel: [ 31.317564] ata1: EH pending after completion, repeating EH (cnt=4)
Oct 12 13:54:53 linvdr user.info kernel: [ 31.317590] ata1: soft resetting port
Oct 12 13:54:53 linvdr user.info kernel: [ 31.357716] ata2: soft resetting port
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 2 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:53 linvdr user.info kernel: [ 31.478948] ata1: EH complete
Oct 12 13:54:53 linvdr user.info kernel: [ 31.518945] ata2: EH pending after completion, repeating EH (cnt=4)
Oct 12 13:54:53 linvdr user.info kernel: [ 31.518966] ata2: soft resetting port
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 2 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 3 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 4 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 3 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:53 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 5 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 4 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:53 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:53 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 5 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 6 0 ...
Oct 12 13:54:54 linvdr user.info kernel: [ 31.679914] ata2: EH complete
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 0 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 0 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.info kernel: [ 31.914591] ata2: soft resetting port
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.info kernel: [ 32.075750] ata2: EH pending after completion, repeating EH (cnt=4)
Oct 12 13:54:54 linvdr user.info kernel: [ 32.075771] ata2: soft resetting port
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:54 linvdr user.info kernel: [ 32.236921] ata2: EH complete
Oct 12 13:54:54 linvdr user.info kernel: [ 32.245744] ata2: soft resetting port
Oct 12 13:54:54 linvdr user.info kernel: [ 32.406621] ata2: EH complete
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:54 linvdr user.info kernel: [ 32.436159] ata2: soft resetting port
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.info kernel: [ 32.568654] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Oct 12 13:54:54 linvdr user.info kernel: GSI 23 (level, low) -> IRQ 19
Oct 12 13:54:54 linvdr user.info kernel: f9, IRQ 19.
Oct 12 13:54:54 linvdr user.info kernel: [ 32.573131] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Oct 12 13:54:54 linvdr user.info kernel: [ 32.597590] ata2: EH complete
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.info kernel: [ 32.616339] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:55 linvdr user.info kernel: [ 32.864344] Linux video capture interface: v2.00
Oct 12 13:54:55 linvdr auth.info sshd[2774]: Server listening on 0.0.0.0 port 22.
Oct 12 13:54:55 linvdr user.info kernel: [ 33.234184] ivtv: Start initialization, version 1.2.0
Oct 12 13:54:55 linvdr user.info kernel: [ 33.234486] ivtv0: Initializing card #0
Oct 12 13:54:55 linvdr user.info kernel: [ 33.234493] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:54:55 linvdr user.warn kernel: [ 33.234750] PCI: Enabling device 0000:00:0c.0 (0014 -> 0016)
Oct 12 13:54:55 linvdr user.info kernel: [ 33.234766] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 19 (level, low) -> IRQ 20
Oct 12 13:54:55 linvdr user.info kernel: [ 33.234780] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Oct 12 13:54:55 linvdr daemon.info init: ^MStarting pid 2798, console /dev/tty1: '/sbin/getty'
Oct 12 13:54:55 linvdr daemon.info init: ^MStarting pid 2799, console /dev/tty2: '/sbin/getty'
Oct 12 13:54:55 linvdr daemon.info init: ^MStarting pid 2802, console /dev/tty3: '/sbin/getty'
Oct 12 13:54:55 linvdr daemon.info init: ^MStarting pid 2805, console /dev/tty4: '/sbin/getty'
Oct 12 13:54:55 linvdr user.info kernel: [ 33.413683] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:54:55 linvdr user.info kernel: [ 33.413924] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:54:55 linvdr user.info kernel: [ 33.413993] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:54:55 linvdr user.info kernel: [ 33.414055] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:54:55 linvdr user.info kernel: [ 33.414131] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:54:55 linvdr user.info kernel: [ 33.414193] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:54:55 linvdr user.info kernel: [ 33.414255] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:54:55 linvdr user.info kernel: [ 33.658392] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.812716] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.823828] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:54:56 linvdr user.info kernel:
Oct 12 13:54:56 linvdr user.info kernel: [ 33.844939] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.845172] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:54:56 linvdr user.info kernel: [ 33.859307] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.862511] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.865701] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.868925] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.872119] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:54:56 linvdr user.info kernel: [ 33.875320] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.878562] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.881747] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:54:56 linvdr user.info kernel: [ 33.882122] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.882206] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:54:56 linvdr user.info kernel: [ 33.882304] ivtv: End initialization
Oct 12 13:54:56 linvdr user.info kernel: [ 34.615537] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:54:56 linvdr user.info kernel: [ 34.663865] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:54:57 linvdr user.info kernel: [ 34.866387] ivtv0: Encoder revision: 0x02060039
Oct 12 13:54:57 linvdr user.info kernel: [ 34.866753] ivtv0: Decoder revision: 0x02020023
Oct 12 13:54:57 linvdr user.info kernel: [ 34.961816] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:54:57 linvdr user.info kernel: [ 35.163136] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:54:57 linvdr user.info kernel: [ 35.271056] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:54:57 linvdr user.warn kernel: [ 35.528964] saa7146: register extension 'dvb'.
Oct 12 13:54:57 linvdr user.warn kernel: [ 35.532081] PCI: Enabling device 0000:00:0e.0 (0004 -> 0006)
Oct 12 13:54:57 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:54:57 linvdr user.warn kernel: found saa7146 @ mem f90ec000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:54:57 linvdr user.info kernel: [ 35.575840] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:54:58 linvdr user.warn kernel: [ 35.714654] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.050754] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.050968] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.143700] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:54:58 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:54:58 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.182031] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:54:58 linvdr user.info kernel: [ 36.188026] input: DVB on-card IR receiver as /class/input/input2
Oct 12 13:54:58 linvdr user.info kernel: [ 36.191188] dvb-ttpci: found av7110-0.
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.225969] saa7146: register extension 'budget dvb'.
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.263970] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.285794] saa7146: register extension 'budget_av'.
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.288959] PCI: Enabling device 0000:00:0a.0 (0004 -> 0006)
Oct 12 13:54:58 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:54:58 linvdr user.warn kernel: found saa7146 @ mem f9918000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.289397] saa7146 (1): dma buffer size 192512
Oct 12 13:54:58 linvdr user.info kernel: [ 36.289458] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.430387] adapter failed MAC signature check
Oct 12 13:54:58 linvdr user.warn kernel: ff
Oct 12 13:54:58 linvdr user.info kernel: [ 36.670804] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:54:59 linvdr user.warn kernel: [ 36.827266] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:54:59 linvdr user.info kernel: [ 36.833418] budget-av: ci interface initialised.
Oct 12 13:54:59 linvdr user.info kernel: [ 36.886200] bttv: driver version 0.9.17 loaded
Oct 12 13:54:59 linvdr user.info kernel: [ 36.886428] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:54:59 linvdr user.info kernel: [ 36.892393] bttv: Bt8xx card found (0).
Oct 12 13:54:59 linvdr user.warn kernel: [ 36.892626] PCI: Enabling device 0000:00:0d.0 (0004 -> 0006)
Oct 12 13:54:59 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:54:59 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:54:59 linvdr user.info kernel: [ 36.892871] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:54:59 linvdr user.info kernel: [ 36.892938] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:54:59 linvdr user.debug kernel: [ 36.893034] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:54:59 linvdr user.info kernel: [ 36.896086] bttv0: tuner absent
Oct 12 13:54:59 linvdr user.info kernel: [ 36.899320] bttv0: registered device video2
Oct 12 13:54:59 linvdr user.info kernel: [ 36.902510] bttv0: registered device vbi2
Oct 12 13:54:59 linvdr user.info kernel: ok
Oct 12 13:54:59 linvdr user.warn kernel: [ 36.927349] bttv0: add subdevice "dvb0"
Oct 12 13:54:59 linvdr user.info kernel: [ 36.938498] input: bttv IR (card=123) as /class/input/input3
Oct 12 13:54:59 linvdr user.info kernel: [ 36.961444] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:54:59 linvdr user.info kernel: [ 36.961851] bt878: Bt878 AUDIO function found (0).
Oct 12 13:54:59 linvdr user.warn kernel: [ 36.961953] PCI: Enabling device 0000:00:0d.1 (0004 -> 0006)
Oct 12 13:54:59 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:54:59 linvdr user.info kernel: [ 36.962095] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:54:59 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:54:59 linvdr user.info kernel: [ 36.968250] DVB: registering new adapter (bttv0)
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.029636] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:54:59 linvdr user.info kernel: [ 37.070535] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:54:59 linvdr user.info kernel: [ 37.078876] flexcop-pci: will use the HW PID filter.
Oct 12 13:54:59 linvdr user.info kernel: [ 37.079086] flexcop-pci: card revision 2
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.079156] PCI: Enabling device 0000:00:0b.0 (0004 -> 0007)
Oct 12 13:54:59 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:54:59 linvdr user.info kernel: [ 37.083421] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:54:59 linvdr user.info kernel: [ 37.093975] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.097165] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:54:59 linvdr user.err kernel: [ 37.097694] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:54:59 linvdr user.err kernel: [ 37.298501] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:54:59 linvdr user.info kernel: [ 37.298807] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.298884] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:54:59 linvdr user.info kernel: [ 37.301932] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:54:59 linvdr user.info kernel: [ 37.351321] i2c /dev entries driver
Oct 12 13:54:59 linvdr user.info kernel: [ 37.411206] lirc_dev: IR Remote Control driver registered, major 61
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.412955] lirc_atiusb: no version for "lirc_unregister_plugin" found: kernel tainted.
Oct 12 13:54:59 linvdr user.info kernel: [ 37.416647]
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.416651] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.416908] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:54:59 linvdr user.info kernel: [ 37.421619] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.443325] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:54:59 linvdr user.info kernel: [ 37.453348] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:55:00 linvdr user.info vdr: [3076] VDR version 1.4.7-tt-ext40 started
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading /etc/vdr/setup.conf
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown config parameter: noEPG =
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading /etc/vdr/sources.conf
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading /etc/vdr/diseqc.conf
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading /etc/vdr/channels.conf
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown parameter key 'P'
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: error in /etc/vdr/channels.conf, line 15
Oct 12 13:55:00 linvdr user.info vdr: [3076] deleting plugin: tvonscreen
Oct 12 13:55:00 linvdr user.info vdr: [3076] deleting plugin: skinelchi
Oct 12 13:55:00 linvdr user.info vdr: [3076] deleting plugin: pvrinput
Oct 12 13:55:00 linvdr user.info vdr: [3076] deleting plugin: mplayer
Oct 12 13:55:00 linvdr user.info vdr: [3076] deleting plugin: femon
Oct 12 13:55:00 linvdr user.info vdr: [3076] deleting plugin: dvd
Oct 12 13:55:00 linvdr user.debug vdr: [3076] max. latency time 0 seconds
Oct 12 13:55:00 linvdr user.info vdr: [3076] exiting
Oct 12 13:55:19 linvdr auth.info sshd[3093]: Could not reverse map address 192.168.1.8.
Oct 12 13:55:19 linvdr auth.info sshd[3093]: Accepted password for root from 192.168.1.8 port 2983 ssh2
Oct 12 13:55:19 linvdr auth.info PAM_unix[3093]: (ssh) session opened for user root by (uid=0)
Oct 12 13:55:19 linvdr auth.err PAM-env[3093]: Unable to open config file: No such file or directory
Oct 12 13:55:19 linvdr auth.err PAM-env[3094]: Unable to open config file: No such file or directory
Oct 12 13:55:26 linvdr cron.notice crond[3114]: crond 2.3.2 dillon, started, log level 8
Oct 12 13:56:02 linvdr auth.info sshd[3121]: Could not reverse map address 192.168.1.8.
Oct 12 13:56:03 linvdr user.info kernel: [ 100.816759] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
Oct 12 13:56:03 linvdr user.info kernel: [ 100.823271] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Oct 12 13:56:03 linvdr user.info kernel: [ 100.875489] bt878(0): unloading
Oct 12 13:56:03 linvdr user.debug kernel: [ 100.875726] bt878_mem: 0xf9044000.
Oct 12 13:56:03 linvdr user.info kernel: [ 100.875808] ACPI: PCI interrupt for device 0000:00:0d.1 disabled
Oct 12 13:56:03 linvdr user.warn kernel: [ 100.882064] bttv0: unloading
Oct 12 13:56:03 linvdr user.warn kernel: [ 100.948743] saa7146: unregister extension 'budget_av'.
Oct 12 13:56:03 linvdr user.info kernel: [ 100.966726] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
Oct 12 13:56:03 linvdr user.warn kernel: [ 100.987621] saa7146: unregister extension 'budget_ci dvb'.
Oct 12 13:56:03 linvdr user.warn kernel: [ 101.009939] saa7146: unregister extension 'budget dvb'.
Oct 12 13:56:03 linvdr user.warn kernel: [ 101.034383] saa7146: unregister extension 'dvb'.
Oct 12 13:56:03 linvdr user.info kernel: [ 101.066735] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
Oct 12 13:56:03 linvdr user.info kernel: [ 101.225867] ivtvfb: Unloading framebuffer module
Oct 12 13:56:04 linvdr user.info kernel: [ 101.896581] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
Oct 12 13:56:04 linvdr user.info kernel: [ 101.896832] ivtv0: Removed Hauppauge WinTV PVR-350, card #0
Oct 12 13:56:04 linvdr user.info kernel: [ 102.030935] usbcore: deregistering interface driver lirc_atiusb
Oct 12 13:56:04 linvdr user.warn kernel: [ 102.034102] lirc_atiusb[3]: usb remote disconnected
Oct 12 13:56:06 linvdr auth.notice PAM_unix[3121]: authentication failure; (uid=0) -> root for ssh service
Oct 12 13:56:07 linvdr auth.info sshd[3121]: Failed password for root from 192.168.1.8 port 2984 ssh2
Oct 12 13:56:09 linvdr user.info kernel: [ 107.247652] ivtv: Start initialization, version 1.2.0
Oct 12 13:56:09 linvdr user.info kernel: [ 107.250991] ivtv0: Initializing card #0
Oct 12 13:56:09 linvdr user.info kernel: [ 107.251243] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:56:09 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306177] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306386] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306454] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306518] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306580] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306641] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306704] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:56:09 linvdr user.info kernel: [ 107.380837] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.534973] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.546548] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:56:09 linvdr user.info kernel:
Oct 12 13:56:09 linvdr user.info kernel: [ 107.568583] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.568816] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:56:09 linvdr user.info kernel: [ 107.583624] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.586804] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.589984] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.593132] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.596376] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:56:09 linvdr user.info kernel: [ 107.599548] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.602741] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.604227] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:56:09 linvdr user.info kernel: [ 107.604597] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.604679] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:56:09 linvdr user.info kernel: [ 107.604778] ivtv: End initialization
Oct 12 13:56:10 linvdr user.info kernel: [ 108.297736] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:56:10 linvdr user.info kernel: [ 108.326965] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:56:10 linvdr user.info kernel: [ 108.529100] ivtv0: Encoder revision: 0x02060039
Oct 12 13:56:10 linvdr user.info kernel: [ 108.529450] ivtv0: Decoder revision: 0x02020023
Oct 12 13:56:10 linvdr user.info kernel: [ 108.612936] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:56:11 linvdr user.info kernel: [ 108.814858] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:56:11 linvdr user.info kernel: [ 108.922759] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:56:11 linvdr user.warn kernel: [ 109.099252] saa7146: register extension 'dvb'.
Oct 12 13:56:11 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:56:11 linvdr user.warn kernel: found saa7146 @ mem f906e000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:56:11 linvdr user.info kernel: [ 109.126401] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:56:11 linvdr user.warn kernel: [ 109.250405] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:56:11 linvdr user.warn kernel: [ 109.586497] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:56:11 linvdr user.warn kernel: [ 109.586709] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.679444] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:56:12 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:56:12 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.717791] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:56:12 linvdr user.info kernel: [ 109.723959] input: DVB on-card IR receiver as /class/input/input4
Oct 12 13:56:12 linvdr user.info kernel: [ 109.727174] dvb-ttpci: found av7110-0.
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.761172] saa7146: register extension 'budget dvb'.
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.788663] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.810239] saa7146: register extension 'budget_av'.
Oct 12 13:56:12 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:56:12 linvdr user.warn kernel: found saa7146 @ mem f90d8000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.813824] saa7146 (1): dma buffer size 192512
Oct 12 13:56:12 linvdr user.info kernel: [ 109.813887] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.955139] adapter failed MAC signature check
Oct 12 13:56:12 linvdr user.warn kernel: ff
Oct 12 13:56:12 linvdr auth.info sshd[3121]: Failed password for root from 192.168.1.8 port 2984 ssh2
Oct 12 13:56:12 linvdr user.info kernel: [ 110.195554] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:56:12 linvdr user.warn kernel: [ 110.315023] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:56:12 linvdr user.info kernel: [ 110.321136] budget-av: ci interface initialised.
Oct 12 13:56:12 linvdr user.info kernel: [ 110.354748] bttv: driver version 0.9.17 loaded
Oct 12 13:56:12 linvdr user.info kernel: [ 110.354962] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:56:12 linvdr user.info kernel: [ 110.360947] bttv: Bt8xx card found (0).
Oct 12 13:56:12 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:56:12 linvdr user.info kernel: [ 110.361297] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:56:12 linvdr user.info kernel: [ 110.361366] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:56:12 linvdr user.debug kernel: [ 110.361462] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:56:12 linvdr user.info kernel: [ 110.364545] bttv0: tuner absent
Oct 12 13:56:12 linvdr user.info kernel: [ 110.367724] bttv0: registered device video2
Oct 12 13:56:12 linvdr user.info kernel: [ 110.370917] bttv0: registered device vbi2
Oct 12 13:56:12 linvdr user.info kernel: ok
Oct 12 13:56:12 linvdr user.warn kernel: [ 110.385171] bttv0: add subdevice "dvb0"
Oct 12 13:56:12 linvdr user.info kernel: [ 110.400038] input: bttv IR (card=123) as /class/input/input5
Oct 12 13:56:12 linvdr user.info kernel: [ 110.411391] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:56:12 linvdr user.info kernel: [ 110.413222] bt878: Bt878 AUDIO function found (0).
Oct 12 13:56:12 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:56:12 linvdr user.info kernel: [ 110.413539] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:56:12 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:56:12 linvdr user.info kernel: [ 110.428190] DVB: registering new adapter (bttv0)
Oct 12 13:56:12 linvdr user.warn kernel: [ 110.487377] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:56:12 linvdr user.info kernel: [ 110.522265] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:56:12 linvdr user.info kernel: [ 110.530256] flexcop-pci: will use the HW PID filter.
Oct 12 13:56:12 linvdr user.info kernel: [ 110.530470] flexcop-pci: card revision 2
Oct 12 13:56:12 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:56:12 linvdr user.info kernel: [ 110.534221] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:56:12 linvdr user.info kernel: [ 110.544864] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:56:12 linvdr user.warn kernel: [ 110.548039] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:56:12 linvdr user.err kernel: [ 110.548575] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:56:13 linvdr user.err kernel: [ 110.749272] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:56:13 linvdr user.info kernel: [ 110.749608] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:56:13 linvdr user.warn kernel: [ 110.749689] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:56:13 linvdr user.info kernel: [ 110.752841] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:56:13 linvdr user.info kernel: [ 110.777380] i2c /dev entries driver
Oct 12 13:56:13 linvdr user.info kernel: [ 110.804187]
Oct 12 13:56:13 linvdr user.warn kernel: [ 110.804191] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:56:13 linvdr user.warn kernel: [ 110.804457] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:56:13 linvdr user.info kernel: [ 110.807653] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:56:13 linvdr user.warn kernel: [ 110.827855] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:56:13 linvdr user.info kernel: [ 110.843883] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:56:13 linvdr user.info vdr: [3622] VDR version 1.4.7-tt-ext40 started
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading /etc/vdr/setup.conf
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown config parameter: noEPG =
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading /etc/vdr/sources.conf
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading /etc/vdr/diseqc.conf
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading /etc/vdr/channels.conf
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown parameter key 'P'
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: error in /etc/vdr/channels.conf, line 15
Oct 12 13:56:13 linvdr user.info vdr: [3622] deleting plugin: tvonscreen
Oct 12 13:56:13 linvdr user.info vdr: [3622] deleting plugin: skinelchi
Oct 12 13:56:13 linvdr user.info vdr: [3622] deleting plugin: pvrinput
Oct 12 13:56:13 linvdr user.info vdr: [3622] deleting plugin: mplayer
Oct 12 13:56:13 linvdr user.info vdr: [3622] deleting plugin: femon
Oct 12 13:56:13 linvdr user.info vdr: [3622] deleting plugin: dvd
Oct 12 13:56:13 linvdr user.debug vdr: [3622] max. latency time 0 seconds
Oct 12 13:56:13 linvdr user.info vdr: [3622] exiting
Oct 12 13:56:14 linvdr auth.info sshd[3121]: Accepted password for root from 192.168.1.8 port 2984 ssh2
Oct 12 13:56:14 linvdr auth.info PAM_unix[3121]: (ssh) session opened for user root by (uid=0)
Oct 12 13:56:14 linvdr auth.err PAM-env[3121]: Unable to open config file: No such file or directory
Oct 12 13:56:14 linvdr auth.err PAM-env[3637]: Unable to open config file: No such file or directory
Oct 12 13:57:09 linvdr user.info kernel: [ 166.938458] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
Oct 12 13:57:09 linvdr user.info kernel: [ 166.945041] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Oct 12 13:57:09 linvdr user.info kernel: [ 166.997080] bt878(0): unloading
Oct 12 13:57:09 linvdr user.debug kernel: [ 166.997313] bt878_mem: 0xf994a000.
Oct 12 13:57:09 linvdr user.info kernel: [ 166.997397] ACPI: PCI interrupt for device 0000:00:0d.1 disabled
Oct 12 13:57:09 linvdr user.warn kernel: [ 167.003734] bttv0: unloading
Oct 12 13:57:09 linvdr user.warn kernel: [ 167.071067] saa7146: unregister extension 'budget_av'.
Oct 12 13:57:09 linvdr user.info kernel: [ 167.088227] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
Oct 12 13:57:09 linvdr user.warn kernel: [ 167.110037] saa7146: unregister extension 'budget_ci dvb'.
Oct 12 13:57:09 linvdr user.warn kernel: [ 167.132728] saa7146: unregister extension 'budget dvb'.
Oct 12 13:57:09 linvdr user.warn kernel: [ 167.157269] saa7146: unregister extension 'dvb'.
Oct 12 13:57:09 linvdr user.info kernel: [ 167.193628] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
Oct 12 13:57:09 linvdr user.info kernel: [ 167.351755] ivtvfb: Unloading framebuffer module
Oct 12 13:57:10 linvdr user.info kernel: [ 168.023052] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
Oct 12 13:57:10 linvdr user.info kernel: [ 168.023288] ivtv0: Removed Hauppauge WinTV PVR-350, card #0
Oct 12 13:57:10 linvdr user.info kernel: [ 168.134554] usbcore: deregistering interface driver lirc_atiusb
Oct 12 13:57:10 linvdr user.warn kernel: [ 168.137833] lirc_atiusb[3]: usb remote disconnected
Oct 12 13:57:14 linvdr user.info kernel: [ 172.518681] ivtv: Start initialization, version 1.2.0
Oct 12 13:57:14 linvdr user.info kernel: [ 172.522050] ivtv0: Initializing card #0
Oct 12 13:57:14 linvdr user.info kernel: [ 172.522327] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:57:14 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:57:14 linvdr user.info kernel: [ 172.577565] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:57:14 linvdr user.info kernel: [ 172.577772] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:57:14 linvdr user.info kernel: [ 172.577839] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:57:14 linvdr user.info kernel: [ 172.577902] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:57:14 linvdr user.info kernel: [ 172.577963] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:57:14 linvdr user.info kernel: [ 172.578024] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:57:14 linvdr user.info kernel: [ 172.578092] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:57:15 linvdr user.info kernel: [ 172.652753] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.807240] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.818840] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:57:15 linvdr user.info kernel:
Oct 12 13:57:15 linvdr user.info kernel: [ 172.840936] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.841180] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:57:15 linvdr user.info kernel: [ 172.855962] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.859239] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.862433] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.865660] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.868870] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:57:15 linvdr user.info kernel: [ 172.872154] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.875383] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.878605] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:57:15 linvdr user.info kernel: [ 172.879010] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.879094] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:57:15 linvdr user.info kernel: [ 172.879193] ivtv: End initialization
Oct 12 13:57:15 linvdr user.info kernel: [ 173.568732] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:57:15 linvdr user.info kernel: [ 173.603477] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:57:16 linvdr user.info kernel: [ 173.803890] ivtv0: Encoder revision: 0x02060039
Oct 12 13:57:16 linvdr user.info kernel: [ 173.804131] ivtv0: Decoder revision: 0x02020023
Oct 12 13:57:16 linvdr user.info kernel: [ 173.887859] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:57:16 linvdr user.info kernel: [ 174.088662] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:57:16 linvdr user.info kernel: [ 174.196560] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:57:16 linvdr user.warn kernel: [ 174.374306] saa7146: register extension 'dvb'.
Oct 12 13:57:16 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:57:16 linvdr user.warn kernel: found saa7146 @ mem f906e000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:57:16 linvdr user.info kernel: [ 174.401760] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:57:16 linvdr user.warn kernel: [ 174.525204] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:57:17 linvdr user.warn kernel: [ 174.861303] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:57:17 linvdr user.warn kernel: [ 174.861538] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:57:17 linvdr user.warn kernel: [ 174.954250] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:57:17 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:57:17 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:57:17 linvdr user.warn kernel: [ 174.992590] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:57:17 linvdr user.info kernel: [ 174.998829] input: DVB on-card IR receiver as /class/input/input6
Oct 12 13:57:17 linvdr user.info kernel: [ 175.002113] dvb-ttpci: found av7110-0.
Oct 12 13:57:17 linvdr user.warn kernel: [ 175.036527] saa7146: register extension 'budget dvb'.
Oct 12 13:57:17 linvdr user.warn kernel: [ 175.064184] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:57:17 linvdr user.warn kernel: [ 175.085992] saa7146: register extension 'budget_av'.
Oct 12 13:57:17 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:57:17 linvdr user.warn kernel: found saa7146 @ mem f90d8000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:57:17 linvdr user.warn kernel: [ 175.089589] saa7146 (1): dma buffer size 192512
Oct 12 13:57:17 linvdr user.info kernel: [ 175.089653] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:57:17 linvdr user.warn kernel: [ 175.230947] adapter failed MAC signature check
Oct 12 13:57:17 linvdr user.warn kernel: ff
Oct 12 13:57:17 linvdr user.info kernel: [ 175.471360] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:57:17 linvdr user.warn kernel: [ 175.590830] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:57:17 linvdr user.info kernel: [ 175.597055] budget-av: ci interface initialised.
Oct 12 13:57:18 linvdr user.info kernel: [ 175.630889] bttv: driver version 0.9.17 loaded
Oct 12 13:57:18 linvdr user.info kernel: [ 175.631136] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:57:18 linvdr user.info kernel: [ 175.637114] bttv: Bt8xx card found (0).
Oct 12 13:57:18 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:57:18 linvdr user.info kernel: [ 175.637446] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:57:18 linvdr user.info kernel: [ 175.637514] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:57:18 linvdr user.debug kernel: [ 175.637610] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:57:18 linvdr user.info kernel: [ 175.640025] bttv0: tuner absent
Oct 12 13:57:18 linvdr user.info kernel: [ 175.643276] bttv0: registered device video2
Oct 12 13:57:18 linvdr user.info kernel: [ 175.646996] bttv0: registered device vbi2
Oct 12 13:57:18 linvdr user.info kernel: ok
Oct 12 13:57:18 linvdr user.warn kernel: [ 175.658201] bttv0: add subdevice "dvb0"
Oct 12 13:57:18 linvdr user.info kernel: [ 175.660147] input: bttv IR (card=123) as /class/input/input7
Oct 12 13:57:18 linvdr user.info kernel: [ 175.693831] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:57:18 linvdr user.info kernel: [ 175.694203] bt878: Bt878 AUDIO function found (0).
Oct 12 13:57:18 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:57:18 linvdr user.info kernel: [ 175.694379] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:57:18 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:57:18 linvdr user.info kernel: [ 175.705960] DVB: registering new adapter (bttv0)
Oct 12 13:57:18 linvdr user.warn kernel: [ 175.763420] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:57:18 linvdr user.info kernel: [ 175.797125] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:57:18 linvdr user.info kernel: [ 175.805143] flexcop-pci: will use the HW PID filter.
Oct 12 13:57:18 linvdr user.info kernel: [ 175.805355] flexcop-pci: card revision 2
Oct 12 13:57:18 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:57:18 linvdr user.info kernel: [ 175.809008] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:57:18 linvdr user.info kernel: [ 175.819641] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:57:18 linvdr user.warn kernel: [ 175.822833] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:57:18 linvdr user.err kernel: [ 175.823366] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:57:18 linvdr user.err kernel: [ 176.024075] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:57:18 linvdr user.info kernel: [ 176.024380] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:57:18 linvdr user.warn kernel: [ 176.024456] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:57:18 linvdr user.info kernel: [ 176.027498] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:57:18 linvdr user.info kernel: [ 176.051985] i2c /dev entries driver
Oct 12 13:57:18 linvdr user.info kernel: [ 176.078967]
Oct 12 13:57:18 linvdr user.warn kernel: [ 176.078971] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:57:18 linvdr user.warn kernel: [ 176.079240] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:57:18 linvdr user.info kernel: [ 176.082572] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:57:18 linvdr user.warn kernel: [ 176.104733] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:57:18 linvdr user.info kernel: [ 176.120752] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:57:18 linvdr user.info vdr: [4148] VDR version 1.4.7-tt-ext40 started
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading /etc/vdr/setup.conf
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown config parameter: noEPG =
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading /etc/vdr/sources.conf
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading /etc/vdr/diseqc.conf
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading /etc/vdr/channels.conf
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown parameter key 'P'
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: error in /etc/vdr/channels.conf, line 15
Oct 12 13:57:18 linvdr user.info vdr: [4148] deleting plugin: tvonscreen
Oct 12 13:57:18 linvdr user.info vdr: [4148] deleting plugin: skinelchi
Oct 12 13:57:18 linvdr user.info vdr: [4148] deleting plugin: pvrinput
Oct 12 13:57:18 linvdr user.info vdr: [4148] deleting plugin: mplayer
Oct 12 13:57:18 linvdr user.info vdr: [4148] deleting plugin: femon
Oct 12 13:57:18 linvdr user.info vdr: [4148] deleting plugin: dvd
Oct 12 13:57:18 linvdr user.debug vdr: [4148] max. latency time 0 seconds
Oct 12 13:57:18 linvdr user.info vdr: [4148] exiting
Oct 12 13:57:44 linvdr user.info kernel: [ 201.860496] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
Oct 12 13:57:44 linvdr user.info kernel: [ 201.867049] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Oct 12 13:57:44 linvdr user.info kernel: [ 201.919441] bt878(0): unloading
Oct 12 13:57:44 linvdr user.debug kernel: [ 201.919647] bt878_mem: 0xf994a000.
Oct 12 13:57:44 linvdr user.info kernel: [ 201.919732] ACPI: PCI interrupt for device 0000:00:0d.1 disabled
Oct 12 13:57:44 linvdr user.warn kernel: [ 201.925103] bttv0: unloading
Oct 12 13:57:44 linvdr user.warn kernel: [ 201.993973] saa7146: unregister extension 'budget_av'.
Oct 12 13:57:44 linvdr user.info kernel: [ 202.012288] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
Oct 12 13:57:44 linvdr user.warn kernel: [ 202.032723] saa7146: unregister extension 'budget_ci dvb'.
Oct 12 13:57:44 linvdr user.warn kernel: [ 202.055267] saa7146: unregister extension 'budget dvb'.
Oct 12 13:57:44 linvdr user.warn kernel: [ 202.079689] saa7146: unregister extension 'dvb'.
Oct 12 13:57:44 linvdr user.info kernel: [ 202.114370] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
Oct 12 13:57:44 linvdr user.info kernel: [ 202.274693] ivtvfb: Unloading framebuffer module
Oct 12 13:57:45 linvdr user.info kernel: [ 202.945533] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
Oct 12 13:57:45 linvdr user.info kernel: [ 202.945783] ivtv0: Removed Hauppauge WinTV PVR-350, card #0
Oct 12 13:57:45 linvdr user.info kernel: [ 203.057372] usbcore: deregistering interface driver lirc_atiusb
Oct 12 13:57:45 linvdr user.warn kernel: [ 203.060544] lirc_atiusb[3]: usb remote disconnected
Oct 12 13:58:10 linvdr auth.info sshd[4424]: Could not reverse map address 192.168.1.8.
Oct 12 13:58:10 linvdr auth.info sshd[4424]: Accepted password for root from 192.168.1.8 port 2986 ssh2
Oct 12 13:58:10 linvdr auth.info PAM_unix[4424]: (ssh) session opened for user root by (uid=0)
Oct 12 13:58:10 linvdr auth.err PAM-env[4424]: Unable to open config file: No such file or directory
Oct 12 13:58:10 linvdr auth.err PAM-env[4425]: Unable to open config file: No such file or directory
Oct 12 13:58:22 linvdr user.info kernel: [ 239.698784] ivtv: Start initialization, version 1.2.0
Oct 12 13:58:22 linvdr user.info kernel: [ 239.702164] ivtv0: Initializing card #0
Oct 12 13:58:22 linvdr user.info kernel: [ 239.702441] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:58:22 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:58:22 linvdr user.info kernel: [ 239.754781] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:58:22 linvdr user.info kernel: [ 239.754985] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:58:22 linvdr user.info kernel: [ 239.755054] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:58:22 linvdr user.info kernel: [ 239.755129] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:58:22 linvdr user.info kernel: [ 239.755199] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:58:22 linvdr user.info kernel: [ 239.755261] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:58:22 linvdr user.info kernel: [ 239.755323] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:58:22 linvdr user.info kernel: [ 239.830006] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:58:22 linvdr user.info kernel: [ 239.984767] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:58:22 linvdr user.info kernel: [ 239.996395] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:58:22 linvdr user.info kernel:
Oct 12 13:58:22 linvdr user.info kernel: [ 240.018619] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.018853] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:58:22 linvdr user.info kernel: [ 240.033750] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.036965] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.040262] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.043510] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.046739] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:58:22 linvdr user.info kernel: [ 240.050023] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.053254] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.056484] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:58:22 linvdr user.info kernel: [ 240.056862] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.056945] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:58:22 linvdr user.info kernel: [ 240.057044] ivtv: End initialization
Oct 12 13:58:23 linvdr user.info kernel: [ 240.744989] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:58:23 linvdr user.info kernel: [ 240.776439] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:58:23 linvdr user.info kernel: [ 240.979000] ivtv0: Encoder revision: 0x02060039
Oct 12 13:58:23 linvdr user.info kernel: [ 240.979349] ivtv0: Decoder revision: 0x02020023
Oct 12 13:58:23 linvdr user.info kernel: [ 241.064357] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:58:23 linvdr user.info kernel: [ 241.268738] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:58:23 linvdr user.info kernel: [ 241.376663] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:58:23 linvdr user.warn kernel: [ 241.554103] saa7146: register extension 'dvb'.
Oct 12 13:58:23 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:58:23 linvdr user.warn kernel: found saa7146 @ mem f906e000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:58:23 linvdr user.info kernel: [ 241.581222] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:58:24 linvdr user.warn kernel: [ 241.705303] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.041402] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.041624] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.134349] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:58:24 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:58:24 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.172685] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:58:24 linvdr user.info kernel: [ 242.176099] input: DVB on-card IR receiver as /class/input/input8
Oct 12 13:58:24 linvdr user.info kernel: [ 242.179335] dvb-ttpci: found av7110-0.
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.216587] saa7146: register extension 'budget dvb'.
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.244194] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.266152] saa7146: register extension 'budget_av'.
Oct 12 13:58:24 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:58:24 linvdr user.warn kernel: found saa7146 @ mem f90d8000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.269767] saa7146 (1): dma buffer size 192512
Oct 12 13:58:24 linvdr user.info kernel: [ 242.269829] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.411039] adapter failed MAC signature check
Oct 12 13:58:24 linvdr user.warn kernel: ff
Oct 12 13:58:25 linvdr user.info kernel: [ 242.651456] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:58:25 linvdr user.warn kernel: [ 242.770926] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:58:25 linvdr user.info kernel: [ 242.776136] budget-av: ci interface initialised.
Oct 12 13:58:25 linvdr user.info kernel: [ 242.811323] bttv: driver version 0.9.17 loaded
Oct 12 13:58:25 linvdr user.info kernel: [ 242.811539] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:58:25 linvdr user.info kernel: [ 242.817586] bttv: Bt8xx card found (0).
Oct 12 13:58:25 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:58:25 linvdr user.info kernel: [ 242.817915] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:58:25 linvdr user.info kernel: [ 242.817982] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:58:25 linvdr user.debug kernel: [ 242.818101] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:58:25 linvdr user.info kernel: [ 242.821153] bttv0: tuner absent
Oct 12 13:58:25 linvdr user.info kernel: [ 242.823114] bttv0: registered device video2
Oct 12 13:58:25 linvdr user.info kernel: [ 242.826100] bttv0: registered device vbi2
Oct 12 13:58:25 linvdr user.info kernel: ok
Oct 12 13:58:25 linvdr user.warn kernel: [ 242.837401] bttv0: add subdevice "dvb0"
Oct 12 13:58:25 linvdr user.info kernel: [ 242.840550] input: bttv IR (card=123) as /class/input/input9
Oct 12 13:58:25 linvdr user.info kernel: [ 242.873972] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:58:25 linvdr user.info kernel: [ 242.874342] bt878: Bt878 AUDIO function found (0).
Oct 12 13:58:25 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:58:25 linvdr user.info kernel: [ 242.874517] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:58:25 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:58:25 linvdr user.info kernel: [ 242.885135] DVB: registering new adapter (bttv0)
Oct 12 13:58:25 linvdr user.warn kernel: [ 242.943995] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:58:25 linvdr user.info kernel: [ 242.975688] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:58:25 linvdr user.info kernel: [ 242.983707] flexcop-pci: will use the HW PID filter.
Oct 12 13:58:25 linvdr user.info kernel: [ 242.983925] flexcop-pci: card revision 2
Oct 12 13:58:25 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:58:25 linvdr user.info kernel: [ 242.988115] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:58:25 linvdr user.info kernel: [ 242.998671] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:58:25 linvdr user.warn kernel: [ 243.001834] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:58:25 linvdr user.err kernel: [ 243.002362] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:58:25 linvdr user.err kernel: [ 243.203175] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:58:25 linvdr user.info kernel: [ 243.203481] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:58:25 linvdr user.warn kernel: [ 243.203561] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:58:25 linvdr user.info kernel: [ 243.206621] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:58:25 linvdr user.info kernel: [ 243.231155] i2c /dev entries driver
Oct 12 13:58:25 linvdr user.info kernel: [ 243.259053]
Oct 12 13:58:25 linvdr user.warn kernel: [ 243.259057] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:58:25 linvdr user.warn kernel: [ 243.259313] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:58:25 linvdr user.info kernel: [ 243.261662] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:58:25 linvdr user.warn kernel: [ 243.282124] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:58:25 linvdr user.info kernel: [ 243.292145] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:58:25 linvdr user.info vdr: [4696] VDR version 1.4.7-tt-ext40 started
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/setup.conf
Oct 12 13:58:25 linvdr user.err vdr: [4696] ERROR: unknown config parameter: noEPG =
Oct 12 13:58:25 linvdr user.err vdr: [4696] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:58:25 linvdr user.err vdr: [4696] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:58:25 linvdr user.err vdr: [4696] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:58:25 linvdr user.err vdr: [4696] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:58:25 linvdr user.err vdr: [4696] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/sources.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/diseqc.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/channels.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/timers.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/commands.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/reccmds.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/svdrphosts.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/remote.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/keymacros.conf
Oct 12 13:58:25 linvdr user.debug vdr: [4702] video directory scanner thread started (pid=4702, tid=4702)
Oct 12 13:58:25 linvdr user.debug vdr: [4703] video directory scanner thread started (pid=4703, tid=4703)
Oct 12 13:58:25 linvdr user.debug vdr: [4696] reading EPG data from /ramdisk/epg.data
Oct 12 13:58:25 linvdr user.debug vdr: [4696] probing /dev/dvb/adapter0/frontend0
Oct 12 13:58:27 linvdr user.debug vdr: [4703] video directory scanner thread ended (pid=4703, tid=4703)
Oct 12 13:58:27 linvdr user.debug vdr: [4702] video directory scanner thread ended (pid=4702, tid=4702)
Oct 12 13:58:28 linvdr user.debug vdr: [4705] tuner on device 1 thread started (pid=4705, tid=4705)
Oct 12 13:58:28 linvdr user.debug vdr: [4706] section handler thread started (pid=4706, tid=4706)
Oct 12 13:58:28 linvdr user.debug vdr: [4696] probing /dev/dvb/adapter1/frontend0
Oct 12 13:58:28 linvdr user.debug vdr: [4708] tuner on device 2 thread started (pid=4708, tid=4708)
Oct 12 13:58:28 linvdr user.debug vdr: [4709] section handler thread started (pid=4709, tid=4709)
Oct 12 13:58:28 linvdr user.debug vdr: [4696] probing /dev/dvb/adapter2/frontend0
Oct 12 13:58:28 linvdr user.debug vdr: [4711] tuner on device 3 thread started (pid=4711, tid=4711)
Oct 12 13:58:28 linvdr user.debug vdr: [4712] section handler thread started (pid=4712, tid=4712)
Oct 12 13:58:28 linvdr user.debug vdr: [4696] probing /dev/dvb/adapter3/frontend0
Oct 12 13:58:28 linvdr user.debug vdr: [4714] tuner on device 4 thread started (pid=4714, tid=4714)
Oct 12 13:58:28 linvdr user.debug vdr: [4715] section handler thread started (pid=4715, tid=4715)
Oct 12 13:58:28 linvdr user.info vdr: [4696] found 4 video devices
Oct 12 13:58:28 linvdr user.info vdr: [4696] initializing plugin: dvd (0.3.6-b03): turn VDR into an (almost) full featured DVD player
Oct 12 13:58:28 linvdr user.info vdr: [4696] initializing plugin: femon (1.1.3): DVB Signal Information Monitor (OSD)
Oct 12 13:58:28 linvdr user.info vdr: [4696] initializing plugin: mplayer (0.10.1): Media replay via MPlayer
Oct 12 13:58:28 linvdr user.info vdr: [4696] loading /etc/vdr/plugins/mplayersources.conf
Oct 12 13:58:28 linvdr user.info vdr: [4696] initializing plugin: pvrinput (2008-10-04): use Hauppauge PVR as input device
Oct 12 13:58:28 linvdr user.info vdr: [4696] initializing plugin: skinelchi (0.1.1pre1): Elchi VDR Skin-Plugin
Oct 12 13:58:28 linvdr user.info vdr: [4696] initializing plugin: tvonscreen (0.7.1): Shows the EPG info in form of a typical TV magazine
Oct 12 13:58:28 linvdr user.info vdr: [4696] setting primary device to 1
Oct 12 13:58:28 linvdr user.info vdr: [4696] SVDRP listening on port 2001
Oct 12 13:58:28 linvdr user.info vdr: [4696] skin "Elchi_Plugin" not available - using "classic" instead
Oct 12 13:58:28 linvdr user.info vdr: [4696] starting plugin: dvd
Oct 12 13:58:28 linvdr user.info vdr: [4696] starting plugin: femon
Oct 12 13:58:28 linvdr user.info vdr: [4696] starting plugin: mplayer
Oct 12 13:58:28 linvdr user.info vdr: [4696] starting plugin: pvrinput
Oct 12 13:58:29 linvdr user.info vdr: [4696] starting plugin: skinelchi
Oct 12 13:58:29 linvdr user.info vdr: [4696] loading /etc/vdr/plugins/skinelchi/../../themes/Elchi_Plugin-change.theme
Oct 12 13:58:29 linvdr user.info vdr: [4696] starting plugin: tvonscreen
Oct 12 13:58:29 linvdr user.info vdr: [4696] setting current skin to "Elchi_Plugin"
Oct 12 13:58:29 linvdr user.info vdr: [4696] loading /etc/vdr/themes/Elchi_Plugin-change.theme
Oct 12 13:58:29 linvdr user.debug vdr: [4727] LIRC remote control thread started (pid=4727, tid=4727)
Oct 12 13:58:29 linvdr user.debug vdr: [4728] KBD remote control thread started (pid=4728, tid=4728)
Oct 12 13:58:29 linvdr user.debug vdr: [4696] remote control LIRC - keys known
Oct 12 13:58:29 linvdr user.debug vdr: [4696] remote control KBD - keys known
Oct 12 13:58:29 linvdr user.info vdr: [4696] switching to channel 1
Oct 12 13:58:29 linvdr user.debug vdr: [4729] transfer thread started (pid=4729, tid=4729)
Oct 12 13:58:29 linvdr user.debug vdr: [4730] receiver on device 3 thread started (pid=4730, tid=4730)
Oct 12 13:58:29 linvdr user.debug vdr: [4731] TS buffer on device 3 thread started (pid=4731, tid=4731)
Oct 12 13:58:29 linvdr user.debug vdr: [4696] setting watchdog timer to 900 seconds
Oct 12 13:58:29 linvdr user.info vdr: [4696] timer 1 (11 0001-0053 'Kalkofes Mattscheibe~2008-10-15') set to event Mit 15.10.2008 00:11-00:43 'Kalkofes Mattscheibe'
Oct 12 13:58:31 linvdr user.info vdr: [4696] connect from 127.0.0.1, port 45682 - accepted
Oct 12 13:58:31 linvdr user.err vdr: [4696] pvrinput: no translation found for 'use Hauppauge PVR as input device' in language 1 (Deutsch)
Oct 12 13:58:31 linvdr user.err vdr: [4696] tvonscreen: no translation found for 'Shows the EPG info in form of a typical TV magazine' in language 1 (Deutsch)
Oct 12 13:58:33 linvdr user.info vdr: [4696] timer 1 (11 0001-0053 'Kalkofes Mattscheibe~2008-10-15') modified (active)
Oct 12 13:58:34 linvdr user.info vdr: [4696] timer 1 (11 0001-0053 'Kalkofes Mattscheibe~2008-10-15') set to event Mit 15.10.2008 00:11-00:43 'Kalkofes Mattscheibe'
Oct 12 13:58:34 linvdr user.info vdr: [4696] closing SVDRP connection
Oct 12 13:58:34 linvdr user.info vdr: [4696] switching to channel 2
Oct 12 13:58:34 linvdr user.debug vdr: [4729] transfer thread ended (pid=4729, tid=4729)
Oct 12 13:58:34 linvdr user.debug vdr: [4731] TS buffer on device 3 thread ended (pid=4731, tid=4731)
Oct 12 13:58:34 linvdr user.debug vdr: [4730] buffer stats: 35908 (1%) used
Oct 12 13:58:34 linvdr user.debug vdr: [4730] receiver on device 3 thread ended (pid=4730, tid=4730)
Oct 12 13:58:34 linvdr user.debug vdr: [4696] buffer stats: 36284 (1%) used
Oct 12 13:58:34 linvdr user.debug vdr: [4735] transfer thread started (pid=4735, tid=4735)
Oct 12 13:58:34 linvdr user.debug vdr: [4736] receiver on device 3 thread started (pid=4736, tid=4736)
Oct 12 13:58:34 linvdr user.debug vdr: [4737] TS buffer on device 3 thread started (pid=4737, tid=4737)
Oct 12 13:58:37 linvdr user.info vdr: [4696] switching to channel 3
Oct 12 13:58:37 linvdr user.debug vdr: [4735] transfer thread ended (pid=4735, tid=4735)
Oct 12 13:58:37 linvdr user.debug vdr: [4737] TS buffer on device 3 thread ended (pid=4737, tid=4737)
Oct 12 13:58:37 linvdr user.debug vdr: [4736] buffer stats: 36660 (1%) used
Oct 12 13:58:37 linvdr user.debug vdr: [4736] receiver on device 3 thread ended (pid=4736, tid=4736)
Oct 12 13:58:37 linvdr user.debug vdr: [4696] buffer stats: 59032 (2%) used
Oct 12 13:58:37 linvdr user.debug vdr: [4738] transfer thread started (pid=4738, tid=4738)
Oct 12 13:58:37 linvdr user.debug vdr: [4739] receiver on device 3 thread started (pid=4739, tid=4739)
Oct 12 13:58:37 linvdr user.debug vdr: [4740] TS buffer on device 3 thread started (pid=4740, tid=4740)
Oct 12 13:58:40 linvdr user.info vdr: [4696] switching to channel 16
Oct 12 13:58:40 linvdr user.debug vdr: [4738] transfer thread ended (pid=4738, tid=4738)
Oct 12 13:58:40 linvdr user.debug vdr: [4740] TS buffer on device 3 thread ended (pid=4740, tid=4740)
Oct 12 13:58:40 linvdr user.debug vdr: [4739] buffer stats: 66176 (3%) used
Oct 12 13:58:40 linvdr user.debug vdr: [4739] receiver on device 3 thread ended (pid=4739, tid=4739)
Oct 12 13:58:40 linvdr user.debug vdr: [4696] buffer stats: 97572 (4%) used
Oct 12 13:58:40 linvdr user.debug vdr: [4696] max. latency time 1 seconds
Oct 12 13:58:40 linvdr user.err vdr: [4705] ERROR: frontend 0: Invalid argument
Oct 12 13:58:40 linvdr user.warn kernel: [ 258.291541] DVB: frontend 0 symbol rate 0 out of range (451875..7230000)
Oct 12 13:58:43 linvdr user.info vdr: [4696] switching to channel 17
Oct 12 13:58:43 linvdr user.debug vdr: [4742] transfer thread started (pid=4742, tid=4742)
Oct 12 13:58:43 linvdr user.debug vdr: [4743] receiver on device 5 thread started (pid=4743, tid=4743)
Oct 12 13:58:44 linvdr user.info vdr: [4696] switching to channel 18
Oct 12 13:58:44 linvdr user.debug vdr: [4742] transfer thread ended (pid=4742, tid=4742)
Oct 12 13:58:44 linvdr user.debug vdr: [4743] receiver on device 5 thread ended (pid=4743, tid=4743)
Oct 12 13:58:44 linvdr user.debug vdr: [4696] buffer stats: 137052 (6%) used
Oct 12 13:58:45 linvdr user.debug vdr: [4745] transfer thread started (pid=4745, tid=4745)
Oct 12 13:58:45 linvdr user.debug vdr: [4746] receiver on device 5 thread started (pid=4746, tid=4746)
Oct 12 13:58:46 linvdr user.info vdr: [4696] switching to channel 23
Oct 12 13:58:46 linvdr user.debug vdr: [4745] transfer thread ended (pid=4745, tid=4745)
Oct 12 13:58:46 linvdr user.debug vdr: [4746] receiver on device 5 thread ended (pid=4746, tid=4746)
Oct 12 13:58:46 linvdr user.debug vdr: [4696] buffer stats: 134420 (6%) used
Oct 12 13:58:47 linvdr user.debug vdr: [4748] transfer thread started (pid=4748, tid=4748)
Oct 12 13:58:47 linvdr user.debug vdr: [4749] receiver on device 5 thread started (pid=4749, tid=4749)
Oct 12 13:58:50 linvdr auth.info PAM_unix[3121]: (ssh) session closed for user root
Oct 12 13:58:50 linvdr auth.err sshd[3121]: PAM pam_putenv: delete non-existent entry; MAIL
Oct 12 13:58:50 linvdr auth.err PAM-env[3121]: Unable to open config file: No such file or directory
Oct 12 13:59:56 linvdr user.info vdr: [4705] frontend 0 timed out while tuning to channel 149, tp 113