[gelöst] Noble will Firefox mit snap - Error

  • Hi,

    vermutlich ist das Firefox-Paket kaputt:

    Code
    ~/yavdr-ansible$sudo apt policy snap
    snap:
    Installed: (none)
    Candidate: 2013-11-29-11
    Version table:
    2013-11-29-11 500
    500 http://de.archive.ubuntu.com/ubuntu noble/universe amd64 Packages

    Da passen die Versionsbezeichnungen nicht zueinander.

    Geht auch nicht manuell (apt install ...).

    Für was braucht es den Firefox überhaupt?

    Liebe Grüße, Dieter :)

    Click to see my VDRs

    VDR5: Fujitsu Futro S740, 2TB SSD Kingston, Sat->IP von Octopus Net 8, Ubuntu 24.04, yavdr-ansible, IRMP, TV: LG 42LM670S.

    VDR1: (abgeschaltet) Asrock B75-Pro3, G1610, 4TB WD, Sat->IP von Octopus Net 8, Gainward GT630 Rev2, NVidia 470.103.01, Ubuntu 20.04 AMD64 Server, Kernel 5.4.0-107-generic, VDR 2.6.1, yavdr-ansible, Softhddevice, rc_core mit RC6+RC5, CIR-Homebrew-RS485 mit 8m Kabel, 10m HDMI, TV: LG 42LM670S

    Edited once, last by Dieter (August 2, 2024 at 6:04 PM).

  • Hi,

    vermutlich ist dies das Problem:

    In /etc/apt/preferences.d gibt es die Datei nosnap.pref mit Inhalt:

    Code
    Package: snapd
    Pin: release a=*
    Pin-Priority: -10

    Damit wird verhindert dass snap installiert werden kann.

    Nur, woher kommt sie. Auf meinem Homeserver ist sie nicht vorhanden. In den Ansible-Regeln habe ich den String nosnap nicht gefunden.

    Vielleicht ein Paket? Dpkg findet auch nichts.

    Code
    dpkg -S /etc/apt/preferences.d/nosnap.pref

    Habe die Datei entfernt, und ansible läuft wieder durch.

    Code
    sudo rm /etc/apt/preferences.d/nosnap.pref

    Liebe Grüße, Dieter :)

    Click to see my VDRs

    VDR5: Fujitsu Futro S740, 2TB SSD Kingston, Sat->IP von Octopus Net 8, Ubuntu 24.04, yavdr-ansible, IRMP, TV: LG 42LM670S.

    VDR1: (abgeschaltet) Asrock B75-Pro3, G1610, 4TB WD, Sat->IP von Octopus Net 8, Gainward GT630 Rev2, NVidia 470.103.01, Ubuntu 20.04 AMD64 Server, Kernel 5.4.0-107-generic, VDR 2.6.1, yavdr-ansible, Softhddevice, rc_core mit RC6+RC5, CIR-Homebrew-RS485 mit 8m Kabel, 10m HDMI, TV: LG 42LM670S

  • Dieter August 2, 2024 at 6:05 PM

    Changed the title of the thread from “Noble will Firefox mit snap - Error” to “[gelöst] Noble will Firefox mit snap - Error”.
  • Ich wüsste nicht, woher die Datei kommt - das ist ja eigentlich vom Playbook vorgesehen, dass Firefox als Snap installiert werden kann.

    Für was braucht es den Firefox überhaupt?

    yaVDR hatte halt schon immer einen Webbrowser dabei - kannst du aber auch weglassen.

    Meine VDRs

    VDR 1: Intel DH67BL, Celeron 540, 4 GB Ram, POV Geforce GT 1030, Ubuntu 24.04 (yavdr-ansible), VDR 2.7.4, CIR-Empfänger
    VDR 2: Acer Revo 3610, Pinnacle PCTV SAT 452e, Medion X10, yaVDR 0.6
    Client 1: Raspberry Pi 2, Ubuntu 22.04 (yavdr-ansible), VDR 2.6.1

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

  • Nein, Ubuntu-Server 24.04.

    Die nosnap.pref muss durch ein Paket o. Ä ins System gekommen sein. Kommt Zeit kommt Rat :)

    Liebe Grüße, Dieter :)

    Click to see my VDRs

    VDR5: Fujitsu Futro S740, 2TB SSD Kingston, Sat->IP von Octopus Net 8, Ubuntu 24.04, yavdr-ansible, IRMP, TV: LG 42LM670S.

    VDR1: (abgeschaltet) Asrock B75-Pro3, G1610, 4TB WD, Sat->IP von Octopus Net 8, Gainward GT630 Rev2, NVidia 470.103.01, Ubuntu 20.04 AMD64 Server, Kernel 5.4.0-107-generic, VDR 2.6.1, yavdr-ansible, Softhddevice, rc_core mit RC6+RC5, CIR-Homebrew-RS485 mit 8m Kabel, 10m HDMI, TV: LG 42LM670S

  • yaVDR hatte halt schon immer einen Webbrowser dabei - kannst du aber auch weglassen.

    Ich möchte demnächst auch auf ubuntu-24.04 wechseln.

    Den Firefox-Browser habe ich noch nie benutzt und würde diesen direkt weglassen.

    Ich habe schon mal die Scripte/Templates in /home/yavdr/yavdr-ansible grob durchsucht,

    aber keine Stelle gefunden, die auf den Firefox verweist.

    Deshalb mal meine Frage/Bitte:

    In welchem Template oder anderen Datei könnte ich denn da die Installation des Firefox deaktivieren?

    PS:

    In der yavdr07.yml wird 2x die Installation der dvb-firmware gemacht, siehe Zeile #4 und #6.

    Ist das so gewollt?

    meine aktuelle Hard- und Software

    Heimkino: . . . . . . . AVR Denon AVR-X4800H . . . MiniLED-UHD-TV SONY BRAVIA XR-75X95L. . . Universal-FB: Sofabaton U2
    VDR-Hardware: . . Grafik MSI GT1030, Quad-DVB-C/T2 TBS-6205, Quad-DVB-S2/S2X TBS-6904SE

    VDR-Software: . . . yaVDR-ansible-noble - Kernel 6.08.0 - VDR-2.7.x - nvidia-550
    VDR-Client 1+ Media-Player: . . . Odroid N2 . 4GB mit VDR*ELEC Kodi-21.x + VDR-2.7.x_@Zabrimus
    VDR-Client 2+ Media-Player: . . . Dune HD Homatics Box R4K Plus . 4GB mit Kodi-21.x + VDR-2.7.x_@Zabrimus

    Edited once, last by Paulaner (October 3, 2024 at 3:27 PM).

  • Den Firefox-Browser habe ich noch nie benutzt und würde diesen direkt weglassen.

    Der wird hier zusammen mit dem kiosk-browser installiert: https://github.com/yavdr/yavdr-an…p-xorg.yml#L150

    Meine VDRs

    VDR 1: Intel DH67BL, Celeron 540, 4 GB Ram, POV Geforce GT 1030, Ubuntu 24.04 (yavdr-ansible), VDR 2.7.4, CIR-Empfänger
    VDR 2: Acer Revo 3610, Pinnacle PCTV SAT 452e, Medion X10, yaVDR 0.6
    Client 1: Raspberry Pi 2, Ubuntu 22.04 (yavdr-ansible), VDR 2.6.1

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

  • Vielen Dank, für die schnelle Antwort. :thumbup:

    Ich werde die Zeile mit dem firefox erstmal nur auskommentieren.

    Falls ich den Firefox dann doch mal brauchen sollte, kann ich den ja mit einem einfachen apt install firefox nachinstallieren. ;)

    meine aktuelle Hard- und Software

    Heimkino: . . . . . . . AVR Denon AVR-X4800H . . . MiniLED-UHD-TV SONY BRAVIA XR-75X95L. . . Universal-FB: Sofabaton U2
    VDR-Hardware: . . Grafik MSI GT1030, Quad-DVB-C/T2 TBS-6205, Quad-DVB-S2/S2X TBS-6904SE

    VDR-Software: . . . yaVDR-ansible-noble - Kernel 6.08.0 - VDR-2.7.x - nvidia-550
    VDR-Client 1+ Media-Player: . . . Odroid N2 . 4GB mit VDR*ELEC Kodi-21.x + VDR-2.7.x_@Zabrimus
    VDR-Client 2+ Media-Player: . . . Dune HD Homatics Box R4K Plus . 4GB mit Kodi-21.x + VDR-2.7.x_@Zabrimus

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!