Posts by Rennsemmel
-
-
diseqc.conf
# DiSEqC configuration for VDR
#
# Format:
#
# satellite slof polarization lof command...
#
# satellite: one of the 'S' codes defined in sources.conf
# slof: switch frequency of LNB; the first entry with
# an slof greater than the actual transponder
# frequency will be used
# polarization: V = vertical, H = horizontal, L = Left circular, R = Right circular
# lof: the local oscillator frequency to subtract from
# the actual transponder frequency
# command:
# t tone off
# T tone on
# v voltage low (13V)
# V voltage high (18V)
# A mini A
# B mini B
# Un unicable code sequence for bank n follows
# Wnn wait nn milliseconds (nn may be any positive integer number)
# [xx ...] hex code sequence (max. 6)
#
# The 'command...' part is optional.
#
# A line containing space separated integer numbers, terminated with a ':',
# defines that any following DiSEqC sequences apply only to the given list
# of device numbers.
#
# Examples:# Full DiSEqC sequence:
S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t
S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W15 A W15 T
S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W15 A W15 t
S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W15 A W15 TS13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 B W15 t
S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W15 B W15 T
S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W15 B W15 t
S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W15 B W15 T -
Guten abend
Auszug aus der channels.conf und ja ich habe einen Multischalter aber nur Astra 19.2E der Umbau/erweiterung auf 13E kommt erst noch
hab noch in keinen VDR oder Dreambox diseqc gebraucht
aber scan sollte doch gehen oder wenn w_scan nicht geht??Code
Display More:->Favoriten Das Erste;ARD:11837:HC34M2O0S0:S19.2E:27500:101=2:102=deu@3,103=mis@3;106=deu@106:104:0:28106:1:1101:0 Das Erste HD;ARD:11362:HC23M5O35S1:S19.2E:22000:6010=27:6020=deu@3,6021=mis@3;6022=deu@106:6030:0:11100:1:1011:0 ZDF;ZDFvision:11954:HC34M2O0S0:S19.2E:27500:110=2:120=deu@3,121=mis@3;125=deu@106:130:0:28006:1:1079:0 ZDF HD;ZDFvision:11362:HC23M5O35S1:S19.2E:22000:6110=27:6120=deu@3,6121=mis@3,6123=qaa@3;6122=deu@106:6130:0:11110:1:1011:0 Bayerisches FS Süd;ARD:11836:HC34M2O0S0:S19.2E:27500:201=2:202=deu@3,203=mis@3;206=deu@106:204:0:28107:1:1101:0 RTL Television,RTL;RTL World:12187:HC34M2O0S0:S19.2E:27500:163=2:104=deu@3;106=deu@106:105:0:12003:1:1089:0 RTL HD;CBC:10832:HC23M5O35S1:S19.2E:22000:255=27:0;259=deu@106:32:1830,1843,9C4:61200:1:1057:0 SAT.1;ProSiebenSat.1:12544:HC56M2O0S0:S19.2E:22000:255=2:256=deu@3;259=deu@106:32:0:17500:1:1107:0 SAT.1 HD;ProSiebenSat.1:11464:HC23M5O35S1:S19.2E:22000:255=27:0;259=deu@106:32:1830,1843,9C4:61300:1:1017:0 RTL2;RTL World:12187:HC34M2O0S0:S19.2E:27500:166=2:128=deu@3:68:0:12020:1:1089:0 RTL2 HD;BetaDigital:10832:HC23M5O35S1:S19.2E:22000:1535=27:0;1539=deu@106:37:1830,1843,9C4:61205:1:1057:0 ProSieben;ProSiebenSat.1:12544:HC56M2O0S0:S19.2E:22000:511=2:512=deu@3;515=deu@106:33:0:17501:1:1107:0 ProSieben HD;ProSiebenSat.1:11464:HC23M5O35S1:S19.2E:22000:511=27:0;515=deu@106:33:1830,1843,9C4:61301:1:1017:0 kabel eins;ProSiebenSat.1:12544:HC56M2O0S0:S19.2E:22000:767=2:768=deu@3:34:0:17502:1:1107:0 kabel eins HD;ProSiebenSat.1:11464:HC23M5O35S1:S19.2E:22000:767=27:0;771=deu@106:34:1830,1843,9C4:61302:1:1017:0 Super RTL,S RTL;RTL World:12186:HC34M2O0S0:S19.2E:27500:165=2:120=deu@3:65:0:12040:1:1089:0 VOX;RTL World:12188:HC34M2O0S0:S19.2E:27500:167=2:136=deu@3:71:0:12060:1:1089:0 VOX HD;CBC:10832:HC23M5O35S1:S19.2E:22000:511=27:0;515=deu@106:33:1830,1843,9C4:61201:1:1057:0 TELE 5;BetaDigital:12479:VC34M2O0S0:S19.2E:27500:1535=2:1536=deu@3:38:0:51:133:33:0 DAS VIERTE,D VIERTE;BetaDigital:12460:HC34M2O0S0:S19.2E:27500:2047=2:2048=deu@3;2051=deu@106:36:0:1793:133:5:0 KiKa;ZDFvision:11953:HC34M2O0S0:S19.2E:27500:310=2:320=deu@3:330:0:28008:1:1079:0 NICK/COMEDY;MTV Networks Europe:11972:VC34M2O0S0:S19.2E:27500:4101+8190=2:4102=deu@4:4104:0:28680:1:1078:0 DMAX;BetaDigital:12246:VC34M2O0S0:S19.2E:27500:511=2:512=deu@4:32:0:10101:1:1092:0 ONTV Regional,ONTV;BetaDigital:12246:VC34M2O0S0:S19.2E:27500:1023=2:1024=deu@4:0:0:10103:1:1092:0 SIXX;ProSiebenSat.1:12460:HC34M2O0S0:S19.2E:27500:767=2:768=deu@3:35:0:776:133:5:0 SIXX HD;ProSiebenSat.1:11464:HC23M5O35S1:S19.2E:22000:1023=27:0;1027=deu@106:35:1830,1843,9C4:61303:1:1017:0 zdf_neo;ZDFvision:11954:HC34M2O0S0:S19.2E:27500:660=2:670=deu@3,671=mis@3:680:0:28014:1:1079:0 ServusTV Deutschland;ServusTV:12663:HC56M2O0S0:S19.2E:22000:1110=2:1111=deu@4,1112=deu@4:1115:0:13110:1:1115:0 Servus TV HD Deutschland;Servus TV:11303:HC23M5O35S1:S19.2E:22000:4920=27:4921=deu@4,4922=eng@4;4923=deu@106:4925:0:4914:1:1007:0 ANIXE SD;BetaDigital:12459:HC34M2O0S0:S19.2E:27500:3311=2:3312=deu@3:0:0:764:133:5:0 ANIXE HD;BetaDigital:10773:HC34M5O20S1:S19.2E:22000:255=27:0;259=deu@106:0:0:21100:1:1053:0 arte HD;ZDFvision:11361:HC23M5O35S1:S19.2E:22000:6210=27:6221=deu@3,6222=fra@3;6220=deu@106:6230:0:11120:1:1011:0 MTV Germany;MTV Networks Europe:11973:VC34M2O0S0:S19.2E:27500:4031+8190=2:4032=deu@4:4034:D00,1702,1833,9C4:28673:1:1078:0 VIVA Germany;MTV Networks Europe:11973:VC34M2O0S0:S19.2E:27500:4061+8190=2:4062=@4:4064:0:28676:1:1078:0 DELUXE MUSIC,DELUXE;BetaDigital:12246:VC34M2O0S0:S19.2E:27500:255=2:256=deu@4;259=deu@106:0:0:10100:1:1092:0 GoTV;GoTV:12663:HC56M2O0S0:S19.2E:22000:1020=2:1021=deu@3:179:0:13102:1:1115:0 n-tv;RTL World:12186:HC34M2O0S0:S19.2E:27500:169=2:73=deu@3:80:0:12090:1:1089:0 N24;ProSiebenSat.1:12544:HC56M2O0S0:S19.2E:22000:1023=2:1024=deu@3:35:0:17503:1:1107:0
LG
Oliver -
also hab jetzt den vdr mit allen plugins (waren ja nur 2) purged
alle verzeichnisse die noch da waren gelöschtalso die dkms sind aktuell
Code
Display Moreaptitude show s2-liplianin-dkms Paket: s2-liplianin-dkms Neu: ja Zustand: Installiert Automatisch installiert: nein Version: 0~20110723.15660~natty Priorität: optional Bereich: misc Verwalter: Steffen Barszus <steffenbpunkt@gmail.com> Unkomprimierte Größe: 32,3 M Hängt ab von: dkms (>= 1.95), libproc-processtable-perl Kollidiert mit: v4l-dvb-dkms Ersetzt: v4l-dvb-dkms Beschreibung: s2-liplianin driver in DKMS format.
Code
Display Moredmesg | grep -i dvb [ 12.792288] dvb-usb: found a 'TeVii S660 USB' in warm state. [ 12.792404] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 12.840545] DVB: registering new adapter (TeVii S660 USB) [ 13.356107] dvb-usb: MAC address: 00:18:bd:5b:54:52 [ 13.397330] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)... [ 13.399460] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.0/0000:05:00.1/usb3/3-1/input/input5 [ 13.399704] dvb-usb: schedule remote query interval to 150 msecs. [ 13.399709] dvb-usb: TeVii S660 USB successfully initialized and connected. [ 13.402669] dvb-usb: found a 'TeVii S660 USB' in warm state. [ 13.403503] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 13.451651] DVB: registering new adapter (TeVii S660 USB) [ 13.714468] dvb-usb: MAC address: 00:18:bd:5b:54:53 [ 13.720719] DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)... [ 13.722966] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.0/0000:05:00.3/usb4/4-1/input/input6 [ 13.723204] dvb-usb: schedule remote query interval to 150 msecs. [ 13.723210] dvb-usb: TeVii S660 USB successfully initialized and connected.
w_scan und die dvbapps installiert
Astra-19.2E Datei für scan angelegt
Code
Display Morescan -v Astra-19.2E scanning Astra-19.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12551500 V 22000000 5 >>> tune to: 12551:v:0:22000 DiSEqC: switch pos 0, 13V, hiband (index 2) DVB-S IF freq is 1951500 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING: >>> tuning failed!!! >>> tune to: 12551:v:0:22000 (tuning failed) DiSEqC: switch pos 0, 13V, hiband (index 2) DVB-S IF freq is 1951500 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done.
Code
Display Morew_scan -v -t3 -fs -s S19E2 -o 7 w_scan version 20101001 (compiled for DVB API 5.2) using settings for 19.2 east Astra 1F/1G/1H/1KR/1L frontend_type DVB-S, channellist 6 output format vdr-1.7 Info: using DVB adapter auto detection. /dev/dvb/adapter0/frontend0 -> DVB-S "Montage Technology DS3000/TS2020": very good :-)) Using DVB-S frontend (adapter /dev/dvb/adapter0/frontend0) -_-_-_-_ Getting frontend capabilities-_-_-_-_ Using DVB API 5.2 frontend Montage Technology DS3000/TS2020 supports INVERSION_AUTO DVB-S DVB-S2 using LNB "UNIVERSAL" -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ (time: 00:00) DiSEqC: uncommitted switch pos 0 DiSEqC: switch pos 0, 18V, loband (index 1) set_frontend: using DVB API 5.2 (time: 00:04) DiSEqC: uncommitted switch pos 0 DiSEqC: switch pos 0, 13V, loband (index 0) set_frontend: using DVB API 5.2 (time: 00:07) DiSEqC: uncommitted switch pos 0 DiSEqC: switch pos 0, 18V, loband (index 1) set_frontend: using DVB API 5.2 (time: 00:10) DiSEqC: uncommitted switch pos 0 DiSEqC: switch pos 0, 13V, loband (index 0) set_frontend: using DVB API 5.2 (time: 00:13) DiSEqC: uncommitted switch pos 0 DiSEqC: switch pos 0, 18V, loband (index 1) set_frontend: using DVB API 5.2 (time: 00:16) DiSEqC: uncommitted switch pos 0 DiSEqC: switch pos 0, 13V, loband (index 0) set_frontend: using DVB API 5.2 (time: 00:19) DiSEqC: uncommitted switch pos 0 DiSEqC: switch pos 0, 18V, loband (index 1) set_frontend: using DVB API 5.2 (time: 00:22) DiSEqC: uncommitted switch pos 0 DiSEqC: switch pos 0, 13V, loband (index 0) set_frontend: using DVB API 5.2 (time: 00:25) DiSEqC: uncommitted switch pos 0 DiSEqC: switch pos 0, 18V, loband (index 1) set_frontend: using DVB API 5.2 ^C ERROR: interrupted by SIGINT, dumping partial result... dumping lists (0 services) Done.
wenn ich dann heute abend zuhause bin werd ich mal die Karte in nen andren slot stecken sollte es dann auch nicht gehen
werde ich zum test die hauppauge hvr-4000 einbauen und die tevii in meinen win 7 ob sie da gehtlg
oliver -
Hallo steffen
-rw-r--r-- 1 root root 132 2011-07-28 23:26 yavdr-stable-vdr-natty.list
-rw-r--r-- 1 root root 132 2011-07-28 23:26 yavdr-stable-vdr-natty.list.save
-rw-r--r-- 1 root root 134 2011-07-28 23:26 yavdr-testing-vdr-natty.list
-rw-r--r-- 1 root root 134 2011-07-28 23:26 yavdr-testing-vdr-natty.list.save
-rw-r--r-- 1 root root 136 2011-07-28 23:26 yavdr-unstable-vdr-natty.list
-rw-r--r-- 1 root root 136 2011-07-28 23:26 yavdr-unstable-vdr-natty.list.savediese habe ich jetzt gelöscht auch das von surkov
und in der source.list
habe ich folgenden eintrag gemacht
deb http://ppa.launchpad.net/yavdr/main/ubuntu natty main
deb-src http://ppa.launchpad.net/yavdr/main/ubuntu natty mainjetzt läuft gerade ein apt-get upgrade
und das dkms paket wird upgedated
nach nem rebbot werde ich weiter testen und berichten
lg
oliverist aktiv
-
-
dpkg -i s2-liplianin-dkms_0~20110619.15390.3_all.deb
Vormals abgewähltes Paket s2-liplianin-dkms wird gewählt.
(Lese Datenbank ... 127783 Dateien und Verzeichnisse sind derzeit installiert.)
Entpacken von s2-liplianin-dkms (aus s2-liplianin-dkms_0~20110619.15390.3_all.deb) ...
s2-liplianin-dkms (0~20110619.15390.3) wird eingerichtet ...
Loading new s2-liplianin-0~20110619.15390.3 DKMS files...Loading tarball for module: s2-liplianin / version: 0~20110619.15390.3
Creating /var/lib/dkms/s2-liplianin/0~20110619.15390.3/source
Copying dkms.conf to /var/lib/dkms/s2-liplianin/0~20110619.15390.3/source...
Loading /var/lib/dkms/s2-liplianin/0~20110619.15390.3/2.6.32-32-generic/i686...DKMS: ldtarball Completed.
First Installation: checking all kernels...
Building only for 2.6.38-10-generic
Building for architecture x86_64
Building initial module for 2.6.38-10-genericError! Bad return status for module build on kernel: 2.6.38-10-generic (x86_64)
Consult the make.log in the build directory
/var/lib/dkms/s2-liplianin/0~20110619.15390.3/build/ for more information. -
Hallo Hepi
jetzt habe ich den vdr 1.7.18 yavdr 7 aus dem unstable yavdr repo und habe das gleiche problem.
vdr -V
vdr (1.7.18/1.7.18) - The Video Disk Recorder
vnsiserver (0.9.0) - VDR-Network-Streaming-Interface (VNSI) Server
streamdev-server (0.5.1-git) - VDR Streaming ServerCode
Display Moreaptitude show vdr Paket: vdr Neu: ja Zustand: Installiert Automatisch installiert: nein Version: 1.7.18-11yavdr7~natty Priorität: extra Bereich: video Verwalter: Debian VDR Team <pkg-vdr-dvb-devel@lists.alioth.debian.org> Unkomprimierte Größe: 3.076 k Hängt ab von: libc6 (>= 2.8), libcap2 (>= 2.10), libfontconfig1 (>= 2.8.0), libfreetype6 (>= 2.2.1), libfribidi0 (>= 0.19.2), libgcc1 (>= 1:4.1.1), libjpeg62 (>= 6b1), libstdc++6 (>= 4.1.1), adduser, psmisc Empfiehlt: lirc, ttf-bitstream-vera | ttf-freefont Schlägt vor: vdr-plugin-dvbsddevice Kollidiert mit: vdr-daemon, vdr-kbd, vdr-lirc, vdr-rcu, vdradmin (< 3.4.3) Liefert: vdr-abi-1.7.18-yavdr2 Beschreibung: Video Disk Recorder for DVB cards Video Disk Recorder (VDR) is a digital sat-receiver program using Linux and DVB technologies. It allows one to record MPEG2 streams, as well as output the stream to TV. It is also possible to watch DVDs (hardware accelerated) with some comfort and use an IR remote control. This package contains the VDR main program which is controlled via the PC keyboard or a IR remote control. NOTE: You should install compatible DVB drivers before using these programs. Also the standard VDR (without special plugins) requires a DVB-Card with an integrated mpeg-decoder, a so called Full-Featured Card
Code
Display Moretail -n 300 /var/log/syslog | grep -i vdr Jul 28 20:54:55 ubuntu vdr: [1705] cTimeMs: using monotonic clock (resolution is 1 ns) Jul 28 20:54:55 ubuntu vdr: [1721] cTimeMs: using monotonic clock (resolution is 1 ns) Jul 28 20:54:55 ubuntu vdr: [1724] cTimeMs: using monotonic clock (resolution is 1 ns) Jul 28 20:54:55 ubuntu vdr: [1776] cTimeMs: using monotonic clock (resolution is 1 ns) Jul 28 20:54:55 ubuntu vdr: [1776] VDR version 1.7.18 started Jul 28 20:54:55 ubuntu vdr: [1776] switched to user 'vdr' Jul 28 20:54:55 ubuntu vdr: [1776] codeset is 'UTF-8' - known Jul 28 20:54:56 ubuntu vdr: [1776] found 28 locales in /usr/share/locale Jul 28 20:54:56 ubuntu vdr: [1776] no locale for language code 'por' Jul 28 20:54:56 ubuntu vdr: [1776] loading plugin: /usr/lib/vdr/plugins/libvdr-vnsiserver.so.1.7.18 Jul 28 20:54:56 ubuntu vdr: [1776] loading plugin: /usr/lib/vdr/plugins/libvdr-streamdev-server.so.1.7.18 Jul 28 20:54:56 ubuntu vdr: [1776] loading /var/lib/vdr/setup.conf Jul 28 20:54:56 ubuntu vdr: [1776] loading /var/lib/vdr/sources.conf Jul 28 20:54:56 ubuntu vdr: [1776] loading /var/lib/vdr/diseqc.conf Jul 28 20:54:56 ubuntu vdr: [1776] loading /var/lib/vdr/channels.conf Jul 28 20:54:56 ubuntu vdr: [1776] loading /var/lib/vdr/timers.conf Jul 28 20:54:56 ubuntu vdr: [1776] loading /var/lib/vdr/commands.conf Jul 28 20:54:56 ubuntu vdr: [1776] loading /var/lib/vdr/reccmds.conf Jul 28 20:54:56 ubuntu vdr: [1776] loading /var/lib/vdr/svdrphosts.conf Jul 28 20:54:56 ubuntu vdr: [1776] loading /var/lib/vdr/keymacros.conf Jul 28 20:54:56 ubuntu vdr: [1885] video directory scanner thread started (pid=1776, tid=1885) Jul 28 20:54:56 ubuntu vdr: [1776] reading EPG data from /var/cache/vdr/epg.data Jul 28 20:54:56 ubuntu vdr: [1776] registered source parameters for 'A - ATSC' Jul 28 20:54:56 ubuntu vdr: [1776] registered source parameters for 'C - DVB-C' Jul 28 20:54:56 ubuntu vdr: [1776] registered source parameters for 'S - DVB-S' Jul 28 20:54:56 ubuntu vdr: [1776] registered source parameters for 'T - DVB-T' Jul 28 20:54:56 ubuntu vdr: [1776] probing /dev/dvb/adapter0/frontend0 Jul 28 20:54:56 ubuntu vdr: [1776] creating cDvbDevice Jul 28 20:54:56 ubuntu vdr: [1776] new device number 1 Jul 28 20:54:56 ubuntu vdr: [1886] video directory scanner thread started (pid=1776, tid=1886) Jul 28 20:54:56 ubuntu vdr: [1885] video directory scanner thread ended (pid=1776, tid=1885) Jul 28 20:54:56 ubuntu vdr: [1886] video directory scanner thread ended (pid=1776, tid=1886) Jul 28 20:54:56 ubuntu vdr: [1776] frontend 0/0 provides DVB-S2 with QPSK ("Montage Technology DS3000/TS2020") Jul 28 20:54:56 ubuntu vdr: [1776] LNB-sharing: patch version 0.1.4 Jul 28 20:54:56 ubuntu vdr: [1776] LNB-sharing: setting device 1 to use LNB 1 Jul 28 20:54:56 ubuntu vdr: [1776] Device 1: will send signals (like 22kHz) to LNB nr. = 1 Jul 28 20:54:56 ubuntu vdr: [1888] tuner on frontend 0/0 thread started (pid=1776, tid=1888) Jul 28 20:54:56 ubuntu vdr: [1776] probing /dev/dvb/adapter1/frontend0 Jul 28 20:54:56 ubuntu vdr: [1776] creating cDvbDevice Jul 28 20:54:56 ubuntu vdr: [1776] new device number 2 Jul 28 20:54:56 ubuntu vdr: [1889] section handler thread started (pid=1776, tid=1889) Jul 28 20:54:56 ubuntu vdr: [1776] frontend 1/0 provides DVB-S2 with QPSK ("Montage Technology DS3000/TS2020") Jul 28 20:54:56 ubuntu vdr: [1776] LNB-sharing: patch version 0.1.4 Jul 28 20:54:56 ubuntu vdr: [1776] LNB-sharing: setting device 2 to use LNB 2 Jul 28 20:54:56 ubuntu vdr: [1776] Device 2: will send signals (like 22kHz) to LNB nr. = 2 Jul 28 20:54:57 ubuntu vdr: [1891] tuner on frontend 1/0 thread started (pid=1776, tid=1891) Jul 28 20:54:57 ubuntu vdr: [1776] found 2 DVB devices Jul 28 20:54:57 ubuntu vdr: [1776] initializing plugin: vnsiserver (0.9.0): VDR-Network-Streaming-Interface (VNSI) Server Jul 28 20:54:57 ubuntu vdr: [1892] section handler thread started (pid=1776, tid=1892) Jul 28 20:54:57 ubuntu vdr: [1776] initializing plugin: streamdev-server (0.5.1-git): VDR Streaming Server Jul 28 20:54:57 ubuntu vdr: [1776] setting primary device to 1 Jul 28 20:54:57 ubuntu vdr: [1776] device 1 has no MPEG decoder Jul 28 20:54:57 ubuntu vdr: [1776] assuming manual start of VDR Jul 28 20:54:57 ubuntu vdr: [1776] SVDRP listening on port 2001 Jul 28 20:54:57 ubuntu vdr: [1776] setting current skin to "sttng" Jul 28 20:54:57 ubuntu vdr: [1776] loading /var/lib/vdr/themes/sttng-default.theme Jul 28 20:54:57 ubuntu vdr: [1776] starting plugin: vnsiserver Jul 28 20:54:57 ubuntu vdr: [1776] VNSI: VNSI Server started Jul 28 20:54:57 ubuntu vdr: [1776] VNSI: Channel streaming timeout: 10 seconds Jul 28 20:54:57 ubuntu vdr: [1776] starting plugin: streamdev-server Jul 28 20:54:57 ubuntu vdr: [1776] loading /var/lib/vdr/plugins/streamdev-server/streamdevhosts.conf Jul 28 20:54:57 ubuntu vdr: [1893] VDR VNSI Server thread started (pid=1776, tid=1893) Jul 28 20:54:57 ubuntu vdr: [1894] streamdev server thread started (pid=1776, tid=1894) Jul 28 20:54:57 ubuntu vdr: [1894] Streamdev: Listening (VTP) on port 2004 Jul 28 20:54:57 ubuntu vdr: [1894] Streamdev: Listening (HTTP) on port 3000 Jul 28 20:54:57 ubuntu vdr: [1776] ERROR: /dev/lircd: Datei oder Verzeichnis nicht gefunden Jul 28 20:54:57 ubuntu vdr: [1776] ERROR: remote control LIRC not ready! Jul 28 20:54:57 ubuntu vdr: [1776] switching to channel 1 Jul 28 20:54:57 ubuntu vdr: [1776] setting watchdog timer to 60 seconds Jul 28 20:54:57 ubuntu vdr: [1776] OSD size changed to 720x480 @ 1 Jul 28 20:54:57 ubuntu vdr: [1776] ERROR: no OSD provider available - using dummy OSD! Jul 28 20:54:57 ubuntu vdr: [1776] max. latency time 1 seconds Jul 28 20:55:05 ubuntu vdr: [1888] frontend 0/0 timed out while tuning to channel 1, tp 111837 Jul 28 20:56:05 ubuntu vdr: [1888] frontend 0/0 timed out while tuning to channel 175, tp 110744 Jul 28 20:56:05 ubuntu vdr: [1891] frontend 1/0 timed out while tuning to channel 31, tp 110773 Jul 28 20:56:26 ubuntu vdr: [1891] frontend 1/0 timed out while tuning to channel 591, tp 110861 Jul 28 20:56:26 ubuntu vdr: [1888] frontend 0/0 timed out while tuning to channel 7, tp 110832 Jul 28 20:56:35 ubuntu vdr: [2169] cTimeMs: using monotonic clock (resolution is 1 ns) Jul 28 20:56:47 ubuntu vdr: [1891] frontend 1/0 timed out while tuning to channel 600, tp 111023 Jul 28 20:56:47 ubuntu vdr: [1888] frontend 0/0 timed out while tuning to channel 1147, tp 110920 Jul 28 20:57:08 ubuntu vdr: [1891] frontend 1/0 timed out while tuning to channel 29, tp 111303 Jul 28 20:57:08 ubuntu vdr: [1888] frontend 0/0 timed out while tuning to channel 1158, tp 111170 Jul 28 20:57:29 ubuntu vdr: [1888] frontend 0/0 timed out while tuning to channel 2, tp 111362 Jul 28 20:57:29 ubuntu vdr: [1891] frontend 1/0 timed out while tuning to channel 9, tp 111464 Jul 28 20:57:50 ubuntu vdr: [1891] frontend 1/0 timed out while tuning to channel 60, tp 111758 Jul 28 20:57:50 ubuntu vdr: [1888] frontend 0/0 timed out while tuning to channel 53, tp 111718 Jul 28 20:58:11 ubuntu vdr: [1891] frontend 1/0 timed out while tuning to channel 1, tp 111837 Jul 28 20:58:11 ubuntu vdr: [1888] frontend 0/0 timed out while tuning to channel 49, tp 111796 Jul 28 20:58:32 ubuntu vdr: [1891] frontend 1/0 timed out while tuning to channel 50, tp 111915 Jul 28 20:58:32 ubuntu vdr: [1888] frontend 0/0 timed out while tuning to channel 63, tp 111876 Jul 28 20:58:53 ubuntu vdr: [1891] frontend 1/0 timed out while tuning to channel 62, tp 111992 Jul 28 20:58:53 ubuntu vdr: [1888] frontend 0/0 timed out while tuning to channel 3, tp 111954 Jul 28 20:59:14 ubuntu vdr: [1891] frontend 1/0 timed out while tuning to channel 67, tp 112070 Jul 28 20:59:14 ubuntu vdr: [1888] frontend 0/0 timed out while tuning to channel 79, tp 112031 Jul 28 20:59:35 ubuntu vdr: [1894] Streamdev: Accepted new client (HTTP) 192.168.1.10:58659 Jul 28 20:59:35 ubuntu vdr: [2226] receiver on device 2 thread started (pid=1776, tid=2226) Jul 28 20:59:35 ubuntu vdr: [2225] streamdev-livestreaming thread started (pid=1776, tid=2225) Jul 28 20:59:35 ubuntu vdr: [2224] streamdev-writer thread started (pid=1776, tid=2224) Jul 28 20:59:35 ubuntu vdr: [2227] TS buffer on device 2 thread started (pid=1776, tid=2227) Jul 28 20:59:35 ubuntu vdr: [1888] frontend 0/0 timed out while tuning to channel 203, tp 112109 Jul 28 20:59:44 ubuntu vdr: [1891] frontend 1/0 timed out while tuning to channel 1, tp 111837
-
-
Hallo zusammen
ich brauch mal bitte eure Hilfe da ich an einem Punkt bin wo mein Hirn blockiert
Ich habe meinen Server (File,Proxy und VDR) mit Ubuntu Natty x64 Kernel 2.6.38-10 neu Installiert.
Es läuft alles soweit bis auf den VDR mit der Tevii S480 denn die kann nicht tunen. Es wird an den XBMC oder Streamdev kein Sender angezeigt.
Hier mal was ich schon alles gemacht habeEDIT:
Das Netzteil hat abend heute seinen Geist aufgegeben (somit hat die SAT Karte wohl zu wenig Strom bekommen)ich bin nach der Anleitung im LinuxTV Wiki vorgegangen
cd /usr/local/src
hg clone http://mercurial.intuxication.org/hg/s2-liplianin
cd s2-liplianin make KERNELRELEASE=$(uname -r) -i -j2
make KERNELRELEASE=$(uname -r) install
make makelinks
rebootcd /usr/local/src
wget http://www.tevii.com/s2_liplianin_1.tar
tar xvf s2_liplianin_1.tar
cd tevii_s2_liplianin-eb8a914cd499/linux/firmware/
cp *.fw /usr/lib/firmware
rebootlaut ausgaben wird die Karte sauber erkannt
yavdr 1.7.18 mit streamdev und vnsi server aus dem repository installiert
vdr gestoppt
vdr configs aus dem alten i386 nach /etc/vdr und /var/lib/vdr kopiert und rechte nochmal auf vdr gesetzt
vdr gestartetXBMC verbindet aber Sender geht keiner genauso mit streamdev und vlc
Ich hoffe das mir jemand nen Tip geben kan wo ich weiter suchen kann oder wo ich nen fehler gemacht gabe
Code
Display Moreroot@ubuntu:~# lspci -nnk 00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] 00:01.0 ISA bridge [0601]: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] 00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] 00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] 00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] 00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Kernel driver in use: ohci_hcd 00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Kernel driver in use: ehci_hcd 00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Kernel driver in use: ohci_hcd 00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Kernel driver in use: ehci_hcd 00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device [0403]: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1) Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82fe] Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) 00:09.0 SATA controller [0106]: nVidia Corporation MCP78S [GeForce 8200] AHCI Controller [10de:0ad4] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Kernel driver in use: ahci Kernel modules: ahci 00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet [10de:0760] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Kernel driver in use: forcedeth Kernel modules: forcedeth 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1) Kernel modules: shpchp 00:10.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1) Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1) Kernel driver in use: pcieport Kernel modules: shpchp 00:13.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) Kernel driver in use: pcieport Kernel modules: shpchp 00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) Kernel driver in use: pcieport Kernel modules: shpchp 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Kernel modules: amd64_edac_mod 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Kernel driver in use: k8temp Kernel modules: k8temp 01:0a.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 70) Subsystem: ASUSTeK Computer Inc. IEEE 1394a Firewire Controller [1043:8294] Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce 8300] [10de:0848] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 05:00.0 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] Subsystem: Device [a000:4000] Kernel driver in use: ohci_hcd 05:00.1 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] Subsystem: Device [a000:4000] Kernel driver in use: ehci_hcd 05:00.2 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] Subsystem: Device [a000:4000] Kernel driver in use: ohci_hcd 05:00.3 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] Subsystem: Device [a000:4000] Kernel driver in use: ehci_hcd 05:00.4 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] Subsystem: Device [a000:4000] Kernel driver in use: ohci_hcd 05:00.5 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] Subsystem: Device [a000:4000] Kernel driver in use: ehci_hcd 05:00.6 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] Subsystem: Device [a000:4000] Kernel driver in use: ohci_hcd 05:00.7 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] Subsystem: Device [a000:4000] Kernel driver in use: ehci_hcd
Code
Display Moreroot@ubuntu:~# lsusb Bus 012 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 003: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub Bus 008 Device 002: ID 0c45:7403 Microdia Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 9022:d660 TeVii Technology Ltd. DVB-S2 S660 Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 9022:d660 TeVii Technology Ltd. DVB-S2 S660 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Code
Display Moreroot@ubuntu:~# dmesg | grep -i dvb [ 10.811523] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware [ 10.900555] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw' [ 11.130049] dvb-usb: found a 'TeVii S660 USB' in warm state. [ 11.131037] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 11.132131] DVB: registering new adapter (TeVii S660 USB) [ 11.423229] dvb-usb: MAC address: 00:18:bd:5b:54:52 [ 11.479226] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)... [ 11.481762] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.0/0000:05:00.1/usb3/3-1/input/input5 [ 11.481982] dvb-usb: schedule remote query interval to 150 msecs. [ 11.481987] dvb-usb: TeVii S660 USB successfully initialized and connected. [ 11.482012] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware [ 11.485204] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw' [ 11.660066] dvb-usb: found a 'TeVii S660 USB' in warm state. [ 11.661030] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 11.661385] DVB: registering new adapter (TeVii S660 USB) [ 11.998817] dvb-usb: MAC address: 00:18:bd:5b:54:53 [ 12.004333] DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)... [ 12.005747] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.0/0000:05:00.3/usb4/4-1/input/input6 [ 12.005967] dvb-usb: schedule remote query interval to 150 msecs. [ 12.005972] dvb-usb: TeVii S660 USB successfully initialized and connected.
im syslog steht
Code
Display MoreJul 28 07:45:10 ubuntu vdr: [1653] frontend 0/0 timed out while tuning to channel 2, tp 111362 Jul 28 07:45:11 ubuntu vdr: [1656] frontend 1/0 timed out while tuning to channel 9, tp 111464 Jul 28 07:45:31 ubuntu vdr: [1656] frontend 1/0 timed out while tuning to channel 60, tp 111758 Jul 28 07:45:32 ubuntu vdr: [1653] frontend 0/0 timed out while tuning to channel 53, tp 111718 Jul 28 07:45:52 ubuntu vdr: [1653] frontend 0/0 timed out while tuning to channel 49, tp 111796 Jul 28 07:45:53 ubuntu vdr: [1656] frontend 1/0 timed out while tuning to channel 1, tp 111837 Jul 28 07:46:13 ubuntu vdr: [1656] frontend 1/0 timed out while tuning to channel 50, tp 111915 Jul 28 07:46:14 ubuntu vdr: [1653] frontend 0/0 timed out while tuning to channel 63, tp 111876 Jul 28 07:46:34 ubuntu vdr: [1653] frontend 0/0 timed out while tuning to channel 3, tp 111954 Jul 28 07:46:34 ubuntu vdr: [1656] frontend 1/0 timed out while tuning to channel 62, tp 111992 Jul 28 07:46:55 ubuntu vdr: [1653] frontend 0/0 timed out while tuning to channel 79, tp 112031 Jul 28 07:46:56 ubuntu vdr: [1656] frontend 1/0 timed out while tuning to channel 67, tp 112070 Jul 28 07:47:16 ubuntu vdr: [1656] frontend 1/0 timed out while tuning to channel 100, tp 112149 Jul 28 07:47:17 ubuntu vdr: [1653] frontend 0/0 timed out while tuning to channel 203, tp 112109
MFG
Oliver -
danke das hat wunderbar funktioniert
spitze
gruß
oliver -
Hallo zusammen
ich habe bei meinen vdr das Betriebssystem upgegradet von jaunty auf Ubuntu Lucid.
Jetzt nach dem upgrade kann ich en vdr nicht mehr starten wegen syntax fehler
Installiert habe ich den VDR vor langer zeit mit x-vdr.Ich hoffe mir kann jemand helfen
folgender Fehler kommt
hier das start script das in /etc/init.d liegt
Code
Display More#! /bin/sh ### BEGIN INIT INFO # Provides: vdr # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Linux Video Disk Recorder ### END INIT INFO # x-vdr (Installations-Skript fuer einen VDR mit Debian als Basis) # von Marc Wernecke - www.zulu-entertainment.de # 12.02.2009 # /etc/init.d/vdr PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin DESC="Linux Video Disk Recorder" NAME="vdr" LOGGER="logger -s ${0##*/} " if [ -f /etc/default/vdr ]; then . /etc/default/vdr else $LOGGER "exit, because /etc/default/vdr does not exists" exit 1 fi DAEMON=$VDRBINDIR/runvdr PIDFILE=/var/run/runvdr.pid test -x "$DAEMON" || exit 0 test -x "$VDRPRG" || exit 0 function clean_console() { if [ "$KEYB_TTY" != "" ]; then tput -Tlinux clear > $KEYB_TTY fi } function switch_console() { if [ "$KEYB_TTY" != "" ]; then clean_console echo -e "This tty is currently mapped to VDR, keypresses aren't echoed.\r" > $KEYB_TTY echo -n "For a login prompt switch to another console." > $KEYB_TTY chvt `echo "$KEYB_TTY" | sed "s/\/dev\/tty//"` REDIRECT="< $KEYB_TTY" fi } function get_status() { if start-stop-daemon --start --startas $DAEMON --test \ --name $(basename $DAEMON) --pidfile $PIDFILE >/dev/null then echo " - is not running." exit 3 else echo " - is running." exit 0 fi } 1,1 Anfang function startvdr() { if [ "$AUTOSTART" != "off" ]; then # only start vdr if there is no other instance running if start-stop-daemon --start --startas $DAEMON --test \ --name $(basename $DAEMON) --pidfile $PIDFILE >/dev/null then # stopping dvb-bootsplash (mplayer) [ -x /etc/init.d/dvb-bootsplash ] && /etc/init.d/dvb-bootsplash stop # starting LCDd # uncomment this only if you DONT use the systems init rc # [ "$LCDproc" = "on" ] && [ -f /etc/init.d/lcdd ] && /etc/init.d/lcdd start & # starting Video Disk Recorder # switch_console start-stop-daemon --start --quiet --startas $DAEMON --background \ --name $(basename $DAEMON) --pidfile $PIDFILE --make-pidfile -- $REDIRECT else echo -n " - seems to be running already" fi else echo -n " - aborted (to enable the daemon, set AUTOSTART=\"on\" in /etc/default/vdr)" fi } function stopvdr() { if start-stop-daemon --stop --retry 30 \ --name $(basename $DAEMON) --pidfile $PIDFILE >/dev/null then start-stop-daemon --stop --retry 30 --oknodo --exec $VDRPRG >/dev/null rm -f $PIDFILE clean_console # graphlcd shutdown sequence [ "$graphlcd_base" = "on" ] && [ -f /etc/init.d/x-lcd ] && /etc/init.d/x-lcd stop # stopping LCDd # uncomment this only if you DONT use the systems init rc # [ "$LCDproc" = "on" ] && [ -f /etc/init.d/lcdd ] && /etc/init.d/lcdd stop else echo -n " - seems not to be running" fi } case "$1" in start) echo -n "Starting $DESC: $NAME" startvdr echo "." ;; stop) echo -n "Stopping $DESC: $NAME" stopvdr echo "." ;; restart|force-reload) echo -n "Restarting $DESC: $NAME" stopvdr sleep 4 startvdr echo "." ;; status) echo -n "Getting status of $DESC: $NAME" get_status ;; *) N=/etc/init.d/$NAME echo "Usage: $N {start|stop|restart|force-reload}" >&2 exit 1 ;; esac exit 0
MFG
Oliver -
Hallo zusammen
nach jeden reboot sind die Sound einstellungen nicht gespeichert.
Woran kann das liegen ??alsa 1.0.20 ist installiert
sudo alsamixer ruf ich auf stell den PCM regler auf 100% geh mit ESC raus
dann
sudo alsactl store (auch mit 0) probiertdann starte ich startx && xbmc --standalone
Sound geht bis zum nächsten reboot
dann ist wieder der PCM Regler auf 0%Hab das ganze auch schon in gnome geändert und xbmc gestartet gleiches in grün
Gruß
Oliver
-
Hallo zusammen
so nachdem ich meinen Atric Rev. 5 Einschalter bekommen habe wurde sich natürlich gleich an den Einbau gemacht was auch soweit alles funktioniert hat.
1. lirc hardware.conf geändert
2. lircd module geändert
3. serial.conf erstellt
4. modprobe.d/lirc-serial geändert
5. geschaut ob lirc sauber startet ( was es auch macht)
6. irrecord ausgeführt um die Hauppauge FB anzulernen
7. lircd.conf ersetzt mit den angelernten Daten
8. Lirc startet und XBMC lässt sich mehr oder weniger steuern über die FBmein Problem ist jetzt das ich jede Taste an der FB zweimal drücken muss um das was zur beim ersten Druck über den original Empfänger der HVR-4000 ging zu erreichen.
Als Beispiel:
Ich will TV schauen und muss natürlich in das passende Menu TV
jetzt muss ich immer die links taste zweimal drücken das er zum nächsten Menueintrag geht.
Wenn cih aber dazwischen mal hoch, runter oder auf OK muss nimmt er es sofort.
Also immer wenn z.B. auf links wieder links kommt muss ich zweimal drücken bis wass passiert am BildschirmHat das auch noch wer ausser mir ??
Hab ich falsch angelernt ?Gruß
Oliver -
Hallo nochmal
weis jetzt jemand jemand wie ich das Menu in die Lircmap.xml reinbringe ?
Was muss in der <> stehen ?Gruß
Oliver -
Hallo joachim
danke für den tip dadurch kann ich den rechner auch neu starten ohne vorher auszuschalten nur der eject fehlt mir jetzt noch gibts da noch nen code dafür ?
Gruß
Oliver -
Hallo zusammen
ich brauch nochmal eure Hilfe da ich nicht weis wie ich beim Aeon Skin die DVD die ich eingelegt habe wieder rausbekomme ohne auf den PM Skin zu wechseln?
Mir fehlt bei dem Skin das Menu für beenden, neustart, auswerfen
Kann man das einblenden lassen oder auf der Fernbedienung mit unterbringen ?
Und wie komme ich aus dem LiveTV direkt in die Info zur aktuellen Sendung?Gruß
Rennsemmel -
Hallo zusammen
hab da jetzt noch ne frage wegen dem OSD das wird mehr oben links angezeigt und ganz klein
wie kann ich das ändern ?
Gruß
Rennsemmel -
Hallo zusammen
habe jetzt die xineliboutput cvs erstellt und da bekomme ich ein TV Bild was ich aber nicht ganz verstehe da ja die 1.04 auch gehen soll
Gruß
Rennsemmel
-
Hallo zusammen
wie es schon in der Überschrift steht bekomme ich bei vdrplayer mit vdr-sxfe, xineliboutput nur das No Signal Bild. Starte ich aber den vdrplayer mit xine bekomme ich das TV Signal. woran kann das liegen ??
habe auch schon auf der Konsole versucht mit folgenden Befehl mit dem gleichen Ergebniss
vdr-sxfe --video=vdpau --post tvtime:method=use_vo_driver xvdr+tcp://127.0.0.1ubuntu 9.04
xineliboutput ist 1.04
vdr 1.7.7beim starten von vdrplayer mit xine kommt folgendes im syslog
Code
Display MoreJul 31 09:28:52 xbmc-vdr vdr: [13820] [xine..put] Client 0 connected: 127.0.0.1:45064 Jul 31 09:28:52 xbmc-vdr vdr: [13820] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes Jul 31 09:28:52 xbmc-vdr vdr: [13820] [xine..put] Client 1 connected: 127.0.0.1:45065 Jul 31 09:28:52 xbmc-vdr vdr: [13820] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes Jul 31 09:28:52 xbmc-vdr vdr: [13820] [xine..put] Data connection (TCP) requested Jul 31 09:28:52 xbmc-vdr vdr: [13820] [xine..put] cBackgroundWriterI initialized (buffer 512 kb) Jul 31 09:28:52 xbmc-vdr vdr: [13820] [xine..put] cTcpWriter initialized (buffer 512 kb) Jul 31 09:28:53 xbmc-vdr vdr: [13807] [xine..put] Forcing primary device, original index = 2 Jul 31 09:28:53 xbmc-vdr vdr: [13807] setting primary device to 3 Jul 31 09:28:53 xbmc-vdr vdr: [13807] switching to channel 5 Jul 31 09:28:53 xbmc-vdr vdr: [13807] OSD size changed to 480x324 @ 4:3 Jul 31 09:28:55 xbmc-vdr vdr: [13998] [xine..put] Detected video size 720x576 Jul 31 09:29:02 xbmc-vdr vdr: [14000] osdteletext-receiver thread ended (pid=13807, tid=14000) Jul 31 09:29:02 xbmc-vdr vdr: [13807] switching to channel 6 Jul 31 09:29:02 xbmc-vdr kernel: [ 1752.643489] vdr-sxfe[15565]: segfault at b1b77000 ip b7dbcf12 sp b19811e4 error 4 in libc-2.9.so[b7d44000+15c000] Jul 31 09:29:02 xbmc-vdr vdr: [13820] [xine..put] Client connection 0 closed Jul 31 09:29:02 xbmc-vdr vdr: [13820] [xine..put] Closing connection 0 Jul 31 09:29:02 xbmc-vdr vdr: [13999] TS buffer on device 1 thread ended (pid=13807, tid=13999) Jul 31 09:29:02 xbmc-vdr vdr: [13998] buffer stats: 147956 (7%) used Jul 31 09:29:02 xbmc-vdr vdr: [13998] receiver on device 1 thread ended (pid=13807, tid=13998) Jul 31 09:29:02 xbmc-vdr vdr: [15577] receiver on device 1 thread started (pid=13807, tid=15577) Jul 31 09:29:02 xbmc-vdr vdr: [15578] TS buffer on device 1 thread started (pid=13807, tid=15578) Jul 31 09:29:02 xbmc-vdr vdr: [13807] buffer stats: 0 (0%) used Jul 31 09:29:02 xbmc-vdr vdr: [13807] creating directory /var/lib/vdrmedia/epgdata/vtx/S19.2E-1-1089-12020 Jul 31 09:29:02 xbmc-vdr vdr: [15579] osdteletext-receiver thread started (pid=13807, tid=15579) Jul 31 09:29:02 xbmc-vdr vdr: [13807] [xine..put] Restoring original primary device 2 Jul 31 09:29:02 xbmc-vdr vdr: [13807] [xine..put] Restoring primary device, xineliboutput OSD still open ! Jul 31 09:29:02 xbmc-vdr vdr: [13807] setting primary device to 2 Jul 31 09:29:03 xbmc-vdr vdr: [13807] [xine..put] cXinelibOsdProvider: shutting down ! Jul 31 09:29:03 xbmc-vdr vdr: [13807] [xine..put] cXinelibOsdProvider: OSD open while OSD provider shutting down ! Jul 31 09:29:03 xbmc-vdr vdr: [13807] switching to channel 6 Jul 31 09:29:03 xbmc-vdr acpid: client 15480[0:0] has disconnected Jul 31 09:29:03 xbmc-vdr acpid: client 15480[0:0] has disconnected Jul 31 09:29:03 xbmc-vdr acpid: client connected from 15480[0:0] Jul 31 09:29:03 xbmc-vdr vdr: [13807] OSD size changed to 720x576 @ 4:3 Jul 31 09:29:03 xbmc-vdr acpid: client connected from 15480[0:0] Jul 31 09:29:03 xbmc-vdr vdr: [15577] cVideoRepacker: switching to MPEG1/2 mode Jul 31 09:29:03 xbmc-vdr vdr: [15577] cVideoRepacker: operating in MPEG1/2 mode Jul 31 09:30:01 xbmc-vdr /USR/SBIN/CRON[15663]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
es handelt sich um meinen HDTV Pc unten in der Signatur
Gruß Rennsemmel