Hallo,
nach dem Versuch des Kernel updates auf 2.6.8 gibst es gleich vor der grünen Linie den ersten ERROR:
PCI:_ Cannot allocate resource region 4 off device 0000:00:1f.3
Logread gibt dann folgendes aus:
Oct 31 17:46:06 linvdr syslog.info syslogd started: BusyBox v1.00-pre8 (2004.03.02-16:27+0000)
Oct 31 17:46:06 linvdr syslog.warn klogd: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 31 17:46:06 linvdr syslog.warn klogd: Calibrating delay loop... 3981.31 BogoMIPS
Oct 31 17:46:06 linvdr syslog.warn klogd: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 31 17:46:06 linvdr syslog.debug klogd: CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
Oct 31 17:46:06 linvdr syslog.debug klogd: CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
Oct 31 17:46:06 linvdr syslog.info klogd: CPU: Trace cache: 12K uops, L1 D cache: 8K
Oct 31 17:46:06 linvdr syslog.info klogd: CPU: L2 cache: 128K
Oct 31 17:46:06 linvdr syslog.debug klogd: CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Oct 31 17:46:06 linvdr syslog.info klogd: Intel machine check architecture supported.
Oct 31 17:46:06 linvdr syslog.info klogd: Intel machine check reporting enabled on CPU#0.
Oct 31 17:46:06 linvdr syslog.info klogd: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Oct 31 17:46:06 linvdr syslog.warn klogd: CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 09
Oct 31 17:46:06 linvdr syslog.info klogd: Enabling fast FPU save and restore... done.
Oct 31 17:46:06 linvdr syslog.info klogd: Enabling unmasked SIMD FPU exception support... done.
Oct 31 17:46:06 linvdr syslog.info klogd: Checking 'hlt' instruction... OK.
Oct 31 17:46:06 linvdr syslog.warn klogd: enabled ExtINT on CPU#0
Oct 31 17:46:06 linvdr syslog.warn klogd: ESR value before enabling vector: 00000000
Oct 31 17:46:06 linvdr syslog.warn klogd: ESR value after enabling vector: 00000000
Oct 31 17:46:06 linvdr syslog.warn klogd: ENABLING IO-APIC IRQs
Oct 31 17:46:06 linvdr syslog.debug klogd: init IO_APIC IRQs
Oct 31 17:46:06 linvdr syslog.debug klogd: IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-23 not connected.
Oct 31 17:46:06 linvdr syslog.info klogd: ..TIMER: vector=0x31 pin1=2 pin2=-1
Oct 31 17:46:06 linvdr syslog.warn klogd: Using local APIC timer interrupts.
Oct 31 17:46:06 linvdr syslog.warn klogd: calibrating APIC timer ...
Oct 31 17:46:06 linvdr syslog.warn klogd: ..... CPU clock speed is 2017.0748 MHz.
Oct 31 17:46:06 linvdr syslog.warn klogd: ..... host bus clock speed is 100.0887 MHz.
Oct 31 17:46:06 linvdr syslog.info klogd: NET: Registered protocol family 16
Oct 31 17:46:06 linvdr syslog.info klogd: PCI: PCI BIOS revision 2.10 entry at 0xf1090, last bus=2
Oct 31 17:46:06 linvdr syslog.info klogd: PCI: Using configuration type 1
Oct 31 17:46:06 linvdr syslog.info klogd: mtrr: v2.0 (20020519)
Oct 31 17:46:06 linvdr syslog.info klogd: revision 20040816
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: Interpreter enabled
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: Using IOAPIC for interrupt routing
Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI Root Bridge [PCI0] (00:00)
Oct 31 17:46:06 linvdr syslog.warn klogd: PCI: Probing PCI hardware (bus 00)
Oct 31 17:46:06 linvdr syslog.info klogd: PCI: Enabled i801 SMBus device
Oct 31 17:46:06 linvdr syslog.info klogd: PCI: Transparent bridge - 0000:00:1e.0
Oct 31 17:46:06 linvdr syslog.debug klogd: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 31 17:46:06 linvdr syslog.debug klogd: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Oct 31 17:46:06 linvdr syslog.debug klogd: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
Oct 31 17:46:06 linvdr syslog.info klogd: Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 31 17:46:06 linvdr syslog.info klogd: usbcore: registered new driver usbfs
Oct 31 17:46:06 linvdr syslog.info klogd: usbcore: registered new driver hub
Oct 31 17:46:06 linvdr syslog.info klogd: PCI: Using ACPI for IRQ routing
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 23
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 21 (level, low) -> IRQ 21
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 18 (level, low) -> IRQ 18
Oct 31 17:46:06 linvdr syslog.debug klogd: number of MP IRQ sources: 16.
Oct 31 17:46:06 linvdr syslog.debug klogd: number of IO-APIC #2 registers: 24.
Oct 31 17:46:06 linvdr syslog.info klogd: testing the IO APIC.......................
Oct 31 17:46:06 linvdr syslog.debug klogd: IO APIC #2......
Oct 31 17:46:06 linvdr syslog.debug klogd: .... register #00: 02000000
Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : physical APIC id: 02
Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : Delivery Type: 0
Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : LTS : 0
Oct 31 17:46:06 linvdr syslog.debug klogd: .... register #01: 00178020
Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : max redirection entries: 0017
Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : PRQ implemented: 1
Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : IO APIC version: 0020
Oct 31 17:46:06 linvdr syslog.debug klogd: .... register #02: 00000000
Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : arbitration: 00
Oct 31 17:46:06 linvdr syslog.debug klogd: .... register #03: 00000001
Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : Boot DT : 1
Oct 31 17:46:06 linvdr syslog.debug klogd: .... IRQ redirection table:
Oct 31 17:46:06 linvdr syslog.debug klogd: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Oct 31 17:46:06 linvdr syslog.debug klogd: 00 000 00 1 0 0 0 0 0 0 00
Oct 31 17:46:06 linvdr syslog.debug klogd: 01 001 01 0 0 0 0 0 1 1 39
Oct 31 17:46:06 linvdr syslog.debug klogd: 02 001 01 0 0 0 0 0 1 1 31
Oct 31 17:46:06 linvdr syslog.debug klogd: 03 001 01 0 0 0 0 0 1 1 41
Oct 31 17:46:06 linvdr syslog.debug klogd: 04 001 01 0 0 0 0 0 1 1 49
Oct 31 17:46:06 linvdr syslog.debug klogd: 05 001 01 0 0 0 0 0 1 1 51
Oct 31 17:46:06 linvdr syslog.debug klogd: 06 001 01 0 0 0 0 0 1 1 59
Oct 31 17:46:06 linvdr syslog.debug klogd: 07 001 01 0 0 0 0 0 1 1 61
Oct 31 17:46:06 linvdr syslog.debug klogd: 08 001 01 0 0 0 0 0 1 1 69
Oct 31 17:46:06 linvdr syslog.debug klogd: 09 001 01 0 0 0 0 0 1 1 71
Oct 31 17:46:06 linvdr syslog.debug klogd: 0a 001 01 0 0 0 0 0 1 1 79
Oct 31 17:46:06 linvdr syslog.debug klogd: 0b 001 01 0 0 0 0 0 1 1 81
Oct 31 17:46:06 linvdr syslog.debug klogd: 0c 001 01 0 0 0 0 0 1 1 89
Oct 31 17:46:06 linvdr syslog.debug klogd: 0d 001 01 0 0 0 0 0 1 1 91
Oct 31 17:46:06 linvdr syslog.debug klogd: 0e 001 01 0 0 0 0 0 1 1 99
Oct 31 17:46:06 linvdr syslog.debug klogd: 0f 001 01 0 0 0 0 0 1 1 A1
Oct 31 17:46:06 linvdr syslog.debug klogd: 10 001 01 1 1 0 1 0 1 1 C9
Oct 31 17:46:06 linvdr syslog.debug klogd: 11 001 01 1 1 0 1 0 1 1 B9
Oct 31 17:46:06 linvdr syslog.debug klogd: 12 001 01 1 1 0 1 0 1 1 E1
Oct 31 17:46:06 linvdr syslog.debug klogd: 13 001 01 1 1 0 1 0 1 1 B1
Oct 31 17:46:06 linvdr syslog.debug klogd: 14 001 01 1 1 0 1 0 1 1 D9
Oct 31 17:46:06 linvdr syslog.debug klogd: 15 001 01 1 1 0 1 0 1 1 D1
Oct 31 17:46:06 linvdr syslog.debug klogd: 16 001 01 0 1 0 1 0 1 1 A9
Oct 31 17:46:06 linvdr syslog.debug klogd: 17 001 01 1 1 0 1 0 1 1 C1
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ to pin mappings:
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ0 -> 0:2
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ1 -> 0:1
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ3 -> 0:3
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ4 -> 0:4
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ5 -> 0:5
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ6 -> 0:6
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ7 -> 0:7
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ8 -> 0:8
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ9 -> 0:9
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ10 -> 0:10
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ11 -> 0:11
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ12 -> 0:12
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ13 -> 0:13
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ14 -> 0:14
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ15 -> 0:15
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ16 -> 0:16
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ17 -> 0:17
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ18 -> 0:18
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ19 -> 0:19
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ20 -> 0:20
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ21 -> 0:21
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ22 -> 0:22
Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ23 -> 0:23
Oct 31 17:46:06 linvdr syslog.info klogd: .................................... done.
Oct 31 17:46:06 linvdr syslog.err klogd: 0:00:1f.3
Oct 31 17:46:06 linvdr syslog.info klogd: vesafb: framebuffer at 0xf4000000, mapped to 0xe0809000, size 1875k
Oct 31 17:46:06 linvdr syslog.info klogd: vesafb: mode is 800x600x16, linelength=1600, pages=67
Oct 31 17:46:06 linvdr syslog.info klogd: vesafb: protected mode interface info at c000:56aa
Oct 31 17:46:06 linvdr syslog.info klogd: vesafb: scrolling: redraw
Oct 31 17:46:06 linvdr syslog.info klogd: vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Oct 31 17:46:06 linvdr syslog.info klogd: fb0: VESA VGA frame buffer device
Oct 31 17:46:06 linvdr syslog.info klogd: Simple Boot Flag at 0x3a set to 0x1
Oct 31 17:46:06 linvdr syslog.info klogd: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Oct 31 17:46:06 linvdr syslog.info klogd: devfs: boot_options: 0x0
Oct 31 17:46:06 linvdr syslog.info klogd: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Oct 31 17:46:06 linvdr syslog.info klogd: NTFS driver 2.1.15 [Flags: R/W].
Oct 31 17:46:06 linvdr syslog.notice klogd: udf: registering filesystem
Oct 31 17:46:06 linvdr syslog.info klogd: Initializing Cryptographic API
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: Power Button (FF) [PWRF]
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: Processor [CPU] (supports C1)
Oct 31 17:46:06 linvdr syslog.info klogd: isapnp: Scanning for PnP cards...
Oct 31 17:46:06 linvdr syslog.info klogd: isapnp: No Plug & Play device found
Oct 31 17:46:06 linvdr syslog.warn klogd: Console: switching to colour frame buffer device 100x37
Oct 31 17:46:06 linvdr syslog.info klogd: Real Time Clock Driver v1.12
Oct 31 17:46:06 linvdr syslog.info klogd: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Oct 31 17:46:06 linvdr syslog.warn klogd: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 31 17:46:06 linvdr syslog.warn klogd: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 31 17:46:06 linvdr syslog.warn klogd: Using anticipatory io scheduler
Oct 31 17:46:06 linvdr syslog.warn klogd: floppy0: no floppy controllers found
Oct 31 17:46:06 linvdr syslog.info klogd: loop: loaded (max 8 devices)
Oct 31 17:46:06 linvdr syslog.info klogd: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 31 17:46:06 linvdr syslog.info klogd: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 31 17:46:06 linvdr syslog.info klogd: ICH2: IDE controller at PCI slot 0000:00:1f.1
Oct 31 17:46:06 linvdr syslog.info klogd: ICH2: chipset revision 5
Oct 31 17:46:06 linvdr syslog.info klogd: ICH2: not 100% native mode: will probe irqs later
Oct 31 17:46:06 linvdr syslog.info klogd: ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:pio
Oct 31 17:46:06 linvdr syslog.info klogd: ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:DMA
Oct 31 17:46:06 linvdr syslog.warn klogd: hda: SAMSUNG SP1604N, ATA DISK drive
Oct 31 17:46:06 linvdr syslog.warn klogd: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 31 17:46:06 linvdr syslog.warn klogd: hdc: PHILIPS DVDRW228, ATAPI CD/DVD-ROM drive
Oct 31 17:46:06 linvdr syslog.warn klogd: hdd: SAMSUNG SP1604N, ATA DISK drive
Oct 31 17:46:06 linvdr syslog.warn klogd: ide1 at 0x170-0x177,0x376 on irq 15
Oct 31 17:46:06 linvdr syslog.warn klogd: hda: max request size: 1024KiB
Oct 31 17:46:06 linvdr syslog.info klogd: hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
Oct 31 17:46:06 linvdr syslog.info klogd: /dev/ide/host0/bus0/target0/lun0: p1
Oct 31 17:46:06 linvdr syslog.warn klogd: hdd: max request size: 1024KiB
Oct 31 17:46:06 linvdr syslog.info klogd: hdd: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
Oct 31 17:46:06 linvdr syslog.info klogd: /dev/ide/host0/bus1/target1/lun0: unknown partition table
Oct 31 17:46:06 linvdr syslog.warn klogd: hdc: ATAPI 32X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Oct 31 17:46:06 linvdr syslog.info klogd: Uniform CD-ROM driver Revision: 3.20
Oct 31 17:46:06 linvdr syslog.info klogd: mice: PS/2 mouse device common for all mice
Oct 31 17:46:06 linvdr syslog.info klogd: serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 31 17:46:06 linvdr syslog.info klogd: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 31 17:46:06 linvdr syslog.info klogd: input: AT Translated Set 2 keyboard on isa0060/serio0
Oct 31 17:46:06 linvdr syslog.info klogd: NET: Registered protocol family 2
Oct 31 17:46:06 linvdr syslog.info klogd: IP: routing cache hash table of 4096 buckets, 32Kbytes
Oct 31 17:46:06 linvdr syslog.info klogd: TCP: Hash tables configured (established 32768 bind 32768)
Oct 31 17:46:06 linvdr syslog.info klogd: NET: Registered protocol family 1
Oct 31 17:46:06 linvdr syslog.info klogd: NET: Registered protocol family 17
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: (supports S0 S1 S4 S5)
Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI wakeup devices:
Oct 31 17:46:06 linvdr syslog.warn klogd: PCI0 PCI1 PCI2 USB0 USB1
Oct 31 17:46:06 linvdr syslog.info klogd: EXT3-fs: INFO: recovery required on readonly filesystem.
Oct 31 17:46:06 linvdr syslog.info klogd: EXT3-fs: write access will be enabled during recovery.
Oct 31 17:46:06 linvdr syslog.info klogd: kjournald starting. Commit interval 5 seconds
Oct 31 17:46:06 linvdr syslog.info klogd: EXT3-fs: recovery complete.
Oct 31 17:46:06 linvdr syslog.info klogd: EXT3-fs: mounted filesystem with ordered data mode.
Oct 31 17:46:06 linvdr syslog.warn klogd: VFS: Mounted root (ext3 filesystem) readonly.
Oct 31 17:46:06 linvdr syslog.info klogd: Freeing unused kernel memory: 156k freed
Oct 31 17:46:06 linvdr syslog.info klogd: EXT3 FS on hda1, internal journal
Oct 31 17:46:06 linvdr syslog.warn klogd: cdfs 2.6.3a loaded.
Oct 31 17:46:06 linvdr syslog.info klogd: USB Universal Host Controller Interface driver v2.2
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
Oct 31 17:46:06 linvdr syslog.info klogd: uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1)
Oct 31 17:46:06 linvdr syslog.debug klogd: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Oct 31 17:46:06 linvdr syslog.info klogd: uhci_hcd 0000:00:1f.2: irq 19, io base 0000a400
Oct 31 17:46:06 linvdr syslog.info klogd: uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
Oct 31 17:46:06 linvdr syslog.info klogd: hub 1-0:1.0: USB hub found
Oct 31 17:46:06 linvdr syslog.info klogd: hub 1-0:1.0: 2 ports detected
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 23
Oct 31 17:46:06 linvdr syslog.info klogd: uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2)
Oct 31 17:46:06 linvdr syslog.debug klogd: PCI: Setting latency timer of device 0000:00:1f.4 to 64
Oct 31 17:46:06 linvdr syslog.info klogd: uhci_hcd 0000:00:1f.4: irq 23, io base 0000a000
Oct 31 17:46:06 linvdr syslog.info klogd: uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
Oct 31 17:46:06 linvdr syslog.info klogd: hub 2-0:1.0: USB hub found
Oct 31 17:46:06 linvdr syslog.info klogd: hub 2-0:1.0: 2 ports detected
Oct 31 17:46:06 linvdr syslog.info klogd: Adding 262136k swap on /var/vm/swapfile. Priority:-1 extents:67
Oct 31 17:46:06 linvdr syslog.info klogd: natsemi dp8381x driver, version 1.07+LK1.0.18, Oct 23, 2003
Oct 31 17:46:06 linvdr syslog.info klogd: originally by Donald Becker <becker@scyld.com>
Oct 31 17:46:06 linvdr syslog.info klogd: http://www.scyld.com/network/natsemi.html
Oct 31 17:46:06 linvdr syslog.info klogd: 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 18 (level, low) -> IRQ 18
Oct 31 17:46:06 linvdr syslog.info klogd: , port TP.
Oct 31 17:46:06 linvdr local0.info udhcpc[1303]: udhcpc (v0.9.9-pre) started
Oct 31 17:46:06 linvdr syslog.info klogd: eth0: DSPCFG accepted after 0 usec.
Oct 31 17:46:06 linvdr syslog.notice klogd: eth0: link up.
Oct 31 17:46:06 linvdr syslog.info klogd: eth0: Setting full-duplex based on negotiated link capability.
Oct 31 17:46:06 linvdr local0.debug udhcpc[1303]: Sending discover...
Oct 31 17:46:06 linvdr local0.debug udhcpc[1303]: Sending select for 192.168.2.151...
Oct 31 17:46:06 linvdr local0.info udhcpc[1303]: Lease of 192.168.2.151 obtained, lease time 1073741823
Oct 31 17:46:06 linvdr syslog.info klogd: Linux video capture interface: v1.00
Oct 31 17:46:06 linvdr auth.info sshd[1332]: Server listening on 0.0.0.0 port 22.
Oct 31 17:46:07 linvdr syslog.warn klogd: saa7146: register extension 'dvb'.
Oct 31 17:46:07 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
Oct 31 17:46:07 linvdr syslog.warn klogd: found saa7146 @ mem e0ae0000 (revision 1, irq 22) (0x13c2,0x0000).
Oct 31 17:46:07 linvdr syslog.warn klogd: DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3).
Oct 31 17:46:08 linvdr daemon.info init: Starting pid 1397, console /dev/tty1: '/sbin/getty'
Oct 31 17:46:08 linvdr daemon.info init: Starting pid 1398, console /dev/tty2: '/sbin/getty'
Oct 31 17:46:08 linvdr daemon.info init: Starting pid 1404, console /dev/tty3: '/sbin/getty'
Oct 31 17:46:08 linvdr syslog.warn klogd: stv0299: try to attach to Siemens/Technotrend/Hauppauge PCI rev1.3
Oct 31 17:46:08 linvdr daemon.info init: Starting pid 1410, console /dev/tty4: '/sbin/getty'
Oct 31 17:46:08 linvdr syslog.warn klogd: stv0299: setup for tuner BSRU6, TDQB-S00x
Oct 31 17:46:08 linvdr syslog.warn klogd: DVB: registering frontend 0 (STV0299/TSA5059/SL1935 based)...
Oct 31 17:46:09 linvdr syslog.err klogd: mt312_read: ret == -121
Oct 31 17:46:09 linvdr syslog.warn klogd: adapter has MAC addr = 00:d0:5c:03:e4:30
Oct 31 17:46:09 linvdr syslog.warn klogd: gpioirq unknown type=0 len=0
Oct 31 17:46:09 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261c
Oct 31 17:46:09 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
Oct 31 17:46:09 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
Oct 31 17:46:09 linvdr syslog.warn klogd: saa7146 (0): registered device video0 [v4l2]
Oct 31 17:46:09 linvdr syslog.info klogd: av7110: found av7110-0.
Oct 31 17:46:10 linvdr syslog.warn klogd: saa7146: register extension 'budget dvb'.
Oct 31 17:46:10 linvdr syslog.warn klogd: saa7146: register extension 'budget_ci dvb'.
Oct 31 17:46:10 linvdr syslog.warn klogd: saa7146: register extension 'budget dvb /w video in'.
Oct 31 17:46:10 linvdr syslog.warn klogd: lirc_dev: IR Remote Control driver registered, at major 61
Oct 31 17:46:11 linvdr syslog.info klogd: lirc_serial: auto-detected active high receiver
Oct 31 17:46:11 linvdr syslog.warn klogd: lirc_dev: lirc_register_plugin:sample_rate: 0
Oct 31 17:46:11 linvdr user.info vdr[1564]: VDR version 1.3.12 started
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.3.12
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-extb.so.1.3.12
Oct 31 17:46:11 linvdr user.debug vdr[1578]: extb: cLirc thread started (pid=1578)
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-image.so.1.3.12
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-mp3.so.1.3.12
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.3.12
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-sleeptimer.so.1.3.12
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-vcd.so.1.3.12
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-vdrcd.so.1.3.12
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-graphlcd.so.1.3.12
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-osdteletext.so.1.3.12
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/setup.conf
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrBackground = -2013265920
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrChannelName = -2013265920
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrChannelNum = -1996488705
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrEpgData = -2013265920
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrEpgTime = -2013265920
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrHelpBlue = -3407872
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrHelpGreen = -14496734
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrHelpRed = -15658548
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrHelpYellow = -14500916
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrScrolLine = -256
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrTitleLine = -256
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: CaCaps = 5 101
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrChannelname = 1
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrChannelnum = 1
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrDateTime = 1
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrEpgTime = 4
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrMenuFont = 1
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrScrolLine = 0
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrSubTitle = 7
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrSymbolOff = 8
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrSymbolOn = 4
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrTimeBar1 = 0
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrTimeBar2 = 8
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrTitle = 7
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrTitleLine = 0
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrVolumeBar = 3
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: MainMenuStyle = 1
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ProgressBar = 1
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ShowWeekdays = 0
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: SmallFonts = 1
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: Style = 0
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: Symbol = 1
Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: TimeBar = 1
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/sources.conf
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/diseqc.conf
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/channels.conf
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/timers.conf
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/commands.conf
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/reccmds.conf
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/svdrphosts.conf
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/ca.conf
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/remote.conf
Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/keymacros.conf
Oct 31 17:46:11 linvdr user.debug vdr[1564]: reading EPG data from /ramdisk/epg.data
Oct 31 17:46:11 linvdr user.debug vdr[1564]: probing /dev/dvb/adapter0/frontend0
Oct 31 17:46:11 linvdr user.debug vdr[1581]: tuner on device 1 thread started (pid=1581, tid=2051)
Oct 31 17:46:11 linvdr user.debug vdr[1582]: Section handler thread started (pid=1582, tid=3076)
Oct 31 17:46:11 linvdr user.debug vdr[1564]: probing /dev/dvb/adapter1/frontend0
Oct 31 17:46:11 linvdr user.info vdr[1564]: found 1 video device
Oct 31 17:46:11 linvdr user.info vdr[1564]: initializing plugin: dvd (0.3.5-b06): A full featured DVD Player
Oct 31 17:46:11 linvdr user.info vdr[1564]: initializing plugin: extb (0.2.7): control the extb board
Oct 31 17:46:11 linvdr user.debug vdr[1564]: extb: cLirc::open (fd=19)
Oct 31 17:46:11 linvdr user.debug vdr[1564]: extb: cExtBLircWatch::open(fd=20)
Oct 31 17:46:11 linvdr user.debug vdr[1583]: extb: cExtBLircWatch thread started (pid=1583)
Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: image (0.1.1): A Image Viewer plugin
Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: mp3 (0.9.3): A versatile audio player
Oct 31 17:46:12 linvdr user.info vdr[1564]: loading /etc/vdr/plugins/mp3sources.conf
Oct 31 17:46:12 linvdr user.info vdr[1564]: loading id3 cache from /video0/id3info.cache
Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: mplayer (0.9.3): Media replay via MPlayer
Oct 31 17:46:12 linvdr user.info vdr[1564]: loading /etc/vdr/plugins/mplayersources.conf
Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: sleeptimer (0.4): Sleep-Timer for VDR
Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: vcd (0.0.6c): VideoCD Player
Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: vdrcd (0.0.10): Plays identified Media Discs (for autofs)
Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: graphlcd (0.1.1-pre1): Output to graphic LCD
Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: osdteletext (0.4): Displays teletext on the OSD
Oct 31 17:46:12 linvdr user.info vdr[1564]: setting primary device to 1
Oct 31 17:46:12 linvdr user.info vdr[1564]: SVDRP listening on port 2001
Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: dvd
Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: extb
Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: image
Oct 31 17:46:12 linvdr user.info vdr[1564]: loading /etc/vdr/plugins/imagesources.conf
Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: mp3
Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: mplayer
Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: sleeptimer
Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: vcd
Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: vdrcd
Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: graphlcd
Oct 31 17:46:12 linvdr user.debug vdr[1584]: graphlcd plugin: Display update thread started (pid=1584)
Oct 31 17:46:12 linvdr user.debug vdr[1584]: graphlcd plugin: Testing ECP mode...
Oct 31 17:46:12 linvdr user.debug vdr[1584]: graphlcd plugin: working!
Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: osdteletext
Oct 31 17:46:12 linvdr user.info vdr[1564]: loading /etc/vdr/themes/sttng-default.theme
Oct 31 17:46:12 linvdr user.debug vdr[1585]: LIRC remote control thread started (pid=1585, tid=6151)
Oct 31 17:46:12 linvdr user.debug vdr[1586]: KBD remote control thread started (pid=1586, tid=7176)
Oct 31 17:46:12 linvdr user.debug vdr[1564]: remote control LIRC - keys known
Oct 31 17:46:12 linvdr user.debug vdr[1564]: remote control KBD - keys known
Oct 31 17:46:12 linvdr user.info vdr[1564]: switching to channel 2
Oct 31 17:46:12 linvdr user.info vdr[1584]: graphlcd plugin: T6963 initialized.
Oct 31 17:46:12 linvdr user.debug vdr[1564]: creating directory /ramdisk/vtx/S19.2E-1-1079-28006
Oct 31 17:46:12 linvdr user.debug vdr[1587]: receiver on device 1 thread started (pid=1587, tid=8201)
Oct 31 17:46:12 linvdr user.debug vdr[1564]: setting watchdog timer to 900 seconds
Oct 31 17:46:12 linvdr user.info vdr[1582]: channel 21 (KiKa;ZDFvision) event 15:30 'Tabaluga tivi' status 4
Oct 31 17:46:13 linvdr user.info vdr[1582]: channel 7 (3sat;ZDFvision) event 16:30 'Von Null auf 42 (3/3)' status 4
Oct 31 17:46:13 linvdr user.info vdr[1582]: channel 2 (ZDF;ZDFvision) event 15:20 'Vaya con dios' status 4
Oct 31 17:46:13 linvdr user.info vdr[1582]: channel 13 (Eurosport;ZDFvision) event 16:30 'Fußball' status 4
Oct 31 17:46:13 linvdr user.info vdr[1582]: channel 25 (ZDFinfokanal;ZDFvision) event 16:45 'form & funktion' status 4
Oct 31 17:46:17 linvdr user.info vdr[1564]: connect from 127.0.0.1, port 32768 - accepted
Oct 31 17:46:18 linvdr user.debug vdr[1564]: max. latency time 1 seconds
Oct 31 17:46:19 linvdr user.info vdr[1564]: closing SVDRP connection
Oct 31 17:46:19 linvdr user.debug vdr[1564]: assuming manual start of VDR
Oct 31 17:47:55 linvdr auth.info login[1397]: root login on `tty1'
Reboot geht auch nicht mehr es wird zwar der VDR gestoppt aber bei restarting system
friert der Rechner ein. Nachdem ich den Rechner aus- und wieder eingeschaltet habe gibt logread dann folgendes aus.
Oct 31 17:51:11 linvdr syslog.info syslogd started: BusyBox v1.00-pre8 (2004.03.02-16:27+0000)
Oct 31 17:51:11 linvdr syslog.info klogd: natsemi dp8381x driver, version 1.07+LK1.0.18, Oct 23, 2003
Oct 31 17:51:11 linvdr syslog.info klogd: originally by Donald Becker <becker@scyld.com>
Oct 31 17:51:11 linvdr syslog.info klogd: http://www.scyld.com/network/natsemi.html
Oct 31 17:51:11 linvdr syslog.info klogd: 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
Oct 31 17:51:11 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 18 (level, low) -> IRQ 18
Oct 31 17:51:11 linvdr syslog.info klogd: , port TP.
Oct 31 17:51:11 linvdr local0.info udhcpc[1315]: udhcpc (v0.9.9-pre) started
Oct 31 17:51:11 linvdr syslog.info klogd: eth0: DSPCFG accepted after 0 usec.
Oct 31 17:51:11 linvdr syslog.notice klogd: eth0: link up.
Oct 31 17:51:11 linvdr syslog.info klogd: eth0: Setting full-duplex based on negotiated link capability.
Oct 31 17:51:11 linvdr local0.debug udhcpc[1315]: Sending discover...
Oct 31 17:51:11 linvdr local0.debug udhcpc[1315]: Sending select for 192.168.2.151...
Oct 31 17:51:11 linvdr local0.info udhcpc[1315]: Lease of 192.168.2.151 obtained, lease time 1073741823
Oct 31 17:51:11 linvdr syslog.info klogd: Linux video capture interface: v1.00
Oct 31 17:51:11 linvdr auth.info sshd[1343]: Server listening on 0.0.0.0 port 22.
Oct 31 17:51:12 linvdr syslog.warn klogd: saa7146: register extension 'dvb'.
Oct 31 17:51:12 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
Oct 31 17:51:12 linvdr syslog.warn klogd: found saa7146 @ mem e0ae0000 (revision 1, irq 22) (0x13c2,0x0000).
Oct 31 17:51:12 linvdr syslog.warn klogd: DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3).
Oct 31 17:51:13 linvdr daemon.info init: Starting pid 1409, console /dev/tty1: '/sbin/getty'
Oct 31 17:51:13 linvdr daemon.info init: Starting pid 1412, console /dev/tty3: '/sbin/getty'
Oct 31 17:51:13 linvdr daemon.info init: Starting pid 1410, console /dev/tty2: '/sbin/getty'
Oct 31 17:51:13 linvdr daemon.info init: Starting pid 1414, console /dev/tty4: '/sbin/getty'
Oct 31 17:51:13 linvdr syslog.warn klogd: stv0299: try to attach to Siemens/Technotrend/Hauppauge PCI rev1.3
Oct 31 17:51:13 linvdr syslog.warn klogd: stv0299: setup for tuner BSRU6, TDQB-S00x
Oct 31 17:51:13 linvdr syslog.warn klogd: DVB: registering frontend 0 (STV0299/TSA5059/SL1935 based)...
Oct 31 17:51:14 linvdr syslog.err klogd: mt312_read: ret == -121
Oct 31 17:51:14 linvdr syslog.warn klogd: adapter has MAC addr = 00:d0:5c:03:e4:30
Oct 31 17:51:14 linvdr syslog.warn klogd: gpioirq unknown type=0 len=0
Oct 31 17:51:14 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261c
Oct 31 17:51:14 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
Oct 31 17:51:14 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
Oct 31 17:51:14 linvdr syslog.warn klogd: saa7146 (0): registered device video0 [v4l2]
Oct 31 17:51:14 linvdr syslog.info klogd: av7110: found av7110-0.
Oct 31 17:51:15 linvdr syslog.warn klogd: saa7146: register extension 'budget dvb'.
Oct 31 17:51:15 linvdr syslog.warn klogd: saa7146: register extension 'budget_ci dvb'.
Oct 31 17:51:15 linvdr syslog.warn klogd: saa7146: register extension 'budget dvb /w video in'.
Oct 31 17:51:15 linvdr syslog.warn klogd: lirc_dev: IR Remote Control driver registered, at major 61
Oct 31 17:51:16 linvdr syslog.info klogd: lirc_serial: auto-detected active high receiver
Oct 31 17:51:16 linvdr syslog.warn klogd: lirc_dev: lirc_register_plugin:sample_rate: 0
Oct 31 17:51:16 linvdr user.info vdr[1576]: VDR version 1.3.12 started
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.3.12
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-extb.so.1.3.12
Oct 31 17:51:16 linvdr user.debug vdr[1588]: extb: cLirc thread started (pid=1588)
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-image.so.1.3.12
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-mp3.so.1.3.12
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.3.12
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-sleeptimer.so.1.3.12
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-vcd.so.1.3.12
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-vdrcd.so.1.3.12
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-graphlcd.so.1.3.12
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-osdteletext.so.1.3.12
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/setup.conf
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrBackground = -2013265920
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrChannelName = -2013265920
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrChannelNum = -1996488705
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrEpgData = -2013265920
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrEpgTime = -2013265920
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrHelpBlue = -3407872
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrHelpGreen = -14496734
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrHelpRed = -15658548
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrHelpYellow = -14500916
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrScrolLine = -256
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrTitleLine = -256
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: CaCaps = 5 101
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrChannelname = 1
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrChannelnum = 1
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrDateTime = 1
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrEpgTime = 4
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrMenuFont = 1
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrScrolLine = 0
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrSubTitle = 7
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrSymbolOff = 8
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrSymbolOn = 4
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrTimeBar1 = 0
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrTimeBar2 = 8
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrTitle = 7
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrTitleLine = 0
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrVolumeBar = 3
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: MainMenuStyle = 1
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ProgressBar = 1
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ShowWeekdays = 0
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: SmallFonts = 1
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: Style = 0
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: Symbol = 1
Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: TimeBar = 1
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/sources.conf
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/diseqc.conf
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/channels.conf
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/timers.conf
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/commands.conf
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/reccmds.conf
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/svdrphosts.conf
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/ca.conf
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/remote.conf
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/keymacros.conf
Oct 31 17:51:16 linvdr user.debug vdr[1576]: reading EPG data from /ramdisk/epg.data
Oct 31 17:51:16 linvdr user.debug vdr[1576]: probing /dev/dvb/adapter0/frontend0
Oct 31 17:51:16 linvdr user.debug vdr[1593]: tuner on device 1 thread started (pid=1593, tid=2051)
Oct 31 17:51:16 linvdr user.debug vdr[1594]: Section handler thread started (pid=1594, tid=3076)
Oct 31 17:51:16 linvdr user.debug vdr[1576]: probing /dev/dvb/adapter1/frontend0
Oct 31 17:51:16 linvdr user.info vdr[1576]: found 1 video device
Oct 31 17:51:16 linvdr user.info vdr[1576]: initializing plugin: dvd (0.3.5-b06): A full featured DVD Player
Oct 31 17:51:16 linvdr user.info vdr[1576]: initializing plugin: extb (0.2.7): control the extb board
Oct 31 17:51:16 linvdr user.debug vdr[1576]: extb: cLirc::open (fd=19)
Oct 31 17:51:16 linvdr user.debug vdr[1576]: extb: cExtBLircWatch::open(fd=20)
Oct 31 17:51:16 linvdr user.debug vdr[1595]: extb: cExtBLircWatch thread started (pid=1595)
Oct 31 17:51:16 linvdr user.info vdr[1576]: initializing plugin: image (0.1.1): A Image Viewer plugin
Oct 31 17:51:16 linvdr user.info vdr[1576]: initializing plugin: mp3 (0.9.3): A versatile audio player
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/plugins/mp3sources.conf
Oct 31 17:51:16 linvdr user.info vdr[1576]: loading id3 cache from /video0/id3info.cache
Oct 31 17:51:17 linvdr user.info vdr[1576]: initializing plugin: mplayer (0.9.3): Media replay via MPlayer
Oct 31 17:51:17 linvdr user.info vdr[1576]: loading /etc/vdr/plugins/mplayersources.conf
Oct 31 17:51:17 linvdr user.info vdr[1576]: initializing plugin: sleeptimer (0.4): Sleep-Timer for VDR
Oct 31 17:51:17 linvdr user.info vdr[1576]: initializing plugin: vcd (0.0.6c): VideoCD Player
Oct 31 17:51:17 linvdr user.info vdr[1576]: initializing plugin: vdrcd (0.0.10): Plays identified Media Discs (for autofs)
Oct 31 17:51:17 linvdr user.info vdr[1576]: initializing plugin: graphlcd (0.1.1-pre1): Output to graphic LCD
Oct 31 17:51:17 linvdr user.info vdr[1576]: initializing plugin: osdteletext (0.4): Displays teletext on the OSD
Oct 31 17:51:17 linvdr user.info vdr[1576]: setting primary device to 1
Oct 31 17:51:17 linvdr user.info vdr[1576]: SVDRP listening on port 2001
Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: dvd
Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: extb
Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: image
Oct 31 17:51:17 linvdr user.info vdr[1576]: loading /etc/vdr/plugins/imagesources.conf
Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: mp3
Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: mplayer
Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: sleeptimer
Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: vcd
Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: vdrcd
Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: graphlcd
Oct 31 17:51:17 linvdr user.debug vdr[1596]: graphlcd plugin: Display update thread started (pid=1596)
Oct 31 17:51:17 linvdr user.debug vdr[1596]: graphlcd plugin: Testing ECP mode...
Oct 31 17:51:17 linvdr user.debug vdr[1596]: graphlcd plugin: working!
Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: osdteletext
Oct 31 17:51:17 linvdr user.info vdr[1576]: loading /etc/vdr/themes/sttng-default.theme
Oct 31 17:51:17 linvdr user.debug vdr[1597]: LIRC remote control thread started (pid=1597, tid=6151)
Oct 31 17:51:17 linvdr user.debug vdr[1598]: KBD remote control thread started (pid=1598, tid=7176)
Oct 31 17:51:17 linvdr user.debug vdr[1576]: remote control LIRC - keys known
Oct 31 17:51:17 linvdr user.debug vdr[1576]: remote control KBD - keys known
Oct 31 17:51:17 linvdr user.info vdr[1576]: switching to channel 2
Oct 31 17:51:17 linvdr user.info vdr[1596]: graphlcd plugin: T6963 initialized.
Oct 31 17:51:17 linvdr user.debug vdr[1576]: creating directory /ramdisk/vtx/S19.2E-1-1079-28006
Oct 31 17:51:17 linvdr user.debug vdr[1599]: receiver on device 1 thread started (pid=1599, tid=8201)
Oct 31 17:51:17 linvdr user.debug vdr[1576]: setting watchdog timer to 900 seconds
Oct 31 17:51:17 linvdr user.info vdr[1594]: channel 21 (KiKa;ZDFvision) event 15:30 'Tabaluga tivi' status 4
Oct 31 17:51:18 linvdr user.info vdr[1594]: channel 7 (3sat;ZDFvision) event 16:30 'Von Null auf 42 (3/3)' status 4
Oct 31 17:51:18 linvdr user.info vdr[1594]: channel 2 (ZDF;ZDFvision) event 15:20 'Vaya con dios' status 4
Oct 31 17:51:18 linvdr user.info vdr[1594]: channel 13 (Eurosport;ZDFvision) event 16:30 'Fußball' status 4
Oct 31 17:51:19 linvdr user.info vdr[1594]: channel 25 (ZDFinfokanal;ZDFvision) event 16:45 'form & funktion' status 4
Oct 31 17:51:22 linvdr user.info vdr[1576]: connect from 127.0.0.1, port 32768 - accepted
Oct 31 17:51:23 linvdr user.debug vdr[1576]: max. latency time 2 seconds
Oct 31 17:51:24 linvdr user.info vdr[1576]: closing SVDRP connection
Oct 31 17:51:24 linvdr user.debug vdr[1576]: assuming manual start of VDR
Oct 31 17:51:34 linvdr user.err vdr[1576]: ERROR: Konnte Disk nicht identifizieren!
Oct 31 17:51:36 linvdr user.debug vdr[1576]: max. latency time 3 seconds
Oct 31 17:51:56 linvdr user.debug vdr[1595]: extb: answer from extb complete
Oct 31 17:51:56 linvdr user.info vdr[1576]: connect from 127.0.0.1, port 32769 - accepted
Oct 31 17:51:56 linvdr user.info vdr[1576]: SVDRP message: 'Laufwerk oeffnen ...'
Oct 31 17:51:56 linvdr user.info vdr[1576]: info: Laufwerk oeffnen ...
Oct 31 17:51:56 linvdr user.info vdr[1576]: closing SVDRP connection
Oct 31 17:52:02 linvdr user.debug vdr[1595]: extb: answer from extb complete
Oct 31 17:52:03 linvdr user.info vdr[1576]: connect from 127.0.0.1, port 32770 - accepted
Oct 31 17:52:03 linvdr user.info vdr[1576]: SVDRP message: 'Laufwerk schliessen ....'
Oct 31 17:52:03 linvdr user.info vdr[1576]: info: Laufwerk schliessen ....
Oct 31 17:52:03 linvdr user.info vdr[1576]: closing SVDRP connection
Oct 31 17:52:19 linvdr user.err vdr[1576]: ERROR: Konnte Disk nicht identifizieren!
Oct 31 17:52:29 linvdr user.debug vdr[1576]: max. latency time 4 seconds
Oct 31 17:52:35 linvdr user.debug vdr[1576]: VCD: Track 1
Oct 31 17:52:35 linvdr user.debug vdr[1576]: VCD: Play Track 1
Oct 31 17:53:05 linvdr user.info vdr[1576]: switching to channel 2
Oct 31 17:53:05 linvdr user.debug vdr[1599]: receiver on device 1 thread ended (pid=1599, tid=8201)
Oct 31 17:53:05 linvdr user.debug vdr[1576]: buffer stats: 0 (0%) used
Oct 31 17:53:05 linvdr user.debug vdr[1627]: receiver on device 1 thread started (pid=1627, tid=10249)
Oct 31 17:53:19 linvdr user.debug vdr[1576]: VCD: Track 2
Oct 31 17:53:19 linvdr user.debug vdr[1576]: VCD: Play Track 2
Oct 31 17:53:19 linvdr user.debug vdr[1629]: VCD: input thread started (pid=1629)
Oct 31 17:53:40 linvdr user.debug vdr[1629]: VCD: input thread ended (pid=1629)
Oct 31 17:53:40 linvdr user.info vdr[1576]: switching to channel 2
Oct 31 17:53:40 linvdr user.debug vdr[1627]: receiver on device 1 thread ended (pid=1627, tid=10249)
Oct 31 17:53:40 linvdr user.debug vdr[1576]: buffer stats: 0 (0%) used
Oct 31 17:53:40 linvdr user.debug vdr[1630]: receiver on device 1 thread started (pid=1630, tid=13321)
Oct 31 17:53:58 linvdr auth.info login[1409]: root login on `tty1'
Das abspielen von CD´s geht übrigens weiter hin nicht. Hat einer eine Ahnung was hier falsch läuft? Für Hilfe wäre ich sehr dankbar
Gruß Dieter