[ANNOUNCE] neues EIS/Fair VDR Packet 0.6.7 verfügbar

- runvdr Script groesstenteils komplett neu geschrieben
    und das Einbinden von Plugin-Packeten wurde umgestellt.
    ( Siehe /usr/share/doc/vdr-plugin/template )
  - Es gibt jetzt die Moeglichkeit in der Konfigdatei den
    Konsolenbildschirmschoner mit VDR_DISABLE_CONSOLE_SCREENSAVER
    auszuschalten.
  - Der MPEG2/DVD Export mit vdrsync sowie das Requantisieren der
    VDR Aufnhamen wird nun mit nice gestartet.
  - NOAD kann jetzt wahlweise im Onlinemodus oder nach jeder Aufnahme
    automatisch gestartet werden.
  - Die Plugins EPG-Search, Femon, Screenshot, Undelete, OSD-Teletext,
                Teletext-Subtitles, DVB-Subtitles, Streamdev
    wurden in ein extra Packet gepackt.
  - Der Channelscan fuer DVB-T/DVB-C wird jetzt mit dem Tool
    w_scan (von Wirbel aus dem VDR-Forum) durchgefuehrt.
    Damit faellt die Auswahl der zu benutzenden DVB Karte weg da
    w_scan den ensprechenden Adatper automatisch findet.
  - Das Plugin FFNetDev ist mit ins Packet gekommen.
  - div. kleine Bugfixes

#-----------------------------------------------------------------------------
# VDR configuration File                                    VDR-Package 0.6.7
#
# Creation:     20.02.2005 Patrick Gniza <pgniza@gmx.de>
# Last Update:  07.07.2005 Patrick Gniza <pgniza@gmx.de>
#
# Copyright (c) 2005 Patrick Gniza <pgniza@gmx.de>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#-----------------------------------------------------------------------------


#-----------------------------------------------------------------------------
# General settings
#-----------------------------------------------------------------------------


START_VDR='yes'                       #  Start VDR at boot-time?


VDR_CONSOLE='7'                       #  Console on which VDR runs,
                                      #  output debugmessage and
                                      #  on which console VDR read
                                      #  keyboardinput as remote-control


VDR_CONSOLE_AUTOSWITCH='yes'          #  Switch to VDR_CONSOLE at VDR start


VDR_DISABLE_CONSOLE_SCREENSAVER='yes' #  Disables the console screensaver


VDR_VIDEO_PATH='/video'               #  Directory to use for VDR recodings


VDR_LOGLEVEL='3'                      #  set VDR log level
                                      #  0 = no logging,
                                      #  1 = errors only,
                                      #  2 = errors and info,
                                      #  3 = errors, info and debug


#-----------------------------------------------------------------------------
# VDR sound settings
#-----------------------------------------------------------------------------


VDR_SOUND_USE_SOUNDCARD_FOR_AC3_PLAYBACK='no'
                                      #  Use Software for AC3 decoding
                                      #  (multichannel soundcard output
                                      #  required Sound-Pakage Driver
                                      #  with supported 5.1 sound)


VDR_SOUND_SOUNDCARD_OUTPUT='analog'   #  Select between:
                                      #  - analog : Use a52dec or ac3dec to
                                      #  decode and send Play AC3
                                      #  data over the local
                                      #  Soundcard (needs ALSA-
                                      #  or OSS-Package)


                                      #  - digital : Use the Bitstreamout
                                      #  Plugin to send AC3 data
                                      #  throug Soundcard
                                      #  (digital out) to an
                                      #  external decoder.
                                      #  Needs ALSA-Package


VDR_SOUND_USE_AVOLCTL_PLUGIN='no'     #  Use the AVolCtl Plugin to control
                                      #  the Volume while AC3 Output




#-----------------------------------------------------------------------------
# VDR recording settings
#-----------------------------------------------------------------------------


VDR_USE_NOAD='yes'                    #  Enable automatic advertising-
                                      #  detection in vdr-recordings


VDR_USE_NOAD_ONLINESCAN='yes'         #  Enable noad onlinescan if is set to
                                      #  no, noad will start when Recording
                                      #  ends


VDR_EXPORT_DIR='/public'              #  Directory where exported MPEG2 or
                                      #  DVD files where saved


VDR_MPEG2_EXPORT_AUTO='no'            #  Enables automatic converting of
                                      #  recordings after editing with VDR
                                      #  to an MPEG2 file in MPEG2_EXPORT_DIR


VDR_REQUANT_AUTO='no'                 #  Enables automaic requant of
                                      #  recordings after recording


VDR_REQUANT_FACTOR='1.3'              #  Requantfactor ( 1.05 - 2.00 )


VDR_REQUANT_ACTION='0'                #  Handlingbehaviour (what sould VDR
                                      #  do with original recording?)
                                      #  valid options:
                                      #  - 0 = result will be of year 2014,
                                      #  original will be kept
                                      #  - 1 = replace orig.with result
                                      #  (mark origiginal as deleted
                                      #  but keep on disc)
                                      #  - 2 = like 1, but mark with ^%
                                      #  instead of %
                                      #  - 3 = like 2 but keeps original
                                      #  recording


#-----------------------------------------------------------------------------
# VDR Status mail settings
#-----------------------------------------------------------------------------


VDR_SEND_MAIL='no'                    #  Enables VDR send status mails
VDR_SEND_ADDR='root@local.lan'        #  send mails at this address
VDR_SEND_AT_RECORDING='stop'          #  send mail if recording
                                      #  (default) - stop
                                      #  - start
                                      #  - both


#-----------------------------------------------------------------------------
# VDR Remote Control
#-----------------------------------------------------------------------------


VDR_REMOTE_CONSOLE_ENABLE='yes'       #  Use the remote plugin to Display VDR
                                      #  OSD on a console
VDR_REMOTE_CONSOLE='8'                #  OSD and remote console


VDR_REMOTE_CONSOLE_AUTOSWITCH='no'    #  Switch to VDR_REMOTE_CONSOLE at start


VDR_REMOTE_DVB_BUILDIN='no'           #  Enables the infrared port of an
                                      #  FF-Technotred DVB-Card


VDR_REMOTE_DVB_BUILDIN_DEV='auto'     #  Configure the buildin DVB-Card ir-
                                      #  reciever select "auto" if ir-reciever
                                      #  not wokrs try out "0" or "1"


VDR_REMOTE_LIRC='no'                  #  Enable LIRC ir-reciever for VDR
                                      #  needs an installed LIRC package


VDR_REMOTE_SERIAL='no'                #  Use serial ir-receivers, like
                                      #  UIRT/irman. Currently it works only
                                      #  with UIRT-receivers and clones
                                      #  (irman, ir2pc)
                                      #  -= NOT LIRC COMPATIBLE =-


VDR_REMOTE_SERIAL_PORT='com1'         #  use COM-Port 'comx' with an serial
                                      #  ir-receiver


VDR_REMOTE_TELNET_ENABLE='yes'        #  Use the control plugin for VDR
VDR_REMOTE_TELNET_PORT='2002'         #  to control the VDR (with OSD )
                                      #  through an telnet session at a
                                      #  defined TCP port


#-----------------------------------------------------------------------------
# VDR Output Devices
#-----------------------------------------------------------------------------


VDR_HAVE_DVB_CARD='no'                #  Do you have an DVB-Card


VDR_DVB_CARD_TYPE='budget'            #  Whith type of DVB-Card?
                                      #  - buget
                                      #  - ff (fullfeatured)


VDR_DXR3_OUTPUT_ENABLE='yes'          #  Enable this plugin to use your
                                      #  DXR3-Card for VDR-Video output.
                                      #  (Requires DXR3 Driver + Modules)


VDR_FF_NETWORK_DEVICE_ENABLE='no'     #  Emulate an output device with
                                      #  OSD-Support an stream
                                      #  OSD an Video data throug network
                                      #  to an client.
                                      #  (OSD-Data and Video-Data where
                                      #  transported seperatly)


VDR_FF_NETWORK_DEVICE_OSD_PORT='20001'
                                      #  Network port where OSD-Data streamed
                                      #  (you can connect with an VNC client
                                      #  to view the OSD)


VDR_FF_NETWORK_DEVICE_VIDEO_PORT='20002'
                                      #  Network port where Video-Data streamed
                                      #  (here you can connect with Mplayer)


VDR_FF_NETWORK_DEVICE_USE_AS_REMOTE='no'
                                      #  You can also use the ffnetdev Plugin
                                      #  as remote contol for VDR.
                                      #  (needs connect with VNC Client to OSD
                                      #  port)


#-----------------------------------------------------------------------------
# end
#-----------------------------------------------------------------------------

#-----------------------------------------------------------------------------
# VDR Streaming configuration File                          VDR-Package 0.0.1
#
# Creation:     20.02.2005 Patrick Gniza <pgniza@gmx.de>
# Last Update:  11.07.2005 Patrick Gniza <pgniza@gmx.de>
#
# Copyright (c) 2005 Patrick Gniza <pgniza@gmx.de>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#-----------------------------------------------------------------------------


#-----------------------------------------------------------------------------
# Streamdev Server
#-----------------------------------------------------------------------------


VDR_STREAMDEVSERVER_ENABLE='no'       #  Enable Streamdev as Output-Device


VDR_STREAMDEVSERVER_HTTPSTREAM_ENABLE='no'
                                      #  Enable http streaming with Steamdev
                                      #  Server Plugin


VDR_STREAMDEVSERVER_HTTPSTREAM_BIND_TO_IP='0.0.0.0'
                                      #  Optional, bind HTTP-Streamdev Server
                                      #  to an IP-address


VDR_STREAMDEVSERVER_HTTPSTREAM_PORT='3000'
                                      #  TCP port where Streamdev Server send
                                      #  http video stream


VDR_STREAMDEVSERVER_HTTPSTREAM_MAXCLIENTS='5'
                                      #  Max. number of clients can connect at
                                      #  the same time to Streamdev Server


VDR_STREAMDEVSERVER_VDR_STREAM_ENABLE='no'
                                      #  Enable VDR-to-VDR streaming with
                                      #  Steamdev Server Plugin


VDR_STREAMDEVSERVER_VDR_STREAM_BIND_TO_IP='0.0.0.0'
                                      #  Optional, bind VDR-to-VDR Streamdev
                                      #  Server to an IP-address


VDR_STREAMDEVSERVER_VDR_STREAM_PORT='2004'
                                      #  TCP port for VDR-to-VDR connection


VDR_STREAMDEVSERVER_SUPEND_AT_CLIENTCONNECT='no'
                                      #  If only one DVB-Card is installed
                                      #  you can set suspend at client
                                      #  connect to "yes" or you can only
                                      #  tune at the client to the same
                                      #  transponder wich is currently
                                      #  tuned at the server


#-----------------------------------------------------------------------------
# Streamdev Client
#-----------------------------------------------------------------------------


VDR_STREAMDEVCLIENT_ENABLE='yes'       #  Enable Streamdev as Input-Device
VDR_STREAMDEVCLIENT_SERVER='192.168.6.1'
                                      #  Host IP of VDR-Stremdevserver to use


VDR_STREAMDEVCLIENT_SERVER_PORT='2004'
                                      #  TCP port witch Streamdev Server use
                                      #  for VDR-to-VDR connection


VDR_STREAMDEVCLIENT_SYNC_EPG='yes'     #  Enable to use remote EPG


#-----------------------------------------------------------------------------
# end
#-----------------------------------------------------------------------------

#!/bin/sh
#------------------------------------------------------------------------------------------------------
# VDR-Plugin activation and configuration script
#
# Copyright (c) 2005 Patrick Gniza <pgniza@gmx.de>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#------------------------------------------------------------------------------------------------------


PLUGIN_VERSION='1.3.27'
PLUGIN_VDR_PATCHLEVEL='2'


if [ "$VDR_VERSION" = "$PLUGIN_VERSION" -a "$VDR_PACKAGE_PATCHLEVEL" = "$PLUGIN_VDR_PATCHLEVEL" ]
  then
   if [ "$VDR_DXR3_OUTPUT_ENABLE" = "yes" ]
     then
      mecho "       - loading configuration for DXR3-Device Plugin"
      DXR3_NEED_TO_START=1
      add_plugin dxr3 $DEFAULT_OUTPUTDEV_PRIO
   fi


   if [ "$VDR_DXR3_OUTPUT_ENABLE" = "no" -a "$VDR_HAVE_DVB_CARD" = "no" ]
     then
      mecho "       - loading configuration for Dummy-Device Plugin"
      add_plugin dummydevice "" `expr $DEFAULT_OUTPUTDEV_PRIO + 3`
   fi


   if [ "$VDR_FF_NETWORK_DEVICE_ENABLE" = "yes" ]
     then
      mecho "       - loading configuration for FF-NetDev Plugin"
      if [ "$VDR_FF_NETWORK_DEVICE_USE_AS_REMOTE" = "yes" ]
        then
         write_remote_conf ffnetdev
         VDR_FF_NETWORK_DEVICE_REMOTE_STR="-e"
        else
         VDR_FF_NETWORK_DEVICE_REMOTE_STR=""
      fi
      if [ "$VDR_DXR3_OUTPUT_ENABLE" = "yes" ]
        then
         FF_NET_DEV_PRIO=`expr $DEFAULT_OUTPUTDEV_PRIO + 2`
      elif [ "$VDR_HAVE_DVB_CARD" = "yes" -a "$VDR_DVB_CARD_TYPE" = "ff" ]
        then
         FF_NET_DEV_PRIO=`expr $DEFAULT_OUTPUTDEV_PRIO + 2`
        else
         FF_NET_DEV_PRIO=$DEFAULT_OUTPUTDEV_PRIO
      fi
      add_plugin ffnetdev "-o $VDR_FF_NETWORK_DEVICE_OSD_PORT -t $VDR_FF_NETWORK_DEVICE_VIDEO_PORT $VDR_FF_NETWORK_DEVICE_REMOTE_STR" $FF_NET_DEV_PRIO
   fi
  else
   mecho -error "Output Devices Plugin Package Version are not compatible"
   mecho -error "to VDR Package Version"
   mecho -error "Could not load buildin Packages"
fi