Hi zusammen,
lange ist es her, dass ich mal wieder nen neuen VDR aufsetze. ich habe gestern erfolgreich yaVDR 0.5 auf einem POV 330 installieren können (läuft alles schön flüssig, selbst 1080p mkvs und HD TV etc. echt super!).
Nun habe ich für einen Freund ein System zusammenbauen wollen aber das will nicht so recht.
X verabschiedet sich mit einem segfault und ich weiß echt nicht mehr weiter. Das war schon direkt nach der Installation so.
Grafikkarte ist eine Zotac ZT-60601-10H (GT610 2GB)
bei yaVDR 0.5 wird ja der nvidia 304.51 mitgeliefert. Auch mit einem 295.59 klappt es nicht, was wohl Mindestanforderung ist laut:
Zotac GT 610 PCI - Alternative für alte PCs?
Ich hänge mal das Xorg.log ran.
EDIT: noch ein paar Infos
dmesg | grep -i nvidia
[ 4.105726] nvidia: module license 'NVIDIA' taints kernel.
[ 4.566518] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 4.566586] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 4.566879] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.566886] nvidia 0000:01:00.0: setting latency timer to 64
[ 4.566976] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012
[ 5.903423] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
# dmesg | grep -i nvrm
[ 4.566976] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012
[ 5.903416] NVRM: GPU at 0000:01:00: GPU-0b2c32cc-bc00-bfda-07cf-cd714a9314f1
[ 5.903420] NVRM: Your system is not currently configured to drive a VGA console
[ 5.903423] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 5.903425] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 5.903426] NVRM: drivers including, but not limited to, vesafb, may result in
[ 5.903428] NVRM: corruption and stability problems, and is not supported.
# lspci -vv -s 01:00.0
01:00.0 VGA compatible controller: NVIDIA Corporation Device 104a (rev a1) (prog-if 00 [VGA controller])
Subsystem: ZOTAC International (MCO) Ltd. Device 6222
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e8000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
[virtual] Expansion ROM at fb000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nvidia
Kernel modules: nvidia_current, nouveau, nvidiafb
Display More
Evtl ist das ja ein bekanntes Problem? Habe auch schon das portal und google gequält. Ohne Erfolg.
Danke für jeden Hinweis,
Flo