STM32F103

openocd -f ocd-program.cfg
Open On-Chip Debugger 0.12.0-01004-g9ea7f3d64-dirty (2025-11-12-08:18)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VID:PID 0483:3748
Info : Target voltage: 3.308108
Info : [stm32f1x.cpu] Cortex-M3 r2p0 processor detected
Info : [stm32f1x.cpu] target has 6 breakpoints, 4 watchpoints
Info : starting gdb server for stm32f1x.cpu on 3333
Info : Listening on port 3333 for gdb connections
[stm32f1x.cpu] halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x0800111c msp: 0x20005000
** Programming Started **
Info : device id = 0x20030410
Info : flash size = 128 KiB
Warn : Adding extra erase range, 0x08001c30 .. 0x08001fff
** Programming Finished **
** Verify Started **
** Verified OK **

./stm32FWupgrade ../../../IRMP_STM32/binaries/firmware_for_bootloader/2024-01-19_23-59_F103CC_blueDev_BL_jrie.bin

=== STM32 Firmware Upgrade Utility ===

opened firmware file ../../../IRMP_STM32/binaries/firmware_for_bootloader/2024-01-19_23-59_F103CC_blueDev_BL_jrie.bin
read 25744 bytes of firmware
Waiting for device ...
Found device at 1:7
wTransfer Size = 1024
Progress: 3%
Progress: 7%
Progress: 11%
Progress: 15%
Progress: 19%
Progress: 23%
Progress: 27%
Progress: 31%
Progress: 35%
Progress: 39%
Progress: 43%
Progress: 47%
Progress: 51%
Progress: 55%
Progress: 59%
Progress: 63%
Progress: 67%
Progress: 71%
Progress: 75%
Progress: 79%
Progress: 83%
Progress: 87%
Progress: 91%
Progress: 95%
Progress: 99%
Progress: 100%

=== Firmware Upgrade successful! ===