xineliboutput startet nicht

BeTuX · December 31, 2007 at 9:36 PM

Hallo,

ich versuche mich grad an xineliboutput und er startet mir vdr nicht:

aufruf von vdr über:

Quote

vdr -c /etc/vdr -L /usr/lib/vdr/lib -P"xineliboutput --local=fbfe --remote=none

gdb liefert mir:

Quote

root@slax:/# gdb vdr core
GNU gdb 6.6
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i486-slackware-linux"...
Using host libthread_db library "/lib/libthread_db.so.1".

warning: Can't read pathname for load map: Input/output error.
Reading symbols from /usr/lib/libjpeg.so.62...done.
Loaded symbols for /usr/lib/libjpeg.so.62
Reading symbols from /lib/libpthread.so.0...done.
Loaded symbols for /lib/libpthread.so.0
Reading symbols from /lib/libdl.so.2...done.
Loaded symbols for /lib/libdl.so.2
Reading symbols from /usr/lib/libcap.so.1...done.
Loaded symbols for /usr/lib/libcap.so.1
Reading symbols from /usr/lib/libfreetype.so.6...done.
Loaded symbols for /usr/lib/libfreetype.so.6
Reading symbols from /usr/lib/libfontconfig.so.1...done.
Loaded symbols for /usr/lib/libfontconfig.so.1
Reading symbols from /usr/lib/libstdc++.so.6...done.
Loaded symbols for /usr/lib/libstdc++.so.6
Reading symbols from /lib/libm.so.6...done.
Loaded symbols for /lib/libm.so.6
Reading symbols from /usr/lib/libgcc_s.so.1...done.
Loaded symbols for /usr/lib/libgcc_s.so.1
Reading symbols from /lib/libc.so.6...done.
Loaded symbols for /lib/libc.so.6
Reading symbols from /lib/ld-linux.so.2...done.
Loaded symbols for /lib/ld-linux.so.2
Reading symbols from /usr/lib/libz.so.1...done.
Loaded symbols for /usr/lib/libz.so.1
Reading symbols from /usr/lib/libexpat.so.1...done.
Loaded symbols for /usr/lib/libexpat.so.1
Reading symbols from /usr/lib/gconv/ISO8859-1.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-1.so
Reading symbols from /usr/lib/gconv/ISO8859-2.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-2.so
Reading symbols from /usr/lib/gconv/ISO8859-15.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-15.so
Reading symbols from /usr/lib/gconv/ISO8859-7.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-7.so
Reading symbols from /usr/lib/gconv/ISO8859-13.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-13.so
Reading symbols from /usr/lib/gconv/ISO8859-5.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-5.so
Reading symbols from /usr/lib/gconv/ISO8859-9.so...done.
Loaded symbols for /usr/lib/gconv/ISO8859-9.so
Reading symbols from /usr/lib/vdr/lib/libvdr-xineliboutput.so.1.5.12...done.
Loaded symbols for /usr/lib/vdr/lib/libvdr-xineliboutput.so.1.5.12
Reading symbols from /lib/librt.so.1...done.
Loaded symbols for /lib/librt.so.1
Reading symbols from /usr/lib/vdr/lib/libxineliboutput-fbfe.so.1.0.0rc2...done.
Loaded symbols for /usr/lib/vdr/lib/libxineliboutput-fbfe.so.1.0.0rc2
Reading symbols from /usr/lib/libxine.so.1...done.
Loaded symbols for /usr/lib/libxine.so.1
Reading symbols from /lib/libresolv.so.2...done.
Loaded symbols for /lib/libresolv.so.2
Reading symbols from /lib/libnsl.so.1...done.
Loaded symbols for /lib/libnsl.so.1
Reading symbols from /lib/libnss_compat.so.2...done.
Loaded symbols for /lib/libnss_compat.so.2
Reading symbols from /lib/libnss_nis.so.2...done.
Loaded symbols for /lib/libnss_nis.so.2
Reading symbols from /lib/libnss_files.so.2...done.
Loaded symbols for /lib/libnss_files.so.2
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_dvd.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_dvd.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_file.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_file.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_http.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_http.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_mms.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_mms.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_pvr.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_pvr.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_v4l.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_v4l.so
Reading symbols from /usr/lib/libasound.so.2...done.
Loaded symbols for /usr/lib/libasound.so.2
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_vcd.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_vcd.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_vcdo.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_vcdo.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_dvb.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_dvb.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_inp_cdda.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_inp_cdda.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_decode_real.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_decode_real.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_decode_a52.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_decode_a52.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_decode_ff.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_decode_ff.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/xineplug_decode_sputext.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/xineplug_decode_sputext.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/post/xineplug_post_goom.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/post/xineplug_post_goom.so
Reading symbols from /usr/lib/xine/plugins/1.1.8/post/xineplug_post_tvtime.so...done.
Loaded symbols for /usr/lib/xine/plugins/1.1.8/post/xineplug_post_tvtime.so
Core was generated by `vdr -c /etc/vdr -L /usr/lib/vdr/lib -Pxineliboutput --local=fbfe --remote=none'.
Program terminated with signal 6, Aborted.
#0 0xb7c3bc87 in raise () from /lib/libc.so.6
/QUOTE]

heißt das, dass er bei
[QUOTE]Loaded symbols for /usr/lib/xine/plugins/1.1.8/post/xineplug_post_tvtime.so

Display More

draufgeht?

muss ich tvtime auch installieren?

mfg,
thomas

wilderigel · December 31, 2007 at 9:41 PM

laeuft denn framebuffer?
was sagt das log vom vdr dazu?

BeTuX · December 31, 2007 at 9:50 PM

hallo,

danke an den vdr log hab ich noch gar nicht gedacht

Quote

Dec 31 21:28:26 (none) vdr: [5395] Local decoder/display (cXinelibThread) thread started (pid=5388, tid=5395)
Dec 31 21:28:26 (none) vdr: [5395] [vdr-fe] fbfe_display_open: failed to set /dev/tty to graphics mode
Dec 31 21:28:26 (none) vdr: [5395] [vdr-fe] (ERROR (xine_fbfe_frontend.c,190): Invalid argument)
Dec 31 21:28:28 (none) vdr: [5392] CAM 1: no module present
Dec 31 21:28:28 (none) vdr: [5392] CAM 2: no module present
Dec 31 21:28:28 (none) vdr: [5395] [vdr-fe] fbfe_display_close: failed to set /dev/tty to text mode
Dec 31 21:28:28 (none) vdr: [5395] [vdr-fe] (ERROR (xine_fbfe_frontend.c,272): Invalid argument)
Dec 31 21:28:28 (none) vdr: [5395] Local decoder/display (cXinelibThread) thread ended (pid=5388, tid=5395)

Display More

muss ich ihn nur mehr dazu krieben nicht /dev/tty zu verwenden ?!

weißt du wie ich ihm sage, dass er /dev/fb0 nehmen soll.

/dev/fb0 existiert..

Quote

root@slax:~# fbset -i

mode "720x576-74"
# D: 41.475 MHz, H: 44.693 kHz, V: 74.488 Hz
geometry 720 576 720 1152 32
timings 24111 88 32 16 4 88 4
rgba 8/16,8/8,8/0,8/24
endmode

Frame buffer device information:
Name : UNICHROME
Address : 0xe0000000
Size : 16510976
Type : PACKED PIXELS
Visual : TRUECOLOR
XPanStep : 0
YPanStep : 1
YWrapStep : 0
LineLength : 2880
MMIO Address: 0xe4000000
MMIO Size : 16777216
Accelerator : Unknown (77)
root@slax:~#

Display More

Quote

root@slax:~# dfbinfo

=======================| DirectFB 1.1.1 |=======================
(c) 2001-2007 The DirectFB Organization (directfb.org)
(c) 2000-2004 Convergence (integrated media) GmbH
------------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2007-12-31 17:58)
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 5796)...
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 5797)...
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5798)...
(*) DirectFB/Input: Power Button (FF) (1) 0.1 (directfb.org)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5799)...
(*) DirectFB/Input: Power Button (CM) (2) 0.1 (directfb.org)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5800)...
(*) DirectFB/Input: Macintosh mouse button emulatio (3) 0.1 (directfb.org)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5801)...
(*) DirectFB/Input: AT Translated Set 2 keyboard (4) 0.1 (directfb.org)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5802)...
(*) DirectFB/Input: PC Speaker (5) 0.1 (directfb.org)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 5803)...
(*) DirectFB/Input: Keyboard 0.9 (directfb.org)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: VIA/S3G CLE266/UniChrome 0.4 (-)

Display More

wilderigel · December 31, 2007 at 10:50 PM

ev wegen unicrom treiber?
mal mit --local=none und --remote=37890 starten?
dann kannste mit vdr-fbfe mal ein wenig experimentieren.

BeTuX · December 31, 2007 at 11:11 PM

der unichrome kommt vom via-fb modul.

werds mal mit remote testen.

danke!!!

BeTuX · December 31, 2007 at 11:40 PM

ich bekomme leider trotz allem kein bild.

vdr startet jetzt zwar, aber auch wenn ich versuche den stream mit VLC über Windwos abzugreifen, dann kommt nur ein

Quote

Dec 31 23:33:20 (none) vdr: [8209] [xine..put] Client 0 connected: 192.168.1.4:4 643
Dec 31 23:33:20 (none) vdr: [8209] [xine..put] HTTP Request complete
Dec 31 23:33:20 (none) vdr: [8209] [xine..put] HTTP streaming primary device feed

im syslog.

schade. mal sehen ob das noch wird

gibt es an die xine-lib mindestanforderungen, die man mitkompilieren muss, damit es läuft?

ich habe zeimlich viel ausgeschalten, damit ich nciht zuviele abhängigkeiten hab.

wilderigel · December 31, 2007 at 11:49 PM

ev fehlt noch --primary

ansonsten sollte wenn freigegeben (svdrphosts.conf) auch empfang mittels vlc moeglich sein.

BeTuX · December 31, 2007 at 11:51 PM

was meinst du mit --primary ?

bei mir ist das ganze subnetz freigegeben. dies sollte also passen.

wilderigel · December 31, 2007 at 11:53 PM

naja, als plugin parameter

BeTuX · December 31, 2007 at 11:54 PM

da find ich in der doku nichts. was muss ich da mitangeben?

wilderigel · December 31, 2007 at 11:55 PM

-p
--primary
Force xineliboutput to be primary device when there are active frontend(s)

BeTuX · January 1, 2008 at 12:46 AM

Hallo,

-p war die lösung. VLC geht nun mal... Super start ins neue Jahr *hehe*

danke für die Hilfe!

werds dann mal mit FB probieren.

BeTuX · January 1, 2008 at 10:26 AM

Hallo,

bin jetzt einen Schritt weiter:

es lag am viafb Framebuffer modul -> irgendwie läuft dfbinfo auch nicht ganz durch.

habs nun mal mit dem vesa fb probiert und komm bis hier her:

Quote

VDR server not given, searching ...
Found VDR server: host 192.168.1.2, port 37890
[5070] [vdr-fe] fbfe_display_open: failed to set /dev/tty to graphics mode
[5070] [vdr-fe] (ERROR (xine_fbfe_frontend.c,190): Invalid argument)
(*) DirectFB/Core: Single Application Core. (2007-12-31 17:58)
(*) Direct/Modules: suppress module 'keyboard'
(*) Direct/Modules: suppress module 'linux_input'
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 5072)...
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Surface: Allocated 640x480 8bit LUT8 buffer at offset 0 and pitch 640.
(*) FBDev/Mode: (Post)Setting 640x480 LUT8
(*) FBDev/Mode: Switched to 640x480 (640x480) at 8 bit LUT8 (wanted LUT8).
(!) DirectFB/FBDev: Panning display failed (x=0 y=0 ywrap=0 vbl=0)!
--> Invalid argument
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: (Post)Setting 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Switched to 640x480 (640x480) at 8 bit LUT8 (wanted LUT8).
(!) DirectFB/FBDev: Panning display failed (x=0 y=0 ywrap=0 vbl=0)!
--> Invalid argument
(*) FBDev/Surface: Allocated 640x480 8bit LUT8 buffer at offset 0 and pitch 640.
(*) FBDev/Mode: (Post)Setting 640x480 LUT8
(*) FBDev/Mode: Switched to 640x480 (640x480) at 8 bit LUT8 (wanted LUT8).
(!) DirectFB/FBDev: Panning display failed (x=0 y=0 ywrap=0 vbl=0)!
--> Invalid argument
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: (Post)Setting 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Testing 640x480 LUT8
(*) FBDev/Mode: Preparing switch to 640x480 LUT8
(*) FBDev/Mode: Switched to 640x480 (640x480) at 8 bit LUT8 (wanted LUT8).
(!) DirectFB/FBDev: Panning display failed (x=0 y=0 ywrap=0 vbl=0)!
--> Invalid argument
(*) FBDev/Surface: Allocated 640x480 8bit LUT8 buffer at offset 0 and pitch 640.
(*) FBDev/Mode: (Post)Setting 640x480 LUT8
(*) FBDev/Mode: Switched to 640x480 (640x480) at 8 bit LUT8 (wanted LUT8).
(!) DirectFB/FBDev: Panning display failed (x=0 y=0 ywrap=0 vbl=0)!
--> Invalid argument

Press Esc to exit

[5070] [vdr-fe] fe_xine_open: xine_open("xvdr://192.168.1.2:37890#nocache;demux:mpeg_block") failed
Error opening xvdr://192.168.1.2:37890
(*) FBDev/Surface: Allocated 640x480 8bit LUT8 buffer at offset 0 and pitch 640.
(*) FBDev/Mode: (Post)Setting 640x480 LUT8
(*) FBDev/Mode: Switched to 640x480 (640x480) at 8 bit LUT8 (wanted LUT8).
(!) DirectFB/FBDev: Panning display failed (x=0 y=0 ywrap=0 vbl=0)!
--> Invalid argument
[5070] [vdr-fe] fbfe_display_close: failed to set /dev/tty to text mode
[5070] [vdr-fe] (ERROR (xine_fbfe_frontend.c,272): Invalid argument)
root@slax:~#

Display More

Sollte es mit vesa FB auch funktionieren?

Participate now!