[0.7] VDRAdmin - Update?

Nein, das Paket nutzt auch nur das SysV-Init Skript aus dem Debianpaket - mein Vorschlag wäre sowas:

# /etc/systemd/system/vdradmin-am.service
[Unit]
Description=vdradmin-am a SVDRP-based VDR frontend written in Perl
Documentation=man:vdradmind(8)
After=network-online.target
Wants=network-online.target

[Service]
User=vdradmin-am
Group=vdradmin-am
Type=simple
ExecStart=/usr/bin/vdradmind -n --ipv6

[Install]
WantedBy=multi-user.target

Weiß jemand, warum da explizit ein nice-Wert für den Prozess gesetzt wird? Ist das noch ein Problem bei den heutzutage von Ubuntu unterstützten CPUs?

Quote from MegaV0lt

Ist da vielleicht ein Tippfehler drin?

ja TyPo!

@@ -14,7 +14,7 @@
 Depends: ${perl:Depends}, ${misc:Depends}, libio-compress-perl,
  libtemplate-perl, liburi-perl, libio-socket-inet6-perl, libsocket6-perl,
  liblocale-gettext-perl | libintl-perl, libwww-perl, adduser, lsb-base,
- libtemplate-plugin-javascript-perl, libcgi-pm-perl
+ libtemplate-plugin-javascript-perl, libcgi-pm-perl, libhttp-daemon-perl, libhttp-daemon-per
 Suggests: vdr (>= 1.7.15), libauthen-sasl-perl, vdr-plugin-epgsearch (>= 0.9.23)
 Provides: vdradmin
 Replaces: vdradmin

Eine neue Version des Pakets ist unterwegs.

Kann es sein das Umlaute in der Suche nicht funktionieren? Sucht z.B. mal nach Käse

Stimmt. Trödeltrupp macht dasselbe ;-/

Locale ist im vdradmin auf DE_at:UTF-8 eingestellt.

Nehmt ca. 19 Zeilen vorher das quotemeta() weg, dann geht es:

vorher:
for my $ch (split(//, quotemeta($word))) {

nachher:
for my $ch (split(//, $word)) {

Edit: hier auch noch als diff

Quote from seahawk1986

Nein, das Paket nutzt auch nur das SysV-Init Skript aus dem Debianpaket - mein Vorschlag wäre sowas:

Code

# /etc/systemd/system/vdradmin-am.service
[Unit]
Description=vdradmin-am a SVDRP-based VDR frontend written in Perl
Documentation=man:vdradmind(8)
After=network-online.target
Wants=network-online.target

[Service]
User=vdradmin-am
Group=vdradmin-am
Type=simple
ExecStart=/usr/bin/vdradmind -n --ipv6

[Install]
WantedBy=multi-user.target

Display More

Weiß jemand, warum da explizit ein nice-Wert für den Prozess gesetzt wird? Ist das noch ein Problem bei den heutzutage von Ubuntu unterstützten CPUs?

hier gibt's ein unit-File, was unter Fedora Linux funktioniert:
https://github.com/vdr-projects/v…/master/contrib

"nice" ist immer noch eine gute Wahl für Daemons, die gerne mal länger Resourcen fressen, um den Rest vom System nicht zu beeinflussen.

Quote from MacGyver_Reelbox

Ich täte sagen es gab ein paar Fehler beim Installieren

Zeilen 100-117 und unten die ganzen Channel_ID not found.

Code

root@BM2LTS-MC:~# cd /usr/share
root@BM2LTS-MC:/usr/share# rm -r vdradmin
root@BM2LTS-MC:/usr/share# cd /home
root@BM2LTS-MC:/home# git clone https://github.com/vdr-projects/vdradmin-am
Klone nach 'vdradmin-am' …
remote: Enumerating objects: 3951, done.
remote: Counting objects: 100% (271/271), done.
remote: Compressing objects: 100% (116/116), done.
remote: Total 3951 (delta 162), reused 232 (delta 146), pack-reused 3680
Empfange Objekte: 100% (3951/3951), 3.82 MiB | 3.64 MiB/s, fertig.
Löse Unterschiede auf: 100% (2147/2147), fertig.
root@BM2LTS-MC:/home# cd /home/vdradmin-am
root@BM2LTS-MC:/home/vdradmin-am# ./install.sh

********* Installing VDRAdmin-AM *************


*** Required ***
Checking for Perl module locale...  found
Checking for Perl module Template...  found
Checking for Perl module Template::Plugin::JavaScript...  found
Checking for Perl module CGI...  found
Checking for Perl module HTTP::Date...  found
Checking for Perl module IO::Socket...  found
Checking for Perl module Time::Local...  found
Checking for Perl module MIME::Base64...  found
Checking for Perl module File::Temp...  found
Checking for Perl module File::Find...  found
Checking for Perl module URI...  found
Checking for Perl module URI::Escape...  found
Checking for Perl module HTTP::Tiny...  found
Checking for Perl module HTTP::Daemon...  found

You need Locale::gettext OR Locale::Messages
Checking for Perl module Locale::gettext or Locale::Messages...  found

*** Optional ***
* Required for AutoTimer email notification
Checking for Perl module Net::SMTP...  found
Checking for Perl module Authen::SASL...  found
* Required for AutoTimer email notification and CRAM-MD5 authentication
Checking for Perl module Digest::HMAC_MD5...  found
* Required if VDR and VDRAdmin-AM use different character encoding
Checking for Perl module Encode...  found
* Required for IPv6 support
Checking for Perl module IO::Socket::INET6...  found
* Required for SSL support (https)
Checking for Perl module HTTP::Daemon::SSL...  MISSING
Do you want to install HTTP::Daemon::SSL? [y/N]y
Reading '/root/.local/share/.cpan/Metadata'  Database was generated on Sat, 18 Mar 2023 14:41:02 GMT
Fetching with LWP:
http://www.cpan.org/authors/01mailrc.txt.gz
Reading '/root/.local/share/.cpan/sources/authors/01mailrc.txt.gz'
............................................................................DONE
Fetching with LWP:
http://www.cpan.org/modules/02packages.details.txt.gz
Reading '/root/.local/share/.cpan/sources/modules/02packages.details.txt.gz'  Database was generated on Tue, 13 Jun 2023 15:54:02 GMT
..............  New CPAN.pm version (v2.36) available.  [Currently running version is v2.28]  You might want to try    install CPAN    reload cpan  to both upgrade CPAN.pm and run the new version without leaving  the current session.


..............................................................DONE
Fetching with LWP:
http://www.cpan.org/modules/03modlist.data.gz
Reading '/root/.local/share/.cpan/sources/modules/03modlist.data.gz'
DONE
Writing /root/.local/share/.cpan/Metadata
Running install for module 'HTTP::Daemon::SSL'
Checksum for /root/.local/share/.cpan/sources/authors/id/A/AU/AUFFLICK/HTTP-Daemon-SSL-1.04.tar.gz ok
Configuring A/AU/AUFFLICK/HTTP-Daemon-SSL-1.04.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Have /usr/local/lib/x86_64-linux-gnu/perl/5.34.0
Want /usr/lib/x86_64-linux-gnu/perl/5.34
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [5.34.0]
Config says: [x86_64-linux-gnu-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for HTTP::Daemon::SSL
Writing MYMETA.yml and MYMETA.json  AUFFLICK/HTTP-Daemon-SSL-1.04.tar.gz  /usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for A/AU/AUFFLICK/HTTP-Daemon-SSL-1.04.tar.gz
cp SSL.pm blib/lib/HTTP/Daemon/SSL.pm
Manifying 1 pod document  AUFFLICK/HTTP-Daemon-SSL-1.04.tar.gz  /usr/bin/make -- OK
The current configuration of allow_installing_outdated_dists is 'ask/yes', but for this option we would need 'CPAN::DistnameInfo' installed. Please install 'CPAN::DistnameInfo' as soon as possible. As long as we are not equipped with 'CPAN::DistnameInfo' this option does not take effect
Running make test for AUFFLICK/HTTP-Daemon-SSL-1.04.tar.gz
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/loadmodule.t .. ok
t/testmodule.t .. 0/9 Can't use an undefined value as a symbol reference at t/testmodule.t line 31.
t/testmodule.t .. Failed 9/9 subtests

Test Summary Report
-------------------
t/testmodule.t (Wstat: 0 Tests: 1 Failed: 1)  Failed test:  0  Parse errors: Tests out of sequence.  Found (0) but expected (1)                Bad plan.  You planned 9 tests but ran 1.
Files=2, Tests=4,  1 wallclock secs ( 0.01 usr  0.00 sys +  0.07 cusr  0.02 csys =  0.10 CPU)
Result: FAIL
Failed 1/2 test programs. 1/4 subtests failed.
make: *** [Makefile:820: test_dynamic] Fehler 255  AUFFLICK/HTTP-Daemon-SSL-1.04.tar.gz  /usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:  reports AUFFLICK/HTTP-Daemon-SSL-1.04.tar.gz
* Required if you want to use gzip'ed HTTP responses
Checking for Perl module Compress::Zlib...  found
* Required if you want to log to syslog
Checking for Perl module Sys::Syslog...  found
./install.sh: Zeile 158: cd: locale: Datei oder Verzeichnis nicht gefunden
install: Aufruf von stat für 'autotimer2searchtimer.pl/LC_MESSAGES/vdradmin.mo' nicht möglich: Ist kein Verzeichnis
Killed running VDRAdmin-AM...
Restarting VDRAdmin-AM...



VDRAdmin-AM has been installed!

NOTE:
If you want to run VDRAdmin-AM in a different language you must set the LANG environment variable (see README).

NOTE2:
If you would like VDRAdmin-AM to start at system's boot, please modify your system's init scripts.

NOTE3:
VDRAdmin-AM needs to access some directories:
/etc/vdradmin
/var/cache/vdradmin
/var/log/vdradmin
/var/run/vdradmin

Please check that the user VDRAdmin-AM runs has enough permissions to access them!
root@BM2LTS-MC:/home/vdradmin-am# Can't find channel_id C-1-1019-10302-100
Can't find channel_id C-1-1019-10303-100
Can't find channel_id C-1-1039-10376-100
Can't find channel_id C-1-1039-10377-100
Can't find channel_id C-1-1039-10378-100
Can't find channel_id C-1-1039-10375-100
Can't find channel_id C-1-1039-10379-100
Can't find channel_id C-1-1010-11160-100
Can't find channel_id C-1-1010-11150-100
Can't find channel_id C-1-1010-11170-100
Can't find channel_id C-1-1025-10325-100
Can't find channel_id C-1-1025-10329-100
Can't find channel_id C-1-1025-10331-100
Can't find channel_id C-156-5700-236-100
Can't find channel_id C-156-6500-421-100
Can't find channel_id C-1-1011-11110-100
Can't find channel_id C-1-1011-11130-100
Can't find channel_id C-1-1061-10355-100
Can't find channel_id C-1-1061-10351-100
Can't find channel_id C-1-1061-10352-100
Can't find channel_id C-61697-49153-260-100
Can't find channel_id C-61697-49153-258-100
Can't find channel_id C-61697-49153-259-100
Can't find channel_id C-61697-49153-263-100
Can't find channel_id C-61697-49153-262-100
Can't find channel_id C-61697-49154-519-100
Can't find channel_id C-61697-49154-527-100
Can't find channel_id C-61697-49153-261-100
Can't find channel_id C-61697-49154-513-100
Can't find channel_id C-61697-49154-520-100
Can't find channel_id C-61697-49154-515-100
Can't find channel_id C-61697-49155-773-100
Can't find channel_id C-61697-49156-1025-100
Can't find channel_id C-61697-49155-771-100
Can't find channel_id C-61697-49155-775-100
Can't find channel_id C-61697-49155-770-100
Can't find channel_id C-61697-49155-774-100
Can't find channel_id C-61697-49155-772-100
Can't find channel_id C-61697-49156-1027-100
Can't find channel_id C-61697-49156-1026-100
Can't find channel_id C-61697-49159-1795-100
Can't find channel_id C-61697-49159-1799-100
Can't find channel_id C-61697-49159-1798-100
Can't find channel_id C-61697-53249-4246-100
Can't find channel_id C-61697-53249-4224-100
Can't find channel_id C-61697-53249-4203-100
Can't find channel_id C-61697-53249-4549-100
Can't find channel_id C-61697-49160-2050-100
Can't find channel_id C-61697-53250-8197-100

Display More

Ich mache gerade trotzdem mal einen Reboot!Weboberfläche zeigt nun die neue VDRAdmin-AM 3.6.13 an; es bleibt aber dabei, dass mir keine EPG-Daten angezeigt werden.