minisatip satip Fragen

SHF · May 28, 2025 at 11:01 PM

Quote from cinfo

so sieht es auch aus wenn man zu oft minisatip am System gestartet hat ...

Aber auch da müsste man eigentlich irgendwas mit netstat finden.
Zumindest wäre es mir nicht bekannt, wie man von außen her das öffnen eines Netzwerkports verhindern kann.

Quote from cinfo

(einfach mal sauber prüfen ---> ISO starten Service vdr stoppen ---> minisatip von der Konsole aus starten ---> Service vdr wieder starten ....)

Ich nahm an, der Log aus #17 wäre so erstellt worden.
Aber bei so eine Timing-Geschichte kann natürlich was schief gelaufen sein...

Quote from gggggg

syslog mit allen debug Optionen v. minisatip im Anhang.

Eine Fehlermeldung sehe ich da jetzt nicht mehr.

Die Ausgaben von netstat sehen für mich auch unauffällig aus.
(Die Zeilen ohne pid/Name müssten vom Kernel-NTP-Server sein.)
Multicastrouten auf eth0.2 konnten auch gesetzt werden.

cinfo · May 31, 2025 at 11:07 AM

gggggg ich gehe davon aus das sich alles nach Deinen Wünschen läuft und sich diese Thema erledigt hat.

Bin dann bis Juli im Urlaub

gggggg · June 2, 2025 at 7:46 AM

Leider NEIN, bin nur z.Z sehr eingespannt ... schönen U

gggggg · July 26, 2025 at 11:48 AM

So ich bin im Urlaub u versuche nochmal mein Glück. Bitte nochmal um eure Xcoder SHF cinfo pbrb Unterstützung: Den vdr habe ich dazu gestoppt:

13.114 main]: Starting select_and_execute on thread ID 7fd32865ba80, thread_name main
43.169 AD0]: Requested adapter 0 close due to timeout 30 sec, result 1 max_rtime 2581

Nach 30s ist Schluß ...

Code

minisatip -n eth0.2:1  -b 15640  –t -f -l -l -l
12.588 main]: The LOG option has changed, please run ./minisatip -h
minisatip: option requires an argument -- 'l'
12.588 main]: Listening configuration RTSP:10.75.25.23:554 (bind address: (null)), HTTP:10.75.25.23:8080 (bind address: (null))
12.588 main]: Running mode: foreground
12.588 main]: minisatip version 1.3.48~b87a97c, compiled on May 14 2025 16:28:23, with s2api version: 050C
12.588 main]: Built with dvbcsa
12.588 main]: Built with CI
12.588 main]: Built with dvbapi
12.588 main]: Built with tables processing
12.588 main]: Built with pmt processing
12.588 main]: Built with satip client
12.588 main]: Built with linux dvb client
12.588 main]: Built with backtrace
12.588 main]: Built with netceiver
12.588 main]: Built with ddci
12.588 main]: Built without t2mi
12.588 main]: Command line: minisatip -n eth0.2:1 -b 15640 –t -f -l -l -l
12.588 main]:  LOG  of the module enabled: general
12.588 main]:  LOG  of the module enabled: http
12.588 main]: Initial values bootid 0, device_id 0, UUID  (reading new from /var/cache/minisatip/bootid)
12.588 main]: Running with bootid 31, device_id 1, UUID 15c97e8f-6f6a-37cc-2a89-fab63dd42ada
12.588 main]: New TCP listening socket 3 at 0:0:0:0:554, family 2
12.588 main]: New TCP listening socket 4 at 0:0:0:0:8080, family 2
12.588 main]: New UDP socket 5 bound to 0.0.0.0:1900
12.588 main]: setting multicast for 239.255.255.250
12.588 main]: New UDP socket 6 bound to 239.255.255.250:1900 (mcast:239.255.255.250)
12.588 main]: sockets_add: handle 5 (type 0) returning socket sock 0 [:0] read: 0x55dae957c1d0
12.588 main]: sockets_add: handle 6 (type 0) returning socket sock 1 [:0] read: 0x55dae957c1d0
12.588 main]: sockets_add: handle 3 (type 2) returning socket sock 2 [:0] read: 0x55dae957f300
12.588 main]: sockets_add: handle 4 (type 2) returning socket sock 3 [:0] read: 0x55dae957f300
12.588 main]: sockets_add: handle -2 (type 0) returning socket sock 4 [:0] read: 0x55dae957c1d0
12.589 main]: set_socket_thread: thread 7fd3259ff640 for sockets 4
12.589 signal]: Starting select_and_execute on thread ID 7fd3259ff640, thread_name signal
12.589 signal]: sockets_add: handle -2 (type 0) returning socket sock 5 [:0] read: 0x55dae957c1d0
12.589 signal]: set_socket_thread: thread 7fd3259ff640 for sockets 5
12.589 signal]: sockets_add: handle -2 (type 0) returning socket sock 6 [:0] read: 0x55dae957c1d0
12.589 signal]: set_socket_thread: thread 7fd3251fe640 for sockets 6
12.589 signal]: sockets_add: handle -2 (type 0) returning socket sock 7 [:0] read: 0x55dae957c1d0
12.589 signal]: starting init_all_hw 0
12.589 CA_poll]: Starting select_and_execute on thread ID 7fd3251fe640, thread_name CA_poll
13.102 signal]: REEL: Search for 1 Netceiver on eth0.2... ####
Found NetCeiver: fe80::208:54ff:fe54:b261
        Tuner: Conexant CX24116 DVB-S2, Type 4
        Tuner: Conexant CX24116 DVB-S2, Type 4
        Tuner: Conexant CX24116 DVB-S2, Type 4
        Tuner: Conexant CX24116 DVB-S2, Type 4
        Tuner: Conexant CX24116 DVB-S2, Type 4
        Tuner: Conexant CX24116 DVB-S2, Type 4

13.102 signal]: netceiver: adding [AD0 DVB-S2] [AD1 DVB-S2] [AD2 DVB-S2] [AD3 DVB-S2] [AD4 DVB-S2] [AD5 DVB-S2]
13.114 signal]: netceiver: creating DVR pipe for adapter 0  -> dvr: 11
13.114 signal]: deleting pids on adapter 0, sid -1, pids=NULL
13.114 signal]: sockets_add: handle 11 (type 5) returning socket sock 8 [:0] read: 0x55dae957c160
13.114 signal]: set_socket_thread: thread 7fd31e7fc640 for sockets 8
13.114 signal]: done opening adapter 0 delivery systems: dvbs2 dvbs undefined undefined
13.114 signal]: FE 1 mapped to Adapter 0, sys dvbs2
13.114 signal]: FE 2 mapped to Adapter 1, sys dvbs2
13.114 signal]: FE 3 mapped to Adapter 2, sys dvbs2
13.114 signal]: FE 4 mapped to Adapter 3, sys dvbs2
13.114 signal]: FE 5 mapped to Adapter 4, sys dvbs2
13.114 signal]: FE 6 mapped to Adapter 5, sys dvbs2
13.114 AD0]: Starting select_and_execute on thread ID 7fd31e7fc640, thread_name AD0
13.114 signal]: netceiver: creating DVR pipe for adapter 1  -> dvr: 13
13.114 signal]: deleting pids on adapter 1, sid -1, pids=NULL
13.114 signal]: sockets_add: handle 13 (type 5) returning socket sock 9 [:0] read: 0x55dae957c160
13.114 signal]: set_socket_thread: thread 7fd31dffb640 for sockets 9
13.114 signal]: done opening adapter 1 delivery systems: dvbs2 dvbs undefined undefined
13.114 signal]: netceiver: creating DVR pipe for adapter 2  -> dvr: 15
13.114 signal]: deleting pids on adapter 2, sid -1, pids=NULL
13.114 signal]: sockets_add: handle 15 (type 5) returning socket sock 10 [:0] read: 0x55dae957c160
13.114 signal]: set_socket_thread: thread 7fd31d7fa640 for sockets 10
13.114 signal]: done opening adapter 2 delivery systems: dvbs2 dvbs undefined undefined
13.114 AD2]: Starting select_and_execute on thread ID 7fd31d7fa640, thread_name AD2
13.114 signal]: netceiver: creating DVR pipe for adapter 3  -> dvr: 17
13.114 AD1]: Starting select_and_execute on thread ID 7fd31dffb640, thread_name AD1
13.114 signal]: deleting pids on adapter 3, sid -1, pids=NULL
13.114 signal]: sockets_add: handle 17 (type 5) returning socket sock 11 [:0] read: 0x55dae957c160
13.114 signal]: set_socket_thread: thread 7fd31cff9640 for sockets 11
13.114 signal]: done opening adapter 3 delivery systems: dvbs2 dvbs undefined undefined
13.114 AD3]: Starting select_and_execute on thread ID 7fd31cff9640, thread_name AD3
13.114 signal]: netceiver: creating DVR pipe for adapter 4  -> dvr: 19
13.114 signal]: deleting pids on adapter 4, sid -1, pids=NULL
13.114 signal]: sockets_add: handle 19 (type 5) returning socket sock 12 [:0] read: 0x55dae957c160
13.114 signal]: set_socket_thread: thread 7fd303fff640 for sockets 12
13.114 signal]: done opening adapter 4 delivery systems: dvbs2 dvbs undefined undefined
13.114 AD4]: Starting select_and_execute on thread ID 7fd303fff640, thread_name AD4
13.114 signal]: netceiver: creating DVR pipe for adapter 5  -> dvr: 21
13.114 signal]: deleting pids on adapter 5, sid -1, pids=NULL
13.114 signal]: sockets_add: handle 21 (type 5) returning socket sock 13 [:0] read: 0x55dae957c160
13.114 signal]: set_socket_thread: thread 7fd3037fe640 for sockets 13
13.114 signal]: done opening adapter 5 delivery systems: dvbs2 dvbs undefined undefined
13.114 signal]: done init_hw 1
13.114 signal]: Initializing with 6 devices
13.114 AD5]: Starting select_and_execute on thread ID 7fd3037fe640, thread_name AD5
13.114 main]: Starting select_and_execute on thread ID 7fd32865ba80, thread_name main
43.169 AD0]: Requested adapter 0 close due to timeout 30 sec, result 1 max_rtime 2581
43.169 AD0]: closing DVR socket 11 pos 8 aid 0
43.169 AD0]: closing adapter 0  -> fe:0 dvr:11, sock:8, fe_sock:-1
43.169 AD0]: deleting pids on adapter 0, sid -1, pids=NULL
43.169 AD1]: Requested adapter 1 close due to timeout 30 sec, result 1 max_rtime 2581
43.169 AD4]: Requested adapter 4 close due to timeout 30 sec, result 1 max_rtime 2581
43.169 AD4]: closing DVR socket 19 pos 12 aid 4
43.169 AD4]: closing adapter 4  -> fe:0 dvr:19, sock:12, fe_sock:-1
43.169 AD4]: deleting pids on adapter 4, sid -1, pids=NULL
43.169 AD4]: netceiver: receiver instance is NULL (id=4)
43.169 AD4]: netceiver: delete receiver instance for adapter 4
RECEIVED SIGNAL 11 - SP=0 IP=0
43.169 AD1]: closing DVR socket 13 pos 9 aid 1
43.169 AD1]: closing adapter 1  -> fe:0 dvr:13, sock:9, fe_sock:-1
43.169 AD1]: deleting pids on adapter 1, sid -1, pids=NULL
43.169 AD1]: netceiver: receiver instance is NULL (id=1)
43.169 AD1]: netceiver: delete receiver instance for adapter 1
Obtained 10 stack frames.
0x55dae959182e : RECEIVED SIGNAL 11 - SP=0 IP=0
43.169 AD5]: Requested adapter 5 close due to timeout 30 sec, result 1 max_rtime 2581
Obtained 10 stack frames.
0x55dae959182e : 43.169 AD5]: closing DVR socket 21 pos 13 aid 5
43.169 AD5]: closing adapter 5  -> fe:0 dvr:21, sock:13, fe_sock:-1
43.169 AD5]: deleting pids on adapter 5, sid -1, pids=NULL
43.169 AD5]: netceiver: receiver instance is NULL (id=5)
43.169 AD5]: netceiver: delete receiver instance for adapter 5
RECEIVED SIGNAL 11 - SP=0 IP=0
Obtained 10 stack frames.
0x55dae959182e : 43.169 AD3]: Requested adapter 3 close due to timeout 30 sec, result 1 max_rtime 2581
43.169 AD3]: closing DVR socket 17 pos 11 aid 3
43.169 AD3]: closing adapter 3  -> fe:0 dvr:17, sock:11, fe_sock:-1
43.169 AD3]: deleting pids on adapter 3, sid -1, pids=NULL
43.169 AD3]: netceiver: receiver instance is NULL (id=3)
43.169 AD3]: netceiver: delete receiver instance for adapter 3
RECEIVED SIGNAL 11 - SP=0 IP=0
Obtained 10 stack frames.
addr2line: addr2line: ‚minisatip‛: Keine solche Datei
‚minisatip‛: Keine solche Datei
addr2line: addr2line: ‚minisatip‛: Keine solche Datei‚minisatip‛: Keine solche Datei0x55dae959182e : 43.172 AD0]: netceiver: receiver instance is NULL (id=0)
43.172 AD0]: netceiver: delete receiver instance for adapter 0
RECEIVED SIGNAL 11 - SP=0 IP=0
Obtained 10 stack frames.
0x55dae959182e :
0x55dae959190c : 43.172 AD2]: Requested adapter 2 close due to timeout 30 sec, result 1 max_rtime 2581

43.172 AD2]: closing DVR socket 15 pos 10 aid 2
43.172 AD2]: closing adapter 2  -> fe:0 dvr:15, sock:10, fe_sock:-1
43.172 AD2]: deleting pids on adapter 2, sid -1, pids=NULL
43.172 AD2]: netceiver: receiver instance is NULL (id=2)
43.172 AD2]: netceiver: delete receiver instance for adapter 2
RECEIVED SIGNAL 11 - SP=0 IP=0
Obtained 10 stack frames.
0x55dae959182e :
0x55dae959190c :

0x55dae959190c :
addr2line: ‚minisatip‛: Keine solche Datei

Display More

cinfo · July 26, 2025 at 12:47 PM

....

gggggg · July 26, 2025 at 1:49 PM

.

M-Reimer · July 26, 2025 at 2:15 PM

Bitte mich nicht mehr pingen. Danke.

gggggg · July 26, 2025 at 5:15 PM

Bisher hatte ich das sat-ip plugin nicht aktiviert. Ev. was das der Grund warum minisatip ins timeout lief. Nun also mit dem SAT-IP plugin. Ich habe in der consol minisatip gestatet und dann den vdr service.

es beginnt vielverspechend:

Code

34.098 signal]: Initializing with 6 devices
34.098 main]: Starting select_and_execute on thread ID 7f69db44fa80, thread_name main
34.098 main]: sockets_add: handle 23 (type 1) returning socket sock 14 [127.0.0.1:58938] read: 0x556b9931b160
34.098 main]: minisatip.c:1215 get_sid returns NULL for s_id = -1
34.098 main]: Read RTSP (sock 14, handle 23) [127.0.0.1:58938] sid -1, len: 97
34.098 main]: MSG client >> process :
OPTIONS rtsp://127.0.0.1/ RTSP/1.0
CSeq: 1
User-Agent: vdr-satip/20240224-BM2LTS (device 0)

dann kommen hier am Ende einige mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
und am Ende mcli::recv_ts_func: Transport error indicator set on receiver 0x556bc0a4da80 for pid 2824: -1->0 at pos 0/4

Code

PLAY rtsp://127.0.0.1/stream=1?addpids=3327,3328 RTSP/1.0
CSeq: 4
Session: 1804289383
User-Agent: vdr-satip/20240224-BM2LTS (device 0)


43.551 main]: detect_dvb_parameters (S)-> addpids=3327,3328
43.551 main]: detect_dvb_parameters (E) -> src=-1, fe=-1, freq=-1, fec=-1, sr=-1, pol=-1, ro=-1, msys=-1, mtype=-1, plts=-1, bw=-1, inv=-1, pids=NULL - apids=3327,3328 - dpids=NULL x_pmt=NULL
43.551 main]: Setup stream sid 0 parameters, sock_id 14, handle 23
43.551 main]: copy_dvb_param start -> src=1, fe=0, freq=12480000, fec=3, sr=27500000, pol=1, ro=0, msys=5, mtype=0, plts=1, bw=8000000, inv=2, pids=NULL, apids=NULL, dpids=NULL x_pmt=NULL
43.551 main]: copy_dvb_parameters -> src=1, fe=0, freq=12480000, fec=3 sr=27500000, pol=1, ro=0, msys=5, mtype=0, plts=1, bw=8000000, inv=2, pids=NULL, apids=3327,3328, dpids=NULL x_pmt=NULL
43.551 main]: Updating sid 0 time to 14478, current time 14478
43.551 main]: Play for stream sid 0, type 2, rsock 24, adapter -1, sock_id 14, rsock_id 16, handle 23
43.551 main]: stream.c:262: get_adapter returns NULL for adapter_id -1
43.551 main]: adapter.c:1233: get_adapter returns NULL for adapter_id -1
43.551 main]: stream.c:271: get_adapter returns NULL for adapter_id -1
43.551 main]: get _free adapter 0 - a[0] => e:1 m:-1 sid_cnt:0 src:0 f:0 pol=0 sys: dvbs2 dvbs
43.551 main]: Dumping adapters:
43.551 main]: 0|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
43.551 main]: 1|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
43.551 main]: 2|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
43.551 main]: 3|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
43.551 main]: 4|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
43.551 main]: 5|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
43.551 main]: Dumping streams:
43.551 main]: 0|  a:-1 rsock:24 type:2 play:0 remote:127.0.0.1:55316
43.551 main]: Got adapter 0 on sid 0 socket 14
43.551 main]: set adapter 0 for sid 0 m:0 s:1
43.551 main]: setting DVB parameters for adapter 0 - master_sid 0 sid 0 old f:0
43.551 main]: deleting pids on adapter 0, sid -1, pids=NULL
43.551 main]: copy_dvb_param start -> src=0, fe=0, freq=0, fec=9, sr=0, pol=0, ro=3, msys=0, mtype=6, plts=2, bw=8000000, inv=2, pids=NULL, apids=NULL, dpids=NULL x_pmt=NULL
43.551 main]: copy_dvb_parameters -> src=1, fe=0, freq=12480000, fec=3 sr=27500000, pol=1, ro=0, msys=5, mtype=0, plts=1, bw=8000000, inv=2, pids=NULL, apids=3327,3328, dpids=NULL x_pmt=NULL
43.551 main]: adding pids to adapter 0, sid 0, pids=3327,3328
43.551 main]: set_socket_thread: thread 7f69d57f9640 for sockets 15
43.551 main]: Adding pid 0 to the list of pids as not explicitly added for adapter 0
43.551 main]: Adding pid 1 to the list of pids as not explicitly added for adapter 0
43.551 main]: Adding pid 16 to the list of pids as not explicitly added for adapter 0
43.551 main]: Adding pid 18 to the list of pids as not explicitly added for adapter 0
43.551 main]: new filter 0 added for adapter 0, pid 0, flags 20, mask_len 0, master_filter 0
43.551 main]: new filter 1 added for adapter 0, pid 17, flags 20, mask_len 0, master_filter 1
43.551 main]: Dumping pids table for adapter 0, number of unknown pids: 0
43.551 main]: pid 3327, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
43.551 main]: pid 3328, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
43.551 main]: pid 0, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter 0, sock -1, p2 0, sids: -1 -1 -1 -1 -1 -1 -1 -1
43.551 main]: pid 1, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: -1 -1 -1 -1 -1 -1 -1 -1
43.551 main]: pid 16, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: -1 -1 -1 -1 -1 -1 -1 -1
43.551 main]: pid 18, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: -1 -1 -1 -1 -1 -1 -1 -1
43.551 main]: netceiver: set_pid for adapter 0, pid 3327, err 0
43.551 main]: netceiver: set_pid for adapter 0, pid 3328, err 0
43.551 main]: netceiver: set_pid for adapter 0, pid 0, err 0
43.551 main]: netceiver: set_pid for adapter 0, pid 1, err 0
43.551 main]: netceiver: set_pid for adapter 0, pid 16, err 0
43.551 main]: netceiver: set_pid for adapter 0, pid 18, err 0
43.551 main]: netceiver: add a new receiver instance for adapter 0
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
recv_ten: client_udp_open error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
43.571 main]: Reply (handle 23) [127.0.0.1:53438] content_len:0, sock 14
43.571 main]: MSG client << process :
RTSP/1.0 200 OK
Date: Sat, Jul 26 14:50:43 2025 GMT
Session: 1804289383
CSeq: 4
Server: minisatip/1.3.48~b87a97c
RTP-Info: url=rtsp://127.0.0.1/stream=1;seq=0;rtptime=403
Range: npt=0.000-


mcli::recv_ts_func: Transport error indicator set on receiver 0x556bc0a4da80 for pid 2824: -1->0 at pos 0/4
mcli::recv_ts_func: Transport error indicator set on receiver 0x556bc0a4da80 for pid 2162: 0->12 at pos 1/4
mcli::recv_ts_func: Transport error indicator set on receiver 0x556bc0a4da80 for pid 904: 12->13 at pos 2/4
mcli::recv_ts_func: Received 770 bytes is not multiple of 188!
43.773 main]: netceiver: TS data mallformed: buf[0]=0x1f len=770
mcli::recv_ts_func: Transport error indicator set on receiver 0x556bc0a4da80 for pid 2824: 12->0 at pos 0/8
mcli::recv_ts_func: Transport error indicator set on receiver 0x556bc0a4da80 for pid 1935: 0->8 at pos 1/8
mcli::recv_ts_func: Discontinuity on receiver 0x556bc0a4da80 for pid 7239: 8->1 at pos 2/8
mcli::recv_ts_func: Transport error indicator set on receiver 0x556bc0a4da80 for pid 7239: 8->1 at pos 2/8
43.774 main]: netceiver: TS data mallformed: buf[0]=0x1f len=1504
43.822 main]: Read RTSP (sock 14, handle 23) [127.0.0.1:53438] sid 0, len: 148
43.822 main]: MSG client >> process :
PLAY rtsp://127.0.0.1/stream=1?addpids=0,16,17,18,20,44 RTSP/1.0

Display More

dann beginnt der nächste Versuch ... siehe angehängts log

gggggg · July 26, 2025 at 5:26 PM

Hier noch ein Versuch mit dem vlc: rtsp://10.....:554/?src=1&freq=11493&pol=h&sr=22000&msys=dvbs2&pids=0,5100,5101,5102,5103,5107,5106,5104

Code

SETUP rtsp://10.75.25.23/stream=1 RTSP/1.0
CSeq: 4
User-Agent: LibVLC/3.0.8 (LIVE555 Streaming Media v2016.11.28)
Transport: RTP/AVP;unicast;client_port=55852-55853


10.298 main]: Updating sid 0 time to 5028, current time 5028
10.298 main]: decode_transport ->type 2, ttl 0 new socket to: 10.75.25.20:55852
10.298 main]: New UDP socket 24 bound to 0.0.0.0:5500
10.298 main]: New UDP socket 24 connected to 10.75.25.20:55852
10.298 main]: sockets_add: handle 24 (type 0) returning socket sock 16 [10.75.25.20:55852] read: 0x56348929f1d0
10.298 main]: New UDP socket 25 bound to 0.0.0.0:5501
10.298 main]: New UDP socket 25 connected to 10.75.25.20:55853
10.298 main]: sockets_add: handle 25 (type 6) returning socket sock 17 [10.75.25.20:55853] read: 0x56348929f1d0
10.298 main]: Reply (handle 23) [10.75.25.20:65015] content_len:0, sock 14
10.298 main]: MSG client << process :
RTSP/1.0 200 OK
Date: Sat, Jul 26 15:21:10 2025 GMT
CSeq: 4
Server: minisatip/1.3.48~b87a97c
Transport: RTP/AVP;unicast;destination=10.75.25.20;source=10.75.25.23;client_port=55852-55853;server_port=5500-5501
Session: 1804289383;timeout=30
com.ses.streamID: 1


10.300 main]: rtcp_confirm: called for stream sid 0 from 10.75.25.20:55853
Message repeated 1 times
10.300 main]: Read RTSP (sock 14, handle 23) [10.75.25.20:65015] sid 0, len: 158
10.300 main]: MSG client >> process :
PLAY rtsp://10.75.25.23/stream=1 RTSP/1.0
CSeq: 5
User-Agent: LibVLC/3.0.8 (LIVE555 Streaming Media v2016.11.28)
Session: 1804289383
Range: npt=0.000-


10.300 main]: Updating sid 0 time to 5030, current time 5030
10.300 main]: Play for stream sid 0, type 2, rsock 24, adapter -1, sock_id 14, rsock_id 16, handle 23
10.300 main]: stream.c:262: get_adapter returns NULL for adapter_id -1
10.300 main]: adapter.c:1233: get_adapter returns NULL for adapter_id -1
10.300 main]: stream.c:271: get_adapter returns NULL for adapter_id -1
10.300 main]: get _free adapter 0 - a[0] => e:1 m:-1 sid_cnt:0 src:0 f:0 pol=0 sys: dvbs2 dvbs
10.300 main]: Dumping adapters:
10.300 main]: 0|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
10.300 main]: 1|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
10.300 main]: 2|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
10.300 main]: 3|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
10.300 main]: 4|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
10.300 main]: 5|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
10.300 main]: Dumping streams:
10.300 main]: 0|  a:-1 rsock:24 type:2 play:0 remote:10.75.25.20:55852
10.300 main]: Got adapter 0 on sid 0 socket 14
10.300 main]: set adapter 0 for sid 0 m:0 s:1
10.300 main]: setting DVB parameters for adapter 0 - master_sid 0 sid 0 old f:0
10.300 main]: deleting pids on adapter 0, sid -1, pids=NULL
10.300 main]: copy_dvb_param start -> src=0, fe=0, freq=0, fec=9, sr=0, pol=0, ro=3, msys=0, mtype=6, plts=2, bw=8000000, inv=2, pids=NULL, apids=NULL, dpids=NULL x_pmt=NULL
10.300 main]: copy_dvb_parameters -> src=1, fe=0, freq=11493000, fec=9 sr=22000000, pol=2, ro=3, msys=6, mtype=6, plts=2, bw=8000000, inv=2, pids=0,5100,5101,5102,5103,5107,5106,5104, apids=NULL, dpids=NULL x_pmt=NULL
10.300 main]: deleting pids on adapter 0, sid 0, pids=NULL
10.300 main]: adding pids to adapter 0, sid 0, pids=0,5100,5101,5102,5103,5107,5106,5104
10.300 main]: set_socket_thread: thread 7f61f17fa640 for sockets 15
10.300 main]: Adding pid 1 to the list of pids as not explicitly added for adapter 0
10.300 main]: Adding pid 16 to the list of pids as not explicitly added for adapter 0
10.300 main]: Adding pid 18 to the list of pids as not explicitly added for adapter 0
10.300 main]: new filter 0 added for adapter 0, pid 0, flags 20, mask_len 0, master_filter 0
10.300 main]: new filter 1 added for adapter 0, pid 17, flags 20, mask_len 0, master_filter 1
10.300 main]: Dumping pids table for adapter 0, number of unknown pids: 0
10.300 main]: pid 0, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter 0, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5100, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5101, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5102, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5103, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5107, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5106, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5104, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 1, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: -1 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 16, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: -1 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 18, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: -1 -1 -1 -1 -1 -1 -1 -1
10.300 main]: netceiver: set_pid for adapter 0, pid 0, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5100, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5101, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5102, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5103, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5107, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5106, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5104, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 1, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 16, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 18, err 0
10.300 main]: netceiver: add a new receiver instance for adapter 0
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
recv_ten: client_udp_open error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
10.321 main]: Reply (handle 23) [10.75.25.20:65015] content_len:0, sock 14
10.321 main]: MSG client << process :
RTSP/1.0 200 OK
Date: Sat, Jul 26 15:21:10 2025 GMT
Session: 1804289383
CSeq: 5
Server: minisatip/1.3.48~b87a97c
RTP-Info: url=rtsp://10.75.25.23/stream=1;seq=0;rtptime=2230
Range: npt=0.000-


11.396 AD0]: no data sent for more than 1s sid: 0 for 10.75.25.20:55852
11.396 AD0]: Start streaming for stream sid 0, len 12 to handle 24 => 10.75.25.20:55852
mcli::recv_ts_func: Transport error indicator set on receiver 0x5634c3ea2a80 for pid 2824: -1->0 at pos 0/4
mcli::recv_ts_func: Transport error indicator set on receiver 0x5634c3ea2a80 for pid 2162: 0->12 at pos 1/4
mcli::recv_ts_func: Transport error indicator set on receiver 0x5634c3ea2a80 for pid 904: 12->13 at pos 2/4
mcli::recv_ts_func: Received 770 bytes is not multiple of 188!
12.165 main]: netceiver: TS data mallformed: buf[0]=0x1f len=770

Display More

rfehr · July 26, 2025 at 7:08 PM

Quote from gggggg

Hier noch ein Versuch mit dem vlc: rtsp://10.....:554/?src=1&freq=11493&pol=h&sr=22000&msys=dvbs2&pids=0,5100,5101,5102,5103,5107,5106,5104

Code

SETUP rtsp://10.75.25.23/stream=1 RTSP/1.0
CSeq: 4
User-Agent: LibVLC/3.0.8 (LIVE555 Streaming Media v2016.11.28)
Transport: RTP/AVP;unicast;client_port=55852-55853


10.298 main]: Updating sid 0 time to 5028, current time 5028
10.298 main]: decode_transport ->type 2, ttl 0 new socket to: 10.75.25.20:55852
10.298 main]: New UDP socket 24 bound to 0.0.0.0:5500
10.298 main]: New UDP socket 24 connected to 10.75.25.20:55852
10.298 main]: sockets_add: handle 24 (type 0) returning socket sock 16 [10.75.25.20:55852] read: 0x56348929f1d0
10.298 main]: New UDP socket 25 bound to 0.0.0.0:5501
10.298 main]: New UDP socket 25 connected to 10.75.25.20:55853
10.298 main]: sockets_add: handle 25 (type 6) returning socket sock 17 [10.75.25.20:55853] read: 0x56348929f1d0
10.298 main]: Reply (handle 23) [10.75.25.20:65015] content_len:0, sock 14
10.298 main]: MSG client << process :
RTSP/1.0 200 OK
Date: Sat, Jul 26 15:21:10 2025 GMT
CSeq: 4
Server: minisatip/1.3.48~b87a97c
Transport: RTP/AVP;unicast;destination=10.75.25.20;source=10.75.25.23;client_port=55852-55853;server_port=5500-5501
Session: 1804289383;timeout=30
com.ses.streamID: 1


10.300 main]: rtcp_confirm: called for stream sid 0 from 10.75.25.20:55853
Message repeated 1 times
10.300 main]: Read RTSP (sock 14, handle 23) [10.75.25.20:65015] sid 0, len: 158
10.300 main]: MSG client >> process :
PLAY rtsp://10.75.25.23/stream=1 RTSP/1.0
CSeq: 5
User-Agent: LibVLC/3.0.8 (LIVE555 Streaming Media v2016.11.28)
Session: 1804289383
Range: npt=0.000-


10.300 main]: Updating sid 0 time to 5030, current time 5030
10.300 main]: Play for stream sid 0, type 2, rsock 24, adapter -1, sock_id 14, rsock_id 16, handle 23
10.300 main]: stream.c:262: get_adapter returns NULL for adapter_id -1
10.300 main]: adapter.c:1233: get_adapter returns NULL for adapter_id -1
10.300 main]: stream.c:271: get_adapter returns NULL for adapter_id -1
10.300 main]: get _free adapter 0 - a[0] => e:1 m:-1 sid_cnt:0 src:0 f:0 pol=0 sys: dvbs2 dvbs
10.300 main]: Dumping adapters:
10.300 main]: 0|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
10.300 main]: 1|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
10.300 main]: 2|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
10.300 main]: 3|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
10.300 main]: 4|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
10.300 main]: 5|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
10.300 main]: Dumping streams:
10.300 main]: 0|  a:-1 rsock:24 type:2 play:0 remote:10.75.25.20:55852
10.300 main]: Got adapter 0 on sid 0 socket 14
10.300 main]: set adapter 0 for sid 0 m:0 s:1
10.300 main]: setting DVB parameters for adapter 0 - master_sid 0 sid 0 old f:0
10.300 main]: deleting pids on adapter 0, sid -1, pids=NULL
10.300 main]: copy_dvb_param start -> src=0, fe=0, freq=0, fec=9, sr=0, pol=0, ro=3, msys=0, mtype=6, plts=2, bw=8000000, inv=2, pids=NULL, apids=NULL, dpids=NULL x_pmt=NULL
10.300 main]: copy_dvb_parameters -> src=1, fe=0, freq=11493000, fec=9 sr=22000000, pol=2, ro=3, msys=6, mtype=6, plts=2, bw=8000000, inv=2, pids=0,5100,5101,5102,5103,5107,5106,5104, apids=NULL, dpids=NULL x_pmt=NULL
10.300 main]: deleting pids on adapter 0, sid 0, pids=NULL
10.300 main]: adding pids to adapter 0, sid 0, pids=0,5100,5101,5102,5103,5107,5106,5104
10.300 main]: set_socket_thread: thread 7f61f17fa640 for sockets 15
10.300 main]: Adding pid 1 to the list of pids as not explicitly added for adapter 0
10.300 main]: Adding pid 16 to the list of pids as not explicitly added for adapter 0
10.300 main]: Adding pid 18 to the list of pids as not explicitly added for adapter 0
10.300 main]: new filter 0 added for adapter 0, pid 0, flags 20, mask_len 0, master_filter 0
10.300 main]: new filter 1 added for adapter 0, pid 17, flags 20, mask_len 0, master_filter 1
10.300 main]: Dumping pids table for adapter 0, number of unknown pids: 0
10.300 main]: pid 0, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter 0, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5100, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5101, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5102, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5103, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5107, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5106, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 5104, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: 0 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 1, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: -1 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 16, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: -1 -1 -1 -1 -1 -1 -1 -1
10.300 main]: pid 18, fd 0, packets 0, d/c/c2 errs 0/0/0, flags 2, pmt -1, filter -1, sock -1, p2 0, sids: -1 -1 -1 -1 -1 -1 -1 -1
10.300 main]: netceiver: set_pid for adapter 0, pid 0, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5100, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5101, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5102, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5103, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5107, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5106, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 5104, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 1, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 16, err 0
10.300 main]: netceiver: set_pid for adapter 0, pid 18, err 0
10.300 main]: netceiver: add a new receiver instance for adapter 0
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
recv_ten: client_udp_open error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
client_udp_open_cb: bind failed on interface=eth0.2
client_udp_open_cb: socket error on interface=eth0.2
mcli::allocate_slot: client_udp_open_cb error on interface=eth0.2
10.321 main]: Reply (handle 23) [10.75.25.20:65015] content_len:0, sock 14
10.321 main]: MSG client << process :
RTSP/1.0 200 OK
Date: Sat, Jul 26 15:21:10 2025 GMT
Session: 1804289383
CSeq: 5
Server: minisatip/1.3.48~b87a97c
RTP-Info: url=rtsp://10.75.25.23/stream=1;seq=0;rtptime=2230
Range: npt=0.000-


11.396 AD0]: no data sent for more than 1s sid: 0 for 10.75.25.20:55852
11.396 AD0]: Start streaming for stream sid 0, len 12 to handle 24 => 10.75.25.20:55852
mcli::recv_ts_func: Transport error indicator set on receiver 0x5634c3ea2a80 for pid 2824: -1->0 at pos 0/4
mcli::recv_ts_func: Transport error indicator set on receiver 0x5634c3ea2a80 for pid 2162: 0->12 at pos 1/4
mcli::recv_ts_func: Transport error indicator set on receiver 0x5634c3ea2a80 for pid 904: 12->13 at pos 2/4
mcli::recv_ts_func: Received 770 bytes is not multiple of 188!
12.165 main]: netceiver: TS data mallformed: buf[0]=0x1f len=770

Display More

Ich sehe da aber etliche Fehler vom mcli, und das hat ja erstmal nichts mit dem minisatip server zu tun.

Gruß,

Roland

gggggg · July 26, 2025 at 7:20 PM

Ich bin Linux DAU und hab mit compilieren nichts am Hut

Da die /usr/lib/vdr/plugins/libvdr-mcli.so.8 mit dem vdr zusammen problemlos mit dem Netceiver komminziert, vermute ich, dass die libmcli nicht mit dem in minisatip intgierten mcli Teil zusammen passt ...

gggggg · July 27, 2025 at 5:21 PM

Ich habe jetzt ein altes Image ausgegraben und mit diesem kommen die eth0.2 Fehler nicht:
minisatip version 1.1.90, compiled in Apr 11 2022 07:01:14, with s2api version: 050B

Unterschiede:
Built with AES (OpenSSL) fehlt beim Neuen
Mutex init OK fehlt beim Neuen
netceiver: add a new receiver instance for adapter 0 kommt beim Neuen sehr früh und darauf folgt direkt Mutex init OK.
Beim Neuen kommt Obiges später und dann sofort client_udp_open_cb: bind failed on interface=eth0.2

Log im Anhang

Code

minisatip -n eth0.2:6 127.0.0.1:9001 -b 72192 -f -t -l -l -l
6 main]: minisatip version 1.1.90, compiled in Apr 11 2022 07:01:14, with s2api version: 050B
...
6 main]: Built with AES (OpenSSL)
...
7 main]: New TCP listening socket 4 at 0:0:0:0:8080, family 2
7 main]: New UDP socket 5 bound to 0.0.0.0:1900
7 main]: setting multicast for 239.255.255.250
7 main]: New UDP socket 6 bound to 239.255.255.250:1900 (mcast:239.255.255.250)
7 main]: Mutex init OK 0x5652eb0be9c0
7 main]: Mutex init OK 0x5652eca966f8
7 main]: sockets_add: handle 5 (type 0) returning socket sock 0 [:0] read: 0x5652eb04daca
7 main]: Mutex init OK 0x5652eca96858
...
7 main]: starting init_all_hw 0
40.927 main]: REEL: Search for 6 Netceivers on eth0.2... 
Found NetCeiver: fe80::208:54ff:fe54:b261
....
27 main]: netceiver: adding [AD0 DVB-S2] [AD1 DVB-S2] [AD2 DVB-S2] [AD3 DVB-S2] [AD4 DVB-S2] [AD5 DVB-S2]
39 main]: Mutex init OK 0x5652eca98b08
39 main]: netceiver: creating DVR pipe for adapter 0  -> dvr: 11
39 main]: deleting pids on adapter 0, sid -1, pids=NULL
39 main]: netceiver: add a new receiver instance for adapter 0
39 main]: Mutex init OK 0x5652ecb0ed98
39 main]: sockets_add: handle 11 (type 5) returning socket sock 7 [:0] read: 0x5652eb04da2b
39 main]: set_socket_thread: thread 7f45327fc640 for sockets 7
39 main]: done opening adapter 0 delivery systems: dvbs2 dvbs undefined undefined
39 main]: FE 1 mapped to Adapter 0, sys dvbs2
....
39 main]: Mutex init OK 0x5652ecaac288
39 AD0]: Starting select_and_execute on thread ID 7f45327fc640, thread_name AD0
39 main]: netceiver: creating DVR pipe for adapter 1  -> dvr: 13
39 main]: deleting pids on adapter 1, sid -1, pids=NULL
39 main]: netceiver: add a new receiver instance for adapter 1
39 main]: Mutex init OK 0x5652ecb10148
39 main]: sockets_add: handle 13 (type 5) returning socket sock 8 [:0] read: 0x5652eb04da2b
39 main]: set_socket_thread: thread 7f4531ffb640 for sockets 8
39 main]: done opening adapter 1 delivery systems: dvbs2 dvbs undefined undefined
...
40 main]: done init_hw 1
40 main]: Initializing with 6 devices
40 AD5]: Starting select_and_execute on thread ID 7f451b7fe640, thread_name AD5
40 main]: Starting select_and_execute on thread ID 7f453c268b00, thread_name main
40 main]: Mutex init OK 0x5652ecb152a8
40 main]: sockets_add: handle 23 (type 1) returning socket sock 13 [10.75.25.20:57445] read: 0x5652eb04da2b
40 main]: minisatip.c:1140 get_sid returns NULL for s_id = -1
40 main]: Read RTSP (sock 13, handle 23) [10.75.25.20:57445] sid -1, len: 202
40 main]: MSG client >> process :
OPTIONS rtsp://10.75.25.23:554/?src=1&freq=11493&pol=h&sr=22000&msys=dvbs2&pids=0,5100,5101,5102,5103,5107,5106,5104 RTSP/1.0
CSeq: 2
User-Agent: LibVLC/3.0.8 (LIVE555 Streaming Media v2016.11.28)


40 main]: detect_dvb_parameters (S)-> src=1&freq=11493&pol=h&sr=22000&msys=dvbs2&pids=0,5100,5101,5102,5103,5107,5106,5104
40 main]: detect_dvb_parameters (E) -> src=1, fe=0, freq=11493000, fec=9, sr=22000000, pol=2, ro=3, msys=6, mtype=6, plts=2, bw=8000000, inv=2, pids=0,5100,5101,5102,5103,5107,5106,5104 - apids=NULL - dpids=NULL x_pmt=NULL
40 main]: Setup stream sid -1 parameters, sock_id 13, handle 23
40 main]: stream.c:189 get_sid returns NULL for s_id = -1
40 main]: Mutex init OK 0x5652eb0bed80
40 main]: Mutex init OK 0x5652ecb15408
40 main]: set_sock_lock: sock_id 13 locks also mutex 0x5652ecb15408
40 main]: Mutex init OK 0x5652ecb15ff8
40 main]: sockets_add: handle -2 (type 0) returning socket sock 14 [:0] read: 0x5652eb04daca
40 main]: set_sock_lock: sock_id 14 locks also mutex 0x5652ecb15408
40 main]: Setup stream done: sid 0 for sock 13 handle 23
40 main]: copy_dvb_param start -> src=0, fe=0, freq=0, fec=9, sr=0, pol=0, ro=3, msys=0, mtype=6, plts=2, bw=8000000, inv=2, pids=NULL, apids=NULL, dpids=NULL x_pmt=NULL
40 main]: copy_dvb_parameters -> src=1, fe=0, freq=11493000, fec=9 sr=22000000, pol=2, ro=3, msys=6, mtype=6, plts=2, bw=8000000, inv=2, pids=0,5100,5101,5102,5103,5107,5106,5104, apids=NULL, dpids=NULL x_pmt=NULL
40 main]: Updating sid 0 time to 5033, current time 5033
40 main]: Reply (handle 23) [10.75.25.20:57445] content_len:0, sock 13
40 main]: MSG client << process :
RTSP/1.0 200 OK
Date: Sun, Jul 27 14:11:40 2025 GMT
Session: 1804289383
CSeq: 2
Server: minisatip/1.1.90
Public: OPTIONS, DESCRIBE, SETUP, PLAY, TEARDOWN


41 main]: Read RTSP (sock 13, handle 23) [10.75.25.20:57445] sid 0, len: 228
41 main]: MSG client >> process :
DESCRIBE rtsp://10.75.25.23:554/?src=1&freq=11493&pol=h&sr=22000&msys=dvbs2&pids=0,5100,5101,5102,5103,5107,5106,5104 RTSP/1.0
CSeq: 3
User-Agent: LibVLC/3.0.8 (LIVE555 Streaming Media v2016.11.28)
Accept: application/sdp
....
41 main]: Reply (handle 23) [10.75.25.20:57445] content_len:272, sock 13
41 main]: MSG client << process :
RTSP/1.0 200 OK
Date: Sun, Jul 27 14:11:40 2025 GMT
Session: 1804289383
CSeq: 3
Server: minisatip/1.1.90
Content-type: application/sdp
Content-Base: rtsp://10.75.25.23/
Content-Length: 272

v=0
o=- 1804289383 1804289383 IN IP4 10.75.25.23
s=SatIPServer:1 6,0,0
t=0 0
m=video 0 RTP/AVP 33
c=IN IP4 0.0.0.0
a=control:stream=1
a=fmtp:33 ver=1.0;src=1;tuner=1,255,1,15,11493,h,dvbs2,,,,22000,;pids=0,5100,5101,5102,5103,5107,5106,5104
b=AS:5000
a=inactive

43 main]: Read RTSP (sock 13, handle 23) [10.75.25.20:57445] sid 0, len: 171
43 main]: MSG client >> process :
SETUP rtsp://10.75.25.23/stream=1 RTSP/1.0
CSeq: 4
User-Agent: LibVLC/3.0.8 (LIVE555 Streaming Media v2016.11.28)
Transport: RTP/AVP;unicast;client_port=52874-52875


43 main]: Updating sid 0 time to 5037, current time 5037
43 main]: decode_transport ->type 2, ttl 0 new socket to: 10.75.25.20:52874
43 main]: New UDP socket 24 bound to 0.0.0.0:5500
43 main]: New UDP socket 24 connected to 10.75.25.20:52874
43 main]: Mutex init OK 0x5652ecb16158
43 main]: sockets_add: handle 24 (type 0) returning socket sock 15 [10.75.25.20:52874] read: 0x5652eb04daca
43 main]: output socket buffer size for socket 24 is 4194304 bytes
....
43 main]: Reply (handle 23) [10.75.25.20:57445] content_len:0, sock 13
43 main]: MSG client << process :
RTSP/1.0 200 OK
Date: Sun, Jul 27 14:11:40 2025 GMT
CSeq: 4
Server: minisatip/1.1.90
Transport: RTP/AVP;unicast;destination=10.75.25.20;source=10.75.25.23;client_port=52874-52875;server_port=5500-5501
Session: 1804289383;timeout=30
com.ses.streamID: 1


45 main]: rtcp_confirm: called for stream sid 0 from 10.75.25.20:52875
Message repeated 1 times
45 main]: Read RTSP (sock 13, handle 23) [10.75.25.20:57445] sid 0, len: 158
45 main]: MSG client >> process :
PLAY rtsp://10.75.25.23/stream=1 RTSP/1.0
CSeq: 5
User-Agent: LibVLC/3.0.8 (LIVE555 Streaming Media v2016.11.28)
Session: 1804289383
Range: npt=0.000-


45 main]: Updating sid 0 time to 5038, current time 5038
45 main]: Play for stream sid 0, type 2, rsock 24, adapter -1, sock_id 13, rsock_id 15, handle 23
45 main]: stream.c:263: get_adapter returns NULL for adapter_id -1
45 main]: adapter.c:1201: get_adapter returns NULL for adapter_id -1
45 main]: stream.c:272: get_adapter returns NULL for adapter_id -1
45 main]: get free adapter 0 - a[0] => e:1 m:-1 sid_cnt:0 src:0 f:0 pol=0 sys: dvbs2 dvbs
45 main]: Dumping adapters:
45 main]: 0|f: 0 sid_cnt:0 master_sid:-1 master_source:-1 del_sys: dvbs2,dvbs,undefined
...
.945 main]: Dumping streams:
45 main]: 0|  a:-1 rsock:24 type:2 play:0 remote:10.75.25.20:52874
45 main]: Got adapter 0 on sid 0 socket 13
45 main]: set adapter 0 for sid 0 m:0 s:1
45 main]: setting DVB parameters for adapter 0 - master_sid 0 sid 0 old f:0
45 main]: deleting pids on adapter 0, sid -1, pids=NULL
45 main]: copy_dvb_param start -> src=0, fe=0, freq=0, fec=9, sr=0, pol=0, ro=3, msys=0, mtype=6, plts=2, bw=8000000, inv=2, pids=NULL, apids=NULL, dpids=NULL x_pmt=NULL
45 main]: copy_dvb_parameters -> src=1, fe=0, freq=11493000, fec=9 sr=22000000, pol=2, ro=3, msys=6, mtype=6, plts=2, bw=8000000, inv=2, pids=0,5100,5101,5102,5103,5107,5106,5104, apids=NULL, dpids=NULL x_pmt=NULL
45 main]: deleting pids on adapter 0, sid 0, pids=NULL
45 main]: adding pids to adapter 0, sid 0, pids=0,5100,5101,5102,5103,5107,5106,5104
45 main]: Dumping pids table for adapter 0, number of unknown pids: 0
45 main]: pid 0, fd 0, packets 0, d/c errs 0/0, flags 2, pmt -1, filter -1, sock -1, sids: 0 -1 -1 -1 -1 -1 -1 -1
...
45 main]: set_socket_thread: thread 7f45327fc640 for sockets 14
45 main]: Mutex init OK 0x5652eb0c4fc0
...
45 main]: netceiver: set_pid for adapter 0, pid 0, err 0
45 main]: netceiver: set_pid for adapter 0, pid 5100, err 0
...
45 main]: netceiver: set_pid for adapter 0, pid 5104, err 0
45 main]: netceiver: adapter 0 tuning to 11493 @ 19.2E pol:h sr:22000 fec:  delsys:dvbs2 mod:
66 main]: Reply (handle 23) [10.75.25.20:57445] content_len:0, sock 13
66 main]: MSG client << process :
RTSP/1.0 200 OK
Date: Sun, Jul 27 14:11:40 2025 GMT
Session: 1804289383
CSeq: 5
Server: minisatip/1.1.90
RTP-Info: url=rtsp://10.75.25.23/stream=1;seq=0;rtptime=207

Display More

SHF · July 29, 2025 at 12:40 AM

Quote from rfehr

Ich sehe da aber etliche Fehler vom mcli, und das hat ja erstmal nichts mit dem minisatip server zu tun.

Der Fehler müsste irgendwo zwischen netceiver und minisatip liegen.
Das ist aber auch der Teil, wo ich nicht so viel Erfahrung habe .

Quote from gggggg

Da die /usr/lib/vdr/plugins/libvdr-mcli.so.8 mit dem vdr zusammen problemlos mit dem Netceiver komminziert, vermute ich, dass die libmcli nicht mit dem in minisatip intgierten mcli Teil zusammen passt ...

In dem Fall würde ich eigentlich andere Fehlermeldungen erwarten.

Meine letzte Idee wäre mal wirklich alles was mit VDR, minisatip und Netceiver zu tun hat zu stoppen.
Dann sicherstellen, dass es auch wirklich gestoppt ist. ps -A | grep programm-name
Und dann nur minisatip starten und dann VLC.

gggggg · July 31, 2025 at 9:07 AM

pbrb (nachmal Danke) hat mir minisatip statisch gebaut und damit läuft die Verbindung zum netceiver.

Nur minisatip wird sich mit satip nicht einig... (alles läuft auf einem vdr PC).

[satip]
-d 3
-s 10.75.25.23|DVBS2-3|minisatip

Jul 31 08:58:52 BM2LTS-MC vdr: [2494] switching to channel 22 S19.2E-133-33-63 (DMAX)
Jul 31 08:58:52 BM2LTS-MC vdr: [2498] SATIP-ERROR: Detected invalid status code 404: rtsp://10.75.25.23/ [device 0]
Jul 31 08:58:52 BM2LTS-MC vdr: [2498] SATIP-ERROR: Pid update failed - retuning [device 0]
Jul 31 08:58:52 BM2LTS-MC vdr: [2498] SATIP-ERROR: Detected invalid status code 404: rtsp://10.75.25.23/ [device 0]
Jul 31 08:58:52 BM2LTS-MC vdr: [2498] SATIP-ERROR: Connect failed [device 0]
Jul 31 08:58:52 BM2LTS-MC vdr: [2498] SATIP-ERROR: Detected invalid status code 404: rtsp://10.75.25.23/ [device 0]

[Blocked Image: https://ssl.gstatic.com/ui/v1/icons/mail/images/cleardot.gif]Könnt ihr mir bitte weiter helfen, woran das nun liegen könnte.

gggggg · July 31, 2025 at 11:40 AM

Sorry bin gerade drauf gekommen, dass der build ohne netceiver ist .... muss ich leider warten bis sich jemand "erbarmt" einen statischen build mit ncv zu machen.

cinfo · July 31, 2025 at 1:09 PM

Poste doch einmal die Abhängigkeiten um es statisch zu erstellen „make…“

gggggg · July 31, 2025 at 5:36 PM

.

gggggg · July 31, 2025 at 5:43 PM

Leider bringt auch der statische Build von pbrb mit Netceiver die gleichen Meldungen....

[31/07 15:04:21.210 main]: netceiver: add a new receiver instance for adapter 0
client_udp_open_cb: bind failed on interface=eth0.2

rfehr · August 5, 2025 at 7:59 PM

Quote from gggggg

Leider bringt auch der statische Build von pbrb mit Netceiver die gleichen Meldungen....
[31/07 15:04:21.210 main]: netceiver: add a new receiver instance for adapter 0
client_udp_open_cb: bind failed on interface=eth0.2

Warum willst du überhaupt den Weg über minisatip gehen, es gibt doch ein passendes plugin für den netceiver, für den vdr.

Gruß,

Roland

pbrb · August 7, 2025 at 7:41 AM

Ich hab da mich mal reingegraben und imho paßt was nicht im aktuellen minisatip -> schaut hier mal: https://github.com/catalinii/minisatip/discussions/1282

Participate now!