Hmmm...strange. I have no signal on switch 0 (or any other) either.The diseqc is an unpowered one, so power/tone from the receiver (tt3650)
De diseqc is new and working (tested with dreambox and windows)
Can the length be an issue? Probably not because like I said its working in windows.
Hallo,
Da mein Deutsch nicht sehr gut is, habe ich einen thread in dem internationalen Forum erstellt.
Leider habe ich keine antwort erhalten so vielleicht kann mir jemand hier helfen?
Der thread kann hier gefunden werden:
https://www.vdr-portal.de/board79-intern…-0-under-linux/
Viele dank!
Hi all,
I'm trying for 2 weeks to get my TT3650 running in a diseqc 2.0 4/1 setup.
Running Ubuntu 11.04 (2.6.38-8 kernel) and using the svn from liplianin for the drivers/modules.
I just can't get it working. The driver works with 1 satellite straight to LNB. The setup also works fine under windows but with linux I can't get the diseqc 2.0 working.
All scanning apps are failing tuning whatever I try. (ie. w_scan -o7 -fs -s S19E2 -D0c)
I'm very sure that the setup is fine. switchport 0=19.2, port 1=13.0, port 2=23,5 and port 3=28.2
Are these drivers supporting diseqc 2.0 anyway or do I need to patch?
Please help!
Thanks.
