Posts by freulein

freulein · vdr ruckeld bei aufnahme freulein March 22, 2009 at 4:36 PM

also bei mir hat alles geklappt es waren die bios einstellung.
ich bedanke mich für die geile hilfe die ich hier bekommen habe.

nochmals danke danke

freulein · vdr ruckeld bei aufnahme freulein March 20, 2009 at 10:40 PM

danke, danke war so

freulein · vdr ruckeld bei aufnahme freulein March 20, 2009 at 9:26 PM

also hier meine hardware:
ein motherbord von intel D946GZIS mit einem dual core 1.6 ghz
1024 mb ram
eine festplatte WDC WD800AAJS-00PSA0 sata 80 gb
einen lg dvd player sata
eine wintv nexus 2.2

freulein · vdr ruckeld bei aufnahme freulein March 20, 2009 at 7:44 PM

also

ich hab jede menge im bios verstellt aber immer hat mie cfdsk gesagt das die platte hdc heist und nicht sd(X). tja woran kann das noch liegen?

mfg

freulein · vdr ruckeld bei aufnahme freulein March 20, 2009 at 7:18 PM

hallo
hier mal ein teil der install.log
ich hoffe es reicht

Thu Mar 19 20:33:50 UTC 2009
<System /dev/hdc2 zu klein - Minimum 3700 MB>
<Video /dev/hdc5 nicht vorhanden>
Exec <dd if=/dev/zero of=/dev/hdc bs=512 count=1>
1+0 records in
1+0 records out
Exec <parted -s /dev/hdc mklabel msdos>
Exec <cat /tmp/parted.out>
Disk geometry for /dev/hdc: 0.000-76319.085 megabytes
Disk label type: msdos
Minor Start End Type Filesystem Flags
Exec <parted -s /dev/hdc mkpart primary ext2 0 50>
Exec <parted -s /dev/hdc mkpart primary ext2 50 6050>
Exec <parted -s /dev/hdc mkpart primary linux-swap 6050 6310>
Exec <parted -s /dev/hdc mkpart extended 6310 76319.085>
Exec <parted -s /dev/hdc mkpart logical ext2 6310 76319.085>
<Partitionen wurden angelegt>
<Formatiere Boot-Partition /dev/hdc1 mit ext2>
Exec <mke2fs /dev/hdc1>
mke2fs 1.22, 22-Jun-2001 for EXT2 FS 0.5b, 95/08/09
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
12048 inodes, 48163 blocks
2408 blocks (5.00%) reserved for the super user
First data block=1
6 block groups
8192 blocks per group, 8192 fragments per group
2008 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961

Writing inode tables: 0/61/62/63/64/65/6done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 31 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Exec <tune2fs -i 0 -c 0 /dev/hdc1>
tune2fs 1.22, 22-Jun-2001 for EXT2 FS 0.5b, 95/08/09
Setting maximal mount count to -1
Setting interval between check 0 seconds
Exec <mke2fs -j /dev/hdc2>
mke2fs 1.22, 22-Jun-2001 for EXT2 FS 0.5b, 95/08/09
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
768544 inodes, 1536215 blocks
76810 blocks (5.00%) reserved for the super user
First data block=0
47 block groups
32768 blocks per group, 32768 fragments per group
16352 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736

Writing inode tables: 0/47 1/47 2/47 3/47 4/47 5/47 6/47 7/47 8/47 9/4710/4711/4712/4713/4714/4715/4716/4717/4718/4719/4720/4721/4722/4723/4724/4725/4726/4727/4728/4729/4730/4731/4732/4733/4734/4735/4736/4737/4738/4739/4740/4741/4742/4743/4744/4745/4746/47done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 30 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Exec <tune2fs -i 0 -c 0 /dev/hdc2>
tune2fs 1.22, 22-Jun-2001 for EXT2 FS 0.5b, 95/08/09
Setting maximal mount count to -1
Setting interval between check 0 seconds
<Ernenne /dev/hdc3 zur Swap-Partition>
Exec <mkswap /dev/hdc3>
Setting up swapspace version 1, size = 271429632 bytes
Exec <mount /dev/hdc5 /mnt>
mount: Mounting /dev/hdc5 on /mnt failed: Invalid argument
Exec <mkfs.xfs -f /dev/hdc5>
meta-data=/dev/hdc5 isize=256 agcount=18, agsize=1048576 blks
data = bsize=4096 blocks=17922507, imaxpct=25
= sunit=0 swidth=0 blks, unwritten=0
naming =version 2 bsize=4096
log =internal log bsize=4096 blocks=2187
realtime =none extsz=65536 blocks=0, rtextents=0
Exec <mount -t ext3 /dev/hdc2 /mnt>
Exec <mkdir /mnt/boot>
Exec <mkdir /mnt/mnt>
Exec <mkdir /mnt/mnt/data>
Exec <mount -t ext2 /dev/hdc1 /mnt/boot>
Exec <mount -t xfs /dev/hdc5 /mnt/mnt/data>
</SETUP/g2v_base.tar.lzma entpacken (Paket 1 von 19)>
</SETUP/g2v_base_boot.tar.lzma entpacken (Paket 2 von 19)>
</SETUP/g2v_base_cfg.tar.lzma entpacken (Paket 3 von 19)>
</SETUP/g2v_base_cfg_iso.tar.lzma entpacken (Paket 4 von 19)>
</SETUP/g2v_base_etc.tar.lzma entpacken (Paket 5 von 19)>
</SETUP/g2v_base_etc_vdr.tar.lzma entpacken (Paket 6 von 19)>
</SETUP/g2v_base_libmod.tar.lzma entpacken (Paket 7 von 19)>
</SETUP/g2v_base_ubin.tar.lzma entpacken (Paket 8 von 19)>
</SETUP/g2v_base_ulib.tar.lzma entpacken (Paket 9 von 19)>
</SETUP/g2v_base_ushr.tar.lzma entpacken (Paket 10 von 19)>
</SETUP/g2v_base_usr.tar.lzma entpacken (Paket 11 von 19)>
</SETUP/g2v_base_usrvdr.tar.lzma entpacken (Paket 12 von 19)>
</SETUP/g2v_base_var.tar.lzma entpacken (Paket 13 von 19)>
</SETUP/g2v_add_krnl.tar.lzma entpacken (Paket 14 von 19)>
</SETUP/g2v_add_opt.tar.lzma entpacken (Paket 15 von 19)>
</SETUP/g2v_add_port.tar.lzma entpacken (Paket 16 von 19)>
</SETUP/g2v_opt_freevo.tar.lzma entpacken (Paket 17 von 19)>
</SETUP/g2v_opt_src.tar.lzma entpacken (Paket 18 von 19)>
</SETUP/g2v_opt_vdr.tar.lzma entpacken (Paket 19 von 19)>
<fstab anpassen>
<Installationsdateien kopieren>
Exec <cp -af /SETUP/g2v_inst/* /mnt/>
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up01.tar.bz2>
_config/backup/mkiso.sh
_config/bin/hibernate.sh
_config/bin/instpkgs.sh
_config/update/g2v_up01.README
_config/update/g2v_up01.sh
_config/update/patches/up01.vdr-epg.diff
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up02.tar.bz2>
_config/bin/freevo.sh
_config/bin/hibernate.sh
_config/bin/vdrshutdown.sh
_config/update/g2v_up02.README
etc/freevo/local_conf.py
etc/conf.d/ntp-client
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up03.tar.bz2>
_config/bin/query_mb.sh
_config/bin/SMT-powerstate.sh
_config/update/g2v_up03.README
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up04.tar.bz2>
_config/update/g2v_up04.sh
_config/update/g2v_up04.README
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up05.tar.bz2>
_config/update/g2v_up05.README
_config/update/g2v_up05.sh
_config/update/patches/up05.vdrplg-image.diff
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up06.tar.bz2>
_config/update/g2v_up06.README
_config/update/g2v_up06.sh
_config/update/patches/up06.vdrplg-skinelchi.diff
_config/update/patches/up06.vdrplg-skinenigma.diff
_config/update/patches/up06.vdr-switchtimer.diff
etc/conf.d/clock
etc/init.d/vdr
etc/vdr.d/plugins/podcatcher
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up07.tar.bz2>
_config/bin/detect_partners.sh
_config/bin/g2v_log.sh
_config/install/vdr/setup.conf
_config/update/g2v_up07.README
_config/update/g2v_up07.sh
_config/update/patches/up07.vdrplg-reelchannelscan.diff
_config/update/patches/up07.vdrplg-skinenigmang.diff
_config/update/patches/up07.vdrplg-vcd.diff
etc/init.d/clock
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up08.tar.bz2>
_config/update/g2v_up08.sh
_config/update/g2v_up08.README
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up09.tar.bz2>
_config/bin/freevo.sh
_config/update/g2v_up09.README
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up10.tar.bz2>
_config/bin/default_cfg.sh
_config/update/g2v_up10.README
_config/update/g2v_up10.sh
etc/init.d/clock
etc/vdr/plugins/admin/cfgdvb.sh
usr/local/portage/patches/v4l/av7110_camtest.diff
usr/local/portage/patches/v4l/fix_eeprom.diff
usr/local/portage/patches/v4l/SMT-dvb.diff
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up11.tar.bz2>
_config/bin/burn_iso.sh
_config/bin/g2v_exit.sh
_config/bin/g2v_init.sh
_config/bin/linkvid.sh
_config/update/g2v_up11.README
_config/update/g2v_up11.sh
_config/update/patches/up11.halt.diff
etc/vdr/plugins/dvdchanger/dvdchanger_writedvd.sh
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up12.tar.bz2>
_config/bin/autoplay.sh
_config/bin/runsmt.sh
_config/bin/set_xorgres.sh
_config/bin/SMT-rgb.sh
_config/bin/stopsmt.sh
_config/bin/tvout_setup
_config/bin/vdr-xine.sh
_config/update/g2v_up12.README
etc/vdr/plugins/admin/cfggui.sh
etc/X11/xorg.conf.smt.640
etc/X11/xorg.conf.smt.720
etc/X11/xorg.conf.smt.720.2
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up13.tar.bz2>
_config/bin/autoplay.sh
_config/bin/g2v_convert.sh
_config/bin/vdr2mpg.sh
_config/update/g2v_up13.README
_config/update/g2v_up13.sh
etc/vdr.d/scripts/g2v_init.sh
etc/vdr/plugins/admin/admin.conf.default
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up14.tar.bz2>
_config/bin/autoplay.sh
_config/bin/freevo.sh
_config/bin/vdr2mpg.sh
_config/update/g2v_up14.README
etc/init.d/freevo
etc/ivman/IvmConfigActions.xml
usr/bin/replex
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up15.tar.bz2>
_config/update/g2v_up15.README
_config/update/g2v_up15.sh
_config/update/patches/up15.audiorecorder.diff
_config/update/patches/up15.recording.diff
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up16.tar.bz2>
_config/bin/autoplay.sh
_config/bin/check_noad.sh
_config/bin/detect_cpu.sh
_config/bin/detect_hwchanges.sh
_config/bin/dvb_update.sh
_config/bin/FreeVo_Cast.README
_config/bin/freevo.sh
_config/bin/freevo_update.sh
_config/bin/g2v_exit.sh
_config/bin/g2v_init.sh
_config/bin/g2v_streamcast.sh
_config/bin/get_castlogos.sh
_config/bin/get_icefxd.sh
_config/bin/get_logo.pl
_config/bin/get_shoutfxd.sh
_config/bin/instplg.sh
_config/bin/instvdr.sh
_config/bin/linkvid.sh
_config/bin/oxine_update.sh
_config/bin/query_mb.sh
_config/bin/test_modules.sh
_config/bin/vdrnoad.sh
_config/bin/vdr-xine.sh
_config/update/g2v_up16.README
_config/update/g2v_up16.sh
_config/update/g2v_vdr16.sh
_config/update/patches/freevo.diff
_config/update/README.plg16_diff
etc/vdr.d/other/gen2vdr
etc/vdr.d/scripts/g2v_record.sh
etc/vdr/plugins/mplayer/mplayer.sh
etc/vdr/reccmds/yacoto
etc/vdr/runvdr
etc/vdr/yacoto/3gp.conf
etc/vdr/yacoto/config.sh
etc/vdr/yacoto/COPYING
etc/vdr/yacoto/h264.conf
etc/vdr/yacoto/HISTORY
etc/vdr/yacoto/mp3.conf
etc/vdr/yacoto/mpeg2.conf
etc/vdr/yacoto/ogg.conf
etc/vdr/yacoto/ogg.sh
etc/vdr/yacoto/README
etc/vdr/yacoto/reccmds.conf.example
etc/vdr/yacoto/remux.sh
etc/vdr/yacoto/replex-0.1.6.8-yacoto.diff
etc/vdr/yacoto/setstream.sh
etc/vdr/yacoto/status.sh
etc/vdr/yacoto/TODO
etc/vdr/yacoto/xvid.conf
etc/vdr/yacoto/yacoto.sh
etc/vdr/yacoto/yac.sh
etc/vdr/yacoto/youtube.conf
usr/bin/replex
usr/local/portage/media-libs/xine-lib/files/digest-xine-lib-1.2.0
usr/local/portage/media-libs/xine-lib/Manifest
usr/local/portage/media-libs/xine-lib/xine-lib-1.2.0.ebuild
usr/local/portage/media-libs/xine-lib/xine-lib-9999.ebuild
usr/local/portage/media-tv/v4l-dvb-hg-endriss/ChangeLog
usr/local/portage/media-tv/v4l-dvb-hg-endriss/files/digest-v4l-dvb-hg-endriss-0.1-r2
usr/local/portage/media-tv/v4l-dvb-hg-endriss/files/digest-v4l-dvb-hg-endriss-0.1-r3
usr/local/portage/media-tv/v4l-dvb-hg-endriss/Manifest
usr/local/portage/media-tv/v4l-dvb-hg-endriss/metadata.xml
usr/local/portage/media-tv/v4l-dvb-hg-endriss/v4l-dvb-hg-endriss-0.1-r2.ebuild
usr/local/portage/media-tv/v4l-dvb-hg-endriss/v4l-dvb-hg-endriss-0.1-r3.ebuild
usr/local/portage/media-tv/v4l-dvb-multiproto/files/digest-v4l-dvb-multiproto-01
usr/local/portage/media-tv/v4l-dvb-multiproto/Manifest
usr/local/portage/media-tv/v4l-dvb-multiproto/v4l-dvb-multiproto-01.ebuild
usr/local/portage/media-video/mplayer/ChangeLog
usr/local/portage/media-video/mplayer/files/digest-mplayer-1.0_rc2
usr/local/portage/media-video/mplayer/files/mplayer-em84.patch
usr/local/portage/media-video/mplayer/files/mplayer-lavc.patch
usr/local/portage/media-video/mplayer/Manifest
usr/local/portage/media-video/mplayer/metadata.xml
usr/local/portage/media-video/mplayer/mplayer-1.0_rc2.ebuild
usr/local/portage/patches/v4l/SMT-dvb.diff
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up17.tar.bz2>
_config/bin/activy_overlay.sh
_config/bin/autoplay.sh
_config/bin/check_noad.sh
_config/bin/detect_cpu.sh
_config/bin/detect_hwchanges.sh
_config/bin/donoad.sh
_config/bin/dvbmod
_config/bin/dvb_update.sh
_config/bin/g2v_maintain_recordings.sh
_config/bin/g2v_noad.sh
_config/bin/get_castlogos.sh
_config/bin/get_icefxd.sh
_config/bin/get_shoutfxd.sh
_config/bin/hibernate.sh
_config/bin/instplg.sh
_config/bin/instvdr.sh
_config/bin/oxine.sh
_config/bin/oxine_update.sh
_config/bin/query_mb.sh
_config/bin/start_oxine.sh
_config/bin/switch_console.sh
_config/bin/usbmount.sh
_config/bin/vdrshutdown.sh
_config/bin/vdrshutdown.sh.conf
_config/bin/vdr-xine.sh
_config/freevo/oxcmd.sh
_config/freevo/vdr-enable.sh
_config/update/g2v_up17.README
_config/update/patches/up17.tvm.diff
etc/init.d/freevo
etc/init.d/oxine
etc/portage/profile/package.provided
etc/vdr/commands/recordings
etc/vdr.d/scripts/g2v_record.sh
etc/vdr/plugins/admin/admin.conf.default
etc/vdr/plugins/admin/cfggui.sh
etc/vdr/plugins/admin/setadmconf.sh
etc/vdr/plugins/mplayer/mplayer.sh.conf
etc/vdr/reccmds/g2v
etc/vdr/reccmds/marks
root/.oxine/config
root/.oxine/gamesmenu.xml
root/.oxine/lircrc
root/.oxine/mainmenu.xml
root/.oxine/mainmenu.xml.vdr
root/.oxine/mainmenu.xml.xine
root/.oxine/mediamarks_example.xml
root/.oxine/mediamarks_music.xml
root/.oxine/metar_stations
root/.oxine/toolmenu.xml
usr/bin/evtest
usr/bin/hlcut
usr/bin/vdrburn-archive.sh
usr/bin/vdrburn-copylog.sh
usr/bin/vdrburn-dvd.sh
usr/local/portage/media-tv/v4l-dvb-hg/v4l-dvb-hg-0.1-r2.ebuild
usr/local/portage/patches/v4l/all/sky2.diff
usr/local/portage/patches/v4l/SMT-dvb.diff
usr/local/src/_div/activylircd-0.4/evtest.c
usr/local/src/_div/activylircd-0.4/key2lircd.c
usr/local/src/_div/activylircd-0.4/key.map
usr/local/src/_div/activylircd-0.4/Makefile
usr/local/src/tvmovie2vdr-0.5.14/tvm2vdr.sh
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up18.tar.bz2>
etc/vdr/plugins/admin/admin.conf.default
usr/local/src/tvmovie2vdr-0.5.14/tvm2vdr.sh
_config/update/g2v_up18.sh
_config/update/g2v_up18.README
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up19.tar.bz2>
_config/bin/g2v_maintain_recordings.sh
_config/update/g2v_up19.README
_config/update/g2v_up19.sh
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up20.tar.bz2>
_config/bin/g2v_maintain_recordings.sh
_config/bin/g2v_noad.sh
_config/update/g2v_up20.README
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up21.tar.bz2>
_config/bin/detect_cpu.sh
_config/update/g2v_up21.README
_config/update/g2v_up21.sh
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up22.tar.bz2>
_config/bin/activy_msg.sh
_config/bin/autoplay.sh
_config/bin/check_df.sh
_config/bin/check_noad.sh
_config/bin/deldel.sh
_config/bin/detect_partners.sh
_config/bin/freevo_update.sh
_config/bin/g2v_init.sh
_config/bin/instplg.sh
_config/bin/linkvid.sh
_config/bin/mkLBRamDisk.sh
_config/bin/mountsrv.sh
_config/bin/undel.sh
_config/bin/x2vdr.sh
_config/update/g2v_up22.README
_config/update/g2v_up22.sh
_config/update/patches/up22.test.vdr-1.4.7-watchdog.diff
_config/update/patches/up22.test.vdr-1.6.0-watchdog.diff
_config/update/patches/up22.vdr-1.6.0-watchdog.diff
etc/init.d/gen2vdr
etc/tvtime/tvtime.xml
etc/vdr.d/plugins/skinelchi
etc/vdr.d/scripts/g2v_record.sh
etc/vdr/plugins/admin/admin.conf.default
etc/vdr/plugins/admin/setvdrconf.sh
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up23.tar.bz2>
_config/bin/freevo_update.sh
_config/update/g2v_up23.README
_config/update/g2v_up23.sh
etc/vdr.d/plugins/em84xx
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up24.tar.bz2>
_config/bin/sleeptimer.sh
_config/update/g2v_up24.README
_config/update/g2v_up24.sh
_config/update/vdr-alcd-1.3.1.tgz
etc/vdr.d/plugins/sleeptimer
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up25.tar.bz2>
_config/bin/copy2usb.sh
_config/bin/everio2vdr.sh
_config/bin/format_info.sh
_config/bin/g2v_log.sh
_config/bin/instvdr.sh
_config/bin/rec_merge_mark.sh
_config/bin/rec_merge.sh
_config/bin/rec_merge_undo.sh
_config/update/g2v_up25.README
_config/update/g2v_up25.sh
_config/update/patches/up25.vdr-1.6.0-2.diff
etc/vdr.d/plugins/xineliboutput
etc/vdr/reccmds/g2v
usr/bin/fritzwatch.sh
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up26.tar.bz2>
_config/bin/g2v_noad_n.sh
_config/bin/g2v_noad.sh
_config/bin/instplg.sh
_config/bin/set_timer.sh
_config/bin/vdrshutdown.sh
_config/update/g2v_up26.README
_config/update/g2v_up26.sh
etc/init.d/clock
etc/init.d/fritzwatch
etc/vdr.d/plugins/externalplayer
etc/vdr.d/plugins/graphtft
etc/vdr/plugins/admin/admin.conf.default
etc/vdr/reccmds/marks
usr/bin/fritzwatch.sh
Exec <tar -C /mnt -xjvf /mnt/_config/update/g2v_up27.tar.bz2>
_config/bin/activy_lcdoff.sh
_config/bin/activy_lcdtimer.sh
_config/bin/activy_msg.sh
_config/bin/activy_pb.sh
_config/bin/hibernate.sh
_config/bin/vdrshutdown.sh
_config/update/g2v_up27.README
_config/update/g2v_up27.sh
_config/update/vdr-alcd-1.4.1.tgz
<Resetting LPJ>
<Lilo ausfuehren>

freulein · vdr ruckeld bei aufnahme freulein March 20, 2009 at 3:17 PM

hallo

kernel kann ich dir leider nicht sagen da ich nicht weis wie ich ihn rausbekomme. ich habe die gen2vdr installation gemacht. auf hdc 5 liegen die aufnamen.

danke

freulein · vdr ruckeld bei aufnahme freulein March 20, 2009 at 9:42 AM

ich habe zurzeit gento 2 vdr drauf

und hier mal mount:

Last login: Thu Mar 19 23:22:09 2009 from 192.168.0.13
vdr01 ~ # mount
/dev/hdc2 on / type ext3 (rw,noatime)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec)
udev on /dev type tmpfs (rw,nosuid)
devpts on /dev/pts type devpts (rw,noexec,nosuid)
none on /dev/shm type tmpfs (rw)
none on /proc/bus/usb type usbfs (rw)
/dev/hdc5 on /mnt/data type xfs (rw,noatime)
/dev/hdc1 on /boot type ext2 (rw,noatime)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
vdr01 ~ #

freulein · vdr ruckeld bei aufnahme freulein March 20, 2009 at 12:27 AM

leider habe ich am ide port keine platte oder cdrom.

aber am sata bus liegt eine wd platte und ein cdrom.

freulein · vdr ruckeld bei aufnahme freulein March 19, 2009 at 11:26 PM

hier nun die hdparm

vdr01 ~ # hdparm -Tt /dev/hdc

/dev/hdc:
Timing cached reads: 1720 MB in 2.00 seconds = 859.61 MB/sec
Timing buffered disk reads: 12 MB in 3.54 seconds = 3.39 MB/sec
vdr01 ~ # hdparm -i /dev/hdc

/dev/hdc:

Model=WDC WD800AAJS-00PSA0, FwRev=05.06H05, SerialNo=WD-WCAP90465728
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7

* signifies the current active mode

freulein · vdr ruckeld bei aufnahme freulein March 19, 2009 at 11:18 PM

hier mal die logs

Linux version 2.6.23.11-gentoo (root@vdr01) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #5 SMP PREEMPT Sat Dec 15 15:11:42 CET 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001e632000 (usable)
BIOS-e820: 000000001e632000 - 000000001e6e8000 (ACPI NVS)
BIOS-e820: 000000001e6e8000 - 000000001f573000 (usable)
BIOS-e820: 000000001f573000 - 000000001f57b000 (reserved)
BIOS-e820: 000000001f57b000 - 000000001f62c000 (usable)
BIOS-e820: 000000001f62c000 - 000000001f630000 (reserved)
BIOS-e820: 000000001f630000 - 000000001f6a8000 (usable)
BIOS-e820: 000000001f6a8000 - 000000001f6ea000 (ACPI NVS)
BIOS-e820: 000000001f6ea000 - 000000001f6f3000 (usable)
BIOS-e820: 000000001f6f3000 - 000000001f6ff000 (ACPI data)
BIOS-e820: 000000001f6ff000 - 000000001f700000 (usable)
BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
503MB LOWMEM available.
found SMP MP-table at 000fe200
Entering add_active_range(0, 0, 128768) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 128768
HighMem 128768 -> 128768
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 128768
On node 0 totalpages: 128768
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 974 pages used for memmap
Normal zone: 123698 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.4 present.
ACPI: RSDP 000FE020, 0014 (r0 INTEL )
ACPI: RSDT 1F6FD038, 0038 (r1 INTEL D946GZIS 55 1000013)
ACPI: FACP 1F6FC000, 0074 (r1 INTEL D946GZIS 55 MSFT 1000013)
ACPI: DSDT 1F6F7000, 44D7 (r1 INTEL D946GZIS 55 MSFT 1000013)
ACPI: FACS 1F6A8000, 0040
ACPI: APIC 1F6F6000, 0078 (r1 INTEL D946GZIS 55 MSFT 1000013)
ACPI: WDDT 1F6F5000, 0040 (r1 INTEL D946GZIS 55 MSFT 1000013)
ACPI: MCFG 1F6F4000, 003C (r1 INTEL D946GZIS 55 MSFT 1000013)
ACPI: ASF! 1F6F3000, 00A6 (r32 INTEL D946GZIS 55 MSFT 1000013)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: Product ID: APIC at: 0xFEE00000
Enabling APIC mode: Flat. Using 0 I/O APICs
BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)
Processors: 2
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
swsusp: Registered nosave memory region: 000000000008f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
swsusp: Registered nosave memory region: 000000001e632000 - 000000001e6e8000
swsusp: Registered nosave memory region: 000000001f573000 - 000000001f57b000
swsusp: Registered nosave memory region: 000000001f62c000 - 000000001f630000
swsusp: Registered nosave memory region: 000000001f6a8000 - 000000001f6ea000
swsusp: Registered nosave memory region: 000000001f6f3000 - 000000001f6ff000
Built 1 zonelists in Zone order. Total pages: 127762
Kernel command line: auto BOOT_IMAGE=2.6 ro root=1602 noapic noisapnp video=uvesafb:off lpj=3198462
mapped APIC to ffffb000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 3196.945 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 502984k/515072k available (3606k kernel code, 10012k reserved, 1296k data, 236k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
lowmem : 0xc0000000 - 0xdf700000 ( 503 MB)
.init : 0xc05d1000 - 0xc060c000 ( 236 kB)
.data : 0xc0485961 - 0xc05c9afc (1296 kB)
.text : 0xc0100000 - 0xc0485961 (3606 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop (skipped)... 6396.92 BogoMIPS preset
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000641d 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0e00)
CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay loop (skipped)... 6396.92 BogoMIPS preset
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000641d 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
Total of 2 processors activated (12793.84 BogoMIPS).
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Time: tsc clocksource has been installed.
pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
pnp: 00:01: iomem range 0xfed00000-0xfed00fff has been reserved
pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:01: iomem range 0xfed20000-0xfed9ffff has been reserved
pnp: 00:01: iomem range 0xc0000-0xdffff could not be reserved
pnp: 00:01: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:06: ioport range 0x500-0x53f has been reserved
pnp: 00:06: ioport range 0x400-0x47f has been reserved
pnp: 00:06: ioport range 0x680-0x6ff has been reserved
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: 30300000-303fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: 30400000-304fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: 30500000-305fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: 30000000-300fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
Machine check exception polling timer started.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFS: nTxBlock = 3933, nTxLock = 31470
SGI XFS with large block numbers, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:00:02.0
PCI: Firmware left 0000:04:08.0 e100 interrupts enabled, disabling
lp: driver loaded but no devices found
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected an Intel 946GZ Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0x20000000
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
isapnp: ISA Plug & Play support disabled
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
loop: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
hda: HL-DT-STDVD-ROM GDRH20N, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
hdc: WDC WD800AAJS-00PSA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 512KiB
hdc: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 >
hda: ATAPI 52X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.20
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:1f.2
ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16)
PCI: Unable to reserve I/O region #3:8@170 for device 0000:00:1f.2
ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 1 (errno=-16)
ata_piix 0000:00:1f.2: no available native port
usbmon: debugfs is not available
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0x30204400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 10, io base 0x00002080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00002060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00002040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 11, io base 0x00002020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
ALSA device list:
No soundcards found.
oprofile: using NMI interrupt.
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 236k freed
EXT3 FS on hdc2, internal journal
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1b.0 to 64
codec_mask = 0x4
hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000
hda_codec: Unknown model for STAC927x, using BIOS defaults
hda_codec: pin nid 0a bios pin config 0221401f
hda_codec: pin nid 0b bios pin config 02a19040
hda_codec: pin nid 0c bios pin config 400000fd
hda_codec: pin nid 0d bios pin config 01114010
hda_codec: pin nid 0e bios pin config 01119011
hda_codec: pin nid 0f bios pin config 01113012
hda_codec: pin nid 10 bios pin config 400000fc
hda_codec: pin nid 11 bios pin config 400000fb
hda_codec: pin nid 12 bios pin config 400000fa
hda_codec: pin nid 13 bios pin config 50a001f0
hda_codec: pin nid 14 bios pin config 50a001f0
hda_codec: pin nid 21 bios pin config 400000f9
hda_codec: pin nid 22 bios pin config 400000ff
hda_codec: pin nid 23 bios pin config 00000000
autoconfig: line_outs=3 (0xd/0xf/0xe/0x0/0x0)
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
inputs: mic=0x0, fmic=0xb, line=0x0, fline=0x0, cd=0x0, aux=0x0
stac92xx_add_dyn_out_pins: total dac count=4
dac_nids=3 (0x2/0x5/0x4/0x0/0x0)
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
saa7146: found saa7146 @ mem e0306000 (revision 1, irq 11) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X)
adapter has MAC addr = 00:d0:5c:23:6b:06
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input3
dvb-ttpci: found av7110-0.
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0x30000000, irq 11, MAC addr 00:19:D1:A1:44:40
XFS mounting filesystem hdc5
Ending clean XFS mount for filesystem: hdc5
Adding 265064k swap on /dev/hdc3. Priority:-1 extents:1 across:265064k
Real Time Clock Driver v1.12ac
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xef
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec

freulein · vdr ruckeld bei aufnahme freulein March 19, 2009 at 10:24 PM

hallo leute

ich habe ein problem: ich habe jetzt schon jfast jeden vdr (linvdr, easyvdr, ct und jetzt gen2vdr) getestet, aber bei jedem ist es das gleiche. also muß es an der hardware liegen.das bild ruckeld bei jeder aufnahme. es ist eine sata platte verbaut liegt das vieleicht daran.

mfg

freulein · mahlzeit 4 hilfe freulein September 30, 2007 at 5:50 PM

danke

freulein · mahlzeit 4 hilfe freulein September 30, 2007 at 4:57 PM

hallo leute ich habe ein prob. vieleicht kann mir ja jemand helfen.
nach der installation geht gar nichts.

hier ist mein logread:
Sep 30 16:53:31 vdr_wohn syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Sep 30 16:53:31 vdr_wohn cron.err atd[1323]: Cannot change to /var/spool/cron/atjobs: No such file or directory
Sep 30 16:53:31 vdr_wohn user.info kernel: e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
Sep 30 16:53:31 vdr_wohn user.info kernel: e100: Copyright(c) 1999-2006 Intel Corporation
Sep 30 16:53:31 vdr_wohn user.info kernel: GSI 20 (level, low) -> IRQ 21
Sep 30 16:53:32 vdr_wohn user.info kernel: e100: eth0: e100_probe: addr 0x30000000, irq 21, MAC addr 00:19:D1:A1:44:40
Sep 30 16:53:32 vdr_wohn user.info kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Sep 30 16:53:32 vdr_wohn auth.info sshd[1403]: Server listening on 0.0.0.0 port 22.
Sep 30 16:53:33 vdr_wohn daemon.info init: ^MStarting pid 1420, console /dev/tty1: '/sbin/getty'
Sep 30 16:53:33 vdr_wohn daemon.info init: ^MStarting pid 1421, console /dev/tty2: '/sbin/getty'
Sep 30 16:53:33 vdr_wohn daemon.info init: ^MStarting pid 1422, console /dev/tty3: '/sbin/getty'
Sep 30 16:53:33 vdr_wohn daemon.info init: ^MStarting pid 1423, console /dev/tty4: '/sbin/getty'
Sep 30 16:53:33 vdr_wohn user.warn kernel: saa7146: register extension 'budget dvb'.
Sep 30 16:53:33 vdr_wohn user.info kernel: Linux video capture interface: v2.00
Sep 30 16:53:33 vdr_wohn user.warn kernel: saa7146: register extension 'budget_av'.
Sep 30 16:53:33 vdr_wohn user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Sep 30 16:53:33 vdr_wohn user.warn kernel: saa7146: register extension 'dpc7146 demonstration board'.
Sep 30 16:53:33 vdr_wohn user.warn kernel: saa7146: register extension 'dvb'.
Sep 30 16:53:33 vdr_wohn user.info kernel: GSI 21 (level, low) -> IRQ 22
Sep 30 16:53:33 vdr_wohn user.warn kernel: found saa7146 @ mem e0478000 (revision 1, irq 22) (0x13c2,0x0003).
Sep 30 16:53:33 vdr_wohn user.warn kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
Sep 30 16:53:33 vdr_wohn user.warn kernel: adapter has MAC addr = 00:d0:5c:23:6b:06
Sep 30 16:53:33 vdr_wohn user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Sep 30 16:53:33 vdr_wohn user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Sep 30 16:53:33 vdr_wohn user.warn kernel: dvb-ttpci: Crystal audio DAC @ card 0 detected
Sep 30 16:53:33 vdr_wohn user.warn kernel: saa7146 (0): registered device video0 [v4l2]
Sep 30 16:53:33 vdr_wohn user.warn kernel: saa7146 (0): registered device vbi0 [v4l2]
Sep 30 16:53:34 vdr_wohn user.warn kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)...
Sep 30 16:53:34 vdr_wohn user.info kernel: input: DVB on-card IR receiver as /class/input/input2
Sep 30 16:53:34 vdr_wohn user.info kernel: dvb-ttpci: found av7110-0.
Sep 30 16:53:34 vdr_wohn user.warn kernel: saa7146: register extension 'hexium gemini'.
Sep 30 16:53:34 vdr_wohn user.warn kernel: saa7146: register extension 'hexium HV-PCI6 Orion'.
Sep 30 16:53:34 vdr_wohn user.warn kernel: saa7146: register extension 'Multimedia eXtension Board'.
Sep 30 16:53:34 vdr_wohn user.info kernel: GSI 22 (level, low) -> IRQ 23
Sep 30 16:53:34 vdr_wohn user.debug kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64
Sep 30 16:53:34 vdr_wohn user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Sep 30 16:53:34 vdr_wohn user.info kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 30 16:53:34 vdr_wohn user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
Sep 30 16:53:34 vdr_wohn user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
Sep 30 16:53:35 vdr_wohn user.info kernel: lirc_serial: auto-detected active low receiver
Sep 30 16:53:35 vdr_wohn user.warn kernel: lirc_dev: lirc_register_plugin: sample_rate: 0
Sep 30 16:53:38 vdr_wohn auth.info sshd[1487]: Could not reverse map address 192.168.0.9.
Sep 30 16:53:42 vdr_wohn auth.info sshd[1487]: Accepted password for root from 192.168.0.9 port 4821 ssh2
Sep 30 16:53:42 vdr_wohn auth.info sshd[1487]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
Sep 30 16:53:42 vdr_wohn auth.info PAM_unix[1487]: (ssh) session opened for user root by (uid=0)
Sep 30 16:53:42 vdr_wohn auth.err PAM-env[1487]: Unable to open config file: No such file or directory
Sep 30 16:53:42 vdr_wohn auth.err PAM-env[1704]: Unable to open config file: No such file or directory
Sep 30 16:53:46 vdr_wohn user.info vdr: [2245] VDR version 1.4.6-tt-ext25 started
Sep 30 16:53:46 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-admin.so.1.4.5
Sep 30 16:53:46 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-arghdirector.so.1.4.5
Sep 30 16:53:46 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-cdda.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-channelscan.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-channelswitcher.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-chanorg.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-cpumon.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-extrecmenu.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-filebrowser.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-games.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-hdmonitor.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-launcher.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-manual.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-mount.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-mp3.so.1.4.5
Sep 30 16:53:47 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-mp3ng.so.1.4.5
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-mp3oss.so.1.4.5
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-music.so.1.4.5
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-network.so.1.4.5
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-pilot.so.1.4.5
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-premiereepg.so.1.4.5
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-setup.so.1.4.5
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-skinenigmang.so.1.4.5
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] loading plugin: /usr/lib/vdr/plugins/libvdr-sleeptimer.so.1.4.5
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] loading /etc/vdr/setup.conf
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: BootForSwitchTimer = 0
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: BufferTimeOut = 30
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: ConfirmSwitchTimers = 0
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: ConfirmSwitchTimersTimeout = 30
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: DirectChannelListSwitch = 0
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: Frameswait = 0
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: KeepBuffer = 0
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: KeepLastBuffer = 0
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: LiveReplay = 0
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: LoadMarksInterval = 0
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: LocalChannelProvide = 1
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: MinLiveBufferInactivity = 0
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: noEPGPatch = 1
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: NumLastBuffers = 1
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: RecordDolbyDigital = 1
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: ShowTimerInfo = 1
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: SortRecords = 2
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: SortRecordsHelper = 2
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: SortSwitchTimersSep = 1
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: SortTimers = 1
Sep 30 16:53:48 vdr_wohn user.err vdr: [2245] ERROR: unknown config parameter: UseRepacker = 1
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] loading /etc/vdr/sources.conf
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] loading /etc/vdr/diseqc.conf
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: sleeptimer
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: skinenigmang
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: setup
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: premiereepg
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: pilot
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: network
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: music
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: mplayer
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: mp3oss
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: mp3ng
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: mp3
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: mount
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: manual
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: launcher
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: hdmonitor
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: games
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: filebrowser
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: extrecmenu
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: dvd
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: cpumon
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: chanorg
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: channelswitcher
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: channelscan
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: cdda
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: arghdirector
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] deleting plugin: admin
Sep 30 16:53:48 vdr_wohn user.debug vdr: [2245] max. latency time 0 seconds
Sep 30 16:53:48 vdr_wohn user.info vdr: [2245] exiting
Sep 30 16:53:51 vdr_wohn user.warn kernel: saa7146: unregister extension 'budget dvb'.
Sep 30 16:53:51 vdr_wohn user.warn kernel: saa7146: unregister extension 'budget_av'.
Sep 30 16:53:51 vdr_wohn user.warn kernel: saa7146: unregister extension 'budget_ci dvb'.
Sep 30 16:53:51 vdr_wohn user.warn kernel: saa7146: unregister extension 'dpc7146 demonstration board'.
Sep 30 16:53:51 vdr_wohn user.warn kernel: saa7146: unregister extension 'dvb'.
Sep 30 16:53:51 vdr_wohn user.info kernel: ACPI: PCI interrupt for device 0000:04:00.0 disabled
Sep 30 16:53:51 vdr_wohn user.warn kernel: saa7146: unregister extension 'hexium gemini'.
Sep 30 16:53:51 vdr_wohn user.warn kernel: saa7146: unregister extension 'hexium HV-PCI6 Orion'.
Sep 30 16:53:51 vdr_wohn user.warn kernel: saa7146: unregister extension 'Multimedia eXtension Board'.
Sep 30 16:53:51 vdr_wohn user.info kernel: ACPI: PCI interrupt for device 0000:00:1b.0 disabled
Sep 30 16:53:56 vdr_wohn user.warn kernel: saa7146: register extension 'budget dvb'.
Sep 30 16:53:56 vdr_wohn user.info kernel: Linux video capture interface: v2.00
Sep 30 16:53:56 vdr_wohn user.warn kernel: saa7146: register extension 'budget_av'.
Sep 30 16:53:56 vdr_wohn user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Sep 30 16:53:56 vdr_wohn user.warn kernel: saa7146: register extension 'dpc7146 demonstration board'.
Sep 30 16:53:56 vdr_wohn user.warn kernel: saa7146: register extension 'dvb'.
Sep 30 16:53:56 vdr_wohn user.info kernel: GSI 21 (level, low) -> IRQ 22
Sep 30 16:53:56 vdr_wohn user.warn kernel: found saa7146 @ mem e0478000 (revision 1, irq 22) (0x13c2,0x0003).
Sep 30 16:53:56 vdr_wohn user.warn kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
Sep 30 16:53:56 vdr_wohn user.warn kernel: adapter has MAC addr = 00:d0:5c:23:6b:06
Sep 30 16:53:57 vdr_wohn user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Sep 30 16:53:57 vdr_wohn user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Sep 30 16:53:57 vdr_wohn user.warn kernel: dvb-ttpci: Crystal audio DAC @ card 0 detected
Sep 30 16:53:57 vdr_wohn user.warn kernel: saa7146 (0): registered device video0 [v4l2]
Sep 30 16:53:57 vdr_wohn user.warn kernel: saa7146 (0): registered device vbi0 [v4l2]
Sep 30 16:53:57 vdr_wohn user.warn kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)...
Sep 30 16:53:57 vdr_wohn user.info kernel: input: DVB on-card IR receiver as /class/input/input3
Sep 30 16:53:57 vdr_wohn user.info kernel: dvb-ttpci: found av7110-0.
Sep 30 16:53:57 vdr_wohn user.warn kernel: saa7146: register extension 'hexium gemini'.
Sep 30 16:53:57 vdr_wohn user.warn kernel: saa7146: register extension 'hexium HV-PCI6 Orion'.
Sep 30 16:53:57 vdr_wohn user.warn kernel: saa7146: register extension 'Multimedia eXtension Board'.
Sep 30 16:53:57 vdr_wohn user.info kernel: GSI 22 (level, low) -> IRQ 23
Sep 30 16:53:57 vdr_wohn user.debug kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64
Sep 30 16:53:57 vdr_wohn user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
Sep 30 16:53:58 vdr_wohn user.info kernel: lirc_serial: auto-detected active low receiver
Sep 30 16:53:58 vdr_wohn user.warn kernel: lirc_dev: lirc_register_plugin: sample_rate: 0
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] VDR version 1.4.6-tt-ext25 started
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-admin.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-arghdirector.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-cdda.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-channelscan.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-channelswitcher.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-chanorg.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-cpumon.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-extrecmenu.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-filebrowser.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-games.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-hdmonitor.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-launcher.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-manual.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-mount.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-mp3.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-mp3ng.so.1.4.5
Sep 30 16:53:58 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-mp3oss.so.1.4.5
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-music.so.1.4.5
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-network.so.1.4.5
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-pilot.so.1.4.5
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-premiereepg.so.1.4.5
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-setup.so.1.4.5
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-skinenigmang.so.1.4.5
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] loading plugin: /usr/lib/vdr/plugins/libvdr-sleeptimer.so.1.4.5
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] loading /etc/vdr/setup.conf
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: BootForSwitchTimer = 0
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: BufferTimeOut = 30
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: ConfirmSwitchTimers = 0
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: ConfirmSwitchTimersTimeout = 30
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: DirectChannelListSwitch = 0
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: Frameswait = 0
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: KeepBuffer = 0
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: KeepLastBuffer = 0
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: LiveReplay = 0
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: LoadMarksInterval = 0
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: LocalChannelProvide = 1
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: MinLiveBufferInactivity = 0
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: noEPGPatch = 1
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: NumLastBuffers = 1
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: RecordDolbyDigital = 1
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: ShowTimerInfo = 1
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: SortRecords = 2
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: SortRecordsHelper = 2
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: SortSwitchTimersSep = 1
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: SortTimers = 1
Sep 30 16:53:59 vdr_wohn user.err vdr: [3588] ERROR: unknown config parameter: UseRepacker = UseRepacker
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] loading /etc/vdr/sources.conf
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] loading /etc/vdr/diseqc.conf
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: sleeptimer
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: skinenigmang
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: setup
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: premiereepg
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: pilot
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: network
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: music
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: mplayer
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: mp3oss
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: mp3ng
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: mp3
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: mount
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: manual
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: launcher
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: hdmonitor
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: games
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: filebrowser
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: extrecmenu
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: dvd
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: cpumon
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: chanorg
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: channelswitcher
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: channelscan
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: cdda
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: arghdirector
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] deleting plugin: admin
Sep 30 16:53:59 vdr_wohn user.debug vdr: [3588] max. latency time 0 seconds
Sep 30 16:53:59 vdr_wohn user.info vdr: [3588] exiting
Sep 30 16:54:04 vdr_wohn cron.notice crond[3624]: crond 2.3.2 dillon, started, log level 8
vdr_wohn:~#

danke
mfg

freulein · dxr3 ton probleme freulein March 26, 2007 at 3:37 PM

ja hab ich berücksichtigt, ich hab schon fast alles getestet. gibt es nicht einen test um die ausgabe der dxr3 zu tetsten.

freulein · dxr3 ton probleme freulein March 24, 2007 at 8:18 PM

also die lautstärke ist voll aufgedreht aus der dxr3 karte gehe ich mit klinke in meinen verstärker.

freulein · dxr3 ton probleme freulein March 24, 2007 at 5:53 PM

hallo leute
ich hab ein prob mit meiner dxr3 karte. sie will einfach keinen ton rausgeben, bild ist sehr gut.
mein system:skystar2 dxr3 mahlzeit iso 3.2
hab im forum schon gesucht aber nichts passendes gefunden, nur irgendetwas über complet care weis aber nicht was das ist.

besten dank

freulein · usb festplatte freulein January 7, 2007 at 6:44 PM

hallo
hab im forum schon gelesen habe aber noch nichts gefunden.
ich möchte eine usb festplatte mit dem vdr verbinden.
usb stick geht bekomme ich auch gemountet.

bei der festplatte kommt immer der fehler:

Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 1-2: reset full speed USB device using uhci_hcd and address 2
usb 1-2: device descriptor read/64, error -110
usb 1-2: device descriptor read/64, error -110
usb 1-2: reset full speed USB device using uhci_hcd and address 2
usb 1-2: device descriptor read/64, error -110

was heist das??

danke

freulein · mahlzeit 3.2 hilfe freulein December 14, 2006 at 5:32 PM

hab mich jetzt damit abgefunden das ich kein ton über den klinken ausgang der dxr3 bekomme.
nun hab ich ne neue frage:
ich hab eine fernbedienung angelernt. geht auch wunderbar. nur will der vdr jedesmal wenn ich ihn anmache wieder neu anlernen.
wie kann ich es ausschalten das er sofort startet un nicht erst fragt.

mfg

freulein · mahlzeit 3.2 hilfe freulein December 14, 2006 at 9:40 AM

mir ging gestern abend die luft aus hatte keinen bock zu testen.
gibt´s noch was zum testen oder muß ich ne soundkarte in die kiste einbauen. ich weis wirklich nicht mehr weiter.

mfg

freulein · mahlzeit 3.2 hilfe freulein December 13, 2006 at 9:34 PM

em8300setup ist auf meinem vdr pc nicht verfügbar.
ich habe im plugin `dxr3´digitaler audioausgang auf nein stehen.
mein verstärker ist nicht kaputt hab nen mp3 player drangehalten.
digital gehts ja, will ich aber nicht.

danke für deine mühe mit mir