Posts by Diggo

Diggo · Welches Plugin Diggo May 27, 2016 at 5:35 PM

Super, das war´s! Vielen dank!

Diggo · Welches Plugin Diggo May 27, 2016 at 3:13 PM

... muss ich installieren, damit ich im Webfrontend (vdr-live) so einen Button "nach Wiederholungen suchen", wie z.B. bei YaVDR eingebaut ist, erhalte? Bisher dachte ich EPG-Search wäre das...

Diggo · [ANNOUNCE] yaVDR 0.6.1 Diggo January 29, 2016 at 12:05 AM

Meine Güte, das ist jetzt schon nen Monat her und ich bekomme es jetzt erst mit! Danke für die neue Version! Ich freu mich aufs Testen die Tage!

Diggo

Was für ein Timing meinerseits , hatte im Frühling letzten Jahres deine Pakete ausprobiert und die liefen super. Die Karte musste dann aber weiterwandern in den Wohnzimmer VDR (yaVDR). Habe diese Woche daraufhin noch eine Cine CT aufgrund der guten Erfahrungen geholt und wieder in den Server (Arch) gesteckt und erstmal doof aus der Wäsche geguckt - jetzt diesen Thread gefunden.

Also an dieser Stelle nochmal vielen Dank für deine bisherige Arbeit Copperhead! Vielleicht wird sich ja wieder was in Zukunft ergeben, aber Prüfungen sind wichtiger! Kann davon selbst ein Lied singen. Was gut/schlecht/wie/wo läuft kann ich nicht beurteilen, wollte nur aus "Enduser"-sicht nur nochmal Danke sagen und zeigen, dass auch deine Arbeit meine Kaufentscheidung beeinflusst hat. Die DD Karten sind zweifelsohne gut, aber wenn man einfach deine Pakete nutzen konnte, wars halt noch besser/bequemer ;D. Vielleicht reiche ich die Karte jetzt einfach in eine KVM-VM durch und lasse dort erstmal YaVDR-headless laufen (*edit* vorher versuche ich natürlich noch das PKGfile).

Diggo

Hi,

ich kann leider nicht genau sagen seit wann, aber ich schätze nach einem Update kann ich keine Aufnahmen mehr auf XBMC-Clients mit XVDR Plugin übers Netz mehr sehen.

Ich kann alle Aufnahmen anwählen, jedoch passiert dann nichts. Die einzige Logmeldung die ich erhalte ist auf dem yaVDR Server im Syslog;

Code

vdr: [17179] XVDR-Error: processRecStream_Open - unable to start recording !

Hat jemand schonmal einen ähnlichen Fehler gehabt? Den Client würde ich ausschließen, da ich dort zum Test einen FireTV, einen Raspi und ein Netbook (Linux) zum Testen hatte.

Diggo · Jetson TK1 Diggo March 25, 2014 at 10:28 PM

Ich glaube es wird ein neues Spielzeug geben, auf dem ein XBMC/VDR Client laufen kann

Siehe "Update" beim Jetson TK1:

http://www.computerbase.de/2014-03/nvidia…-maxwell-tegra/

Diggo · VDR4Arch Frage bezügl. Systemd Diggo March 20, 2014 at 10:19 AM

Hm... also solange die Nummer rennt, mach ich dann einfach mal weiter wie bisher . Im Idealfall starte ich den VDR ja eh nur einmal Wollte nur wissen, ob ich irgendwas verkorkst habe. Vielen Dank für deine Hilfe!

Diggo · VDR4Arch Frage bezügl. Systemd Diggo March 20, 2014 at 8:21 AM

Code

[root@Virtking]# ls -la /dev/dvb/adapter0/
insgesamt 0
drwxr-xr-x 2 root root 	120 20. Mär 07:42 .
drwxr-xr-x 3 root root  	60 20. Mär 07:42 ..
crw-rw---- 1 root video 212, 4 20. Mär 07:42 demux0
crw-rw---- 1 root video 212, 5 20. Mär 07:42 dvr0
crw-rw---- 1 root video 212, 3 20. Mär 07:42 frontend0
crw-rw---- 1 root video 212, 7 20. Mär 07:42 net0
[root@Virtking]# ls -la /dev/dvb/
insgesamt 0
drwxr-xr-x  3 root root   60 20. Mär 07:42 .
drwxr-xr-x 19 root root 3360 20. Mär 07:45 ..
drwxr-xr-x  2 root root  120 20. Mär 07:42 adapter0

Display More

Code

[root@Virtking vdr.service.d]# ls -la
insgesamt 12
drwxr-xr-x 2 root root 4096 20. Mär 00:32 .
drwxr-xr-x 5 root root 4096 20. Mär 00:32 ..
-rw-r--r-- 1 root root  301 20. Mär 06:18 wait-for-devices.conf

Code

[root@Virtking vdr.service.d]# cat wait-for-devices.conf 
[Unit]
Wants=dev-dvb-adapter0-demux0.device
After=dev-dvb-adapter0-demux0.device
Wants=dev-dvb-adapter0-dvr0.device
After=dev-dvb-adapter0-dvr0.device
Wants=dev-dvb-adapter0-frontend0.device
After=dev-dvb-adapter0-frontend0.device
Wants=dev-dvb-adapter0-net0.device
After=dev-dvb-adapter0-net0.device

Ich schätze mal, dass ich hier was anpassen muss?

Diggo

Ja, das würde zu den Kaltstarts passen. Ich lasse die CineCT derzeit noch auf einem Atomboard laufen und teste hier den 24/7 Einsatz über ein paar Wochen hinweg. Mein Server läuft/lief eigentlich über Monate durch, das würde ich halt gerne beibehalten und vor allem mich halt wieder drauf verlassen können, dass das Teil aufnimmt, wenn es soll. Verschwindet bei Dir auch der Tuner, wenn die Karte abstürzt?

Meine Hardware:
Asus M5A99X
Athlon II 630
8GB ECC

Dom0: Arch Linux, KVM Host
DomU: YaVDR, octopus über VFIO-PCI durchgereicht mit IOMMU

Diggo · VDR4Arch Frage bezügl. Systemd Diggo March 20, 2014 at 1:28 AM

Hallo,

erstmal vielen Dank an Copperhead für die Umsetzung für Arch . Mit der Erfahrung aus YaVDR bin ich hier auch recht schnell ans Ziel gekommen und kann jetzt zumindest schonmal über VLC Streamdev-Verbindungen betrachten. Ich bin heute bei VDR4Arch gelandet, weil ich bei einem Virtualisierungssetup nicht weitergekommen bin. Zumal halte ich einen DVB-C Stream nicht für gefährlich und so habe ich jetzt gedacht, ich könnte den Server/Empfangskarten direkt in der Dom0 betreiben.
Soweit so gut, ich habe jetzt erstmal mit einer alten TT Budgetkarte begonnen, bevor ich mich an die Octopus-devices wage.

Display Spoiler

Code

lspci -vv
07:05.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
    	Subsystem: Technotrend Systemtechnik GmbH Device 101a
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 32 (3750ns min, 9500ns max)
    	Interrupt: pin A routed to IRQ 20
    	Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=512]
    	Kernel driver in use: budget_ci dvb
    	Kernel modules: budget_ci

Nun zu meiner eigentlichen Frage:
Wenn ich sysctl start vdr ausführe, dann sehe ich im syslog, dass er sehr lange wartet (scheinbar 90 sec timeout) auf die devices dev-dvb.adapterXYZ -> danach startet er aber ganz normal, lädt die Plugins und ich kann über das live-plugin umschalten, streamen etc. . Woran kann das liegen? Kann ich darauf Einfluss nehmen?

Code

Mär 20 01:16:06 Virtking systemd[1]: Reloading.
Mär 20 01:16:06 Virtking systemd[1]: Stopped Video Disk Recorder.
Mär 20 01:16:06 Virtking systemd[1]: Unit vdr.service entered failed state.
Mär 20 01:16:54 Virtking systemd[1]: Expecting device dev-dvb-adapter0-net0.device...
Mär 20 01:16:54 Virtking systemd[1]: Expecting device dev-dvb-adapter0-frontend0.device...
Mär 20 01:16:54 Virtking systemd[1]: Expecting device dev-dvb-adapter0-dvr0.device...
Mär 20 01:16:54 Virtking systemd[1]: Expecting device dev-dvb-adapter0-demux0.device...
Mär 20 01:18:24 Virtking systemd[1]: Job dev-dvb-adapter0-demux0.device/start timed out.
Mär 20 01:18:24 Virtking systemd[1]: Timed out waiting for device dev-dvb-adapter0-demux0.device.
Mär 20 01:18:24 Virtking systemd[1]: Job dev-dvb-adapter0-dvr0.device/start timed out.
Mär 20 01:18:24 Virtking systemd[1]: Timed out waiting for device dev-dvb-adapter0-dvr0.device.
Mär 20 01:18:24 Virtking systemd[1]: Job dev-dvb-adapter0-frontend0.device/start timed out.
Mär 20 01:18:24 Virtking systemd[1]: Timed out waiting for device dev-dvb-adapter0-frontend0.device.
Mär 20 01:18:24 Virtking systemd[1]: Job dev-dvb-adapter0-net0.device/start timed out.
Mär 20 01:18:24 Virtking systemd[1]: Timed out waiting for device dev-dvb-adapter0-net0.device.
Mär 20 01:18:24 Virtking systemd[1]: Starting Video Disk Recorder...

Display More

Diggo

Okay, ich gebs langsam auf... ich probier jetzt erstmal ob die Karte standalone in nem nichtivirtualisierten System anständig läuft.

Dmesg Auszug:

Display Spoiler

Code

[	0.000000] Initializing cgroup subsys cpuset
[	0.000000] Initializing cgroup subsys cpu
[	0.000000] Initializing cgroup subsys cpuacct
[	0.000000] Linux version 3.11.0-18-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #32~precise1-Ubuntu SMP Thu Feb 20 17:52:10 UTC 2014 (Ubuntu 3.11.0-18.32~precise1-generic 3.11.10.4)
[	0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=9506fa9f-b32d-41c1-aa53-321bdbd99f86 ro vmalloc=256m vga=792 noresume nohz=off acpi_enforce_resources=lax
[	0.000000] KERNEL supported cpus:
[	0.000000]   Intel GenuineIntel
[	0.000000]   AMD AuthenticAMD
[	0.000000]   Centaur CentaurHauls
[	0.000000] e820: BIOS-provided physical RAM map:
[	0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[	0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[	0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[	0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005fffdfff] usable
[	0.000000] BIOS-e820: [mem 0x000000005fffe000-0x000000005fffffff] reserved
[	0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[	0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[	0.000000] NX (Execute Disable) protection: active
[	0.000000] SMBIOS 2.4 present.
[	0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
[	0.000000] Hypervisor detected: KVM
[	0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[	0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[	0.000000] No AGP bridge found
[	0.000000] e820: last_pfn = 0x5fffe max_arch_pfn = 0x400000000
[	0.000000] MTRR default type: write-back
[	0.000000] MTRR fixed ranges enabled:
[	0.000000]   00000-9FFFF write-back
[	0.000000]   A0000-BFFFF uncachable
[	0.000000]   C0000-FFFFF write-protect
[	0.000000] MTRR variable ranges enabled:
[	0.000000]   0 base 0080000000 mask FF80000000 uncachable
[	0.000000]   1 disabled
[	0.000000]   2 disabled
[	0.000000]   3 disabled
[	0.000000]   4 disabled
[	0.000000]   5 disabled
[	0.000000]   6 disabled
[	0.000000]   7 disabled
[	0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[	0.000000] found SMP MP-table at [mem 0x000f17a0-0x000f17af] mapped at [ffff8800000f17a0]
[	0.000000] Scanning 1 areas for low memory corruption
[	0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[	0.000000] Using GB pages for direct mapping
[	0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[	0.000000]  [mem 0x00000000-0x000fffff] page 4k
[	0.000000] BRK [0x01fda000, 0x01fdafff] PGTABLE
[	0.000000] BRK [0x01fdb000, 0x01fdbfff] PGTABLE
[	0.000000] BRK [0x01fdc000, 0x01fdcfff] PGTABLE
[	0.000000] init_memory_mapping: [mem 0x5fc00000-0x5fdfffff]
[	0.000000]  [mem 0x5fc00000-0x5fdfffff] page 2M
[	0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE
[	0.000000] init_memory_mapping: [mem 0x5c000000-0x5fbfffff]
[	0.000000]  [mem 0x5c000000-0x5fbfffff] page 2M
[	0.000000] init_memory_mapping: [mem 0x00100000-0x5bffffff]
[	0.000000]  [mem 0x00100000-0x001fffff] page 4k
[	0.000000]  [mem 0x00200000-0x5bffffff] page 2M
[	0.000000] init_memory_mapping: [mem 0x5fe00000-0x5fffdfff]
[	0.000000]  [mem 0x5fe00000-0x5fffdfff] page 4k
[	0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE
[	0.000000] RAMDISK: [mem 0x35ddc000-0x36ee5fff]
[	0.000000] ACPI: RSDP 00000000000f1610 00014 (v00 BOCHS )
[	0.000000] ACPI: RSDT 000000005fffe3f0 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[	0.000000] ACPI: FACP 000000005fffff80 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[	0.000000] ACPI: DSDT 000000005fffe430 01137 (v01   BXPC   BXDSDT 00000001 INTL 20130823)
[	0.000000] ACPI: FACS 000000005fffff40 00040
[	0.000000] ACPI: SSDT 000000005ffff6a0 00899 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[	0.000000] ACPI: APIC 000000005ffff5b0 00080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[	0.000000] ACPI: HPET 000000005ffff570 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[	0.000000] ACPI: Local APIC address 0xfee00000
[	0.000000] No NUMA configuration found
[	0.000000] Faking a node at [mem 0x0000000000000000-0x000000005fffdfff]
[	0.000000] Initmem setup node 0 [mem 0x00000000-0x5fffdfff]
[	0.000000]   NODE_DATA [mem 0x5fff9000-0x5fffdfff]
[	0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[	0.000000] kvm-clock: cpu 0, msr 0:5fff5001, boot clock
[	0.000000]  [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005de00000-ffff88005f5fffff] on node 0
[	0.000000] Zone ranges:
[	0.000000]   DMA  	[mem 0x00001000-0x00ffffff]
[	0.000000]   DMA32	[mem 0x01000000-0xffffffff]
[	0.000000]   Normal   empty
[	0.000000] Movable zone start for each node
[	0.000000] Early memory node ranges
[	0.000000]   node   0: [mem 0x00001000-0x0009efff]
[	0.000000]   node   0: [mem 0x00100000-0x5fffdfff]
[	0.000000] On node 0 totalpages: 393116
[	0.000000]   DMA zone: 64 pages used for memmap
[	0.000000]   DMA zone: 21 pages reserved
[	0.000000]   DMA zone: 3998 pages, LIFO batch:0
[	0.000000]   DMA32 zone: 6080 pages used for memmap
[	0.000000]   DMA32 zone: 389118 pages, LIFO batch:31
[	0.000000] ACPI: PM-Timer IO Port: 0xb008
[	0.000000] ACPI: Local APIC address 0xfee00000
[	0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[	0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[	0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[	0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[	0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[	0.000000] ACPI: IRQ0 used by override.
[	0.000000] ACPI: IRQ2 used by override.
[	0.000000] ACPI: IRQ5 used by override.
[	0.000000] ACPI: IRQ9 used by override.
[	0.000000] ACPI: IRQ10 used by override.
[	0.000000] ACPI: IRQ11 used by override.
[	0.000000] Using ACPI (MADT) for SMP configuration information
[	0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[	0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[	0.000000] nr_irqs_gsi: 40
[	0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[	0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[	0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[	0.000000] e820: [mem 0x60000000-0xfeffbfff] available for PCI devices
[	0.000000] Booting paravirtualized kernel on KVM
[	0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[	0.000000] PERCPU: Embedded 29 pages/cpu @ffff88005fc00000 s86720 r8192 d23872 u1048576
[	0.000000] pcpu-alloc: s86720 r8192 d23872 u1048576 alloc=1*2097152
[	0.000000] pcpu-alloc: [0] 0 1 
[	0.000000] kvm-clock: cpu 0, msr 0:5fff5001, primary cpu clock
[	0.000000] KVM setup async PF for cpu 0
[	0.000000] kvm-stealtime: cpu 0, msr 5fc0dfc0
[	0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 386951
[	0.000000] Policy zone: DMA32
[	0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=9506fa9f-b32d-41c1-aa53-321bdbd99f86 ro vmalloc=256m vga=792 noresume nohz=off acpi_enforce_resources=lax
[	0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[	0.000000] Checking aperture...
[	0.000000] No AGP bridge found
[	0.000000] Calgary: detecting Calgary via BIOS EBDA area
[	0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[	0.000000] Memory: 1513580K/1572464K available (7513K kernel code, 1080K rwdata, 4076K rodata, 1392K init, 1428K bss, 58884K reserved)
[	0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[	0.000000] Hierarchical RCU implementation.
[	0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[	0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[	0.000000]  Offload RCU callbacks from all CPUs
[	0.000000]  Offload RCU callbacks from CPUs: 0-255.
[	0.000000] NR_IRQS:16640 nr_irqs:512 16
[	0.000000] Console: colour dummy device 80x25
[	0.000000] console [tty0] enabled
[	0.000000] allocated 6291456 bytes of page_cgroup
[	0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[	0.000000] hpet clockevent registered
[	0.000000] tsc: Detected 2809.376 MHz processor
[	0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[	0.008000] Calibrating delay loop (skipped) preset value.. 5618.75 BogoMIPS (lpj=11237504)
[	0.008000] pid_max: default: 32768 minimum: 301
[	0.008000] Security Framework initialized
[	0.008000] AppArmor: AppArmor initialized
[	0.008000] Yama: becoming mindful.
[	0.008000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[	0.008000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[	0.008000] Mount-cache hash table entries: 256
[	0.008000] Initializing cgroup subsys memory
[	0.008000] Initializing cgroup subsys devices
[	0.008000] Initializing cgroup subsys freezer
[	0.008000] Initializing cgroup subsys blkio
[	0.008000] Initializing cgroup subsys perf_event
[	0.008000] Initializing cgroup subsys hugetlb
[	0.008000] mce: CPU supports 10 MCE banks
[	0.008000] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[	0.008000] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[	0.008000] tlb_flushall_shift: 4
[	0.008000] Freeing SMP alternatives memory: 28K (ffffffff81e6c000 - ffffffff81e73000)
[	0.012602] ACPI: Core revision 20130517
[	0.013398] ACPI: All ACPI Tables successfully acquired
[	0.013439] ftrace: allocating 31308 entries in 123 pages
[	0.024367] Enabling x2apic
[	0.024380] Enabled x2apic
[	0.024541] Switched APIC routing to physical x2apic.
[	0.025644] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[	0.025648] smpboot: CPU0: AMD Athlon(tm) II X4 630 Processor (fam: 10, model: 05, stepping: 03)
[	0.028000] Performance Events: Broken PMU hardware detected, using software events only.
[	0.028000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
[	0.028000] NMI watchdog: disabled (cpu0): hardware events not enabled
[	0.028000] smpboot: Booting Node   0, Processors  #1 OK
[	0.028000] kvm-clock: cpu 1, msr 0:5fff5041, secondary cpu clock
[	0.068012] Brought up 2 CPUs
[	0.068022] smpboot: Total of 2 processors activated (11237.50 BogoMIPS)
[	0.068000] KVM setup async PF for cpu 1
[	0.068000] kvm-stealtime: cpu 1, msr 5fd0dfc0
[	0.100100] devtmpfs: initialized
[	0.104822] EVM: security.selinux
[	0.104825] EVM: security.SMACK64
[	0.104827] EVM: security.capability
[	0.105920] regulator-dummy: no parameters
[	0.106018] RTC time:  1:12:01, date: 03/16/14
[	0.106061] NET: Registered protocol family 16
[	0.120019] ACPI: bus type PCI registered
[	0.120024] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[	0.120123] PCI: Using configuration type 1 for base access
[	0.120126] PCI: Using configuration type 1 for extended access
[	0.132093] bio: create slab <bio-0> at 0
[	0.132244] ACPI: Added _OSI(Module Device)
[	0.132248] ACPI: Added _OSI(Processor Device)
[	0.132250] ACPI: Added _OSI(3.0 _SCP Extensions)
[	0.132252] ACPI: Added _OSI(Processor Aggregator Device)
[	0.136076] ACPI: EC: Look up EC in DSDT
[	0.137319] ACPI: Interpreter enabled
[	0.137327] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[	0.137333] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[	0.137347] ACPI: (supports S0 S3 S4 S5)
[	0.137350] ACPI: Using IOAPIC for interrupt routing
[	0.137366] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[	0.137622] ACPI: No dock devices found.
[	0.140288] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[	0.140298] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[	0.140302] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[	0.140582] acpiphp: Slot [3] registered
[	0.140607] acpiphp: Slot [4] registered
[	0.140626] acpiphp: Slot [5] registered
[	0.140645] acpiphp: Slot [6] registered
[	0.140664] acpiphp: Slot [7] registered
[	0.140686] acpiphp: Slot [8] registered
[	0.140705] acpiphp: Slot [9] registered
[	0.140725] acpiphp: Slot [10] registered
[	0.140744] acpiphp: Slot [11] registered
[	0.140763] acpiphp: Slot [12] registered
[	0.140781] acpiphp: Slot [13] registered
[	0.140800] acpiphp: Slot [14] registered
[	0.140818] acpiphp: Slot [15] registered
[	0.140838] acpiphp: Slot [16] registered
[	0.140857] acpiphp: Slot [17] registered
[	0.140876] acpiphp: Slot [18] registered
[	0.140894] acpiphp: Slot [19] registered
[	0.140913] acpiphp: Slot [20] registered
[	0.140931] acpiphp: Slot [21] registered
[	0.140950] acpiphp: Slot [22] registered
[	0.140970] acpiphp: Slot [23] registered
[	0.140989] acpiphp: Slot [24] registered
[	0.141008] acpiphp: Slot [25] registered
[	0.141026] acpiphp: Slot [26] registered
[	0.141045] acpiphp: Slot [27] registered
[	0.141063] acpiphp: Slot [28] registered
[	0.141082] acpiphp: Slot [29] registered
[	0.141102] acpiphp: Slot [30] registered
[	0.141121] acpiphp: Slot [31] registered
[	0.141132] PCI host bridge to bus 0000:00
[	0.141136] pci_bus 0000:00: root bus resource [bus 00-ff]
[	0.141139] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[	0.141142] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[	0.141145] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[	0.141148] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[	0.141181] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[	0.141475] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[	0.141835] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[	0.146328] pci 0000:00:01.1: reg 0x20: [io  0xc0e0-0xc0ef]
[	0.148189] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
[	0.152913] pci 0000:00:01.2: reg 0x20: [io  0xc080-0xc09f]
[	0.154848] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[	0.155157] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[	0.155170] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[	0.155350] pci 0000:00:02.0: [15ad:0405] type 00 class 0x030000
[	0.158535] pci 0000:00:02.0: reg 0x10: [io  0xc0f0-0xc0ff]
[	0.164028] pci 0000:00:02.0: reg 0x14: [mem 0xfd000000-0xfdffffff pref]
[	0.172022] pci 0000:00:02.0: reg 0x18: [mem 0xfe000000-0xfe00ffff pref]
[	0.198591] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[	0.200096] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[	0.201924] pci 0000:00:03.0: reg 0x10: [io  0xc0a0-0xc0bf]
[	0.203638] pci 0000:00:03.0: reg 0x14: [mem 0xfebe0000-0xfebe0fff]
[	0.212009] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[	0.212355] pci 0000:00:04.0: [dd01:0003] type 00 class 0x048000
[	0.213695] pci 0000:00:04.0: reg 0x10: [mem 0xfebd0000-0xfebdffff 64bit]
[	0.220531] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[	0.222349] pci 0000:00:05.0: reg 0x10: [io  0xc000-0xc03f]
[	0.224009] pci 0000:00:05.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff]
[	0.233165] pci 0000:00:06.0: [1af4:1002] type 00 class 0x00ff00
[	0.234104] pci 0000:00:06.0: reg 0x10: [io  0xc0c0-0xc0df]
[	0.240063] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000
[	0.241890] pci 0000:00:07.0: reg 0x10: [io  0xc040-0xc07f]
[	0.243618] pci 0000:00:07.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff]
[	0.252766] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[	0.252881] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[	0.252963] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[	0.253042] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[	0.256049] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[	0.260186] ACPI: Enabled 16 GPEs in block 00 to 0F
[	0.260195] ACPI: \_SB_.PCI0: notify handler is installed
[	0.260220] Found 1 acpi root devices
[	0.260405] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[	0.260410] vgaarb: loaded
[	0.260412] vgaarb: bridge control possible 0000:00:02.0
[	0.260640] SCSI subsystem initialized
[	0.260647] ACPI: bus type ATA registered
[	0.264111] libata version 3.00 loaded.
[	0.264145] ACPI: bus type USB registered
[	0.264163] usbcore: registered new interface driver usbfs
[	0.264172] usbcore: registered new interface driver hub
[	0.264192] usbcore: registered new device driver usb
[	0.272074] PCI: Using ACPI for IRQ routing
[	0.272079] PCI: pci_cache_line_size set to 64 bytes
[	0.272245] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[	0.272251] e820: reserve RAM buffer [mem 0x5fffe000-0x5fffffff]
[	0.272370] NetLabel: Initializing
[	0.272373] NetLabel:  domain hash size = 128
[	0.272375] NetLabel:  protocols = UNLABELED CIPSOv4
[	0.272392] NetLabel:  unlabeled traffic allowed by default
[	0.272508] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[	0.272524] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[	0.272530] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[	0.299214] Switched to clocksource kvm-clock
[	0.304671] AppArmor: AppArmor Filesystem Enabled
[	0.304713] pnp: PnP ACPI init
[	0.304729] ACPI: bus type PNP registered
[	0.304823] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[	0.304870] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[	0.304906] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[	0.304943] pnp 00:03: [dma 2]
[	0.304956] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[	0.305029] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[	0.305079] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[	0.305129] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[	0.305238] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[	0.305329] pnp: PnP ACPI: found 8 devices
[	0.305332] ACPI: bus type PNP unregistered
[	0.311097] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[	0.311101] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[	0.311103] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[	0.311105] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[	0.311150] NET: Registered protocol family 2
[	0.311306] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[	0.311436] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[	0.311544] TCP: Hash tables configured (established 16384 bind 16384)
[	0.311599] TCP: reno registered
[	0.311605] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[	0.311632] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[	0.311731] NET: Registered protocol family 1
[	0.311745] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[	0.311788] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[	0.311808] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[	0.312423] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[	0.313049] pci 0000:00:02.0: Boot video device
[	0.313101] PCI: CLS 64 bytes, default 64
[	0.313187] Trying to unpack rootfs image as initramfs...
[	0.597078] Freeing initrd memory: 17448K (ffff880035ddc000 - ffff880036ee6000)
[	0.662682] Scanning for low memory corruption every 60 seconds
[	0.662885] Initialise module verification
[	0.662925] audit: initializing netlink socket (disabled)
[	0.662937] type=2000 audit(1394932323.177:1): initialized
[	0.709531] bounce pool size: 64 pages
[	0.709550] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[	0.710612] zbud: loaded
[	0.710755] VFS: Disk quotas dquot_6.5.2
[	0.710800] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[	0.711299] fuse init (API version 7.22)
[	0.711364] msgmni has been set to 2990
[	0.712119] Key type asymmetric registered
[	0.712124] Asymmetric key parser 'x509' registered
[	0.712165] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[	0.712214] io scheduler noop registered
[	0.712217] io scheduler deadline registered (default)
[	0.712241] io scheduler cfq registered
[	0.712318] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[	0.712332] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[	0.712452] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[	0.712458] ACPI: Power Button [PWRF]
[	0.732551] GHES: HEST is not enabled!
[	0.732902] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[	0.733447] virtio-pci 0000:00:03.0: setting latency timer to 64
[	0.733838] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[	0.734546] virtio-pci 0000:00:05.0: setting latency timer to 64
[	0.735599] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[	0.736474] virtio-pci 0000:00:06.0: setting latency timer to 64
[	0.737756] virtio-pci 0000:00:07.0: setting latency timer to 64
[	0.738905] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[	0.765752] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[	0.776921] Linux agpgart interface v0.103
[	0.777972] brd: module loaded
[	0.778493] loop: module loaded
[	0.778655] virtio-pci 0000:00:05.0: irq 40 for MSI/MSI-X
[	0.778674] virtio-pci 0000:00:05.0: irq 41 for MSI/MSI-X
[	0.835687]  vda: vda1 vda2 < vda5 >
[	0.837175] virtio-pci 0000:00:07.0: irq 42 for MSI/MSI-X
[	0.837196] virtio-pci 0000:00:07.0: irq 43 for MSI/MSI-X
[	0.837684]  vdb: vdb1
[	0.838874] megasas: 06.600.18.00-rc1 Wed. May. 15 17:00:00 PDT 2013
[	0.838966] ata_piix 0000:00:01.1: version 2.13
[	0.852566] ata_piix 0000:00:01.1: setting latency timer to 64
[	0.852896] scsi0 : ata_piix
[	0.852967] scsi1 : ata_piix
[	0.852995] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14
[	0.852998] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15
[	0.853245] libphy: Fixed MDIO Bus: probed
[	0.853316] tun: Universal TUN/TAP device driver, 1.6
[	0.853319] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[	0.853515] virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
[	0.853533] virtio-pci 0000:00:03.0: irq 45 for MSI/MSI-X
[	0.853553] virtio-pci 0000:00:03.0: irq 46 for MSI/MSI-X
[	0.896212] PPP generic driver version 2.4.2
[	0.896276] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[	0.896279] ehci-pci: EHCI PCI platform driver
[	0.896299] ehci-platform: EHCI generic platform driver
[	0.896310] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[	0.896313] ohci-pci: OHCI PCI platform driver
[	0.896321] ohci-platform: OHCI generic platform driver
[	0.896327] uhci_hcd: USB Universal Host Controller Interface driver
[	0.897931] uhci_hcd 0000:00:01.2: setting latency timer to 64
[	0.897944] uhci_hcd 0000:00:01.2: UHCI Host Controller
[	0.897966] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[	0.898070] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
[	0.898204] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[	0.898208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[	0.898212] usb usb1: Product: UHCI Host Controller
[	0.898215] usb usb1: Manufacturer: Linux 3.11.0-18-generic uhci_hcd
[	0.898217] usb usb1: SerialNumber: 0000:00:01.2
[	0.898336] hub 1-0:1.0: USB hub found
[	0.898341] hub 1-0:1.0: 2 ports detected
[	0.898498] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[	0.899088] serio: i8042 KBD port at 0x60,0x64 irq 1
[	0.899097] serio: i8042 AUX port at 0x60,0x64 irq 12
[	0.899249] mousedev: PS/2 mouse device common for all mice
[	0.899535] rtc_cmos 00:00: RTC can wake from S4
[	0.899744] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[	0.900248] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[	0.900322] device-mapper: uevent: version 1.0.3
[	0.900384] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[	0.900662] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[	0.901000] cpuidle: using governor ladder
[	0.901003] cpuidle: using governor menu
[	0.901017] ledtrig-cpu: registered to indicate activity on CPUs
[	0.901093] TCP: cubic registered
[	0.901175] NET: Registered protocol family 10
[	0.901453] NET: Registered protocol family 17
[	0.901464] Key type dns_resolver registered
[	0.901662] Loading module verification certificates
[	0.902652] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 5465b24ef2efe2a79ebe0734c1d73e5f3e117661'
[	0.902667] registered taskstats version 1
[	0.915662] Key type trusted registered
[	0.920280] Key type encrypted registered
[	0.930237] AppArmor: AppArmor sha1 policy hashing enabled
[	0.930636]   Magic number: 6:453:205
[	0.930912] rtc_cmos 00:00: setting system clock to 2014-03-16 01:12:02 UTC (1394932322)
[	0.931025] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[	0.931029] EDD information not available.
[	1.080865] Freeing unused kernel memory: 1392K (ffffffff81d10000 - ffffffff81e6c000)
[	1.080882] Write protecting the kernel read-only data: 12288k
[	1.083053] Freeing unused kernel memory: 668K (ffff880001759000 - ffff880001800000)
[	1.083233] Freeing unused kernel memory: 20K (ffff880001bfb000 - ffff880001c00000)
[	1.709054] udevd[103]: starting version 175
[	1.828150] vesafb: module verification failed: signature and/or required key missing - tainting kernel
[	1.967334] vesafb: mode is 1024x768x24, linelength=3072, pages=0
[	1.967342] vesafb: scrolling: redraw
[	1.967346] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[	2.016064] vesafb: framebuffer at 0xfd000000, mapped to 0xffffc90000400000, using 2304k, total 2304k
[	2.016234] Console: switching to colour frame buffer device 128x48
[	2.020845] fb0: VESA VGA frame buffer device
[	2.416263] FDC 0 is a S82078B
[	2.717516] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
[	5.144003] hrtimer: interrupt took 60202751 ns
[	5.526593] init: ureadahead main process (256) terminated with status 5
[	7.691503] Adding 1046524k swap on /dev/vda5.  Priority:-1 extents:1 across:1046524k FS
[   10.564407] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.149524] udevd[334]: starting version 175
[   15.411923] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[   16.173952] EXT4-fs (vdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   17.019358] lp: driver loaded but no devices found
[   17.874326] RPC: Registered named UNIX socket transport module.
[   17.874329] RPC: Registered udp transport module.
[   17.874330] RPC: Registered tcp transport module.
[   17.874332] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   19.472599] parport_pc 00:04: reported by Plug and Play ACPI
[   20.102960] ppdev: user-space parallel port driver
[   20.569436] FS-Cache: Loaded
[   21.214336] FS-Cache: Netfs 'nfs' registered for caching
[   21.248470] [drm] Initialized drm 1.1.0 20060810
[   21.726048] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[   22.619351] WARNING: You are using an experimental version of the media stack.
[   22.619351]  As the driver is backported to an older kernel, it doesn't offer
[   22.619351]  enough quality for its usage in production.
[   22.619351]  Use it with care.
[   22.619351] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   22.619351]  bfd0306462fdbc5e0a8c6999aef9dde0f9745399 [media] v4l: Document timestamp buffer flag behaviour
[   22.619351]  309f4d62eda0e864c2d4eef536cc82e41931c3c5 [media] v4l: Copy timestamp source flags to destination on m2m devices
[   22.619351]  599b08929efe9b90e44b504454218a120bb062a0 [media] exynos-gsc, m2m-deinterlace, mx2_emmaprp: Copy v4l2_buffer data from src to dst
[   22.619351]  experimental: 44212a89d033cade1a5e0fddc9ec3a2e4c7c07e2 Add i2c_add_mux_adapter patch for kernels <= 3.4
[   23.086859] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   23.299371] Digital Devices PCIE bridge driver 0.9.12, Copyright (C) 2010-13 Digital Devices GmbH
[   23.445756] [drm] Capabilities:
[   23.445760] [drm]   Rect copy.
[   23.445761] [drm]   Cursor.
[   23.445762] [drm]   Cursor bypass.
[   23.445763] [drm]   Cursor bypass 2.
[   23.445765] [drm] VRAM at 0xfd000000 size is 16384 kiB
[   23.445766] [drm] MMIO at 0xfe000000 size is 64 kiB
[   23.445769] [drm] global init.
[   23.553017] [TTM] Zone  kernel: Available graphics memory: 766568 kiB
[   23.553021] [TTM] Initializing pool allocator
[   23.553025] [TTM] Initializing DMA pool allocator
[   23.553083] [drm:vmw_driver_load] *ERROR* Hardware has no pitchlock
[   23.553166] [TTM] Finalizing pool allocator
[   23.553169] [TTM] Finalizing DMA pool allocator
[   23.555195] [TTM] Zone  kernel: Used memory at exit: 0 kiB
[   23.558145] vmwgfx: probe of 0000:00:02.0 failed with error -38
[   23.578644] DDBridge driver detected: Digital Devices DVBCT V6.1 DVB adapter
[   23.578665] HW 0001000d REGMAP 00010004
[   23.578787] ddbridge 0000:00:04.0: irq 47 for MSI/MSI-X
[   23.992938] Port 0 (TAB 1): DUAL DVB-C/T
[   23.993891] Port 1 (TAB 2): NO MODULE
[   24.078287] Port 2 (TAB 3): NO MODULE
[   24.078977] DVB: registering new adapter (DDBridge)
[   24.078981] DVB: registering new adapter (DDBridge)
[   24.920891] stv0367 found
[   25.086962] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[   26.629803] nvidia: module license 'NVIDIA' taints kernel.
[   26.629808] Disabling lock debugging due to kernel taint
[   26.962702] tda18212dd: ChipID 4724 master
[   26.988911] tda18212dd: PowerState 02
[   27.098314] NVRM: No NVIDIA graphics adapter found!
[   28.006036] RFCal Log: 00 7d 7d 6f  79 7d 56 65  71 5a 62 67
[   28.042857] ddbridge 0000:00:04.0: DVB: registering adapter 0 frontend 0 (STV0367 DVB-C DVB-T)...
[   28.082794] stv0367 found
[   31.485419] tda18212dd: ChipID 4724 slave
[   31.485842] tda18212dd: PowerState 02
[   32.237662] RFCal Log: 7d 7c 7c 74  7b 7e 62 6d  76 67 6b 6f
[   32.259463] ddbridge 0000:00:04.0: DVB: registering adapter 1 frontend 0 (STV0367 DVB-C DVB-T)...
[   39.220962] init: failsafe main process (700) killed by TERM signal
[   47.379721] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   47.479609] NFSD: starting 90-second grace period (net ffffffff81cd2380)
[   48.929727] init: avahi-cups-reload main process (1576) terminated with status 1
[   53.976847] init: plymouth-stop pre-start process (1622) terminated with status 1
[   67.937707] init: wait-for-job-state (vdr-frontendvdr) main process (1748) killed by TERM signal
[   76.904018] [sched_delayed] sched: RT throttling activated
[  118.803099] BUG: soft lockup - CPU#0 stuck for 22s! [kworker/0:2:870]
[  118.803105] Modules linked in: i915 drm_kms_helper i2c_algo_bit video tda18212dd(OF) stv0367dd(OF) psmouse ddbridge(OF) vmwgfx nfsd dvb_core(OF) serio_raw ttm nfs_acl auth_rpcgss mac_hid i2c_piix4 cxd2099(OF) drm nfs virtio_balloon fscache ppdev parport_pc lockd sunrpc lp parport floppy vesafb(F)
[  118.803126] CPU: 0 PID: 870 Comm: kworker/0:2 Tainted: PF      	O 3.11.0-18-generic #32~precise1-Ubuntu
[  118.803128] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  118.803135] Workqueue: ddbridge input_work [ddbridge]
[  118.803137] task: ffff88005c065dc0 ti: ffff88005aa44000 task.ti: ffff88005aa44000
[  118.803138] RIP: 0010:[<ffffffff81748e09>]  [<ffffffff81748e09>] _raw_spin_unlock_irqrestore+0x19/0x30
[  118.803144] RSP: 0018:ffff88005aa45d40  EFLAGS: 00000282
[  118.803146] RAX: ffffc900014f13e0 RBX: 0000000000000001 RCX: 0000000000000000
[  118.803147] RDX: 0000000000000000 RSI: 0000000000000282 RDI: 0000000000000282
[  118.803148] RBP: ffff88005aa45d48 R08: 0000000000000000 R09: 0000000000000000
[  118.803149] R10: 0000000000000000 R11: 0000000000000000 R12: ffffc900014f13e0
[  118.803151] R13: 000000000000177a R14: ffffc90001531000 R15: ffff88005aa45ca8
[  118.803160] FS:  00007f89127fc700(0000) GS:ffff88005fc00000(0000) knlGS:0000000000000000
[  118.803161] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  118.803163] CR2: 00007f89100f5f80 CR3: 0000000001c0d000 CR4: 00000000000006f0
[  118.803173] Stack:
[  118.803174]  ffff88005b67ed80 ffff88005aa45d88 ffffffffa01893a3 ffff88005aa45d68
[  118.803177]  ffffc900014f9970 ffffc900014f9970 ffffc900014f1000 0000000000000000
[  118.803179]  ffffc900014f1218 ffff88005aa45de8 ffffffffa022eefb 0000000000014580
[  118.803181] Call Trace:
[  118.803189]  [<ffffffffa01893a3>] dvb_dmx_swfilter_packets+0x83/0xa0 [dvb_core]
[  118.803193]  [<ffffffffa022eefb>] input_work+0x11b/0x2a0 [ddbridge]
[  118.803197]  [<ffffffff81081190>] process_one_work+0x170/0x4a0
[  118.803199]  [<ffffffff81082251>] worker_thread+0x121/0x390
[  118.803201]  [<ffffffff81082130>] ? manage_workers.isra.21+0x170/0x170
[  118.803204]  [<ffffffff81089170>] kthread+0xc0/0xd0
[  118.803207]  [<ffffffff810890b0>] ? flush_kthread_worker+0xb0/0xb0
[  118.803210]  [<ffffffff8175212c>] ret_from_fork+0x7c/0xb0
[  118.803212]  [<ffffffff810890b0>] ? flush_kthread_worker+0xb0/0xb0
[  118.803214] Code: 66 90 5d c3 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 53 48 89 f3 e8 2e 82 90 ff 66 90 48 89 df 57 9d <66> 66 90 66 90 5b 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 
[  167.369986] BUG: soft lockup - CPU#0 stuck for 25s! [kworker/0:2:870]
[  167.369991] Modules linked in: i915 drm_kms_helper i2c_algo_bit video tda18212dd(OF) stv0367dd(OF) psmouse ddbridge(OF) vmwgfx nfsd dvb_core(OF) serio_raw ttm nfs_acl auth_rpcgss mac_hid i2c_piix4 cxd2099(OF) drm nfs virtio_balloon fscache ppdev parport_pc lockd sunrpc lp parport floppy vesafb(F)
[  167.370011] CPU: 0 PID: 870 Comm: kworker/0:2 Tainted: PF      	O 3.11.0-18-generic #32~precise1-Ubuntu
[  167.370013] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  167.370020] Workqueue: ddbridge input_work [ddbridge]
[  167.370022] task: ffff88005c065dc0 ti: ffff88005aa44000 task.ti: ffff88005aa44000
[  167.370024] RIP: 0010:[<ffffffff81748e09>]  [<ffffffff81748e09>] _raw_spin_unlock_irqrestore+0x19/0x30
[  167.370030] RSP: 0018:ffff88005aa45d40  EFLAGS: 00000282
[  167.370031] RAX: ffffc900014f13e0 RBX: 0000000000000001 RCX: 0000000000000000
[  167.370033] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 0000000000000282
[  167.370034] RBP: ffff88005aa45d48 R08: 0000000000000000 R09: 0000000000000000
[  167.370035] R10: 0000000000000000 R11: 0000000000000000 R12: ffffc900014f13e0
[  167.370036] R13: 000000000000177a R14: ffffc90001531000 R15: ffff88005aa45ca8
[  167.370046] FS:  00007f88d57fa700(0000) GS:ffff88005fc00000(0000) knlGS:0000000000000000
[  167.370047] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  167.370049] CR2: 00007f9310b1a420 CR3: 0000000001c0d000 CR4: 00000000000006f0
[  167.370059] Stack:
[  167.370060]  ffff88005b9fed80 ffff88005aa45d88 ffffffffa01893a3 ffff88005aa45d68
[  167.370063]  ffffc900014f9970 ffffc900014f9970 ffffc900014f1000 0000000000000000
[  167.370065]  ffffc900014f1218 ffff88005aa45de8 ffffffffa022eefb 0000000000014580
[  167.370067] Call Trace:
[  167.370075]  [<ffffffffa01893a3>] dvb_dmx_swfilter_packets+0x83/0xa0 [dvb_core]
[  167.370079]  [<ffffffffa022eefb>] input_work+0x11b/0x2a0 [ddbridge]
[  167.370083]  [<ffffffff81081190>] process_one_work+0x170/0x4a0
[  167.370085]  [<ffffffff81082251>] worker_thread+0x121/0x390
[  167.370087]  [<ffffffff81082130>] ? manage_workers.isra.21+0x170/0x170
[  167.370090]  [<ffffffff81089170>] kthread+0xc0/0xd0
[  167.370093]  [<ffffffff810890b0>] ? flush_kthread_worker+0xb0/0xb0
[  167.370096]  [<ffffffff8175212c>] ret_from_fork+0x7c/0xb0
[  167.370098]  [<ffffffff810890b0>] ? flush_kthread_worker+0xb0/0xb0
[  167.370099] Code: 66 90 5d c3 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 53 48 89 f3 e8 2e 82 90 ff 66 90 48 89 df 57 9d <66> 66 90 66 90 5b 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 
[  194.533445] BUG: soft lockup - CPU#0 stuck for 22s! [kworker/0:2:870]
[  194.533451] Modules linked in: i915 drm_kms_helper i2c_algo_bit video tda18212dd(OF) stv0367dd(OF) psmouse ddbridge(OF) vmwgfx nfsd dvb_core(OF) serio_raw ttm nfs_acl auth_rpcgss mac_hid i2c_piix4 cxd2099(OF) drm nfs virtio_balloon fscache ppdev parport_pc lockd sunrpc lp parport floppy vesafb(F)
[  194.533470] CPU: 0 PID: 870 Comm: kworker/0:2 Tainted: PF      	O 3.11.0-18-generic #32~precise1-Ubuntu
[  194.533472] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  194.533479] Workqueue: ddbridge input_work [ddbridge]
[  194.533481] task: ffff88005c065dc0 ti: ffff88005aa44000 task.ti: ffff88005aa44000
[  194.533483] RIP: 0010:[<ffffffff81748e09>]  [<ffffffff81748e09>] _raw_spin_unlock_irqrestore+0x19/0x30
[  194.533489] RSP: 0018:ffff88005aa45d40  EFLAGS: 00000282
[  194.533490] RAX: ffffc900014f13e0 RBX: 0000000000000001 RCX: 0000000000000000
[  194.533492] RDX: ffffc900014f11d0 RSI: 0000000000000282 RDI: 0000000000000282
[  194.533493] RBP: ffff88005aa45d48 R08: 0000000000000000 R09: 0000000000000000
[  194.533494] R10: 0000000000000000 R11: 0000000000000000 R12: ffffc900014f13e0
[  194.533496] R13: 0000000000001786 R14: ffffc900015344c8 R15: ffff88005aa45ca8
[  194.533507] FS:  00007f88d57fa700(0000) GS:ffff88005fc00000(0000) knlGS:0000000000000000
[  194.533508] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  194.533510] CR2: 00007f9310b1a420 CR3: 0000000001c0d000 CR4: 00000000000006f0
[  194.533520] Stack:
[  194.533521]  ffff88005b9fed80 ffff88005aa45d88 ffffffffa01893a3 ffff88005aa45d68
[  194.533523]  ffffc900014f9970 ffffc900014f9970 ffffc900014f1000 0000000000000000
[  194.533526]  ffffc900014f1218 ffff88005aa45de8 ffffffffa022eefb 0000000000014580
[  194.533528] Call Trace:
[  194.533536]  [<ffffffffa01893a3>] dvb_dmx_swfilter_packets+0x83/0xa0 [dvb_core]
[  194.533539]  [<ffffffffa022eefb>] input_work+0x11b/0x2a0 [ddbridge]
[  194.533543]  [<ffffffff81081190>] process_one_work+0x170/0x4a0
[  194.533545]  [<ffffffff81082251>] worker_thread+0x121/0x390
[  194.533548]  [<ffffffff81082130>] ? manage_workers.isra.21+0x170/0x170
[  194.533550]  [<ffffffff81089170>] kthread+0xc0/0xd0
[  194.533553]  [<ffffffff810890b0>] ? flush_kthread_worker+0xb0/0xb0
[  194.533556]  [<ffffffff8175212c>] ret_from_fork+0x7c/0xb0
[  194.533559]  [<ffffffff810890b0>] ? flush_kthread_worker+0xb0/0xb0
[  194.533560] Code: 66 90 5d c3 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 53 48 89 f3 e8 2e 82 90 ff 66 90 48 89 df 57 9d <66> 66 90 66 90 5b 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 
[  197.960792] INFO: rcu_sched self-detected stall on CPU { 0}  (t=15437 jiffies g=1807 c=1806 q=0)
[  197.960792] sending NMI to all CPUs:
[  197.960792] NMI backtrace for cpu 0
[  197.960792] CPU: 0 PID: 870 Comm: kworker/0:2 Tainted: PF      	O 3.11.0-18-generic #32~precise1-Ubuntu
[  197.960792] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  197.960792] Workqueue: ddbridge input_work [ddbridge]
[  197.960792] task: ffff88005c065dc0 ti: ffff88005aa44000 task.ti: ffff88005aa44000
[  197.960792] RIP: 0010:[<ffffffff810503ba>]  [<ffffffff810503ba>] native_write_msr_safe+0xa/0x10
[  197.960792] RSP: 0018:ffff88005fc03cd8  EFLAGS: 00000046
[  197.960792] RAX: 0000000000000400 RBX: 0000000000000000 RCX: 0000000000000830
[  197.960792] RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000830
[  197.960792] RBP: ffff88005fc03cd8 R08: ffffffff81d041e8 R09: 0000000000000000
[  197.960792] R10: 0000000000000262 R11: 0000000000000261 R12: ffffffff81d041e0
[  197.960792] R13: 0000000000000000 R14: 000000000000b06a R15: 0000000000000002
[  197.960792] FS:  00007f88d57fa700(0000) GS:ffff88005fc00000(0000) knlGS:0000000000000000
[  197.960792] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  197.960792] CR2: 00007f9310b1a420 CR3: 0000000001c0d000 CR4: 00000000000006f0
[  197.960792] Stack:
[  197.960792]  ffff88005fc03d38 ffffffff8104928c ffff88005fc03d48 0000000000000096
[  197.960792]  0000000000000002 0008000000000008 ffff88005fc03d58 0000000000002710
[  197.960792]  0000000000000000 ffffffff81d04200 0000000000000000 0000000000000000
[  197.960792] Call Trace:
[  197.960792]  <IRQ> 
[  197.960792]  [<ffffffff8104928c>] __x2apic_send_IPI_mask+0xac/0xd0
[  197.960792]  [<ffffffff810492cc>] x2apic_send_IPI_all+0x1c/0x20
[  197.960792]  [<ffffffff810456f1>] arch_trigger_all_cpu_backtrace+0x61/0xa0
[  197.960792]  [<ffffffff811060f4>] print_cpu_stall+0xd4/0x140
[  197.960792]  [<ffffffff81106af7>] __rcu_pending+0x77/0x1d0
[  197.960792]  [<ffffffff8110843d>] rcu_check_callbacks+0xed/0x1b0
[  197.960792]  [<ffffffff810742e8>] update_process_times+0x48/0x80
[  197.960792]  [<ffffffff810c5d63>] tick_sched_handle.isra.10+0x33/0x70
[  197.960792]  [<ffffffff810c5e8c>] tick_sched_timer+0x4c/0x80
[  197.960792]  [<ffffffff8108ca48>] __run_hrtimer+0x78/0x230
[  197.960792]  [<ffffffff810c5e40>] ? tick_nohz_handler+0xa0/0xa0
[  197.960792]  [<ffffffff8108d24f>] hrtimer_interrupt+0xff/0x240
[  197.960792]  [<ffffffff81043a7b>] local_apic_timer_interrupt+0x3b/0x60
[  197.960792]  [<ffffffff817545a5>] smp_apic_timer_interrupt+0x45/0x60
[  197.960792]  [<ffffffff81752f1d>] apic_timer_interrupt+0x6d/0x80
[  197.960792]  <EOI> 
[  197.960792]  [<ffffffff81748e09>] ? _raw_spin_unlock_irqrestore+0x19/0x30
[  197.960792]  [<ffffffffa01893a3>] dvb_dmx_swfilter_packets+0x83/0xa0 [dvb_core]
[  197.960792]  [<ffffffffa022eefb>] input_work+0x11b/0x2a0 [ddbridge]
[  197.960792]  [<ffffffff81081190>] process_one_work+0x170/0x4a0
[  197.960792]  [<ffffffff81082251>] worker_thread+0x121/0x390
[  197.960792]  [<ffffffff81082130>] ? manage_workers.isra.21+0x170/0x170
[  197.960792]  [<ffffffff81089170>] kthread+0xc0/0xd0
[  197.960792]  [<ffffffff810890b0>] ? flush_kthread_worker+0xb0/0xb0
[  197.960792]  [<ffffffff8175212c>] ret_from_fork+0x7c/0xb0
[  197.960792]  [<ffffffff810890b0>] ? flush_kthread_worker+0xb0/0xb0
[  197.960792] Code: 00 55 89 f9 48 89 e5 0f 32 45 31 c0 89 c7 48 89 d0 44 89 06 48 c1 e0 20 89 f9 48 09 c8 5d c3 66 90 55 89 f0 89 f9 48 89 e5 0f 30 <31> c0 5d c3 66 90 55 89 f9 48 89 e5 0f 33 89 c7 48 89 d0 48 c1 
[  201.294128] NMI backtrace for cpu 1
[  201.294128] CPU: 1 PID: 1870 Comm: TS buffer on de Tainted: PF      	O 3.11.0-18-generic #32~precise1-Ubuntu
[  201.294128] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  201.294128] task: ffff88005a6cc650 ti: ffff88005a6d2000 task.ti: ffff88005a6d2000
[  201.294128] RIP: 0010:[<ffffffff81050ff2>]  [<ffffffff81050ff2>] __ticket_spin_lock+0x22/0x30
[  201.294128] RSP: 0018:ffff88005a6d39e8  EFLAGS: 00000097
[  201.294128] RAX: 000000000000d7a1 RBX: 0000000000000282 RCX: 0000000000000000
[  201.294128] RDX: 000000000000d7a2 RSI: 0000000000000282 RDI: ffffc900014f11c8
[  201.294128] RBP: ffff88005a6d39e8 R08: ffff88005b251b38 R09: 000000000000001c
[  201.294128] R10: 000000007fffffff R11: 0000000000000293 R12: ffff88005a6d3bd8
[  201.294128] R13: 0000000000000000 R14: ffff88005a6d3b98 R15: 0000000000000000
[  201.294128] FS:  00007f88d57fa700(0000) GS:ffff88005fd00000(0000) knlGS:0000000000000000
[  201.294128] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  201.294128] CR2: 00007f6e943fc060 CR3: 000000005a031000 CR4: 00000000000006e0
[  201.294128] Stack:
[  201.294128]  ffff88005a6d39f8 ffffffff81051089 ffff88005a6d3a18 ffffffff8174906e
[  201.294128]  ffffc900014f11c8 ffff88005a6d3bd8 ffff88005a6d3a38 ffffffff81089c03
[  201.294128]  ffff88005b251b00 ffffc900014f11c8 ffff88005a6d3a78 ffffffff811c7c95
[  201.294128] Call Trace:
[  201.294128]  [<ffffffff81051089>] default_spin_lock_flags+0x9/0x10
[  201.294128]  [<ffffffff8174906e>] _raw_spin_lock_irqsave+0x2e/0x40
[  201.294128]  [<ffffffff81089c03>] add_wait_queue+0x23/0x60
[  201.294128]  [<ffffffff811c7c95>] __pollwait+0x75/0xf0
[  201.294128]  [<ffffffffa0185f9a>] dvb_dvr_poll+0x9a/0xc0 [dvb_core]
[  201.294128]  [<ffffffff811c7fee>] do_poll.isra.7+0x14e/0x3a0
[  201.294128]  [<ffffffff811c9179>] do_sys_poll+0x199/0x200
[  201.294128]  [<ffffffff811c7c20>] ? poll_freewait+0xe0/0xe0
[  201.294128]  [<ffffffff811c7d10>] ? __pollwait+0xf0/0xf0
[  201.294128]  [<ffffffff8101260d>] ? __switch_to+0x16d/0x4b0
[  201.294128]  [<ffffffff8109e882>] ? wake_affine+0x132/0x270
[  201.294128]  [<ffffffff8174d627>] ? do_page_fault+0x37/0x70
[  201.294128]  [<ffffffff8174ccc5>] ? do_async_page_fault+0x35/0xa0
[  201.294128]  [<ffffffff81749708>] ? async_page_fault+0x28/0x30
[  201.294128]  [<ffffffff81381090>] ? copy_user_generic_string+0x30/0x40
[  201.294128]  [<ffffffffa01862bd>] ? dvb_dmxdev_buffer_read.isra.2+0x6d/0x1d0 [dvb_core]
[  201.294128]  [<ffffffff8105014f>] ? kvm_clock_read+0x1f/0x30
[  201.294128]  [<ffffffff81050169>] ? kvm_clock_get_cycles+0x9/0x10
[  201.294128]  [<ffffffff810bcabc>] ? ktime_get_ts+0x4c/0xe0
[  201.294128]  [<ffffffff811c82c5>] ? poll_select_set_timeout+0x85/0xa0
[  201.294128]  [<ffffffff811c92bb>] SyS_poll+0x6b/0x100
[  201.294128]  [<ffffffff817521dd>] system_call_fastpath+0x1a/0x1f
[  201.294128] Code: 90 90 90 90 90 90 90 90 90 55 b8 00 00 01 00 48 89 e5 f0 0f c1 07 89 c2 c1 ea 10 66 39 c2 74 13 66 0f 1f 84 00 00 00 00 00 f3 90 <0f> b7 07 66 39 d0 75 f6 5d c3 0f 1f 40 00 8b 17 55 31 c0 48 89 
[  201.294128] INFO: rcu_sched detected stalls on CPUs/tasks: { 0} (detected by 1, t=15437 jiffies, g=1807, c=1806, q=0)
[  201.312052] DDBridge I2C timeout, card 0, port 0
[  201.312062] ddbridge 0000:00:04.0: DDBridge IRS 00000101
[  201.312071] tda18212: i2c_write error

Display More

Diggo

Bisher ohne Kaltstart... noch mit dem Bootparameter pci=nomsi:

Display Spoiler

Code

[   11.382233] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.836250] udevd[333]: starting version 175
[   18.565673] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[   19.622450] lp: driver loaded but no devices found
[   20.305979] parport_pc 00:04: reported by Plug and Play ACPI
[   20.412168] EXT4-fs (vdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   21.430530] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[   21.692127] [drm] Initialized drm 1.1.0 20060810
[   22.355549] WARNING: You are using an experimental version of the media stack.
[   22.355549]  As the driver is backported to an older kernel, it doesn't offer
[   22.355549]  enough quality for its usage in production.
[   22.355549]  Use it with care.
[   22.355549] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   22.355549]  bfd0306462fdbc5e0a8c6999aef9dde0f9745399 [media] v4l: Document timestamp buffer flag behaviour
[   22.355549]  309f4d62eda0e864c2d4eef536cc82e41931c3c5 [media] v4l: Copy timestamp source flags to destination on m2m devices
[   22.355549]  599b08929efe9b90e44b504454218a120bb062a0 [media] exynos-gsc, m2m-deinterlace, mx2_emmaprp: Copy v4l2_buffer data from src to dst
[   22.355549]  experimental: 44212a89d033cade1a5e0fddc9ec3a2e4c7c07e2 Add i2c_add_mux_adapter patch for kernels <= 3.4
[   22.539222] RPC: Registered named UNIX socket transport module.
[   22.539225] RPC: Registered udp transport module.
[   22.539227] RPC: Registered tcp transport module.
[   22.539228] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   23.011850] Digital Devices PCIE bridge driver 0.9.12, Copyright (C) 2010-13 Digital Devices GmbH
[   23.979712] DDBridge driver detected: Digital Devices DVBCT V6.1 DVB adapter
[   23.979736] HW 0001000d REGMAP 00010004
[   24.154972] FS-Cache: Loaded
[   24.810626] ppdev: user-space parallel port driver
[   24.828233] Port 0 (TAB 1): DUAL DVB-C/T
[   24.868154] FS-Cache: Netfs 'nfs' registered for caching
[   24.968291] Port 1 (TAB 2): NO MODULE
[   25.492188] Port 2 (TAB 3): NO MODULE
[   25.493403] DVB: registering new adapter (DDBridge)
[   25.493409] DVB: registering new adapter (DDBridge)
[   26.581164] stv0367 found
[   27.082351] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   27.164000] stv0367: i2c_write error
[   27.164321] stv0367: i2c_write error
[   27.164603] stv0367: i2c_write error
[   27.164661] stv0367: i2c_write error
[   27.164704] stv0367: i2c_write error
[   27.164742] stv0367: i2c_write error
[   27.164780] stv0367: i2c_write error
[   27.164818] stv0367: i2c_write error
[   27.164856] stv0367: i2c_write error
[   27.164893] stv0367: i2c_write error
[   27.164930] stv0367: i2c_write error
[   27.164968] stv0367: i2c_write error
[   27.165005] stv0367: i2c_write error
[   27.165043] stv0367: i2c_write error
[   27.165080] stv0367: i2c_write error
[   27.165118] stv0367: i2c_write error
[   27.165155] stv0367: i2c_write error
[   27.165191] stv0367: i2c_write error
[   27.165228] stv0367: i2c_write error
[   27.165265] stv0367: i2c_write error
[   27.165303] stv0367: i2c_write error
[   27.165384] stv0367: i2c_write error
[   27.165424] stv0367: i2c_write error
[   27.165462] stv0367: i2c_write error
[   27.165500] stv0367: i2c_write error
[   27.165554] stv0367: i2c_write error
[   27.165804] stv0367: i2c_write error
[   27.165867] stv0367: i2c_write error
[   27.165906] stv0367: i2c_write error
[   27.165944] stv0367: i2c_write error
[   27.165982] stv0367: i2c_write error
[   27.166019] stv0367: i2c_write error
[   27.166056] stv0367: i2c_write error
[   27.166094] stv0367: i2c_write error
[   28.009245] nvidia: module license 'NVIDIA' taints kernel.
[   28.009251] Disabling lock debugging due to kernel taint
[   28.115753] NVRM: No NVIDIA graphics adapter found!
[   28.176694] stv0367: i2c_write error
[   28.176765] tda18212dd: i2c_read error
[   28.176798] tda18212dd: i2c_read error
[   28.176841] stv0367: i2c_write error
[   28.176844] No TDA18212 found!
[   28.176905] port_attach on port 0 failed
[   28.177498] fail3
[   28.177549] fail2
[   28.177678] fail1
[   28.177734] fail0
[   28.177774] fail
[   28.178062] ddbridge: probe of 0000:00:04.0 failed with error -1
[   28.248439] [drm] Capabilities:
[   28.248444] [drm]   Rect copy.
[   28.248445] [drm]   Cursor.
[   28.248446] [drm]   Cursor bypass.
[   28.248447] [drm]   Cursor bypass 2.
[   28.248448] [drm] VRAM at 0xfd000000 size is 16384 kiB
[   28.248450] [drm] MMIO at 0xfe000000 size is 64 kiB
[   28.248453] [drm] global init.
[   28.253374] [TTM] Zone  kernel: Available graphics memory: 766568 kiB
[   28.253377] [TTM] Initializing pool allocator
[   28.253383] [TTM] Initializing DMA pool allocator
[   28.253414] [drm:vmw_driver_load] *ERROR* Hardware has no pitchlock
[   28.253507] [TTM] Finalizing pool allocator
[   28.253510] [TTM] Finalizing DMA pool allocator
[   28.253553] [TTM] Zone  kernel: Used memory at exit: 0 kiB
[   28.255264] vmwgfx: probe of 0000:00:02.0 failed with error -38
[   29.086353] init: plymouth-upstart-bridge main process (911) killed by TERM signal
[   29.530722] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
[   37.319917] init: failsafe main process (741) killed by TERM signal
[   45.167642] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   45.188930] NFSD: starting 90-second grace period (net ffffffff81cd2380)
[   45.999169] init: avahi-cups-reload main process (1306) terminated with status 1
[   49.285742] init: plymouth-stop pre-start process (1353) terminated with status 1
[   64.389481] init: wait-for-job-state (vdr-frontendvdr) main process (1369) killed by TERM signal

Display More

ich muss leider erstmal weg. Ich teste es dann nochmal ohne den Bootparameter. (wollte nur die Notiz schonmal ablegen)

*edit*

so doch noch schnell erledigt -> dieses mal noch pci=nomsi und irqpoll rausgeworfen aus grub.

Display Spoiler

Code

[	4.226028] hrtimer: interrupt took 49406481 ns
[	6.850102] init: ureadahead main process (254) terminated with status 5
[	9.025577] Adding 1046524k swap on /dev/vda5.  Priority:-1 extents:1 across:1046524k FS
[   14.503471] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.965559] udevd[332]: starting version 175
[   16.172264] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[   17.361960] EXT4-fs (vdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   21.048124] lp: driver loaded but no devices found
[   22.022051] RPC: Registered named UNIX socket transport module.
[   22.022055] RPC: Registered udp transport module.
[   22.022056] RPC: Registered tcp transport module.
[   22.022057] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   23.488196] FS-Cache: Loaded
[   24.062074] FS-Cache: Netfs 'nfs' registered for caching
[   24.720372] parport_pc 00:04: reported by Plug and Play ACPI
[   25.773661] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   26.179417] WARNING: You are using an experimental version of the media stack.
[   26.179417]  As the driver is backported to an older kernel, it doesn't offer
[   26.179417]  enough quality for its usage in production.
[   26.179417]  Use it with care.
[   26.179417] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   26.179417]  bfd0306462fdbc5e0a8c6999aef9dde0f9745399 [media] v4l: Document timestamp buffer flag behaviour
[   26.179417]  309f4d62eda0e864c2d4eef536cc82e41931c3c5 [media] v4l: Copy timestamp source flags to destination on m2m devices
[   26.179417]  599b08929efe9b90e44b504454218a120bb062a0 [media] exynos-gsc, m2m-deinterlace, mx2_emmaprp: Copy v4l2_buffer data from src to dst
[   26.179417]  experimental: 44212a89d033cade1a5e0fddc9ec3a2e4c7c07e2 Add i2c_add_mux_adapter patch for kernels <= 3.4
[   26.226032] [drm] Initialized drm 1.1.0 20060810
[   26.233437] ppdev: user-space parallel port driver
[   27.069180] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[   27.575290] Digital Devices PCIE bridge driver 0.9.12, Copyright (C) 2010-13 Digital Devices GmbH
[   27.594767] DDBridge driver detected: Digital Devices DVBCT V6.1 DVB adapter
[   27.594793] HW 0001000d REGMAP 00010004
[   27.594907] ddbridge 0000:00:04.0: irq 47 for MSI/MSI-X
[   27.896224] Port 0 (TAB 1): NO MODULE
[   27.906001] Port 1 (TAB 2): NO MODULE
[   27.907229] nvidia: module license 'NVIDIA' taints kernel.
[   27.907235] Disabling lock debugging due to kernel taint
[   27.969197] Port 2 (TAB 3): NO MODULE
[   28.189184] [drm] Capabilities:
[   28.189190] [drm]   Rect copy.
[   28.189191] [drm]   Cursor.
[   28.189192] [drm]   Cursor bypass.
[   28.189193] [drm]   Cursor bypass 2.
[   28.189194] [drm] VRAM at 0xfd000000 size is 16384 kiB
[   28.189196] [drm] MMIO at 0xfe000000 size is 64 kiB
[   28.189205] [drm] global init.
[   28.205663] [TTM] Zone  kernel: Available graphics memory: 766568 kiB
[   28.205666] [TTM] Initializing pool allocator
[   28.205670] [TTM] Initializing DMA pool allocator
[   28.205731] [drm:vmw_driver_load] *ERROR* Hardware has no pitchlock
[   28.205792] [TTM] Finalizing pool allocator
[   28.205795] [TTM] Finalizing DMA pool allocator
[   28.205836] [TTM] Zone  kernel: Used memory at exit: 0 kiB
[   28.238006] vmwgfx: probe of 0000:00:02.0 failed with error -38
[   28.604295] NVRM: No NVIDIA graphics adapter found!
[   30.043852] init: plymouth-upstart-bridge main process (865) terminated with status 1
[   33.252327] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
[   39.047650] init: failsafe main process (754) killed by TERM signal
[   50.072394] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   50.096080] NFSD: starting 90-second grace period (net ffffffff81cd2380)
[   50.619477] init: avahi-cups-reload main process (1272) terminated with status 1
[   54.462180] init: plymouth-stop pre-start process (1318) terminated with status 1
[   67.882637] init: wait-for-job-state (vdr-frontendvdr) main process (1335) killed by TERM signal

Display More

Sender kann ich noch nicht eintunen... naja ich probier mal wie das verhalten nach nem Kaltstart ist. Wie dann das Verhalten aussieht. Ich schreib wieder

Danke nochmal! Ich dachte ich wär mit 2 Uhr morgens schon einer der späteren Gesellen hier im Board

Diggo

Wo ich hier lese, dass ihr alle die Karte (gut, als S2 Version) im Einsatz habt... hat jemand ne Idee, wie ich mit meiner neuen CT v6.1 beim Treiberbau gepaart mit KVM weiterkommen könnte? Hab bisher dazu nen kleinen Monolog verfasst -> Emergency Exit bei Aufnahmen / CineCT Problem?

Diggo

Nach weiterem Suchen im Forum scheint mir mein Problem eher ursächlich ähnlich zu diesem Thread zu sein: [solved] CINE CT 6.1, i2c-timeout, IRS 00000301 mit media_build_experimental
Nachdem ich den Kernelparameter eingefügt hatte, zeigte sich das gleiche Bild wie im genannten Thread.
Ich probier jetzt erstmal die dkms zu entfernen und dann nochmal den UFO Treiber mit auskommentieretem CONFIG_PCI_MSI zu bauen

*edit*

wenn ich die Datei suche, die im als gelöst markierten Thread geändert werden soll, ist die wohl schon nicht mehr an Ort und Stelle. Greppe ich jedoch nach CONFIG_PCI_MSI finde ich einiges. Leider jedoch ist das schon alles wieder einkommentiert, sodass ich jetzt ehrlich gesagt nicht weiss, wie ich dem Treiber sagen kann, er soll darauf verzichten (?). Jemand ne Idee wie ich weitermachen könnte? Ich werde wohl morgen tagsüber mal die Karte in nen anderen Computer stecken und gucken, ob sie da auch nur durch Kaltstarts zum laufen zu kriegen ist . Für jede Hilfe, das Ding doch noch im Server rennen zu lassen bin ich natürlich dankbar!

Code

root@VDRServ001:~/ufotreiber/media_build_experimental# grep -R CONFIG_PCI_MSI *
experimental/v4l-dvb-saa716x/linux/drivers/media/dvb/ngene/ngene-core.c:#ifdef CONFIG_PCI_MSI
experimental/v4l-dvb-saa716x/linux/drivers/media/dvb/ngene/ngene-core.c:#ifdef CONFIG_PCI_MSI
experimental/v4l-dvb-saa716x/linux/drivers/media/dvb/ngene/ngene-core.c:#ifdef CONFIG_PCI_MSI
experimental/v4l-dvb-saa716x/v4l/compat.h:#ifndef CONFIG_PCI_MSI
experimental/dddvb/ddbridge/ddbridge-i2c.c:#ifdef CONFIG_PCI_MSI
experimental/dddvb/ddbridge/ddbridge.c:#undef CONFIG_PCI_MSI
experimental/dddvb/ddbridge/ddbridge.c:#ifdef CONFIG_PCI_MSI
experimental/dddvb/ddbridge/ddbridge.c:#ifdef CONFIG_PCI_MSI
experimental/oe/ngene/ngene-core.c:#ifdef CONFIG_PCI_MSI
experimental/oe/ngene/ngene-core.c:#ifdef CONFIG_PCI_MSI
experimental/oe/ngene/ngene-core.c:#ifdef CONFIG_PCI_MSI
linux/drivers/media/pci/ddbridge/ddbridge-i2c.c:#ifdef CONFIG_PCI_MSI
linux/drivers/media/pci/ddbridge/ddbridge.c:#undef CONFIG_PCI_MSI
linux/drivers/media/pci/ddbridge/ddbridge.c:#ifdef CONFIG_PCI_MSI
linux/drivers/media/pci/ddbridge/ddbridge.c:#ifdef CONFIG_PCI_MSI
linux/drivers/media/pci/ngene/ngene-core.c:#ifdef CONFIG_PCI_MSI
linux/drivers/media/pci/ngene/ngene-core.c:#ifdef CONFIG_PCI_MSI
linux/drivers/media/pci/ngene/ngene-core.c:#ifdef CONFIG_PCI_MSI
v4l/compat.h:#ifndef CONFIG_PCI_MSI

Display More

Diggo

Hallo Markus,

hast Du da mittlerweile neue Erkenntnisse?

Ich habe scheinbar ein ähnliches/gleiches Problem unter KVM mit einer durchgereichten Cine6 mit DVB-C -> Emergency Exit bei Aufnahmen

Diggo

Hmm... also es lief wieder mal kurz. Jetzt ist die Karte wieder ausgestiegen. Wenn ich die Dom0 nicht herunterfahre und nur die DomU neu starte, zeigt sich folgendes Bild in Dmesg.

Display Spoiler

Code

[	4.271357] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
[	7.505877] init: ureadahead main process (253) terminated with status 5
[	8.915054] Adding 1046524k swap on /dev/vda5.  Priority:-1 extents:1 across:1046524k FS
[   10.032941] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.473117] udevd[331]: starting version 175
[   12.646102] lp: driver loaded but no devices found
[   13.048118] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[   13.134750] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[   14.327358] parport_pc 00:04: reported by Plug and Play ACPI
[   14.681993] EXT4-fs (vdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   15.358707] [drm] Initialized drm 1.1.0 20060810
[   16.185335] hrtimer: interrupt took 56769455 ns
[   16.237467] ppdev: user-space parallel port driver
[   16.703087] WARNING: You are using an experimental version of the media stack.
[   16.703087]  As the driver is backported to an older kernel, it doesn't offer
[   16.703087]  enough quality for its usage in production.
[   16.703087]  Use it with care.
[   16.703087] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.703087]  bfd0306462fdbc5e0a8c6999aef9dde0f9745399 [media] v4l: Document timestamp buffer flag behaviour
[   16.703087]  309f4d62eda0e864c2d4eef536cc82e41931c3c5 [media] v4l: Copy timestamp source flags to destination on m2m devices
[   16.703087]  599b08929efe9b90e44b504454218a120bb062a0 [media] exynos-gsc, m2m-deinterlace, mx2_emmaprp: Copy v4l2_buffer data from src to dst
[   16.703087]  experimental: 44212a89d033cade1a5e0fddc9ec3a2e4c7c07e2 Add i2c_add_mux_adapter patch for kernels <= 3.4
[   17.809109] RPC: Registered named UNIX socket transport module.
[   17.809113] RPC: Registered udp transport module.
[   17.809114] RPC: Registered tcp transport module.
[   17.809115] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   18.039121] Digital Devices PCIE bridge driver 0.9.12, Copyright (C) 2010-13 Digital Devices GmbH
[   18.364449] DDBridge driver detected: Digital Devices DVBCT V6.1 DVB adapter
[   18.364472] HW 0001000d REGMAP 00010004
[   18.986403] FS-Cache: Loaded
[   19.353177] FS-Cache: Netfs 'nfs' registered for caching
[   19.362565] DDBridge I2C timeout, card 0, port 0
[   20.390959] DDBridge I2C timeout, card 0, port 0
[   20.930854] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   21.460832] DDBridge I2C timeout, card 0, port 0
[   22.448123] DDBridge I2C timeout, card 0, port 0
[   22.864688] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[   22.966859] nvidia: module license 'NVIDIA' taints kernel.
[   22.966865] Disabling lock debugging due to kernel taint
[   23.144252] NVRM: No NVIDIA graphics adapter found!
[   23.538876] DDBridge I2C timeout, card 0, port 0
[   24.564334] DDBridge I2C timeout, card 0, port 0
[   25.574237] DDBridge I2C timeout, card 0, port 0
[   25.574245] Port 0 (TAB 1): NO MODULE
[   26.584111] DDBridge I2C timeout, card 0, port 1
[   27.091409] init: failsafe main process (718) killed by TERM signal
[   27.596130] DDBridge I2C timeout, card 0, port 1
[   28.604247] DDBridge I2C timeout, card 0, port 1
[   29.613700] DDBridge I2C timeout, card 0, port 1
[   30.674511] DDBridge I2C timeout, card 0, port 1
[   31.675691] DDBridge I2C timeout, card 0, port 1
[   32.206652] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   32.247620] NFSD: starting 90-second grace period (net ffffffff81cd2380)
[   32.677942] DDBridge I2C timeout, card 0, port 1
[   32.677950] Port 1 (TAB 2): NO MODULE
[   32.828761] init: avahi-cups-reload main process (1195) terminated with status 1
[   33.681959] DDBridge I2C timeout, card 0, port 2
[   34.680116] DDBridge I2C timeout, card 0, port 2
[   35.683893] DDBridge I2C timeout, card 0, port 2
[   36.680099] DDBridge I2C timeout, card 0, port 2
[   37.680115] DDBridge I2C timeout, card 0, port 2
[   38.680200] DDBridge I2C timeout, card 0, port 2
[   39.680116] DDBridge I2C timeout, card 0, port 2
[   39.680210] Port 2 (TAB 3): NO MODULE
[   39.709845] [drm] Capabilities:
[   39.709852] [drm]   Rect copy.
[   39.709853] [drm]   Cursor.
[   39.709854] [drm]   Cursor bypass.
[   39.709855] [drm]   Cursor bypass 2.
[   39.709856] [drm] VRAM at 0xfd000000 size is 16384 kiB
[   39.709858] [drm] MMIO at 0xfe000000 size is 64 kiB
[   39.709861] [drm] global init.
[   39.712580] [TTM] Zone  kernel: Available graphics memory: 766568 kiB
[   39.712583] [TTM] Initializing pool allocator
[   39.712587] [TTM] Initializing DMA pool allocator
[   39.712648] [drm:vmw_driver_load] *ERROR* Hardware has no pitchlock
[   39.712753] [TTM] Finalizing pool allocator
[   39.712756] [TTM] Finalizing DMA pool allocator
[   39.712796] [TTM] Zone  kernel: Used memory at exit: 0 kiB
[   39.714601] vmwgfx: probe of 0000:00:02.0 failed with error -38
[   39.845546] init: plymouth-stop pre-start process (1256) terminated with status 1
[   65.166487] init: wait-for-job-state (vdr-frontendvdr) main process (1664) killed by TERM signal

Display More

Diggo

Hi, sorry für die späte Antwort. Es ist Klausurphase, daher war ich nur sporadisch online. Nach meinem letzten Post hatte ich mal auf Kernel 3.11 aktualisiert (aus dem Ubuntu PPA) und es ging 3 Tage und ich hoffte stabil. Dann habe ich mich nicht mehr darum gekümmert. Den neueren Kernel wollte ich ausprobieren, weil ich noch nicht sicher bin, ob ich evtl. ein Problem bei der Virtualisierung habe. Als Wirt kommt ein ArchLinux zum Einsatz. Dort bin ich mit 3.13 unterwegs und VDR läuft in einer KVM DomU. Ich dachte evtl. kommt 3.11 schon etwas besser innerhalb der DomU.

Doch back2vdr:
Das Teil lief wohl eine Woche... heute hatte ich wieder das gleiche Problem. Wollte für meine Freundin was aufnehmen und bin ins Webinterface. Das EPG für die "großen" Sender war da. ARD HD etc. alles kein Problem, nur bei Sixx war nix. Dort wollte ich aber etwas timen, also habe ich den Timer von Hand angelegt. Beim Speichern dann wieder der gleiche Fehler. VDR weg. Auch die DomU ließ sich nicht mehr runterfahren und ich musste die VM per destroy zerlegen. Wie es scheint, zieht es auch dann die Karte in Mitleidenschaft. Die Karte wird erst wieder erfolgreich in der DomU erkannt, wenn ich die Dom0 komplett runtergefahren und neu gestartet habe (daher wollte ich mal den neuen Treiber testen).

Ich habe heute testweise jetzt mal das yavdr-unstable-main PPA eingebunden, weil GDA dort den neusten 0.9.12 Treiber eingebaut hat, wie ich vorhin gelesen habe. Aktuell ist dkms gerade am compilieren. Scheinbar läuft die Karte ja bei einigen stabil in virtuellen Umgebungen. Ich möchte halt ungern auf VMware oder Xen ausweichen.

lspci DomU:

Display Spoiler

Code

@VDRServ001:~$ lspci -vv
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
    	Subsystem: Red Hat, Inc Qemu virtual machine
    	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
    	Subsystem: Red Hat, Inc Qemu virtual machine
    	Physical Slot: 1
    	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] (prog-if 80 [Master])
    	Subsystem: Red Hat, Inc Qemu virtual machine
    	Physical Slot: 1
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
    	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
    	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
    	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
    	Region 4: I/O ports at c0e0 [size=16]
    	Kernel driver in use: ata_piix
    	Kernel modules: pata_acpi


00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01) (prog-if 00 [UHCI])
    	Subsystem: Red Hat, Inc Qemu virtual machine
    	Physical Slot: 1
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin D routed to IRQ 11
    	Region 4: I/O ports at c080 [size=32]
    	Kernel driver in use: uhci_hcd


00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
    	Subsystem: Red Hat, Inc Qemu virtual machine
    	Physical Slot: 1
    	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Interrupt: pin A routed to IRQ 9
    	Kernel driver in use: piix4_smbus
    	Kernel modules: i2c-piix4


00:02.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00 [VGA controller])
    	Subsystem: VMware SVGA II Adapter
    	Physical Slot: 2
    	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Region 0: I/O ports at c0f0 [size=16]
    	Region 1: Memory at fd000000 (32-bit, prefetchable) [size=16M]
    	Region 2: Memory at fe000000 (32-bit, prefetchable) [size=64K]
    	Expansion ROM at febc0000 [disabled] [size=64K]
    	Kernel modules: vmwgfx


00:03.0 Ethernet controller: Red Hat, Inc Virtio network device
    	Subsystem: Red Hat, Inc Device 0001
    	Physical Slot: 3
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 10
    	Region 0: I/O ports at c0a0 [size=32]
    	Region 1: Memory at febe0000 (32-bit, non-prefetchable) [size=4K]
    	Expansion ROM at feb80000 [disabled] [size=256K]
    	Capabilities: <access denied>
    	Kernel driver in use: virtio-pci


00:04.0 Multimedia controller: Digital Devices GmbH Octopus DVB Adapter
    	Subsystem: Digital Devices GmbH Cine CT V6.1 DVB adapter
    	Physical Slot: 4
    	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Interrupt: pin A routed to IRQ 11
    	Region 0: Memory at febd0000 (64-bit, non-prefetchable) [size=64K]
    	Capabilities: <access denied>
    	Kernel driver in use: ddbridge
    	Kernel modules: ddbridge


00:05.0 SCSI storage controller: Red Hat, Inc Virtio block device
    	Subsystem: Red Hat, Inc Device 0002
    	Physical Slot: 5
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 10
    	Region 0: I/O ports at c000 [size=64]
    	Region 1: Memory at febe1000 (32-bit, non-prefetchable) [size=4K]
    	Capabilities: <access denied>
    	Kernel driver in use: virtio-pci


00:06.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon
    	Subsystem: Red Hat, Inc Device 0005
    	Physical Slot: 6
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 11
    	Region 0: I/O ports at c0c0 [size=32]
    	Kernel driver in use: virtio-pci


00:07.0 SCSI storage controller: Red Hat, Inc Virtio block device
    	Subsystem: Red Hat, Inc Device 0002
    	Physical Slot: 7
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 10
    	Region 0: I/O ports at c040 [size=64]
    	Region 1: Memory at febe2000 (32-bit, non-prefetchable) [size=4K]
    	Capabilities: <access denied>
    	Kernel driver in use: virtio-pci

Display More

Diggo

Kleines Update: Nachdem ich hier gesucht habe, bin ich in einem Thread drauf gestoßen, dass GDA mal das Paket "media-build-experimental-dkms" erwähnt hat. Ich habe jetzt die Treiber von UFO entfernt und dieses Paket installiert und jetzt findet das System die Karte gar nicht mehr :-/

Dmesg:

Display Spoiler

Code

[	0.000000] Initializing cgroup subsys cpuset
[	0.000000] Initializing cgroup subsys cpu
[	0.000000] Linux version 3.2.0-59-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #90-Ubuntu SMP Tue Jan 7 22:43:51 UTC 2014 (Ubuntu 3.2.0-59.90-generic 3.2.54)
[	0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-59-generic root=UUID=9506fa9f-b32d-41c1-aa53-321bdbd99f86 ro vmalloc=256m splash irqpoll vga=792 noresume nohz=off acpi_enforce_resources=lax
[	0.000000] KERNEL supported cpus:
[	0.000000]   Intel GenuineIntel
[	0.000000]   AMD AuthenticAMD
[	0.000000]   Centaur CentaurHauls
[	0.000000] BIOS-provided physical RAM map:
[	0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[	0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[	0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[	0.000000]  BIOS-e820: 0000000000100000 - 000000005fffe000 (usable)
[	0.000000]  BIOS-e820: 000000005fffe000 - 0000000060000000 (reserved)
[	0.000000]  BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[	0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[	0.000000] NX (Execute Disable) protection: active
[	0.000000] SMBIOS 2.4 present.
[	0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011                                                                                                                                           	
[	0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)                                                                                                    	
[	0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)                                                                                                                   	
[	0.000000] No AGP bridge found                                                                                                                                                               	
[	0.000000] last_pfn = 0x5fffe max_arch_pfn = 0x400000000                                                                                                                                     	
[	0.000000] MTRR default type: write-back                                                                                                                                                     	
[	0.000000] MTRR fixed ranges enabled:                                                                                                                                                        	
[	0.000000]   00000-9FFFF write-back                                                                                                                                                          	
[	0.000000]   A0000-BFFFF uncachable                                                                                                                                                          	
[	0.000000]   C0000-FFFFF write-protect                                                                                                                                                       	
[	0.000000] MTRR variable ranges enabled:                                                                                                                                                     	
[	0.000000]   0 base 0080000000 mask FF80000000 uncachable                                                                                                                                    	
[	0.000000]   1 disabled                                                                                                                                                                      	
[	0.000000]   2 disabled                                                                                                                                                                      	
[	0.000000]   3 disabled                                                                                                                                                                      	
[	0.000000]   4 disabled                                                                                                                                                                      	
[	0.000000]   5 disabled                                                                                                                                                                      	
[	0.000000]   6 disabled                                                                                                                                                                      	
[	0.000000]   7 disabled
[	0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[	0.000000] found SMP MP-table at [ffff8800000f17a0] f17a0
[	0.000000] initial memory mapped : 0 - 20000000
[	0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[	0.000000] Using GB pages for direct mapping
[	0.000000] init_memory_mapping: 0000000000000000-000000005fffe000
[	0.000000]  0000000000 - 0040000000 page 1G
[	0.000000]  0040000000 - 005fe00000 page 2M
[	0.000000]  005fe00000 - 005fffe000 page 4k
[	0.000000] kernel direct mapping tables up to 5fffe000 @ 1fffd000-20000000
[	0.000000] RAMDISK: 363fc000 - 371f6000
[	0.000000] ACPI: RSDP 00000000000f1610 00014 (v00 BOCHS )
[	0.000000] ACPI: RSDT 000000005fffe3f0 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[	0.000000] ACPI: FACP 000000005fffff80 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[	0.000000] ACPI: DSDT 000000005fffe430 01137 (v01   BXPC   BXDSDT 00000001 INTL 20130823)
[	0.000000] ACPI: FACS 000000005fffff40 00040
[	0.000000] ACPI: SSDT 000000005ffff6a0 00899 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[	0.000000] ACPI: APIC 000000005ffff5b0 00080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[	0.000000] ACPI: HPET 000000005ffff570 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[	0.000000] ACPI: Local APIC address 0xfee00000
[	0.000000] No NUMA configuration found
[	0.000000] Faking a node at 0000000000000000-000000005fffe000
[	0.000000] Initmem setup node 0 0000000000000000-000000005fffe000
[	0.000000]   NODE_DATA [000000005fff9000 - 000000005fffdfff]
[	0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[	0.000000] kvm-clock: cpu 0, msr 0:1cfa741, boot clock
[	0.000000]  [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005de00000-ffff88005f5fffff] on node 0
[	0.000000] Zone PFN ranges:
[	0.000000]   DMA  	0x00000010 -> 0x00001000
[	0.000000]   DMA32	0x00001000 -> 0x00100000
[	0.000000]   Normal   empty
[	0.000000] Movable zone start PFN for each node
[	0.000000] early_node_map[2] active PFN ranges
[	0.000000] 	0: 0x00000010 -> 0x0000009f
[	0.000000] 	0: 0x00000100 -> 0x0005fffe
[	0.000000] On node 0 totalpages: 393101
[	0.000000]   DMA zone: 64 pages used for memmap
[	0.000000]   DMA zone: 5 pages reserved
[	0.000000]   DMA zone: 3914 pages, LIFO batch:0
[	0.000000]   DMA32 zone: 6080 pages used for memmap
[	0.000000]   DMA32 zone: 383038 pages, LIFO batch:31
[	0.000000] ACPI: PM-Timer IO Port: 0xb008
[	0.000000] ACPI: Local APIC address 0xfee00000
[	0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[	0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[	0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[	0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[	0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[	0.000000] ACPI: IRQ0 used by override.
[	0.000000] ACPI: IRQ2 used by override.
[	0.000000] ACPI: IRQ5 used by override.
[	0.000000] ACPI: IRQ9 used by override.
[	0.000000] ACPI: IRQ10 used by override.
[	0.000000] ACPI: IRQ11 used by override.
[	0.000000] Using ACPI (MADT) for SMP configuration information
[	0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[	0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[	0.000000] nr_irqs_gsi: 40
[	0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[	0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[	0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[	0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9effc000)
[	0.000000] Booting paravirtualized kernel on KVM
[	0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[	0.000000] PERCPU: Embedded 28 pages/cpu @ffff88005fc00000 s83136 r8192 d23360 u1048576
[	0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[	0.000000] pcpu-alloc: [0] 0 1 
[	0.000000] kvm-clock: cpu 0, msr 0:5fc13741, primary cpu clock
[	0.000000] KVM setup async PF for cpu 0
[	0.000000] kvm-stealtime: cpu 0, msr 5fc0ddc0
[	0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 386952
[	0.000000] Policy zone: DMA32
[	0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-59-generic root=UUID=9506fa9f-b32d-41c1-aa53-321bdbd99f86 ro vmalloc=256m splash irqpoll vga=792 noresume nohz=off acpi_enforce_resources=lax
[	0.000000] Misrouted IRQ fixup and polling support enabled
[	0.000000] This may significantly impact system performance
[	0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[	0.000000] Checking aperture...
[	0.000000] No AGP bridge found
[	0.000000] Calgary: detecting Calgary via BIOS EBDA area
[	0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[	0.000000] Memory: 1517460k/1572856k available (6592k kernel code, 452k absent, 54944k reserved, 6614k data, 924k init)
[	0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[	0.000000] Hierarchical RCU implementation.
[	0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[	0.000000] NR_IRQS:16640 nr_irqs:512 16
[	0.000000] Console: colour dummy device 80x25
[	0.000000] console [tty0] enabled
[	0.000000] allocated 12582912 bytes of page_cgroup
[	0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[	0.000000] hpet clockevent registered
[	0.000000] Detected 2809.372 MHz processor.
[	0.000000] Marking TSC unstable due to TSCs unsynchronized
[	0.008000] Calibrating delay loop (skipped) preset value.. 5618.74 BogoMIPS (lpj=11237488)
[	0.008000] pid_max: default: 32768 minimum: 301
[	0.008000] Security Framework initialized
[	0.008000] AppArmor: AppArmor initialized
[	0.008000] Yama: becoming mindful.
[	0.008000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[	0.008000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[	0.008000] Mount-cache hash table entries: 256
[	0.008000] Initializing cgroup subsys cpuacct
[	0.008000] Initializing cgroup subsys memory
[	0.008000] Initializing cgroup subsys devices
[	0.008000] Initializing cgroup subsys freezer
[	0.008000] Initializing cgroup subsys blkio
[	0.008000] Initializing cgroup subsys perf_event
[	0.008000] mce: CPU supports 10 MCE banks
[	0.011542] ACPI: Core revision 20110623
[	0.012362] ftrace: allocating 26602 entries in 105 pages
[	0.016350] Enabling x2apic
[	0.016362] Enabled x2apic
[	0.016521] Switched APIC routing to physical x2apic.
[	0.020887] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[	0.020891] CPU0: AMD Athlon(tm) II X4 630 Processor stepping 03
[	0.024001] Performance Events: Broken PMU hardware detected, using software events only.
[	0.024001] NMI watchdog disabled (cpu0): hardware events not enabled
[	0.024001] Booting Node   0, Processors  #1 Ok.
[	0.024001] smpboot cpu 1: start_ip = 9a000
[	0.031797] NMI watchdog disabled (cpu1): hardware events not enabled
[	0.031793] KVM setup async PF for cpu 1
[	0.031817] Brought up 2 CPUs
[	0.031819] Total of 2 processors activated (11237.48 BogoMIPS).
[	0.031813] kvm-stealtime: cpu 1, msr 5fd0ddc0
[	0.031813] kvm-clock: cpu 1, msr 0:5fd13741, secondary cpu clock
[	0.032299] devtmpfs: initialized
[	0.032961] EVM: security.selinux
[	0.032963] EVM: security.SMACK64
[	0.032966] EVM: security.capability
[	0.033078] print_constraints: dummy: 
[	0.033078] RTC time:  9:08:53, date: 03/04/14
[	0.033078] NET: Registered protocol family 16
[	0.033078] Trying to unpack rootfs image as initramfs...
[	0.040658] Extended Config Space enabled on 0 nodes
[	0.040779] ACPI: bus type pci registered
[	0.040876] PCI: Using configuration type 1 for base access
[	0.040879] PCI: Using configuration type 1 for extended access
[	0.041715] bio: create slab <bio-0> at 0
[	0.041807] ACPI: Added _OSI(Module Device)
[	0.041811] ACPI: Added _OSI(Processor Device)
[	0.041813] ACPI: Added _OSI(3.0 _SCP Extensions)
[	0.041816] ACPI: Added _OSI(Processor Aggregator Device)
[	0.042290] ACPI: EC: Look up EC in DSDT
[	0.043544] ACPI: Interpreter enabled
[	0.043556] ACPI: (supports S0 S3 S4 S5)
[	0.043570] ACPI: Using IOAPIC for interrupt routing
[	0.045920] ACPI: No dock devices found.
[	0.045926] HEST: Table not found.
[	0.045931] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[	0.045979] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[	0.046067] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[	0.046071] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[	0.046075] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[	0.046079] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff]
[	0.046119] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[	0.046360] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[	0.046699] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[	0.051123] pci 0000:00:01.1: reg 20: [io  0xc0e0-0xc0ef]
[	0.052994] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[	0.057341] pci 0000:00:01.2: reg 20: [io  0xc080-0xc09f]
[	0.059223] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[	0.059521] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[	0.059535] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[	0.060038] pci 0000:00:02.0: [15ad:0405] type 0 class 0x000300
[	0.066528] pci 0000:00:02.0: reg 10: [io  0xc0f0-0xc0ff]
[	0.072033] pci 0000:00:02.0: reg 14: [mem 0xfd000000-0xfdffffff pref]
[	0.080029] pci 0000:00:02.0: reg 18: [mem 0xfe000000-0xfe00ffff pref]
[	0.106502] pci 0000:00:02.0: reg 30: [mem 0xfebc0000-0xfebcffff pref]
[	0.106642] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
[	0.109805] pci 0000:00:03.0: reg 10: [io  0xc0a0-0xc0bf]
[	0.111517] pci 0000:00:03.0: reg 14: [mem 0xfebe0000-0xfebe0fff]
[	0.120014] pci 0000:00:03.0: reg 30: [mem 0xfeb80000-0xfebbffff pref]
[	0.120267] pci 0000:00:04.0: [dd01:0003] type 0 class 0x000480
[	0.123570] pci 0000:00:04.0: reg 10: [mem 0xfebd0000-0xfebdffff 64bit]
[	0.129581] pci 0000:00:05.0: [1af4:1001] type 0 class 0x000100
[	0.131404] pci 0000:00:05.0: reg 10: [io  0xc000-0xc03f]
[	0.132888] pci 0000:00:05.0: reg 14: [mem 0xfebe1000-0xfebe1fff]
[	0.141981] pci 0000:00:06.0: [1af4:1002] type 0 class 0x0000ff
[	0.142915] pci 0000:00:06.0: reg 10: [io  0xc0c0-0xc0df]
[	0.148575] pci 0000:00:07.0: [1af4:1001] type 0 class 0x000100
[	0.150334] pci 0000:00:07.0: reg 10: [io  0xc040-0xc07f]
[	0.152016] pci 0000:00:07.0: reg 14: [mem 0xfebe2000-0xfebe2fff]
[	0.161225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[	0.161518]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[	0.161532]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[	0.161536] ACPI _OSC control for PCIe not granted, disabling ASPM
[	0.164099] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[	0.164186] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[	0.164250] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[	0.164310] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[	0.168068] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[	0.164473] Freeing initrd memory: 14312k freed
[	0.176335] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[	0.176335] vgaarb: loaded
[	0.176335] vgaarb: bridge control possible 0000:00:02.0
[	0.176335] i2c-core: driver [aat2870] using legacy suspend method
[	0.176335] i2c-core: driver [aat2870] using legacy resume method
[	0.176385] SCSI subsystem initialized
[	0.176515] libata version 3.00 loaded.
[	0.176515] usbcore: registered new interface driver usbfs
[	0.176515] usbcore: registered new interface driver hub
[	0.176515] usbcore: registered new device driver usb
[	0.176515] PCI: Using ACPI for IRQ routing
[	0.176515] PCI: pci_cache_line_size set to 64 bytes
[	0.176515] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[	0.176515] reserve RAM buffer: 000000005fffe000 - 000000005fffffff 
[	0.176515] NetLabel: Initializing
[	0.176515] NetLabel:  domain hash size = 128
[	0.176515] NetLabel:  protocols = UNLABELED CIPSOv4
[	0.176515] NetLabel:  unlabeled traffic allowed by default
[	0.176521] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[	0.176521] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[	0.176521] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[	0.188076] Switching to clocksource kvm-clock
[	0.194087] AppArmor: AppArmor Filesystem Enabled
[	0.194123] pnp: PnP ACPI init
[	0.194140] ACPI: bus type pnp registered
[	0.194214] pnp 00:00: [bus 00-ff]
[	0.194224] pnp 00:00: [io  0x0cf8-0x0cff]
[	0.194226] pnp 00:00: [io  0x0000-0x0cf7 window]
[	0.194227] pnp 00:00: [io  0x0d00-0xffff window]
[	0.194229] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[	0.194231] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[	0.194277] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[	0.194287] pnp 00:01: [io  0x0070-0x0071]
[	0.194332] pnp 00:01: [irq 8]
[	0.194334] pnp 00:01: [io  0x0072-0x0077]
[	0.194356] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[	0.194368] pnp 00:02: [io  0x0060]
[	0.194370] pnp 00:02: [io  0x0064]
[	0.194384] pnp 00:02: [irq 1]
[	0.194406] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[	0.194428] pnp 00:03: [irq 12]
[	0.194448] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[	0.194466] pnp 00:04: [io  0x03f2-0x03f5]
[	0.194468] pnp 00:04: [io  0x03f7]
[	0.194481] pnp 00:04: [irq 6]
[	0.194482] pnp 00:04: [dma 2]
[	0.194509] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[	0.194553] pnp 00:05: [io  0x0378-0x037f]
[	0.194567] pnp 00:05: [irq 7]
[	0.194583] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[	0.194608] pnp 00:06: [io  0x03f8-0x03ff]
[	0.194621] pnp 00:06: [irq 4]
[	0.194642] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[	0.194677] pnp 00:07: [io  0x02f8-0x02ff]
[	0.194690] pnp 00:07: [irq 3]
[	0.194712] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[	0.194793] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[	0.194816] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[	0.194899] pnp: PnP ACPI: found 9 devices
[	0.194903] ACPI: ACPI bus type pnp unregistered
[	0.202765] PCI: max bus depth: 0 pci_try_num: 1
[	0.202774] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[	0.202776] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[	0.202778] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[	0.202780] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[	0.202829] NET: Registered protocol family 2
[	0.202927] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[	0.203561] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[	0.205572] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[	0.206037] TCP: Hash tables configured (established 262144 bind 65536)
[	0.206044] TCP reno registered
[	0.206064] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[	0.206085] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[	0.206209] NET: Registered protocol family 1
[	0.206228] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[	0.206266] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[	0.206286] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[	0.206683] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[	0.206716] pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[	0.207126] pci 0000:00:01.2: PCI INT D disabled
[	0.207156] pci 0000:00:02.0: Boot video device
[	0.207208] PCI: CLS 64 bytes, default 64
[	0.207984] audit: initializing netlink socket (disabled)
[	0.207999] type=2000 audit(1393924133.204:1): initialized
[	0.226969] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[	0.228895] VFS: Disk quotas dquot_6.5.2
[	0.228951] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[	0.229477] fuse init (API version 7.17)
[	0.229745] msgmni has been set to 2991
[	0.230362] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[	0.230478] io scheduler noop registered
[	0.230492] io scheduler deadline registered
[	0.230524] io scheduler cfq registered (default)
[	0.230608] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[	0.230627] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[	0.230754] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[	0.230761] ACPI: Power Button [PWRF]
[	0.231526] ERST: Table is not found!
[	0.231530] GHES: HEST is not enabled!
[	0.231695] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[	0.231720] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
[	0.232269] virtio-pci 0000:00:03.0: setting latency timer to 64
[	0.232507] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[	0.232515] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[	0.233214] virtio-pci 0000:00:05.0: setting latency timer to 64
[	0.234146] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[	0.234156] virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
[	0.235003] virtio-pci 0000:00:06.0: setting latency timer to 64
[	0.235137] virtio-pci 0000:00:07.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
[	0.236154] virtio-pci 0000:00:07.0: setting latency timer to 64
[	0.237484] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[	0.265353] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[	0.808365] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[	0.836504] Linux agpgart interface v0.103
[	0.839726] brd: module loaded
[	0.841580] loop: module loaded
[	0.841779] virtio-pci 0000:00:05.0: irq 40 for MSI/MSI-X
[	0.841797] virtio-pci 0000:00:05.0: irq 41 for MSI/MSI-X
[	0.901303]  vda: vda1 vda2 < vda5 >
[	0.902957] virtio-pci 0000:00:07.0: irq 42 for MSI/MSI-X
[	0.902975] virtio-pci 0000:00:07.0: irq 43 for MSI/MSI-X
[	0.903656]  vdb: vdb1
[	0.905229] ata_piix 0000:00:01.1: version 2.13
[	0.906429] ata_piix 0000:00:01.1: setting latency timer to 64
[	0.906894] scsi0 : ata_piix
[	0.907024] scsi1 : ata_piix
[	0.907057] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14
[	0.907061] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15
[	0.907390] Fixed MDIO Bus: probed
[	0.907405] tun: Universal TUN/TAP device driver, 1.6
[	0.907408] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[	0.907681] virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
[	0.907697] virtio-pci 0000:00:03.0: irq 45 for MSI/MSI-X
[	0.907714] virtio-pci 0000:00:03.0: irq 46 for MSI/MSI-X
[	0.977485] PPP generic driver version 2.4.2
[	0.977598] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[	0.977619] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[	0.977629] uhci_hcd: USB Universal Host Controller Interface driver
[	0.977678] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[	0.979063] uhci_hcd 0000:00:01.2: setting latency timer to 64
[	0.979073] uhci_hcd 0000:00:01.2: UHCI Host Controller
[	0.979164] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[	0.979267] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
[	0.979434] hub 1-0:1.0: USB hub found
[	0.979442] hub 1-0:1.0: 2 ports detected
[	0.979553] usbcore: registered new interface driver libusual
[	0.979596] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[	0.980280] serio: i8042 KBD port at 0x60,0x64 irq 1
[	0.980288] serio: i8042 AUX port at 0x60,0x64 irq 12
[	0.980368] mousedev: PS/2 mouse device common for all mice
[	0.980473] rtc_cmos 00:01: RTC can wake from S4
[	0.980635] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[	0.980841] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[	0.980918] device-mapper: uevent: version 1.0.3
[	0.980976] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[	0.980985] cpuidle: using governor ladder
[	0.980988] cpuidle: using governor menu
[	0.980990] EFI Variables Facility v0.08 2004-May-17
[	0.981179] TCP cubic registered
[	0.981257] NET: Registered protocol family 10
[	0.981768] NET: Registered protocol family 17
[	0.981773] Registering the dns_resolver key type
[	0.981891] registered taskstats version 1
[	0.982312] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[	0.997110]   Magic number: 6:298:120
[	0.997120] misc device-mapper: hash matches
[	0.997278] rtc_cmos 00:01: setting system clock to 2014-03-04 09:08:55 UTC (1393924135)
[	0.997310] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[	0.997313] EDD information not available.
[	1.062014] Freeing unused kernel memory: 924k freed
[	1.062387] Write protecting the kernel read-only data: 12288k
[	1.066990] Freeing unused kernel memory: 1580k freed
[	1.071106] Freeing unused kernel memory: 1188k freed
[	1.133836] udevd[88]: starting version 175
[	1.155795] vesafb: mode is 1024x768x24, linelength=3072, pages=0
[	1.155802] vesafb: scrolling: redraw
[	1.155806] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[	1.156101] vesafb: framebuffer at 0xfd000000, mapped to 0xffffc90000900000, using 2304k, total 2304k
[	1.164219] Console: switching to colour frame buffer device 128x48
[	1.169314] fb0: VESA VGA frame buffer device
[	1.380570] FDC 0 is a S82078B
[	1.541467] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
[   10.353732] Adding 1046524k swap on /dev/vda5.  Priority:-1 extents:1 across:1046524k 
[   10.396231] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.461018] udevd[330]: starting version 175
[   10.861908] lp: driver loaded but no devices found
[   11.056543] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[   11.257718] WARNING: You are using an experimental version of the media stack.
[   11.257720]  As the driver is backported to an older kernel, it doesn't offer
[   11.257721]  enough quality for its usage in production.
[   11.257722]  Use it with care.
[   11.257723] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   11.257723]  dfb9f94e8e5e7f73c8e2bcb7d4fb1de57e7c333d [media] stk1160: Build as a module if SND is m and audio support is selected
[   11.257725]  9f1595245574a2dc1fb375df665e4d9fe336a9c4 [media] cx23885-video: fix two warnings
[   11.257725]  5bc08e1921e46101457d3be09835697490177fdd [media] cx23885[v4]: Fix interrupt storm when enabling IR receiver
[   11.257727]  experimental: c09515e968f1704b061229bad9c632f6a4499eba media_build: Fix PATCHLEVEL for kernel >= 3.10
[   11.257728]  v4l-dvb-saa716x: 0dab24906ff057b72537b01605bdf06c4dbb1c62 saa716x: i2c_del_adapter() fix
[   11.346224] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[   11.431172] Digital Devices PCIE bridge driver 0.9.9, Copyright (C) 2010-13 Digital Devices GmbH
[   11.436150] ddbridge 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[   11.436248] DDBridge driver detected: Digital Devices DVBCT V6.1 DVB adapter
[   11.436291] HW 0001000d REGMAP 00010004
[   11.445751] Port 0 (TAB 1): NO MODULE
[   11.447057] Port 1 (TAB 2): NO MODULE
[   11.448526] Port 2 (TAB 3): NO MODULE
[   11.667899] parport_pc 00:05: reported by Plug and Play ACPI
[   11.704662] [drm] Initialized drm 1.1.0 20060810
[   11.866863] [drm] Capabilities:
[   11.866866] [drm]   Rect copy.
[   11.866868] [drm]   Cursor.
[   11.866869] [drm]   Cursor bypass.
[   11.866870] [drm]   Cursor bypass 2.
[   11.866872] [drm] VRAM at 0xfd000000 size is 16384 kiB
[   11.866873] [drm] MMIO at 0xfe000000 size is 64 kiB
[   11.866875] [drm] global init.
[   11.871247] [TTM] Zone  kernel: Available graphics memory: 767732 kiB.
[   11.871250] [TTM] Initializing pool allocator.
[   11.871450] [drm:vmw_driver_load] *ERROR* Hardware has no pitchlock
[   11.874222] [TTM] Finalizing pool allocator.
[   11.874261] [TTM] Zone  kernel: Used memory at exit: 0 kiB.
[   11.876736] vmwgfx: probe of 0000:00:02.0 failed with error -38
[   11.902782] ppdev: user-space parallel port driver
[   11.945732] EXT4-fs (vdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   12.389877] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[   12.523925] RPC: Registered named UNIX socket transport module.
[   12.523929] RPC: Registered udp transport module.
[   12.523930] RPC: Registered tcp transport module.
[   12.523932] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.598537] FS-Cache: Loaded
[   12.642498] FS-Cache: Netfs 'nfs' registered for caching
[   12.680530] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   13.585512] nvidia: module license 'NVIDIA' taints kernel.
[   13.585516] Disabling lock debugging due to kernel taint
[   13.624399] init: failsafe main process (866) killed by TERM signal
[   13.667778] NVRM: No NVIDIA graphics adapter found!
[   14.261668] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[   15.679919] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   15.680474] NFSD: starting 90-second grace period
[   16.224328] init: plymouth-stop pre-start process (1425) terminated with status 1
[   17.721629] init: wait-for-job-state (vdr-frontendvdr) main process (1268) killed by TERM signal
[   22.000074] eth0: no IPv6 routers present

Display More

Keine Ahnung was ich jetzt noch groß machen soll. Ich werd einfach weiter rumprobieren

Diggo

So, nach einem Reboot kann ich nun keine Channels mehr eintunen und dmesg zeigt folgendes Bild:

Display Spoiler

Code

[	0.000000] Initializing cgroup subsys cpuset
[	0.000000] Initializing cgroup subsys cpu
[	0.000000] Linux version 3.2.0-59-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #90-Ubuntu SMP Tue Jan 7 22:43:51 UTC 2014 (Ubuntu 3.2.0-59.90-generic 3.2.54)
[	0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-59-generic root=UUID=9506fa9f-b32d-41c1-aa53-321bdbd99f86 ro vmalloc=256m splash irqpoll vga=792 noresume nohz=off acpi_enforce_resources=lax
[	0.000000] KERNEL supported cpus:
[	0.000000]   Intel GenuineIntel
[	0.000000]   AMD AuthenticAMD
[	0.000000]   Centaur CentaurHauls
[	0.000000] BIOS-provided physical RAM map:
[	0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[	0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[	0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[	0.000000]  BIOS-e820: 0000000000100000 - 000000005fffe000 (usable)
[	0.000000]  BIOS-e820: 000000005fffe000 - 0000000060000000 (reserved)
[	0.000000]  BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[	0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[	0.000000] NX (Execute Disable) protection: active
[	0.000000] SMBIOS 2.4 present.
[	0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
[	0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[	0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[	0.000000] No AGP bridge found
[	0.000000] last_pfn = 0x5fffe max_arch_pfn = 0x400000000
[	0.000000] MTRR default type: write-back
[	0.000000] MTRR fixed ranges enabled:
[	0.000000]   00000-9FFFF write-back
[	0.000000]   A0000-BFFFF uncachable
[	0.000000]   C0000-FFFFF write-protect
[	0.000000] MTRR variable ranges enabled:
[	0.000000]   0 base 0080000000 mask FF80000000 uncachable
[	0.000000]   1 disabled
[	0.000000]   2 disabled
[	0.000000]   3 disabled
[	0.000000]   4 disabled
[	0.000000]   5 disabled
[	0.000000]   6 disabled
[	0.000000]   7 disabled
[	0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[	0.000000] found SMP MP-table at [ffff8800000f17a0] f17a0
[	0.000000] initial memory mapped : 0 - 20000000
[	0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[	0.000000] Using GB pages for direct mapping
[	0.000000] init_memory_mapping: 0000000000000000-000000005fffe000
[	0.000000]  0000000000 - 0040000000 page 1G
[	0.000000]  0040000000 - 005fe00000 page 2M
[	0.000000]  005fe00000 - 005fffe000 page 4k
[	0.000000] kernel direct mapping tables up to 5fffe000 @ 1fffd000-20000000
[	0.000000] RAMDISK: 363fc000 - 371f6000
[	0.000000] ACPI: RSDP 00000000000f1610 00014 (v00 BOCHS )
[	0.000000] ACPI: RSDT 000000005fffe3f0 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[	0.000000] ACPI: FACP 000000005fffff80 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[	0.000000] ACPI: DSDT 000000005fffe430 01137 (v01   BXPC   BXDSDT 00000001 INTL 20130823)
[	0.000000] ACPI: FACS 000000005fffff40 00040
[	0.000000] ACPI: SSDT 000000005ffff6a0 00899 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[	0.000000] ACPI: APIC 000000005ffff5b0 00080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[	0.000000] ACPI: HPET 000000005ffff570 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[	0.000000] ACPI: Local APIC address 0xfee00000
[	0.000000] No NUMA configuration found
[	0.000000] Faking a node at 0000000000000000-000000005fffe000
[	0.000000] Initmem setup node 0 0000000000000000-000000005fffe000
[	0.000000]   NODE_DATA [000000005fff9000 - 000000005fffdfff]
[	0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[	0.000000] kvm-clock: cpu 0, msr 0:1cfa741, boot clock
[	0.000000]  [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005de00000-ffff88005f5fffff] on node 0
[	0.000000] Zone PFN ranges:
[	0.000000]   DMA  	0x00000010 -> 0x00001000
[	0.000000]   DMA32	0x00001000 -> 0x00100000
[	0.000000]   Normal   empty
[	0.000000] Movable zone start PFN for each node
[	0.000000] early_node_map[2] active PFN ranges
[	0.000000] 	0: 0x00000010 -> 0x0000009f
[	0.000000] 	0: 0x00000100 -> 0x0005fffe
[	0.000000] On node 0 totalpages: 393101
[	0.000000]   DMA zone: 64 pages used for memmap
[	0.000000]   DMA zone: 5 pages reserved
[	0.000000]   DMA zone: 3914 pages, LIFO batch:0
[	0.000000]   DMA32 zone: 6080 pages used for memmap
[	0.000000]   DMA32 zone: 383038 pages, LIFO batch:31
[	0.000000] ACPI: PM-Timer IO Port: 0xb008
[	0.000000] ACPI: Local APIC address 0xfee00000
[	0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[	0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[	0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[	0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[	0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[	0.000000] ACPI: IRQ0 used by override.
[	0.000000] ACPI: IRQ2 used by override.
[	0.000000] ACPI: IRQ5 used by override.
[	0.000000] ACPI: IRQ9 used by override.
[	0.000000] ACPI: IRQ10 used by override.
[	0.000000] ACPI: IRQ11 used by override.
[	0.000000] Using ACPI (MADT) for SMP configuration information
[	0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[	0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[	0.000000] nr_irqs_gsi: 40
[	0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[	0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[	0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[	0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9effc000)
[	0.000000] Booting paravirtualized kernel on KVM
[	0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[	0.000000] PERCPU: Embedded 28 pages/cpu @ffff88005fc00000 s83136 r8192 d23360 u1048576
[	0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[	0.000000] pcpu-alloc: [0] 0 1 
[	0.000000] kvm-clock: cpu 0, msr 0:5fc13741, primary cpu clock
[	0.000000] KVM setup async PF for cpu 0
[	0.000000] kvm-stealtime: cpu 0, msr 5fc0ddc0
[	0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 386952
[	0.000000] Policy zone: DMA32
[	0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-59-generic root=UUID=9506fa9f-b32d-41c1-aa53-321bdbd99f86 ro vmalloc=256m splash irqpoll vga=792 noresume nohz=off acpi_enforce_resources=lax
[	0.000000] Misrouted IRQ fixup and polling support enabled
[	0.000000] This may significantly impact system performance
[	0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[	0.000000] Checking aperture...
[	0.000000] No AGP bridge found
[	0.000000] Calgary: detecting Calgary via BIOS EBDA area
[	0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[	0.000000] Memory: 1517460k/1572856k available (6592k kernel code, 452k absent, 54944k reserved, 6614k data, 924k init)
[	0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[	0.000000] Hierarchical RCU implementation.
[	0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[	0.000000] NR_IRQS:16640 nr_irqs:512 16
[	0.000000] Console: colour dummy device 80x25
[	0.000000] console [tty0] enabled
[	0.000000] allocated 12582912 bytes of page_cgroup
[	0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[	0.000000] hpet clockevent registered
[	0.000000] Detected 2809.372 MHz processor.
[	0.000000] Marking TSC unstable due to TSCs unsynchronized
[	0.008000] Calibrating delay loop (skipped) preset value.. 5618.74 BogoMIPS (lpj=11237488)
[	0.008000] pid_max: default: 32768 minimum: 301
[	0.008000] Security Framework initialized
[	0.008000] AppArmor: AppArmor initialized
[	0.008000] Yama: becoming mindful.
[	0.008000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[	0.008000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[	0.008000] Mount-cache hash table entries: 256
[	0.008000] Initializing cgroup subsys cpuacct
[	0.008000] Initializing cgroup subsys memory
[	0.008000] Initializing cgroup subsys devices
[	0.008000] Initializing cgroup subsys freezer
[	0.008000] Initializing cgroup subsys blkio
[	0.008000] Initializing cgroup subsys perf_event
[	0.008000] mce: CPU supports 10 MCE banks
[	0.011566] ACPI: Core revision 20110623
[	0.012399] ftrace: allocating 26602 entries in 105 pages
[	0.016320] Enabling x2apic
[	0.016332] Enabled x2apic
[	0.016491] Switched APIC routing to physical x2apic.
[	0.020940] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[	0.020944] CPU0: AMD Athlon(tm) II X4 630 Processor stepping 03
[	0.024001] Performance Events: Broken PMU hardware detected, using software events only.
[	0.024001] NMI watchdog disabled (cpu0): hardware events not enabled
[	0.024001] Booting Node   0, Processors  #1 Ok.
[	0.024001] smpboot cpu 1: start_ip = 9a000
[	0.031791] NMI watchdog disabled (cpu1): hardware events not enabled
[	0.031808] KVM setup async PF for cpu 1
[	0.031816] Brought up 2 CPUs
[	0.031819] Total of 2 processors activated (11237.48 BogoMIPS).
[	0.031808] kvm-stealtime: cpu 1, msr 5fd0ddc0
[	0.031808] kvm-clock: cpu 1, msr 0:5fd13741, secondary cpu clock
[	0.032272] devtmpfs: initialized
[	0.032960] EVM: security.selinux
[	0.032963] EVM: security.SMACK64
[	0.032965] EVM: security.capability
[	0.033078] print_constraints: dummy: 
[	0.033078] RTC time: 23:38:27, date: 03/03/14
[	0.033078] NET: Registered protocol family 16
[	0.033078] Trying to unpack rootfs image as initramfs...
[	0.040528] Extended Config Space enabled on 0 nodes
[	0.040653] ACPI: bus type pci registered
[	0.040753] PCI: Using configuration type 1 for base access
[	0.040756] PCI: Using configuration type 1 for extended access
[	0.041597] bio: create slab <bio-0> at 0
[	0.041691] ACPI: Added _OSI(Module Device)
[	0.041694] ACPI: Added _OSI(Processor Device)
[	0.041697] ACPI: Added _OSI(3.0 _SCP Extensions)
[	0.041700] ACPI: Added _OSI(Processor Aggregator Device)
[	0.042162] ACPI: EC: Look up EC in DSDT
[	0.043418] ACPI: Interpreter enabled
[	0.043429] ACPI: (supports S0 S3 S4 S5)
[	0.043443] ACPI: Using IOAPIC for interrupt routing
[	0.045770] ACPI: No dock devices found.
[	0.045777] HEST: Table not found.
[	0.045782] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[	0.045830] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[	0.045917] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[	0.045921] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[	0.045924] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[	0.045928] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff]
[	0.045967] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[	0.046210] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[	0.046546] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[	0.051127] pci 0000:00:01.1: reg 20: [io  0xc0e0-0xc0ef]
[	0.052995] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[	0.057366] pci 0000:00:01.2: reg 20: [io  0xc080-0xc09f]
[	0.059222] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[	0.059516] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[	0.059531] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[	0.059648] pci 0000:00:02.0: [15ad:0405] type 0 class 0x000300
[	0.062519] pci 0000:00:02.0: reg 10: [io  0xc0f0-0xc0ff]
[	0.068034] pci 0000:00:02.0: reg 14: [mem 0xfd000000-0xfdffffff pref]
[	0.076032] pci 0000:00:02.0: reg 18: [mem 0xfe000000-0xfe00ffff pref]
[	0.102530] pci 0000:00:02.0: reg 30: [mem 0xfebc0000-0xfebcffff pref]
[	0.102670] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
[	0.104885] pci 0000:00:03.0: reg 10: [io  0xc0a0-0xc0bf]
[	0.106618] pci 0000:00:03.0: reg 14: [mem 0xfebe0000-0xfebe0fff]
[	0.115414] pci 0000:00:03.0: reg 30: [mem 0xfeb80000-0xfebbffff pref]
[	0.116182] pci 0000:00:04.0: [dd01:0003] type 0 class 0x000480
[	0.119489] pci 0000:00:04.0: reg 10: [mem 0xfebd0000-0xfebdffff 64bit]
[	0.125518] pci 0000:00:05.0: [1af4:1001] type 0 class 0x000100
[	0.127326] pci 0000:00:05.0: reg 10: [io  0xc000-0xc03f]
[	0.128882] pci 0000:00:05.0: reg 14: [mem 0xfebe1000-0xfebe1fff]
[	0.137972] pci 0000:00:06.0: [1af4:1002] type 0 class 0x0000ff
[	0.138899] pci 0000:00:06.0: reg 10: [io  0xc0c0-0xc0df]
[	0.144121] pci 0000:00:07.0: [1af4:1001] type 0 class 0x000100
[	0.145884] pci 0000:00:07.0: reg 10: [io  0xc040-0xc07f]
[	0.147625] pci 0000:00:07.0: reg 14: [mem 0xfebe2000-0xfebe2fff]
[	0.156358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[	0.156661]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[	0.156675]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[	0.156679] ACPI _OSC control for PCIe not granted, disabling ASPM
[	0.158928] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[	0.159011] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[	0.159075] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[	0.159135] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[	0.160061] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[	0.160385] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[	0.160385] vgaarb: loaded
[	0.160385] vgaarb: bridge control possible 0000:00:02.0
[	0.160385] i2c-core: driver [aat2870] using legacy suspend method
[	0.160385] i2c-core: driver [aat2870] using legacy resume method
[	0.160385] SCSI subsystem initialized
[	0.172083] libata version 3.00 loaded.
[	0.172151] usbcore: registered new interface driver usbfs
[	0.172168] usbcore: registered new interface driver hub
[	0.172220] usbcore: registered new device driver usb
[	0.172327] PCI: Using ACPI for IRQ routing
[	0.172337] PCI: pci_cache_line_size set to 64 bytes
[	0.172539] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[	0.172544] reserve RAM buffer: 000000005fffe000 - 000000005fffffff 
[	0.172654] NetLabel: Initializing
[	0.172657] NetLabel:  domain hash size = 128
[	0.172659] NetLabel:  protocols = UNLABELED CIPSOv4
[	0.172672] NetLabel:  unlabeled traffic allowed by default
[	0.172755] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[	0.172771] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[	0.172776] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[	0.180228] Switching to clocksource kvm-clock
[	0.186186] AppArmor: AppArmor Filesystem Enabled
[	0.186254] pnp: PnP ACPI init
[	0.186278] ACPI: bus type pnp registered
[	0.186386] pnp 00:00: [bus 00-ff]
[	0.186392] pnp 00:00: [io  0x0cf8-0x0cff]
[	0.186394] pnp 00:00: [io  0x0000-0x0cf7 window]
[	0.186396] pnp 00:00: [io  0x0d00-0xffff window]
[	0.186398] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[	0.186400] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[	0.186473] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[	0.186487] pnp 00:01: [io  0x0070-0x0071]
[	0.186572] pnp 00:01: [irq 8]
[	0.186574] pnp 00:01: [io  0x0072-0x0077]
[	0.186597] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[	0.186609] pnp 00:02: [io  0x0060]
[	0.186611] pnp 00:02: [io  0x0064]
[	0.186630] pnp 00:02: [irq 1]
[	0.186649] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[	0.186675] pnp 00:03: [irq 12]
[	0.186696] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[	0.186713] pnp 00:04: [io  0x03f2-0x03f5]
[	0.186715] pnp 00:04: [io  0x03f7]
[	0.186732] pnp 00:04: [irq 6]
[	0.186734] pnp 00:04: [dma 2]
[	0.186751] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[	0.186799] pnp 00:05: [io  0x0378-0x037f]
[	0.186818] pnp 00:05: [irq 7]
[	0.186835] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[	0.186859] pnp 00:06: [io  0x03f8-0x03ff]
[	0.186876] pnp 00:06: [irq 4]
[	0.186900] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[	0.186927] pnp 00:07: [io  0x02f8-0x02ff]
[	0.186944] pnp 00:07: [irq 3]
[	0.186971] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[	0.187057] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[	0.187080] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[	0.187196] pnp: PnP ACPI: found 9 devices
[	0.187200] ACPI: ACPI bus type pnp unregistered
[	0.193244] PCI: max bus depth: 0 pci_try_num: 1
[	0.193257] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[	0.193259] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[	0.193261] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[	0.193262] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[	0.193312] NET: Registered protocol family 2
[	0.193418] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[	0.194156] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[	0.196242] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[	0.196738] TCP: Hash tables configured (established 262144 bind 65536)
[	0.196745] TCP reno registered
[	0.196765] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[	0.196787] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[	0.196920] NET: Registered protocol family 1
[	0.196933] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[	0.196972] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[	0.196993] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[	0.197347] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[	0.197378] pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[	0.197803] pci 0000:00:01.2: PCI INT D disabled
[	0.197833] pci 0000:00:02.0: Boot video device
[	0.197882] PCI: CLS 64 bytes, default 64
[	0.198272] audit: initializing netlink socket (disabled)
[	0.198284] type=2000 audit(1393889908.196:1): initialized
[	0.217114] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[	0.218704] VFS: Disk quotas dquot_6.5.2
[	0.218760] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[	0.219188] fuse init (API version 7.17)
[	0.219261] msgmni has been set to 2963
[	0.219510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[	0.219549] io scheduler noop registered
[	0.219557] io scheduler deadline registered
[	0.219583] io scheduler cfq registered (default)
[	0.219665] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[	0.219683] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[	0.219805] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[	0.219812] ACPI: Power Button [PWRF]
[	0.220625] ERST: Table is not found!
[	0.220629] GHES: HEST is not enabled!
[	0.220799] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[	0.220832] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
[	0.221345] virtio-pci 0000:00:03.0: setting latency timer to 64
[	0.221579] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[	0.221586] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[	0.222307] virtio-pci 0000:00:05.0: setting latency timer to 64
[	0.223222] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[	0.223232] virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
[	0.224137] virtio-pci 0000:00:06.0: setting latency timer to 64
[	0.224273] virtio-pci 0000:00:07.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
[	0.225263] virtio-pci 0000:00:07.0: setting latency timer to 64
[	0.226417] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[	0.248931] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[	0.259633] Freeing initrd memory: 14312k freed
[	0.812155] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[	0.848283] Linux agpgart interface v0.103
[	0.849439] brd: module loaded
[	0.850054] loop: module loaded
[	0.850263] virtio-pci 0000:00:05.0: irq 40 for MSI/MSI-X
[	0.850280] virtio-pci 0000:00:05.0: irq 41 for MSI/MSI-X
[	0.905921]  vda: vda1 vda2 < vda5 >
[	0.907459] virtio-pci 0000:00:07.0: irq 42 for MSI/MSI-X
[	0.907478] virtio-pci 0000:00:07.0: irq 43 for MSI/MSI-X
[	0.908123]  vdb: vdb1
[	0.909554] ata_piix 0000:00:01.1: version 2.13
[	0.910811] ata_piix 0000:00:01.1: setting latency timer to 64
[	0.911318] scsi0 : ata_piix
[	0.911474] scsi1 : ata_piix
[	0.911514] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14
[	0.911518] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15
[	0.911854] Fixed MDIO Bus: probed
[	0.911870] tun: Universal TUN/TAP device driver, 1.6
[	0.911872] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[	0.912148] virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
[	0.912165] virtio-pci 0000:00:03.0: irq 45 for MSI/MSI-X
[	0.912188] virtio-pci 0000:00:03.0: irq 46 for MSI/MSI-X
[	1.004099] PPP generic driver version 2.4.2
[	1.004421] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[	1.004442] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[	1.004453] uhci_hcd: USB Universal Host Controller Interface driver
[	1.004510] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[	1.006192] uhci_hcd 0000:00:01.2: setting latency timer to 64
[	1.006202] uhci_hcd 0000:00:01.2: UHCI Host Controller
[	1.006391] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[	1.006498] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
[	1.006869] hub 1-0:1.0: USB hub found
[	1.006877] hub 1-0:1.0: 2 ports detected
[	1.006999] usbcore: registered new interface driver libusual
[	1.007040] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[	1.007893] serio: i8042 KBD port at 0x60,0x64 irq 1
[	1.007902] serio: i8042 AUX port at 0x60,0x64 irq 12
[	1.008048] mousedev: PS/2 mouse device common for all mice
[	1.008279] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[	1.008492] rtc_cmos 00:01: RTC can wake from S4
[	1.008657] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[	1.008822] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[	1.008897] device-mapper: uevent: version 1.0.3
[	1.008958] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[	1.008967] cpuidle: using governor ladder
[	1.008970] cpuidle: using governor menu
[	1.008973] EFI Variables Facility v0.08 2004-May-17
[	1.009160] TCP cubic registered
[	1.009236] NET: Registered protocol family 10
[	1.009749] NET: Registered protocol family 17
[	1.009754] Registering the dns_resolver key type
[	1.009876] registered taskstats version 1
[	1.026073]   Magic number: 6:228:655
[	1.026245] rtc_cmos 00:01: setting system clock to 2014-03-03 23:38:28 UTC (1393889908)
[	1.026277] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[	1.026280] EDD information not available.
[	1.065970] Freeing unused kernel memory: 924k freed
[	1.066341] Write protecting the kernel read-only data: 12288k
[	1.070994] Freeing unused kernel memory: 1580k freed
[	1.075122] Freeing unused kernel memory: 1188k freed
[	1.133042] udevd[88]: starting version 175
[	1.172110] vesafb: mode is 1024x768x24, linelength=3072, pages=0
[	1.172119] vesafb: scrolling: redraw
[	1.172123] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[	1.175666] vesafb: framebuffer at 0xfd000000, mapped to 0xffffc90000900000, using 2304k, total 2304k
[	1.176232] Console: switching to colour frame buffer device 128x48
[	1.181446] fb0: VESA VGA frame buffer device
[	1.372704] FDC 0 is a S82078B
[	1.623691] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
[   10.256381] Adding 1046524k swap on /dev/vda5.  Priority:-1 extents:1 across:1046524k 
[   10.354662] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.476746] udevd[336]: starting version 175
[   10.592136] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[   10.689437] lp: driver loaded but no devices found
[   11.073805] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[   11.144402] EXT4-fs (vdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   11.262299] parport_pc 00:05: reported by Plug and Play ACPI
[   11.329462] [drm] Initialized drm 1.1.0 20060810
[   11.432602] WARNING: You are using an experimental version of the media stack.
[   11.432605]  As the driver is backported to an older kernel, it doesn't offer
[   11.432606]  enough quality for its usage in production.
[   11.432606]  Use it with care.
[   11.432607] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   11.432608]  dfb9f94e8e5e7f73c8e2bcb7d4fb1de57e7c333d [media] stk1160: Build as a module if SND is m and audio support is selected
[   11.432609]  9f1595245574a2dc1fb375df665e4d9fe336a9c4 [media] cx23885-video: fix two warnings
[   11.432610]  5bc08e1921e46101457d3be09835697490177fdd [media] cx23885[v4]: Fix interrupt storm when enabling IR receiver
[   11.432611]  experimental: 09f9a9a2fc24022289536b89b1ea2bde537363d5 experimental: Add missing file experimental/oe/get_dvb_firmware
[   11.432612]  v4l-dvb-saa716x: 0dab24906ff057b72537b01605bdf06c4dbb1c62 saa716x: i2c_del_adapter() fix
[   11.504633] Digital Devices PCIE bridge driver 0.9.9, Copyright (C) 2010-13 Digital Devices GmbH
[   11.505774] ddbridge 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[   11.505861] DDBridge driver detected: Digital Devices DVBCT V6.1 DVB adapter
[   11.506003] HW 0001000d REGMAP 00010004
[   11.646174] Port 0 (TAB 1): DUAL DVB-C/T
[   11.647953] Port 1 (TAB 2): NO MODULE
[   11.649359] Port 2 (TAB 3): NO MODULE
[   11.650383] DVB: registering new adapter (DDBridge)
[   11.650387] DVB: registering new adapter (DDBridge)
[   12.017434] ppdev: user-space parallel port driver
[   12.269170] stv0367 found
[   12.278976] stv0367: i2c_write error
[   12.279261] stv0367: i2c_write error
[   12.279317] stv0367: i2c_write error
[   12.279355] stv0367: i2c_write error
[   12.279392] stv0367: i2c_write error
[   12.279431] stv0367: i2c_write error
[   12.279476] stv0367: i2c_write error
[   12.279532] stv0367: i2c_write error
[   12.279603] stv0367: i2c_write error
[   12.279672] stv0367: i2c_write error
[   12.279715] stv0367: i2c_write error
[   12.279773] stv0367: i2c_write error
[   12.279812] stv0367: i2c_write error
[   12.279848] stv0367: i2c_write error
[   12.279884] stv0367: i2c_write error
[   12.279924] stv0367: i2c_write error
[   12.279960] stv0367: i2c_write error
[   12.279999] stv0367: i2c_write error
[   12.280075] stv0367: i2c_write error
[   12.280136] stv0367: i2c_write error
[   12.280173] stv0367: i2c_write error
[   12.280212] stv0367: i2c_write error
[   12.280249] stv0367: i2c_write error
[   12.280305] stv0367: i2c_write error
[   12.280363] stv0367: i2c_write error
[   12.280399] stv0367: i2c_write error
[   12.280439] stv0367: i2c_write error
[   12.283205] stv0367: i2c_write error
[   12.283332] stv0367: i2c_write error
[   12.283666] stv0367: i2c_write error
[   12.283740] stv0367: i2c_write error
[   12.283793] stv0367: i2c_write error
[   12.283830] stv0367: i2c_write error
[   12.283867] stv0367: i2c_write error
[   12.405600] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[   12.438968] RPC: Registered named UNIX socket transport module.
[   12.438973] RPC: Registered udp transport module.
[   12.438974] RPC: Registered tcp transport module.
[   12.438975] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.569977] FS-Cache: Loaded
[   12.660539] stv0367: i2c_write error
[   12.660607] tda18212dd: i2c_read error
[   12.660647] tda18212dd: i2c_read error
[   12.660684] stv0367: i2c_write error
[   12.660687] No TDA18212 found!
[   12.660690] port_attach on port 0 failed
[   12.661292] fail3
[   12.661298] fail2
[   12.661377] fail1
[   12.661382] fail0
[   12.661382] fail
[   12.661433] ddbridge 0000:00:04.0: PCI INT A disabled
[   12.661439] ddbridge: probe of 0000:00:04.0 failed with error -1
[   12.667700] [drm] Capabilities:
[   12.667703] [drm]   Rect copy.
[   12.667704] [drm]   Cursor.
[   12.667705] [drm]   Cursor bypass.
[   12.667706] [drm]   Cursor bypass 2.
[   12.667708] [drm] VRAM at 0xfd000000 size is 16384 kiB
[   12.667710] [drm] MMIO at 0xfe000000 size is 64 kiB
[   12.667713] [drm] global init.
[   12.670806] [TTM] Zone  kernel: Available graphics memory: 767732 kiB.
[   12.670809] [TTM] Initializing pool allocator.
[   12.671081] [drm:vmw_driver_load] *ERROR* Hardware has no pitchlock
[   12.671177] [TTM] Finalizing pool allocator.
[   12.671194] [TTM] Zone  kernel: Used memory at exit: 0 kiB.
[   12.673513] vmwgfx: probe of 0000:00:02.0 failed with error -38
[   13.348898] FS-Cache: Netfs 'nfs' registered for caching
[   13.428740] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   13.612977] init: failsafe main process (730) killed by TERM signal
[   14.009645] nvidia: module license 'NVIDIA' taints kernel.
[   14.009649] Disabling lock debugging due to kernel taint
[   14.092719] NVRM: No NVIDIA graphics adapter found!
[   14.136937] init: plymouth-upstart-bridge main process (997) killed by TERM signal
[   14.310869] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[   15.593951] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   15.612781] NFSD: starting 90-second grace period
[   16.414447] init: plymouth-stop pre-start process (1462) terminated with status 1
[   18.370177] init: wait-for-job-state (vdr-frontendvdr) main process (1270) killed by TERM signal
[   22.464074] eth0: no IPv6 routers present

Display More

Diggo

Hallo Board,

da ich mit der Suche nicht sehr viele Treffer zu "emergency exit" bekomme mache ich mal einen weiteren auf.

Ich bin umgezogen und habe ein CineCT v6, die soweit auch gut läuft/lief. Das ganze rennt in einer DomU unter KVM. Die Karte ist über AMD-Vi ( wäre unter Intel VT-d) direkt durchgereicht und wie gesagt sie funktioniert(e) auch einwandfrei. Heute Abend war ich weg und wollte mal testen wie gut ich mit 2 Tunern parallel aufnehmen kann (habe nur die Karte ohne Extensions, also nur 2 DVB-C Tuner drauf). Dazu habe ich mal random ein paar Filme getimed, die sich teilweise in der Zeit überschnitten haben, aber nie mehr als 2 Tuner gleichzeitig belegt hatten.
Als Treiber verwende ich die von UFO. Die Installation ist ein YaVDR 0.5, der im Webinterface auf "headless" gestellt wurde.

Leider ist nach 50 MB der ersten Aufnahme (hier Cold Mountain) komplett alles zusammengebrochen und das Einzige was ich sehe, ist das Emergency Exit im Syslog wegen einem "Stream Broken". Bisher hatte ich immer DVB-S2 und wollte fragen, wo ich jetzt am besten nach dem Fehler suche, was die Ursache sein könnte usw...

Syslog:

Display Spoiler

Mar 2 19:09:49 VDRServ001 vdr: [8074] timer 1 (2 2013-2155 'Cecelia Ahern Mein ganzes halbes Leben') set to event Son 02.03.2014 20:15-21:45 (VPS: 02.03. 20:15) 'Cecelia Ahern Mein ganzes halbes Leben'
Mar 2 19:09:49 VDRServ001 vdr: [8074] timer 1 (7 2013-2320 'Unterwegs nach Cold Mountain') set to event Son 02.03.2014 20:15-23:10 'Unterwegs nach Cold Mountain'
Mar 2 19:09:50 VDRServ001 vdr: [8080] timer 1 (3 2308-0105 'Ghost Rider: Spirit of Vengeance') set to event Son 02.03.2014 23:10-00:55 'Ghost Rider: Spirit of Vengeance'
Mar 2 19:09:50 VDRServ001 vdr: [8080] timer 1 (8 0036-0110 'red! Der Oscar-Countdown 2014') set to event Mon 03.03.2014 00:38-01:00 'red! Der Oscar-Countdown 2014'
Mar 2 19:09:50 VDRServ001 vdr: [8080] timer 1 (8 0058-0140 'red! Carpet - Live beim Oscar 2014') set to event Mon 03.03.2014 01:00-01:30 'red! Carpet - Live beim Oscar 2014'
Mar 2 19:09:50 VDRServ001 vdr: [8080] timer 1 (8 0128-0615 'Oscar 2014 - Die Academy Awards - live aus L.A.') set to event Mon 03.03.2014 01:30-06:05 'Oscar 2014 - Die Academy Awards - live aus L.A.'
Mar 2 19:09:50 VDRServ001 vdr: [8080] timer 1 (2 2013-2155 'Cecelia Ahern Mein ganzes halbes Leben') set to event Son 02.03.2014 20:15-21:45 (VPS: 02.03. 20:15) 'Cecelia Ahern Mein ganzes halbes Leben'
Mar 2 19:09:50 VDRServ001 vdr: [8080] timer 1 (7 2013-2320 'Unterwegs nach Cold Mountain') set to event Son 02.03.2014 20:15-23:10 'Unterwegs nach Cold Mountain'
Mar 2 19:09:51 VDRServ001 vdr: [8073] timer 1 (3 2308-0105 'Ghost Rider: Spirit of Vengeance') set to event Son 02.03.2014 23:10-00:55 'Ghost Rider: Spirit of Vengeance'
Mar 2 19:09:51 VDRServ001 vdr: [8073] timer 1 (8 0036-0110 'red! Der Oscar-Countdown 2014') set to event Mon 03.03.2014 00:38-01:00 'red! Der Oscar-Countdown 2014'
Mar 2 19:09:51 VDRServ001 vdr: [8073] timer 1 (8 0058-0140 'red! Carpet - Live beim Oscar 2014') set to event Mon 03.03.2014 01:00-01:30 'red! Carpet - Live beim Oscar 2014'
Mar 2 19:09:51 VDRServ001 vdr: [8073] timer 1 (8 0128-0615 'Oscar 2014 - Die Academy Awards - live aus L.A.') set to event Mon 03.03.2014 01:30-06:05 'Oscar 2014 - Die Academy Awards - live aus L.A.'
Mar 2 19:09:51 VDRServ001 vdr: [8073] timer 1 (2 2013-2155 'Cecelia Ahern Mein ganzes halbes Leben') set to event Son 02.03.2014 20:15-21:45 (VPS: 02.03. 20:15) 'Cecelia Ahern Mein ganzes halbes Leben'
Mar 2 19:09:51 VDRServ001 vdr: [8073] timer 1 (7 2013-2320 'Unterwegs nach Cold Mountain') set to event Son 02.03.2014 20:15-23:10 'Unterwegs nach Cold Mountain'
Mar 2 19:09:52 VDRServ001 vdr: [1433] timer 1 (3 2308-0105 'Ghost Rider: Spirit of Vengeance') set to event Son 02.03.2014 23:10-00:55 'Ghost Rider: Spirit of Vengeance'
Mar 2 19:09:52 VDRServ001 vdr: [1433] timer 1 (8 0036-0110 'red! Der Oscar-Countdown 2014') set to event Mon 03.03.2014 00:38-01:00 'red! Der Oscar-Countdown 2014'
Mar 2 19:09:52 VDRServ001 vdr: [1433] timer 1 (8 0058-0140 'red! Carpet - Live beim Oscar 2014') set to event Mon 03.03.2014 01:00-01:30 'red! Carpet - Live beim Oscar 2014'
Mar 2 19:09:52 VDRServ001 vdr: [1433] timer 1 (8 0128-0615 'Oscar 2014 - Die Academy Awards - live aus L.A.') set to event Mon 03.03.2014 01:30-06:05 'Oscar 2014 - Die Academy Awards - live aus L.A.'
Mar 2 19:09:52 VDRServ001 vdr: [1433] timer 1 (2 2013-2155 'Cecelia Ahern Mein ganzes halbes Leben') set to event Son 02.03.2014 20:15-21:45 (VPS: 02.03. 20:15) 'Cecelia Ahern Mein ganzes halbes Leben'
Mar 2 19:09:52 VDRServ001 vdr: [1433] timer 1 (7 2013-2320 'Unterwegs nach Cold Mountain') set to event Son 02.03.2014 20:15-23:10 'Unterwegs nach Cold Mountain'
Mar 2 19:09:53 VDRServ001 vdr: [8074] timer 1 (3 2308-0105 'Ghost Rider: Spirit of Vengeance') set to event Son 02.03.2014 23:10-00:55 'Ghost Rider: Spirit of Vengeance'
Mar 2 19:09:53 VDRServ001 vdr: [8074] timer 1 (8 0036-0110 'red! Der Oscar-Countdown 2014') set to event Mon 03.03.2014 00:38-01:00 'red! Der Oscar-Countdown 2014'
Mar 2 19:09:53 VDRServ001 vdr: [8074] timer 1 (8 0058-0140 'red! Carpet - Live beim Oscar 2014') set to event Mon 03.03.2014 01:00-01:30 'red! Carpet - Live beim Oscar 2014'
Mar 2 19:09:53 VDRServ001 vdr: [8074] timer 1 (8 0128-0615 'Oscar 2014 - Die Academy Awards - live aus L.A.') set to event Mon 03.03.2014 01:30-06:05 'Oscar 2014 - Die Academy Awards - live aus L.A.'
Mar 2 19:09:53 VDRServ001 vdr: [8074] timer 1 (2 2013-2155 'Cecelia Ahern Mein ganzes halbes Leben') set to event Son 02.03.2014 20:15-21:45 (VPS: 02.03. 20:15) 'Cecelia Ahern Mein ganzes halbes Leben'
Mar 2 19:09:53 VDRServ001 vdr: [8074] timer 1 (7 2013-2320 'Unterwegs nach Cold Mountain') set to event Son 02.03.2014 20:15-23:10 'Unterwegs nach Cold Mountain'
Mar 2 19:10:00 VDRServ001 vdr: [1441] EPGSearch: timer conflict check started
Mar 2 19:10:00 VDRServ001 vdr: [1441] timer 1 (3 2308-0105 'Ghost Rider: Spirit of Vengeance') set to event Son 02.03.2014 23:10-00:55 'Ghost Rider: Spirit of Vengeance'
Mar 2 19:10:00 VDRServ001 vdr: [1441] timer 1 (8 0036-0110 'red! Der Oscar-Countdown 2014') set to event Mon 03.03.2014 00:38-01:00 'red! Der Oscar-Countdown 2014'
Mar 2 19:10:00 VDRServ001 vdr: [1441] timer 1 (8 0058-0140 'red! Carpet - Live beim Oscar 2014') set to event Mon 03.03.2014 01:00-01:30 'red! Carpet - Live beim Oscar 2014'
Mar 2 19:10:00 VDRServ001 vdr: [1441] timer 1 (8 0128-0615 'Oscar 2014 - Die Academy Awards - live aus L.A.') set to event Mon 03.03.2014 01:30-06:05 'Oscar 2014 - Die Academy Awards - live aus L.A.'
Mar 2 19:10:00 VDRServ001 vdr: [1441] timer 1 (2 2013-2155 'Cecelia Ahern Mein ganzes halbes Leben') set to event Son 02.03.2014 20:15-21:45 (VPS: 02.03. 20:15) 'Cecelia Ahern Mein ganzes halbes Leben'
Mar 2 19:10:00 VDRServ001 vdr: [1441] timer 1 (7 2013-2320 'Unterwegs nach Cold Mountain') set to event Son 02.03.2014 20:15-23:10 'Unterwegs nach Cold Mountain'
Mar 2 19:10:00 VDRServ001 vdr: [1441] EPGSearch: timer conflict check finished
Mar 2 19:12:21 VDRServ001 vdr: [8128] epg data writer thread started (pid=991, tid=8128, prio=low)
Mar 2 19:12:21 VDRServ001 vdr: [8128] epg data writer thread ended (pid=991, tid=8128)
Mar 2 19:12:22 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 30, tp 658
Mar 2 19:12:43 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 65, tp 746
Mar 2 19:14:42 VDRServ001 vdr: [1426] channel 2 (ZDF HD) event Son 02.03.2014 19:10-19:28 (VPS: 02.03. 19:10) 'Berlin direkt' status 4
Mar 2 19:17:01 VDRServ001 CRON[8153]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Mar 2 19:20:46 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 30, tp 658
Mar 2 19:21:07 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 65, tp 746
Mar 2 19:22:22 VDRServ001 vdr: [8182] epg data writer thread started (pid=991, tid=8182, prio=low)
Mar 2 19:22:23 VDRServ001 vdr: [8182] epg data writer thread ended (pid=991, tid=8182)
Mar 2 19:29:10 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 30, tp 658
Mar 2 19:29:31 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 65, tp 746
Mar 2 19:31:29 VDRServ001 vdr: [1426] channel 2 (ZDF HD) event Son 02.03.2014 19:30-20:15 (VPS: 02.03. 19:30) 'Terra X F wie Fälschung' status 4
Mar 2 19:32:23 VDRServ001 vdr: [8238] epg data writer thread started (pid=991, tid=8238, prio=low)
Mar 2 19:32:24 VDRServ001 vdr: [8238] epg data writer thread ended (pid=991, tid=8238)
Mar 2 19:32:53 VDRServ001 vdr: [1426] changing pids of channel 35 from 601+601=2:602=deu@3,603=mis@3:0:604 to 501+501=2:502=deu@3,503=mis@3:0:504
Mar 2 19:32:54 VDRServ001 vdr: [1426] changing pids of channel 38 from 2601+2601=2:2602=deu@3,2603=mis@3:0:2604 to 2401+2401=2:2402=deu@3,2403=mis@3:0:2604
Mar 2 19:32:55 VDRServ001 vdr: [1426] changing pids of channel 39 from 2601+2601=2:2602=deu@3,2603=mis@3:0:2604 to 2501+2501=2:2502=deu@3,2503=mis@3:0:2604
Mar 2 19:32:56 VDRServ001 vdr: [1426] changing pids of channel 40 from 2601+2601=2:2602=deu@3,2603=mis@3:0:2604 to 2701+2701=2:2702=deu@3,2703=mis@3:0:2604
Mar 2 19:32:56 VDRServ001 vdr: [1426] changing pids of channel 41 from 2801+2801=2:2802=deu@3,2803=mis@3:0:2804 to 2901+2901=2:2902=deu@3,2903=mis@3:0:2904
Mar 2 19:32:57 VDRServ001 vdr: [1426] changing pids of channel 18 from 3001+3001=2:3002=deu@3,3003=mis@3:0:3004 to 2901+2901=2:2902=deu@3,2903=mis@3:0:2904
Mar 2 19:34:30 VDRServ001 vdr: [1423] read incomplete section - len = 421, r = 107
Mar 2 19:37:34 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 30, tp 658
Mar 2 19:37:55 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 65, tp 746
Mar 2 19:40:00 VDRServ001 vdr: [1441] EPGSearch: timer conflict check started
Mar 2 19:40:00 VDRServ001 vdr: [1441] timer 1 (3 2308-0105 'Ghost Rider: Spirit of Vengeance') set to event Son 02.03.2014 23:10-00:55 'Ghost Rider: Spirit of Vengeance'
Mar 2 19:40:00 VDRServ001 vdr: [1441] timer 1 (8 0036-0110 'red! Der Oscar-Countdown 2014') set to event Mon 03.03.2014 00:38-01:00 'red! Der Oscar-Countdown 2014'
Mar 2 19:40:00 VDRServ001 vdr: [1441] timer 1 (8 0058-0140 'red! Carpet - Live beim Oscar 2014') set to event Mon 03.03.2014 01:00-01:30 'red! Carpet - Live beim Oscar 2014'
Mar 2 19:40:00 VDRServ001 vdr: [1441] timer 1 (8 0128-0615 'Oscar 2014 - Die Academy Awards - live aus L.A.') set to event Mon 03.03.2014 01:30-06:05 'Oscar 2014 - Die Academy Awards - live aus L.A.'
Mar 2 19:40:00 VDRServ001 vdr: [1441] timer 1 (2 2013-2155 'Cecelia Ahern Mein ganzes halbes Leben') set to event Son 02.03.2014 20:15-21:45 (VPS: 02.03. 20:15) 'Cecelia Ahern Mein ganzes halbes Leben'
Mar 2 19:40:00 VDRServ001 vdr: [1441] timer 1 (7 2013-2320 'Unterwegs nach Cold Mountain') set to event Son 02.03.2014 20:15-23:10 'Unterwegs nach Cold Mountain'
Mar 2 19:40:00 VDRServ001 vdr: [1441] EPGSearch: timer conflict check finished
Mar 2 19:42:24 VDRServ001 vdr: [8292] epg data writer thread started (pid=991, tid=8292, prio=low)
Mar 2 19:42:24 VDRServ001 vdr: [8292] epg data writer thread ended (pid=991, tid=8292)
Mar 2 19:45:58 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 30, tp 658
Mar 2 19:46:19 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 65, tp 746
Mar 2 19:52:25 VDRServ001 vdr: [8344] epg data writer thread started (pid=991, tid=8344, prio=low)
Mar 2 19:52:26 VDRServ001 vdr: [8344] epg data writer thread ended (pid=991, tid=8344)
Mar 2 19:54:22 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 30, tp 658
Mar 2 19:54:43 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 65, tp 746
Mar 2 20:02:26 VDRServ001 vdr: [8398] epg data writer thread started (pid=991, tid=8398, prio=low)
Mar 2 20:02:26 VDRServ001 vdr: [8398] epg data writer thread ended (pid=991, tid=8398)
Mar 2 20:02:46 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 30, tp 658
Mar 2 20:03:07 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 65, tp 746
Mar 2 20:06:30 VDRServ001 vdr: [1426] changing pids of channel 35 from 501+501=2:502=deu@3,503=mis@3:0:504 to 601+601=2:602=deu@3,603=mis@3:0:604
Mar 2 20:06:31 VDRServ001 vdr: [1426] changing pids of channel 38 from 2401+2401=2:2402=deu@3,2403=mis@3:0:2604 to 2601+2601=2:2602=deu@3,2603=mis@3:0:2604
Mar 2 20:06:31 VDRServ001 vdr: [1426] changing pids of channel 39 from 2501+2501=2:2502=deu@3,2503=mis@3:0:2604 to 2601+2601=2:2602=deu@3,2603=mis@3:0:2604
Mar 2 20:06:32 VDRServ001 vdr: [1426] changing pids of channel 40 from 2701+2701=2:2702=deu@3,2703=mis@3:0:2604 to 2601+2601=2:2602=deu@3,2603=mis@3:0:2604
Mar 2 20:06:45 VDRServ001 vdr: [1426] read incomplete section - len = 1975, r = 1935
Mar 2 20:10:00 VDRServ001 vdr: [1441] EPGSearch: timer conflict check started
Mar 2 20:10:00 VDRServ001 vdr: [1441] timer 1 (3 2308-0105 'Ghost Rider: Spirit of Vengeance') set to event Son 02.03.2014 23:10-00:55 'Ghost Rider: Spirit of Vengeance'
Mar 2 20:10:00 VDRServ001 vdr: [1441] timer 1 (8 0036-0110 'red! Der Oscar-Countdown 2014') set to event Mon 03.03.2014 00:38-01:00 'red! Der Oscar-Countdown 2014'
Mar 2 20:10:00 VDRServ001 vdr: [1441] timer 1 (8 0058-0140 'red! Carpet - Live beim Oscar 2014') set to event Mon 03.03.2014 01:00-01:30 'red! Carpet - Live beim Oscar 2014'
Mar 2 20:10:00 VDRServ001 vdr: [1441] timer 1 (8 0128-0615 'Oscar 2014 - Die Academy Awards - live aus L.A.') set to event Mon 03.03.2014 01:30-06:05 'Oscar 2014 - Die Academy Awards - live aus L.A.'
Mar 2 20:10:00 VDRServ001 vdr: [1441] timer 1 (2 2013-2155 'Cecelia Ahern Mein ganzes halbes Leben') set to event Son 02.03.2014 20:15-21:45 (VPS: 02.03. 20:15) 'Cecelia Ahern Mein ganzes halbes Leben'
Mar 2 20:10:00 VDRServ001 vdr: [1441] timer 1 (7 2013-2320 'Unterwegs nach Cold Mountain') set to event Son 02.03.2014 20:15-23:10 'Unterwegs nach Cold Mountain'
Mar 2 20:10:00 VDRServ001 vdr: [1441] EPGSearch: timer conflict check finished
Mar 2 20:11:10 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 30, tp 658
Mar 2 20:11:31 VDRServ001 vdr: [1425] frontend 1/0 timed out while tuning to channel 65, tp 746
Mar 2 20:11:45 VDRServ001 vdr: [8073] timer 1 (2 2013-2155 'Cecelia Ahern Mein ganzes halbes Leben') set to event Son 02.03.2014 20:15-21:45 (VPS: 02.03. 20:15) 'Cecelia Ahern Mein ganzes halbes Leben'
Mar 2 20:11:45 VDRServ001 vdr: [8073] timer 1 (3 2308-0105 'Ghost Rider: Spirit of Vengeance') set to event Son 02.03.2014 23:10-00:55 'Ghost Rider: Spirit of Vengeance'
Mar 2 20:11:55 VDRServ001 vdr: [991] switching to channel 2
Mar 2 20:11:55 VDRServ001 vdr: [1445] TS buffer on device 1 thread ended (pid=991, tid=1445)
Mar 2 20:11:55 VDRServ001 vdr: [1444] buffer stats: 812348 (15%) used
Mar 2 20:11:55 VDRServ001 vdr: [1444] receiver on device 1 thread ended (pid=991, tid=1444)
Mar 2 20:11:55 VDRServ001 vdr: [8449] receiver on device 1 thread started (pid=991, tid=8449, prio=high)
Mar 2 20:11:55 VDRServ001 vdr: [8450] TS buffer on device 1 thread started (pid=991, tid=8450, prio=high)
Mar 2 20:12:00 VDRServ001 vdr: [991] switching device 2 to channel 7
Mar 2 20:12:04 VDRServ001 vdr: [1433] timer 1 (7 2013-2320 'Unterwegs nach Cold Mountain') set to event Son 02.03.2014 20:15-23:10 'Unterwegs nach Cold Mountain'
Mar 2 20:12:04 VDRServ001 vdr: [1433] timer 1 (8 0036-0110 'red! Der Oscar-Countdown 2014') set to event Mon 03.03.2014 00:38-01:00 'red! Der Oscar-Countdown 2014'
Mar 2 20:12:04 VDRServ001 vdr: [1433] timer 1 (8 0058-0140 'red! Carpet - Live beim Oscar 2014') set to event Mon 03.03.2014 01:00-01:30 'red! Carpet - Live beim Oscar 2014'
Mar 2 20:12:04 VDRServ001 vdr: [1433] timer 1 (8 0128-0615 'Oscar 2014 - Die Academy Awards - live aus L.A.') set to event Mon 03.03.2014 01:30-06:05 'Oscar 2014 - Die Academy Awards - live aus L.A.'
Mar 2 20:12:11 VDRServ001 vdr: [991] switching device 2 to channel 7
Mar 2 20:12:33 VDRServ001 vdr: [991] switching device 2 to channel 7
Mar 2 20:12:55 VDRServ001 vdr: [991] switching device 2 to channel 7
Mar 2 20:13:00 VDRServ001 vdr: [991] switching device 1 to channel 2
Mar 2 20:13:00 VDRServ001 vdr: [991] timer 5 (2 2013-2155 'Cecelia Ahern Mein ganzes halbes Leben') start
Mar 2 20:13:00 VDRServ001 vdr: [991] Title: 'Cecelia Ahern Mein ganzes halbes Leben' Subtitle: 'Liebesfilm D/2014'
Mar 2 20:13:00 VDRServ001 vdr: [991] executing '/usr/lib/vdr/vdr-recordingaction before "/srv/vdr/video.00/Cecelia_Ahern_Mein_ganzes_halbes_Leben/2014-03-02.20.13.2-0.rec"'
Mar 2 20:13:00 VDRServ001 vdr: [1429] VNSI: Timers state changed (11)
Mar 2 20:13:00 VDRServ001 vdr: [1429] VNSI: Requesting clients to reload timers
Mar 2 20:13:00 VDRServ001 vdr: [8074] timer 1 (3 2308-0105 'Ghost Rider: Spirit of Vengeance') set to event Son 02.03.2014 23:10-00:55 'Ghost Rider: Spirit of Vengeance'
Mar 2 20:13:00 VDRServ001 vdr: [8074] timer 1 (8 0036-0110 'red! Der Oscar-Countdown 2014') set to event Mon 03.03.2014 00:38-01:00 'red! Der Oscar-Countdown 2014'
Mar 2 20:13:00 VDRServ001 vdr: [8074] timer 1 (8 0058-0140 'red! Carpet - Live beim Oscar 2014') set to event Mon 03.03.2014 01:00-01:30 'red! Carpet - Live beim Oscar 2014'
Mar 2 20:13:00 VDRServ001 vdr: [8074] timer 1 (8 0128-0615 'Oscar 2014 - Die Academy Awards - live aus L.A.') set to event Mon 03.03.2014 01:30-06:05 'Oscar 2014 - Die Academy Awards - live aus L.A.'
Mar 2 20:13:00 VDRServ001 vdr: [8074] timer 1 (2 2013-2155 'Cecelia Ahern Mein ganzes halbes Leben') set to event Son 02.03.2014 20:15-21:45 (VPS: 02.03. 20:15) 'Cecelia Ahern Mein ganzes halbes Leben'
Mar 2 20:13:00 VDRServ001 vdr: [8074] timer 1 (7 2013-2320 'Unterwegs nach Cold Mountain') set to event Son 02.03.2014 20:15-23:10 'Unterwegs nach Cold Mountain'
Mar 2 20:13:00 VDRServ001 recordingaction: executing /usr/share/vdr/recording-hooks/R90.custom before recording /srv/vdr/video.00/Cecelia_Ahern_Mein_ganzes_halbes_Leben/2014-03-02.20.13.2-0.rec
Mar 2 20:13:00 VDRServ001 vdr: [991] record /srv/vdr/video.00/Cecelia_Ahern_Mein_ganzes_halbes_Leben/2014-03-02.20.13.2-0.rec
Mar 2 20:13:00 VDRServ001 vdr: [991] creating directory /srv/vdr/video.00/Cecelia_Ahern_Mein_ganzes_halbes_Leben
Mar 2 20:13:01 VDRServ001 vdr: [991] creating directory /srv/vdr/video.00/Cecelia_Ahern_Mein_ganzes_halbes_Leben/2014-03-02.20.13.2-0.rec
Mar 2 20:13:01 VDRServ001 vdr: [991] recording to '/srv/vdr/video.00/Cecelia_Ahern_Mein_ganzes_halbes_Leben/2014-03-02.20.13.2-0.rec/00001.ts'
Mar 2 20:13:01 VDRServ001 vdr: [8460] recording thread started (pid=991, tid=8460, prio=high)
Mar 2 20:13:01 VDRServ001 vdr: [991] markad: executing "/usr/bin"/markad -l "/var/lib/markad" --online=2 before "/srv/vdr/video.00/Cecelia_Ahern_Mein_ganzes_halbes_Leben/2014-03-02.20.13.2-0.rec"
Mar 2 20:13:01 VDRServ001 markad: [8462] starting v0.1.5pre (64bit)
Mar 2 20:13:01 VDRServ001 markad: [8462] on /srv/vdr/video.00/Cecelia_Ahern_Mein_ganzes_halbes_Leben/2014-03-02.20.13.2-0.rec
Mar 2 20:13:02 VDRServ001 vdr: [1429] VNSI: Recordings state changed (7)
Mar 2 20:13:02 VDRServ001 vdr: [1429] VNSI: Requesting clients to reload recordings list
Mar 2 20:13:02 VDRServ001 vdr: [1431] XVDR: Recordings state changed (7)
Mar 2 20:13:03 VDRServ001 vdr: [991] switching device 2 to channel 7
Mar 2 20:13:03 VDRServ001 vdr: [991] timer 6 (7 2013-2320 'Unterwegs nach Cold Mountain') start
Mar 2 20:13:03 VDRServ001 vdr: [991] Title: 'Unterwegs nach Cold Mountain' Subtitle: 'Kriegsdrama über einen frisch verliebten jungen Mann, der 1860 in North Carolina in den Bürgerkrieg ziehen muss. Schwer verletzt desertiert er, bis ihn ein Milizenchef jagt.'
Mar 2 20:13:03 VDRServ001 vdr: [991] executing '/usr/lib/vdr/vdr-recordingaction before "/srv/vdr/video.00/Unterwegs_nach_Cold_Mountain/2014-03-02.20.13.7-0.rec"'
Mar 2 20:13:03 VDRServ001 recordingaction: executing /usr/share/vdr/recording-hooks/R90.custom before recording /srv/vdr/video.00/Unterwegs_nach_Cold_Mountain/2014-03-02.20.13.7-0.rec
Mar 2 20:13:03 VDRServ001 vdr: [991] record /srv/vdr/video.00/Unterwegs_nach_Cold_Mountain/2014-03-02.20.13.7-0.rec
Mar 2 20:13:03 VDRServ001 vdr: [991] creating directory /srv/vdr/video.00/Unterwegs_nach_Cold_Mountain
Mar 2 20:13:03 VDRServ001 vdr: [991] creating directory /srv/vdr/video.00/Unterwegs_nach_Cold_Mountain/2014-03-02.20.13.7-0.rec
Mar 2 20:13:03 VDRServ001 vdr: [1429] VNSI: Timers state changed (12)
Mar 2 20:13:03 VDRServ001 vdr: [1429] VNSI: Requesting clients to reload timers
Mar 2 20:13:03 VDRServ001 vdr: [991] recording to '/srv/vdr/video.00/Unterwegs_nach_Cold_Mountain/2014-03-02.20.13.7-0.rec/00001.ts'
Mar 2 20:13:03 VDRServ001 vdr: [8470] receiver on device 2 thread started (pid=991, tid=8470, prio=high)
Mar 2 20:13:03 VDRServ001 vdr: [8469] recording thread started (pid=991, tid=8469, prio=high)
Mar 2 20:13:03 VDRServ001 vdr: [8471] TS buffer on device 2 thread started (pid=991, tid=8471, prio=high)
Mar 2 20:13:03 VDRServ001 vdr: [991] markad: executing "/usr/bin"/markad -l "/var/lib/markad" --online=2 before "/srv/vdr/video.00/Unterwegs_nach_Cold_Mountain/2014-03-02.20.13.7-0.rec"
Mar 2 20:13:03 VDRServ001 markad: [8473] starting v0.1.5pre (64bit)
Mar 2 20:13:03 VDRServ001 markad: [8473] on /srv/vdr/video.00/Unterwegs_nach_Cold_Mountain/2014-03-02.20.13.7-0.rec
Mar 2 20:13:04 VDRServ001 vdr: [1431] XVDR: Recordings state changed (8)
Mar 2 20:13:04 VDRServ001 vdr: [1429] VNSI: Recordings state changed (8)
Mar 2 20:13:04 VDRServ001 vdr: [1429] VNSI: Requesting clients to reload recordings list
Mar 2 20:13:06 VDRServ001 vdr: [1431] XVDR: Starting garbage collection in recordings cache
Mar 2 20:13:06 VDRServ001 vdr: [1431] XVDR: Requesting clients to reload recordings list
Mar 2 20:13:06 VDRServ001 vdr: [1433] timer 1 (3 2308-0105 'Ghost Rider: Spirit of Vengeance') set to event Son 02.03.2014 23:10-00:55 'Ghost Rider: Spirit of Vengeance'
Mar 2 20:13:06 VDRServ001 vdr: [1433] timer 1 (8 0036-0110 'red! Der Oscar-Countdown 2014') set to event Mon 03.03.2014 00:38-01:00 'red! Der Oscar-Countdown 2014'
Mar 2 20:13:06 VDRServ001 vdr: [1433] timer 1 (8 0058-0140 'red! Carpet - Live beim Oscar 2014') set to event Mon 03.03.2014 01:00-01:30 'red! Carpet - Live beim Oscar 2014'
Mar 2 20:13:06 VDRServ001 vdr: [1433] timer 1 (8 0128-0615 'Oscar 2014 - Die Academy Awards - live aus L.A.') set to event Mon 03.03.2014 01:30-06:05 'Oscar 2014 - Die Academy Awards - live aus L.A.'
Mar 2 20:13:06 VDRServ001 vdr: [1433] timer 1 (2 2013-2155 'Cecelia Ahern Mein ganzes halbes Leben') set to event Son 02.03.2014 20:15-21:45 (VPS: 02.03. 20:15) 'Cecelia Ahern Mein ganzes halbes Leben'
Mar 2 20:13:06 VDRServ001 vdr: [1433] timer 1 (7 2013-2320 'Unterwegs nach Cold Mountain') set to event Son 02.03.2014 20:15-23:10 'Unterwegs nach Cold Mountain'
Mar 2 20:13:11 VDRServ001 markad: [8462] broadcast aspectratio 16:9 (from info)
Mar 2 20:13:11 VDRServ001 markad: [8462] getting broadcast start from info mtime
Mar 2 20:13:12 VDRServ001 markad: [8462] pre-timer 1m
Mar 2 20:13:12 VDRServ001 markad: [8462] broadcast length 90m
Mar 2 20:13:12 VDRServ001 markad: [8462] found H264-video (0x17de)
Mar 2 20:13:12 VDRServ001 markad: [8462] found AC3 (0x17ea)
Mar 2 20:13:12 VDRServ001 markad: [8462] using libavcodec.so.53.35.0 with 2 threads
Mar 2 20:13:12 VDRServ001 markad: [8462] using codec H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10
Mar 2 20:13:12 VDRServ001 markad: [8462] channel ZDF_HD
Mar 2 20:13:12 VDRServ001 markad: [8462] HDTV 1280x720p50
Mar 2 20:13:27 VDRServ001 markad: [8462] detected logo start (401)*
Mar 2 20:13:34 VDRServ001 vdr: [8469] ERROR: video data stream broken
Mar 2 20:13:34 VDRServ001 vdr: [8469] initiating emergency exit
Mar 2 20:13:34 VDRServ001 vdr: [991] emergency exit requested - shutting down
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: dynamite
Mar 2 20:13:34 VDRServ001 vdr: [991] dynamite: force detaching all devices
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: markad
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: restfulapi
Mar 2 20:13:34 VDRServ001 vdr: [991] restfulapi: will end server thread: /1393787614/
Mar 2 20:13:34 VDRServ001 vdr: [1442] restfulapi: server thread end: /1393787614/
Mar 2 20:13:34 VDRServ001 vdr: [1442] restfulapi: server thread ended (pid=991)
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: femon
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: wirbelscan
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: epgsearch
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: epgsearchonly
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: conflictcheckonly
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: xvdr
Mar 2 20:13:34 VDRServ001 vdr: [1431] loading /var/lib/vdr/plugins/xvdr/allowed_hosts.conf
Mar 2 20:13:34 VDRServ001 vdr: [1431] XVDR: Client 192.168.0.199:33456 with ID 3 connected.
Mar 2 20:13:34 VDRServ001 vdr: [1431] VDR XVDR Server thread ended (pid=991, tid=1431)
Mar 2 20:13:34 VDRServ001 vdr: [8476] XVDR: Welcome client 'XVDR Client' with protocol version '5'
Mar 2 20:13:34 VDRServ001 vdr: [8476] XVDR: Preferred language: deu,ger / type: 1
Mar 2 20:13:34 VDRServ001 vdr: [8476] XVDR: Channellist filter:
Mar 2 20:13:34 VDRServ001 vdr: [8476] XVDR: Free To Air channels: Yes
Mar 2 20:13:34 VDRServ001 vdr: [8476] XVDR: Only native language: No
Mar 2 20:13:34 VDRServ001 vdr: [8476] XVDR: Enabled CaIDs:
Mar 2 20:13:34 VDRServ001 vdr: [8476] XVDR: Setting channel update method: 3
Mar 2 20:13:34 VDRServ001 vdr: [8476] XVDR: Connected to wirbelscan plugin ...
Mar 2 20:13:34 VDRServ001 vdr: [8476] XVDR: wirbelscan plugin version: 0.0.7
Mar 2 20:13:34 VDRServ001 vdr: [991] XVDR: XVDR Server stopped
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: skinpearlhd
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: dbus2vdr
Mar 2 20:13:34 VDRServ001 vdr: [1430] dbus2vdr: System: error: The connection is closed
Mar 2 20:13:34 VDRServ001 vdr: [1430] dbus2vdr: upstart replies: (null)
Mar 2 20:13:34 VDRServ001 vdr: [991] dbus2vdr: thread-pool for handling signal-emits stopped
Mar 2 20:13:34 VDRServ001 vdr: [1430] dbus2vdr: mainloop stopped
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: vnsiserver3
Mar 2 20:13:34 VDRServ001 vdr: [1429] VDR VNSI Server thread ended (pid=991, tid=1429)
Mar 2 20:13:34 VDRServ001 vdr: [991] VNSI: VNSI Server stopped
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: channellists
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: iptv
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: quickepgsearch
Mar 2 20:13:34 VDRServ001 vdr: [991] stopping plugin: streamdev-server
Mar 2 20:13:35 VDRServ001 vdr: [1428] streamdev server thread ended (pid=991, tid=1428)
Mar 2 20:13:35 VDRServ001 vdr: [991] stopping plugin: live
Mar 2 20:13:35 VDRServ001 vdr: [991] stopping plugin: dummydevice
Mar 2 20:13:35 VDRServ001 vdr: [8460] recording thread ended (pid=991, tid=8460)
Mar 2 20:13:35 VDRServ001 vdr: [991] buffer stats: 498952 (2%) used
Mar 2 20:13:35 VDRServ001 vdr: [991] timer 5 (2 2013-2155 'Cecelia Ahern Mein ganzes halbes Leben') stop
Mar 2 20:13:35 VDRServ001 vdr: [991] executing '/usr/lib/vdr/vdr-recordingaction after "/srv/vdr/video.00/Cecelia_Ahern_Mein_ganzes_halbes_Leben/2014-03-02.20.13.2-0.rec"'
Mar 2 20:13:36 VDRServ001 recordingaction: executing /usr/share/vdr/recording-hooks/R90.custom after recording /srv/vdr/video.00/Cecelia_Ahern_Mein_ganzes_halbes_Leben/2014-03-02.20.13.2-0.rec
Mar 2 20:13:36 VDRServ001 vdr: [8469] recording thread ended (pid=991, tid=8469)
Mar 2 20:13:36 VDRServ001 vdr: [991] buffer stats: 0 (0%) used
Mar 2 20:13:36 VDRServ001 vdr: [991] timer 6 (7 2013-2320 'Unterwegs nach Cold Mountain') stop
Mar 2 20:13:36 VDRServ001 vdr: [991] executing '/usr/lib/vdr/vdr-recordingaction after "/srv/vdr/video.00/Unterwegs_nach_Cold_Mountain/2014-03-02.20.13.7-0.rec"'
Mar 2 20:13:36 VDRServ001 recordingaction: executing /usr/share/vdr/recording-hooks/R90.custom after recording /srv/vdr/video.00/Unterwegs_nach_Cold_Mountain/2014-03-02.20.13.7-0.rec
Mar 2 20:13:36 VDRServ001 vdr: [8471] TS buffer on device 2 thread ended (pid=991, tid=8471)
Mar 2 20:13:36 VDRServ001 vdr: [8470] buffer stats: 0 (0%) used
Mar 2 20:13:36 VDRServ001 vdr: [8470] receiver on device 2 thread ended (pid=991, tid=8470)
Mar 2 20:13:36 VDRServ001 vdr: [8450] TS buffer on device 1 thread ended (pid=991, tid=8450)
Mar 2 20:13:36 VDRServ001 vdr: [8449] buffer stats: 490868 (9%) used
Mar 2 20:13:36 VDRServ001 vdr: [8449] receiver on device 1 thread ended (pid=991, tid=8449)
Mar 2 20:13:36 VDRServ001 vdr: [991] saved setup to /var/lib/vdr/setup.conf
Mar 2 20:13:36 VDRServ001 vdr: [1423] section handler thread ended (pid=991, tid=1423)
Mar 2 20:13:36 VDRServ001 vdr: [1422] tuner on frontend 0/0 thread ended (pid=991, tid=1422)
Mar 2 20:13:36 VDRServ001 vdr: [991] dynamite: deleted device for /dev/dvb/adapter0/frontend0
Mar 2 20:13:36 VDRServ001 vdr: [1426] section handler thread ended (pid=991, tid=1426)
Mar 2 20:13:36 VDRServ001 vdr: [1425] tuner on frontend 1/0 thread ended (pid=991, tid=1425)
Mar 2 20:13:36 VDRServ001 vdr: [991] dynamite: deleted device for /dev/dvb/adapter1/frontend0
Mar 2 20:13:37 VDRServ001 vdr: [1420] section handler thread ended (pid=991, tid=1420)
Mar 2 20:13:37 VDRServ001 vdr: [1419] IPTV section handler thread ended (pid=991, tid=1419)
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: dynamite
Mar 2 20:13:37 VDRServ001 vdr: [1411] dynamite udev monitor for subsystem dvb thread ended (pid=991, tid=1411)
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: markad
Mar 2 20:13:37 VDRServ001 vdr: [991] markad: terminating pid 8462
Mar 2 20:13:37 VDRServ001 markad: [8462] aborted by user
Mar 2 20:13:37 VDRServ001 markad: [8462] got errno 4 while waiting for new data
Mar 2 20:13:37 VDRServ001 vdr: [991] markad: terminating pid 8473
Mar 2 20:13:37 VDRServ001 markad: [8473] aborted by user
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: restfulapi
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: femon
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: wirbelscan
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: epgsearch
Mar 2 20:13:37 VDRServ001 vdr: [1441] EPGSearch: Leaving conflict check thread
Mar 2 20:13:37 VDRServ001 vdr: [1441] EPGSearch: conflictcheck thread ended (pid=991, tid=1441)
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: epgsearchonly
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: conflictcheckonly
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: xvdr
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: skinpearlhd
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: dbus2vdr
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: vnsiserver3
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: channellists
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: iptv
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: quickepgsearch
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: streamdev-server
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: live
Mar 2 20:13:37 VDRServ001 vdr: [991] deleting plugin: dummydevice
Mar 2 20:13:38 VDRServ001 vdr: [991] emergency exit!
Mar 2 20:13:38 VDRServ001 vdr: [991] exiting, exit code 1
Mar 2 20:13:38 VDRServ001 kernel: [74008.932393] init: vdr main process (991) terminated with status 1
Mar 2 20:14:17 VDRServ001 markad: [8473] no PAT/PMT found (-2) -> cannot process
Mar 2 20:17:01 VDRServ001 CRON[8503]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Mar 2 21:17:01 VDRServ001 CRON[8634]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Mar 2 22:17:01 VDRServ001 CRON[8765]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Mar 2 23:17:01 VDRServ001 CRON[8896]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Mar 3 00:17:01 VDRServ001 CRON[9028]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Mar 3 01:17:01 VDRServ001 CRON[9567]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)

Dmesg:

Display Spoiler

root@VDRServ001:/var/log# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-59-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #90-Ubuntu SMP Tue Jan 7 22:43:51 UTC 2014 (Ubuntu 3.2.0-59.90-generic 3.2.54)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-59-generic root=UUID=9506fa9f-b32d-41c1-aa53-321bdbd99f86 ro vmalloc=256m splash irqpoll vga=792 noresume nohz=off acpi_enforce_resources=lax
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005fffe000 (usable)
[ 0.000000] BIOS-e820: 000000005fffe000 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x5fffe max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f17a0] f17a0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000005fffe000
[ 0.000000] 0000000000 - 0040000000 page 1G
[ 0.000000] 0040000000 - 005fe00000 page 2M
[ 0.000000] 005fe00000 - 005fffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 5fffe000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 363fc000 - 371f6000
[ 0.000000] ACPI: RSDP 00000000000f1610 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000005fffe3f0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000005fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000005fffe430 01137 (v01 BXPC BXDSDT 00000001 INTL 20130823)
[ 0.000000] ACPI: FACS 000000005fffff40 00040
[ 0.000000] ACPI: SSDT 000000005ffff6a0 00899 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000005ffff5b0 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000005ffff570 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000005fffe000
[ 0.000000] Initmem setup node 0 0000000000000000-000000005fffe000
[ 0.000000] NODE_DATA [000000005fff9000 - 000000005fffdfff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1cfa741, boot clock
[ 0.000000] [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005de00000-ffff88005f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0005fffe
[ 0.000000] On node 0 totalpages: 393101
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6080 pages used for memmap
[ 0.000000] DMA32 zone: 383038 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9effc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88005fc00000 s83136 r8192 d23360 u1048576
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] kvm-clock: cpu 0, msr 0:5fc13741, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 5fc0ddc0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386952
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-59-generic root=UUID=9506fa9f-b32d-41c1-aa53-321bdbd99f86 ro vmalloc=256m splash irqpoll vga=792 noresume nohz=off acpi_enforce_resources=lax
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1517460k/1572856k available (6592k kernel code, 452k absent, 54944k reserved, 6614k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12582912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Detected 2809.376 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.008000] Calibrating delay loop (skipped) preset value.. 5618.75 BogoMIPS (lpj=11237504)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] Security Framework initialized
[ 0.008000] AppArmor: AppArmor initialized
[ 0.008000] Yama: becoming mindful.
[ 0.008000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.008000] Mount-cache hash table entries: 256
[ 0.008000] Initializing cgroup subsys cpuacct
[ 0.008000] Initializing cgroup subsys memory
[ 0.008000] Initializing cgroup subsys devices
[ 0.008000] Initializing cgroup subsys freezer
[ 0.008000] Initializing cgroup subsys blkio
[ 0.008000] Initializing cgroup subsys perf_event
[ 0.008000] mce: CPU supports 10 MCE banks
[ 0.011598] ACPI: Core revision 20110623
[ 0.012425] ftrace: allocating 26602 entries in 105 pages
[ 0.020241] Enabling x2apic
[ 0.020253] Enabled x2apic
[ 0.020416] Switched APIC routing to physical x2apic.
[ 0.021525] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.021529] CPU0: AMD Athlon(tm) II X4 630 Processor stepping 03
[ 0.024001] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.024001] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.024001] Booting Node 0, Processors #1 Ok.
[ 0.024001] smpboot cpu 1: start_ip = 9a000
[ 0.031794] NMI watchdog disabled (cpu1): hardware events not enabled
[ 0.031789] KVM setup async PF for cpu 1
[ 0.031819] Brought up 2 CPUs
[ 0.031821] Total of 2 processors activated (11237.50 BogoMIPS).
[ 0.031815] kvm-stealtime: cpu 1, msr 5fd0ddc0
[ 0.031815] kvm-clock: cpu 1, msr 0:5fd13741, secondary cpu clock
[ 0.032304] devtmpfs: initialized
[ 0.032965] EVM: security.selinux
[ 0.032968] EVM: security.SMACK64
[ 0.032970] EVM: security.capability
[ 0.033083] print_constraints: dummy:
[ 0.033083] RTC time: 22:40:08, date: 03/01/14
[ 0.033083] NET: Registered protocol family 16
[ 0.033083] Trying to unpack rootfs image as initramfs...
[ 0.040538] Extended Config Space enabled on 0 nodes
[ 0.040661] ACPI: bus type pci registered
[ 0.040755] PCI: Using configuration type 1 for base access
[ 0.040758] PCI: Using configuration type 1 for extended access
[ 0.041587] bio: create slab <bio-0> at 0
[ 0.041684] ACPI: Added _OSI(Module Device)
[ 0.041687] ACPI: Added _OSI(Processor Device)
[ 0.041690] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.041692] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.042161] ACPI: EC: Look up EC in DSDT
[ 0.043416] ACPI: Interpreter enabled
[ 0.043428] ACPI: (supports S0 S3 S4 S5)
[ 0.043443] ACPI: Using IOAPIC for interrupt routing
[ 0.045781] ACPI: No dock devices found.
[ 0.045788] HEST: Table not found.
[ 0.045792] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.045841] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.045928] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.045932] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.045936] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.045940] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.045978] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.046214] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.046543] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[ 0.051128] pci 0000:00:01.1: reg 20: [io 0xc0e0-0xc0ef]
[ 0.052990] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[ 0.057344] pci 0000:00:01.2: reg 20: [io 0xc080-0xc09f]
[ 0.059214] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[ 0.059495] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.059508] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.059621] pci 0000:00:02.0: [15ad:0405] type 0 class 0x000300
[ 0.062585] pci 0000:00:02.0: reg 10: [io 0xc0f0-0xc0ff]
[ 0.068027] pci 0000:00:02.0: reg 14: [mem 0xfd000000-0xfdffffff pref]
[ 0.076027] pci 0000:00:02.0: reg 18: [mem 0xfe000000-0xfe00ffff pref]
[ 0.102527] pci 0000:00:02.0: reg 30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.104075] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
[ 0.105861] pci 0000:00:03.0: reg 10: [io 0xc0a0-0xc0bf]
[ 0.107592] pci 0000:00:03.0: reg 14: [mem 0xfebe0000-0xfebe0fff]
[ 0.116016] pci 0000:00:03.0: reg 30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.116265] pci 0000:00:04.0: [dd01:0003] type 0 class 0x000480
[ 0.119578] pci 0000:00:04.0: reg 10: [mem 0xfebd0000-0xfebdffff 64bit]
[ 0.125571] pci 0000:00:05.0: [1af4:1001] type 0 class 0x000100
[ 0.127385] pci 0000:00:05.0: reg 10: [io 0xc000-0xc03f]
[ 0.128888] pci 0000:00:05.0: reg 14: [mem 0xfebe1000-0xfebe1fff]
[ 0.137953] pci 0000:00:06.0: [1af4:1002] type 0 class 0x0000ff
[ 0.138877] pci 0000:00:06.0: reg 10: [io 0xc0c0-0xc0df]
[ 0.144583] pci 0000:00:07.0: [1af4:1001] type 0 class 0x000100
[ 0.146350] pci 0000:00:07.0: reg 10: [io 0xc040-0xc07f]
[ 0.148020] pci 0000:00:07.0: reg 14: [mem 0xfebe2000-0xfebe2fff]
[ 0.157220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.157523] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.157538] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.157542] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.160199] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.160326] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.160391] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.160453] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.164067] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.164367] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.164367] vgaarb: loaded
[ 0.164367] vgaarb: bridge control possible 0000:00:02.0
[ 0.164367] i2c-core: driver [aat2870] using legacy suspend method
[ 0.164367] i2c-core: driver [aat2870] using legacy resume method
[ 0.164367] SCSI subsystem initialized
[ 0.176062] libata version 3.00 loaded.
[ 0.176128] usbcore: registered new interface driver usbfs
[ 0.176146] usbcore: registered new interface driver hub
[ 0.176192] usbcore: registered new device driver usb
[ 0.176291] PCI: Using ACPI for IRQ routing
[ 0.176300] PCI: pci_cache_line_size set to 64 bytes
[ 0.176478] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.176484] reserve RAM buffer: 000000005fffe000 - 000000005fffffff
[ 0.176586] NetLabel: Initializing
[ 0.176589] NetLabel: domain hash size = 128
[ 0.176592] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.176606] NetLabel: unlabeled traffic allowed by default
[ 0.176687] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.176703] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.176709] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.184109] Switching to clocksource kvm-clock
[ 0.190178] AppArmor: AppArmor Filesystem Enabled
[ 0.190214] pnp: PnP ACPI init
[ 0.190231] ACPI: bus type pnp registered
[ 0.190307] pnp 00:00: [bus 00-ff]
[ 0.190312] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.190314] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.190315] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.190317] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.190319] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.190368] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.190379] pnp 00:01: [io 0x0070-0x0071]
[ 0.190440] pnp 00:01: [irq 8]
[ 0.190441] pnp 00:01: [io 0x0072-0x0077]
[ 0.190464] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.190476] pnp 00:02: [io 0x0060]
[ 0.190477] pnp 00:02: [io 0x0064]
[ 0.190495] pnp 00:02: [irq 1]
[ 0.190513] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.190538] pnp 00:03: [irq 12]
[ 0.190559] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.190576] pnp 00:04: [io 0x03f2-0x03f5]
[ 0.190578] pnp 00:04: [io 0x03f7]
[ 0.190595] pnp 00:04: [irq 6]
[ 0.190597] pnp 00:04: [dma 2]
[ 0.190616] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.190660] pnp 00:05: [io 0x0378-0x037f]
[ 0.190678] pnp 00:05: [irq 7]
[ 0.190695] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.190719] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.190735] pnp 00:06: [irq 4]
[ 0.190753] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.190779] pnp 00:07: [io 0x02f8-0x02ff]
[ 0.190795] pnp 00:07: [irq 3]
[ 0.190814] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.190898] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.190920] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.191004] pnp: PnP ACPI: found 9 devices
[ 0.191008] ACPI: ACPI bus type pnp unregistered
[ 0.196982] PCI: max bus depth: 0 pci_try_num: 1
[ 0.196992] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.196994] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.196995] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.196997] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.197046] NET: Registered protocol family 2
[ 0.197150] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.197811] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.199962] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.200513] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.200522] TCP reno registered
[ 0.200549] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.200573] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.200695] NET: Registered protocol family 1
[ 0.200715] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.200755] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.200775] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.201203] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.201265] pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[ 0.201675] pci 0000:00:01.2: PCI INT D disabled
[ 0.201704] pci 0000:00:02.0: Boot video device
[ 0.201757] PCI: CLS 64 bytes, default 64
[ 0.202150] audit: initializing netlink socket (disabled)
[ 0.202164] type=2000 audit(1393713609.200:1): initialized
[ 0.221004] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.222621] VFS: Disk quotas dquot_6.5.2
[ 0.222677] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.223113] fuse init (API version 7.17)
[ 0.223188] msgmni has been set to 2963
[ 0.223457] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.223480] io scheduler noop registered
[ 0.223489] io scheduler deadline registered
[ 0.223516] io scheduler cfq registered (default)
[ 0.223599] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.223618] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.223735] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.223743] ACPI: Power Button [PWRF]
[ 0.224528] ERST: Table is not found!
[ 0.224533] GHES: HEST is not enabled!
[ 0.224719] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.224754] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
[ 0.225259] virtio-pci 0000:00:03.0: setting latency timer to 64
[ 0.225493] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.225501] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 0.226213] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 0.227135] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.227147] virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
[ 0.228057] virtio-pci 0000:00:06.0: setting latency timer to 64
[ 0.228192] virtio-pci 0000:00:07.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
[ 0.229185] virtio-pci 0000:00:07.0: setting latency timer to 64
[ 0.230346] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.252849] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.262728] Freeing initrd memory: 14312k freed
[ 0.820070] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.856283] Linux agpgart interface v0.103
[ 0.857425] brd: module loaded
[ 0.858061] loop: module loaded
[ 0.858294] virtio-pci 0000:00:05.0: irq 40 for MSI/MSI-X
[ 0.858311] virtio-pci 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.921098] vda: vda1 vda2 < vda5 >
[ 0.922611] virtio-pci 0000:00:07.0: irq 42 for MSI/MSI-X
[ 0.922630] virtio-pci 0000:00:07.0: irq 43 for MSI/MSI-X
[ 0.923259] vdb: vdb1
[ 0.924704] ata_piix 0000:00:01.1: version 2.13
[ 0.925960] ata_piix 0000:00:01.1: setting latency timer to 64
[ 0.926467] scsi0 : ata_piix
[ 0.926612] scsi1 : ata_piix
[ 0.926653] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14
[ 0.926657] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15
[ 0.926992] Fixed MDIO Bus: probed
[ 0.927008] tun: Universal TUN/TAP device driver, 1.6
[ 0.927011] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.927256] virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
[ 0.927272] virtio-pci 0000:00:03.0: irq 45 for MSI/MSI-X
[ 0.927295] virtio-pci 0000:00:03.0: irq 46 for MSI/MSI-X
[ 1.015033] PPP generic driver version 2.4.2
[ 1.015257] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.015277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.015288] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.015347] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[ 1.017066] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 1.017076] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 1.017278] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 1.017390] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
[ 1.017761] hub 1-0:1.0: USB hub found
[ 1.017770] hub 1-0:1.0: 2 ports detected
[ 1.017892] usbcore: registered new interface driver libusual
[ 1.017933] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.018769] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.018783] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.018921] mousedev: PS/2 mouse device common for all mice
[ 1.019148] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.019362] rtc_cmos 00:01: RTC can wake from S4
[ 1.019524] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.019691] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.019767] device-mapper: uevent: version 1.0.3
[ 1.019829] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.019838] cpuidle: using governor ladder
[ 1.019840] cpuidle: using governor menu
[ 1.019843] EFI Variables Facility v0.08 2004-May-17
[ 1.020061] TCP cubic registered
[ 1.020140] NET: Registered protocol family 10
[ 1.020649] NET: Registered protocol family 17
[ 1.020654] Registering the dns_resolver key type
[ 1.020776] registered taskstats version 1
[ 1.036767] Magic number: 6:522:703
[ 1.036939] rtc_cmos 00:01: setting system clock to 2014-03-01 22:40:09 UTC (1393713609)
[ 1.036971] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.036974] EDD information not available.
[ 1.081997] Freeing unused kernel memory: 924k freed
[ 1.082400] Write protecting the kernel read-only data: 12288k
[ 1.087228] Freeing unused kernel memory: 1580k freed
[ 1.091336] Freeing unused kernel memory: 1188k freed
[ 1.149867] udevd[88]: starting version 175
[ 1.187409] vesafb: mode is 1024x768x24, linelength=3072, pages=0
[ 1.187417] vesafb: scrolling: redraw
[ 1.187421] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.187814] vesafb: framebuffer at 0xfd000000, mapped to 0xffffc90000900000, using 2304k, total 2304k
[ 1.187927] Console: switching to colour frame buffer device 128x48
[ 1.193476] fb0: VESA VGA frame buffer device
[ 1.373053] FDC 0 is a S82078B
[ 1.561265] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.755049] Adding 1046524k swap on /dev/vda5. Priority:-1 extents:1 across:1046524k
[ 10.858896] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.033732] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[ 11.044775] udevd[352]: starting version 175
[ 11.998286] parport_pc 00:05: reported by Plug and Play ACPI
[ 12.174757] ppdev: user-space parallel port driver
[ 12.176483] lp: driver loaded but no devices found
[ 12.319674] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[ 12.412172] WARNING: You are using an experimental version of the media stack.
[ 12.412174] As the driver is backported to an older kernel, it doesn't offer
[ 12.412175] enough quality for its usage in production.
[ 12.412176] Use it with care.
[ 12.412177] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org
[ 12.412178] dfb9f94e8e5e7f73c8e2bcb7d4fb1de57e7c333d [media] stk1160: Build as a module if SND is m and audio support is selected
[ 12.412179] 9f1595245574a2dc1fb375df665e4d9fe336a9c4 [media] cx23885-video: fix two warnings
[ 12.412180] 5bc08e1921e46101457d3be09835697490177fdd [media] cx23885[v4]: Fix interrupt storm when enabling IR receiver
[ 12.412181] experimental: 09f9a9a2fc24022289536b89b1ea2bde537363d5 experimental: Add missing file experimental/oe/get_dvb_firmware
[ 12.412182] v4l-dvb-saa716x: 0dab24906ff057b72537b01605bdf06c4dbb1c62 saa716x: i2c_del_adapter() fix
[ 12.634045] Digital Devices PCIE bridge driver 0.9.9, Copyright (C) 2010-13 Digital Devices GmbH
[ 12.634707] ddbridge 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[ 12.634775] DDBridge driver detected: Digital Devices DVBCT V6.1 DVB adapter
[ 12.634813] HW 0001000d REGMAP 00010004
[ 12.637867] Port 0 (TAB 1): DUAL DVB-C/T
[ 12.639599] Port 1 (TAB 2): NO MODULE
[ 12.641330] Port 2 (TAB 3): NO MODULE
[ 12.642085] DVB: registering new adapter (DDBridge)
[ 12.642090] DVB: registering new adapter (DDBridge)
[ 12.707383] [drm] Initialized drm 1.1.0 20060810
[ 12.717552] EXT4-fs (vdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 12.982250] stv0367 found
[ 13.320955] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 13.662290] tda18212dd: i2c_read error
[ 13.662887] tda18212dd: ChipID 4724
[ 13.663381] tda18212dd: PowerState 02
[ 13.707578] RPC: Registered named UNIX socket transport module.
[ 13.707581] RPC: Registered udp transport module.
[ 13.707583] RPC: Registered tcp transport module.
[ 13.707584] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.904364] FS-Cache: Loaded
[ 13.945558] ddbridge 0000:00:04.0: DVB: registering adapter 0 frontend 0 (STV0367 DVB-C DVB-T)...
[ 13.947654] stv0367 found
[ 14.036994] FS-Cache: Netfs 'nfs' registered for caching
[ 14.075960] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.335896] tda18212dd: ChipID 4724
[ 14.336395] tda18212dd: PowerState 02
[ 14.564846] ddbridge 0000:00:04.0: DVB: registering adapter 1 frontend 0 (STV0367 DVB-C DVB-T)...
[ 14.567503] [drm] Capabilities:
[ 14.567506] [drm] Rect copy.
[ 14.567507] [drm] Cursor.
[ 14.567508] [drm] Cursor bypass.
[ 14.567509] [drm] Cursor bypass 2.
[ 14.567511] [drm] VRAM at 0xfd000000 size is 16384 kiB
[ 14.567512] [drm] MMIO at 0xfe000000 size is 64 kiB
[ 14.567515] [drm] global init.
[ 14.589424] [TTM] Zone kernel: Available graphics memory: 767732 kiB.
[ 14.589428] [TTM] Initializing pool allocator.
[ 14.589603] [drm:vmw_driver_load] *ERROR* Hardware has no pitchlock
[ 14.589718] [TTM] Finalizing pool allocator.
[ 14.589747] [TTM] Zone kernel: Used memory at exit: 0 kiB.
[ 14.591617] vmwgfx: probe of 0000:00:02.0 failed with error -38
[ 14.826345] init: failsafe main process (774) killed by TERM signal
[ 15.922960] nvidia: module license 'NVIDIA' taints kernel.
[ 15.922964] Disabling lock debugging due to kernel taint
[ 16.026642] NVRM: No NVIDIA graphics adapter found!
[ 16.232275] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[ 16.610975] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 16.647877] NFSD: starting 90-second grace period
[ 17.745150] init: plymouth-stop pre-start process (1397) terminated with status 1
[ 18.505293] init: wait-for-job-state (vdr-frontendvdr) main process (1299) killed by TERM signal
[ 23.200075] eth0: no IPv6 routers present
[ 965.092086] sched: RT throttling activated
[74008.932393] init: vdr main process (991) terminated with status 1

lspci -v:

Display Spoiler

root@VDRServ001:/var/log# lspci -v
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
Subsystem: Red Hat, Inc Qemu virtual machine
Flags: fast devsel

00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
Subsystem: Red Hat, Inc Qemu virtual machine
Flags: medium devsel

00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] (prog-if 80 [Master])
Subsystem: Red Hat, Inc Qemu virtual machine
Flags: bus master, medium devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[virtual] Memory at 00000170 (32-bit, non-prefetchable)
[virtual] Memory at 00000370 (type 3, non-prefetchable)
I/O ports at c0e0
Kernel driver in use: ata_piix

00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01) (prog-if 00 [UHCI])
Subsystem: Red Hat, Inc Qemu virtual machine
Flags: bus master, fast devsel, latency 0, IRQ 11
I/O ports at c080
Kernel driver in use: uhci_hcd

00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
Subsystem: Red Hat, Inc Qemu virtual machine
Flags: medium devsel, IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4

00:02.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00 [VGA controller])
Subsystem: VMware SVGA II Adapter
Flags: fast devsel
I/O ports at c0f0
Memory at fd000000 (32-bit, prefetchable)
Memory at fe000000 (32-bit, prefetchable)
Expansion ROM at febc0000 [disabled]
Kernel modules: vmwgfx

00:03.0 Ethernet controller: Red Hat, Inc Virtio network device
Subsystem: Red Hat, Inc Device 0001
Flags: bus master, fast devsel, latency 0, IRQ 10
I/O ports at c0a0
Memory at febe0000 (32-bit, non-prefetchable)
Expansion ROM at feb80000 [disabled]
Capabilities: [40] MSI-X: Enable+ Count=3 Masked-
Kernel driver in use: virtio-pci

00:04.0 Multimedia controller: Digital Devices GmbH Octopus DVB Adapter
Subsystem: Digital Devices GmbH Cine CT V6.1 DVB adapter
Flags: fast devsel, IRQ 11
Memory at febd0000 (64-bit, non-prefetchable)
Capabilities: [90] Express Endpoint, MSI 00
Capabilities: [50] Power Management version 3
Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit-
Capabilities: [100] #dd01
Kernel driver in use: ddbridge
Kernel modules: ddbridge

00:05.0 SCSI storage controller: Red Hat, Inc Virtio block device
Subsystem: Red Hat, Inc Device 0002
Flags: bus master, fast devsel, latency 0, IRQ 10
I/O ports at c000
Memory at febe1000 (32-bit, non-prefetchable)
Capabilities: [40] MSI-X: Enable+ Count=2 Masked-
Kernel driver in use: virtio-pci

00:06.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon
Subsystem: Red Hat, Inc Device 0005
Flags: bus master, fast devsel, latency 0, IRQ 11
I/O ports at c0c0
Kernel driver in use: virtio-pci

00:07.0 SCSI storage controller: Red Hat, Inc Virtio block device
Subsystem: Red Hat, Inc Device 0002
Flags: bus master, fast devsel, latency 0, IRQ 10
I/O ports at c040
Memory at febe2000 (32-bit, non-prefetchable)
Capabilities: [40] MSI-X: Enable+ Count=2 Masked-
Kernel driver in use: virtio-pci

Posts by Diggo

Welches Plugin

Welches Plugin

[ANNOUNCE] yaVDR 0.6.1

[VDR4Arch] Kein digitaldevices-dvb-driver mehr (Paket enthält nix)

XVDR processRecStream_Open - unable to start recording

Jetson TK1

VDR4Arch Frage bezügl. Systemd

VDR4Arch Frage bezügl. Systemd

Emergency Exit bei Aufnahmen / CineCT Problem?

VDR4Arch Frage bezügl. Systemd

Emergency Exit bei Aufnahmen / CineCT Problem?

Emergency Exit bei Aufnahmen / CineCT Problem?

DDBRIDGE - versuch aktuellen S2 Treiber zu bauen (bei make menuconfig)

Emergency Exit bei Aufnahmen / CineCT Problem?

[VMWare] Server mit 4 Tuner (CineS2 V6.2) macht Probleme

Emergency Exit bei Aufnahmen / CineCT Problem?

Emergency Exit bei Aufnahmen / CineCT Problem?

Emergency Exit bei Aufnahmen / CineCT Problem?

Emergency Exit bei Aufnahmen / CineCT Problem?

Emergency Exit bei Aufnahmen / CineCT Problem?