[0.6.0] VDR startet nach Installation nicht

Zoidson · January 5, 2016 at 7:39 PM

Moin Leute,

erstmal vielen Dank ans Team für 0.6!

In dem Announce-Thread steht ja "beim ersten Start nach der Installation läuft das Upstart-Skript first-vdr-start - bitte den Rechner nicht neu starten, solange das aktiv ist (wenn es fertig ist löscht es sich selbst aus /etc/init/first-vdr-start.conf) - danach sollte der VDR gestartet und das Frontend angezeigt werden.".

Wie lange sollte man denn da warten? Nach einer Stunde ist die Datei immer noch vorhanden und der VDR nicht gestartet. Das kommt mir doch etwas lang vor!

Mir scheint, dass es Probleme beim Starten des X-Servers gibt.

/var/log/upstart/xorg-launcher.log

X.Org X Server 1.15.1
Release Date: 2014-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-76-generic x86_64 Ubuntu
Current Operating System: Linux yavdr06 3.13.0-74-generic #118-Ubuntu SMP Thu Dec 17 22:52:10 UTC 2015 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-74-generic root=UUID=c966a7aa-4daa-42ac-8990-33dba300ad3b ro vmalloc=256m quiet splash noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
Build Date: 12 February 2015 02:49:29PM
xorg-server 2:1.15.1-0ubuntu2.7 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.30.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Tue Jan 5 18:39:30 2016
(==) Using config file: "/etc/X11/xorg.conf.yavdr"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension SELinux
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
(EE)
Fatal server error:
(EE) no screens found(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.

/var/log/upstart/openbox.log

Openbox-Message: Failed to open the display from the DISPLAY environment variable.
Openbox-Message: Failed to open the display from the DISPLAY environment variable.
Openbox-Message: Failed to open the display from the DISPLAY environment variable.
Openbox-Message: Failed to open the display from the DISPLAY environment variable.
Openbox-Message: Failed to open the display from the DISPLAY environment variable.
Openbox-Message: Failed to open the display from the DISPLAY environment variable.
Openbox-Message: Failed to open the display from the DISPLAY environment variable.
Openbox-Message: Failed to open the display from the DISPLAY environment variable.
Openbox-Message: Failed to open the display from the DISPLAY environment variable.
Openbox-Message: Failed to open the display from the DISPLAY environment variable.
Openbox-Message: Failed to open the display from the DISPLAY environment variable.

/var/log/Xorg.1.log

[ 11.073]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 11.073] X Protocol Version 11, Revision 0
[ 11.073] Build Operating System: Linux 3.2.0-76-generic x86_64 Ubuntu
[ 11.073] Current Operating System: Linux yavdr06 3.13.0-74-generic #118-Ubuntu SMP Thu Dec 17 22:52:10 UTC 2015 x86_64
[ 11.073] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-74-generic root=UUID=c966a7aa-4daa-42ac-8990-33dba300ad3b ro vmalloc=256m quiet splash noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
[ 11.073] Build Date: 12 February 2015 02:49:29PM
[ 11.073] xorg-server 2:1.15.1-0ubuntu2.7 (For technical support please see http://www.ubuntu.com/support)
[ 11.073] Current version of pixman: 0.30.2
[ 11.073] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.073] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.073] (==) Log file: "/var/log/Xorg.1.log", Time: Tue Jan 5 18:39:30 2016
[ 11.077] (==) Using config file: "/etc/X11/xorg.conf.yavdr"
[ 11.077] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11.081] (==) ServerLayout "Layout0"
[ 11.081] (**) |-->Screen "Screen0" (0)
[ 11.081] (**) | |-->Monitor "Monitor0"
[ 11.082] (**) | |-->Device "Device0"
[ 11.082] (**) |-->Input Device "Keyboard0"
[ 11.082] (**) |-->Input Device "Mouse0"
[ 11.082] (==) Automatically adding devices
[ 11.082] (==) Automatically enabling devices
[ 11.082] (==) Automatically adding GPU devices
[ 11.083] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 11.083] Entry deleted from font path.
[ 11.083] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 11.083] Entry deleted from font path.
[ 11.083] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 11.083] Entry deleted from font path.
[ 11.083] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 11.083] Entry deleted from font path.
[ 11.083] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 11.083] Entry deleted from font path.
[ 11.083] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 11.083] Entry deleted from font path.
[ 11.083] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 11.083] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 11.083] (**) Extension "Composite" is disabled
[ 11.083] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 11.083] (WW) Disabling Keyboard0
[ 11.083] (WW) Disabling Mouse0
[ 11.083] (II) Loader magic: 0x7ff9e428dd40
[ 11.083] (II) Module ABI versions:
[ 11.083] X.Org ANSI C Emulation: 0.4
[ 11.083] X.Org Video Driver: 15.0
[ 11.083] X.Org XInput driver : 20.0
[ 11.083] X.Org Server Extension : 8.0
[ 11.084] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.084] (--) PCI:*(0:1:0:0) 10de:1284:19da:1308 rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 11.085] Initializing built-in extension Generic Event Extension
[ 11.085] Initializing built-in extension SHAPE
[ 11.085] Initializing built-in extension MIT-SHM
[ 11.085] Initializing built-in extension XInputExtension
[ 11.085] Initializing built-in extension XTEST
[ 11.085] Initializing built-in extension BIG-REQUESTS
[ 11.085] Initializing built-in extension SYNC
[ 11.085] Initializing built-in extension XKEYBOARD
[ 11.085] Initializing built-in extension XC-MISC
[ 11.085] Initializing built-in extension SECURITY
[ 11.085] Initializing built-in extension XINERAMA
[ 11.085] Initializing built-in extension XFIXES
[ 11.085] Initializing built-in extension RENDER
[ 11.085] Initializing built-in extension RANDR
[ 11.085] Initializing built-in extension COMPOSITE
[ 11.085] Initializing built-in extension DAMAGE
[ 11.085] Initializing built-in extension MIT-SCREEN-SAVER
[ 11.085] Initializing built-in extension DOUBLE-BUFFER
[ 11.085] Initializing built-in extension RECORD
[ 11.085] Initializing built-in extension DPMS
[ 11.085] Initializing built-in extension Present
[ 11.085] Initializing built-in extension DRI3
[ 11.085] Initializing built-in extension X-Resource
[ 11.085] Initializing built-in extension XVideo
[ 11.085] Initializing built-in extension XVideo-MotionCompensation
[ 11.085] Initializing built-in extension SELinux
[ 11.085] Initializing built-in extension XFree86-VidModeExtension
[ 11.085] Initializing built-in extension XFree86-DGA
[ 11.085] Initializing built-in extension XFree86-DRI
[ 11.085] Initializing built-in extension DRI2
[ 11.085] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 11.085] (II) "glx" will be loaded by default.
[ 11.085] (WW) "xmir" is not to be loaded by default. Skipping.
[ 11.085] (II) LoadModule: "glx"
[ 11.088] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 11.229] (II) Module glx: vendor="NVIDIA Corporation"
[ 11.229] compiled for 4.0.2, module version = 1.0.0
[ 11.229] Module class: X.Org Server Extension
[ 11.230] (II) NVIDIA GLX Module 352.63 Sat Nov 7 20:52:00 PST 2015
[ 11.231] Loading extension GLX
[ 11.231] (==) Matched nvidia as autoconfigured driver 0
[ 11.231] (==) Matched nouveau as autoconfigured driver 1
[ 11.231] (==) Matched nvidia as autoconfigured driver 2
[ 11.231] (==) Matched nouveau as autoconfigured driver 3
[ 11.231] (==) Matched modesetting as autoconfigured driver 4
[ 11.231] (==) Matched fbdev as autoconfigured driver 5
[ 11.231] (==) Matched vesa as autoconfigured driver 6
[ 11.231] (==) Assigned the driver to the xf86ConfigLayout
[ 11.231] (II) LoadModule: "nvidia"
[ 11.231] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 11.240] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11.240] compiled for 4.0.2, module version = 1.0.0
[ 11.240] Module class: X.Org Video Driver
[ 11.241] (II) LoadModule: "nouveau"
[ 11.242] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 11.243] (II) Module nouveau: vendor="X.Org Foundation"
[ 11.243] compiled for 1.15.0, module version = 1.0.10
[ 11.243] Module class: X.Org Video Driver
[ 11.243] ABI class: X.Org Video Driver, version 15.0
[ 11.243] (II) LoadModule: "modesetting"
[ 11.243] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 11.244] (II) Module modesetting: vendor="X.Org Foundation"
[ 11.244] compiled for 1.15.0, module version = 0.8.1
[ 11.244] Module class: X.Org Video Driver
[ 11.244] ABI class: X.Org Video Driver, version 15.0
[ 11.244] (II) LoadModule: "fbdev"
[ 11.244] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 11.244] (II) Module fbdev: vendor="X.Org Foundation"
[ 11.244] compiled for 1.15.0, module version = 0.4.4
[ 11.244] Module class: X.Org Video Driver
[ 11.244] ABI class: X.Org Video Driver, version 15.0
[ 11.244] (II) LoadModule: "vesa"
[ 11.245] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 11.245] (II) Module vesa: vendor="X.Org Foundation"
[ 11.245] compiled for 1.15.0, module version = 2.3.3
[ 11.245] Module class: X.Org Video Driver
[ 11.245] ABI class: X.Org Video Driver, version 15.0
[ 11.245] (II) NVIDIA dlloader X Driver 352.63 Sat Nov 7 20:29:25 PST 2015
[ 11.245] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11.245] (II) NOUVEAU driver Date: Thu Nov 7 14:56:48 2013 +1000
[ 11.245] (II) NOUVEAU driver for NVIDIA chipset families :
[ 11.245] RIVA TNT (NV04)
[ 11.245] RIVA TNT2 (NV05)
[ 11.245] GeForce 256 (NV10)
[ 11.245] GeForce 2 (NV11, NV15)
[ 11.245] GeForce 4MX (NV17, NV18)
[ 11.246] GeForce 3 (NV20)
[ 11.246] GeForce 4Ti (NV25, NV28)
[ 11.246] GeForce FX (NV3x)
[ 11.246] GeForce 6 (NV4x)
[ 11.246] GeForce 7 (G7x)
[ 11.246] GeForce 8 (G8x)
[ 11.246] GeForce GTX 200 (NVA0)
[ 11.246] GeForce GTX 400 (NVC0)
[ 11.246] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 11.246] (II) FBDEV: driver for framebuffer: fbdev
[ 11.246] (II) VESA: driver for VESA chipsets: vesa
[ 11.246] (++) using VT number 7

[ 11.249] (II) Loading sub module "fb"
[ 11.249] (II) LoadModule: "fb"
[ 11.249] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.250] (II) Module fb: vendor="X.Org Foundation"
[ 11.250] compiled for 1.15.1, module version = 1.0.0
[ 11.250] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.250] (II) Loading sub module "wfb"
[ 11.250] (II) LoadModule: "wfb"
[ 11.250] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11.251] (II) Module wfb: vendor="X.Org Foundation"
[ 11.251] compiled for 1.15.1, module version = 1.0.0
[ 11.251] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.251] (II) Loading sub module "ramdac"
[ 11.251] (II) LoadModule: "ramdac"
[ 11.251] (II) Module "ramdac" already built-in
[ 11.252] (WW) Falling back to old probe method for modesetting
[ 11.252] (WW) Falling back to old probe method for fbdev
[ 11.252] (II) Loading sub module "fbdevhw"
[ 11.252] (II) LoadModule: "fbdevhw"
[ 11.252] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 11.253] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 11.253] compiled for 1.15.1, module version = 0.0.2
[ 11.253] ABI class: X.Org Video Driver, version 15.0
[ 11.253] (WW) Falling back to old probe method for vesa
[ 11.253] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 11.253] (==) NVIDIA(0): RGB weight 888
[ 11.253] (==) NVIDIA(0): Default visual is TrueColor
[ 11.253] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.254] (**) NVIDIA(0): Option "NoLogo" "True"
[ 11.254] (**) NVIDIA(0): Option "ExactModeTimingsDVI" "True"
[ 11.254] (**) NVIDIA(0): Option "DPI" "100x100"
[ 11.254] (**) NVIDIA(0): Option "TripleBuffer" "False"
[ 11.254] (**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
[ 11.254] (**) NVIDIA(0): Option "FlatPanelProperties" "Scaling = Native"
[ 11.254] (WW) NVIDIA(0): Unrecognized FlatPanelProperties property "Scaling";
[ 11.254] (WW) NVIDIA(0): ignoring.
[ 11.254] (WW) NVIDIA(0): Option "ConnectedMonitor" requires a string value
[ 11.254] (WW) NVIDIA(0): Option "UseDisplayDevice" requires a string value
[ 11.254] (**) NVIDIA(0): Enabling 2D acceleration
[ 11.661] (II) NVIDIA: Allocated GPU:0 (GPU-9356d57d-a9de-aad8-d8a7-bcd71dea7c8d) @
[ 11.661] (II) NVIDIA: PCI:0000:01:00.0
[ 11.664] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 11.664] (--) NVIDIA(0): CRT-0
[ 11.664] (--) NVIDIA(0): DFP-0
[ 11.664] (--) NVIDIA(0): DFP-1 (boot)
[ 11.665] (--) NVIDIA(0): CRT-0: disconnected
[ 11.665] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 11.665] (--) NVIDIA(0):
[ 11.665] (--) NVIDIA(0): DFP-0: disconnected
[ 11.665] (--) NVIDIA(0): DFP-0: Internal TMDS
[ 11.665] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 11.665] (--) NVIDIA(0):
[ 11.694] (--) NVIDIA(0): DENON, Ltd. DENON-AVR (DFP-1): connected
[ 11.694] (--) NVIDIA(0): DENON, Ltd. DENON-AVR (DFP-1): Internal TMDS
[ 11.694] (--) NVIDIA(0): DENON, Ltd. DENON-AVR (DFP-1): 165.0 MHz maximum pixel clock
[ 11.694] (--) NVIDIA(0):
[ 11.694] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 11.695] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630 (GK208) at PCI:1:0:0 (GPU-0)
[ 11.695] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 11.695] (--) NVIDIA(0): VideoBIOS: 80.28.3d.00.14
[ 11.695] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[ 11.701] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 11.701] (**) NVIDIA(0): device DENON, Ltd. DENON-AVR (DFP-1) (Using EDID
[ 11.701] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 11.706] (EE) NVIDIA(0): Failed to build requested mode list.
[ 11.706] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 11.737] (II) NVIDIA: Freed GPU:0 (GPU-9356d57d-a9de-aad8-d8a7-bcd71dea7c8d) @
[ 11.737] (II) NVIDIA: PCI:0000:01:00.0
[ 11.894] (II) UnloadModule: "nvidia"
[ 11.894] (II) UnloadSubModule: "wfb"
[ 11.894] (II) UnloadSubModule: "fb"
[ 11.894] (EE) Screen(s) found, but none have a usable configuration.
[ 11.894] (EE)
Fatal server error:
[ 11.894] (EE) no screens found(EE)
[ 11.894] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 11.894] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[ 11.894] (EE)
[ 11.898] (EE) Server terminated with error (1). Closing log file.

dkms status

media-build-experimental, 0~20150719.122100, 3.13.0-74-generic, x86_64: installed
nvidia-352, 352.63, 3.13.0-74-generic, x86_64: installed

Hat jemand eine Idee, wo ich ansetzen könnte?

seahawk1986 · January 5, 2016 at 7:53 PM

Dann probier mal das Event von Hand auszulösen:

Code

/usr/bin/signal-event first-vdr-start

dann noch einen Neustart, wenn er durch ist (am Schluss löscht er die /etc/init/first-vdr-start.conf).

Zoidson · January 6, 2016 at 9:00 AM

Beim manuellen Ausführen kommt folgendes:

/usr/bin/signal-event first-vdr-start

start: Job is already running: pulseaudio
/etc/vdr/conf.d/../conf.avail/pulsecontrol.conf is already linked to /etc/vdr/conf.d at /usr/bin/vdrctl line 152.
streamdev = 1
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden NEUEN Pakete werden installiert:
vdr-plugin-streamdev-client
0 aktualisiert, 1 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 241 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 473 kB Plattenplatz zusätzlich benutzt.
Holen: 1 http://ppa.launchpad.net/yavdr/stable-vdr/ubuntu/ trusty/main vdr-plugin-streamdev-client amd64 0.6.1.git20151004-0yavdr2~trusty [241 kB]
Es wurden 241 kB in 0 s geholt (418 kB/s).
Vormals nicht ausgewähltes Paket vdr-plugin-streamdev-client wird gewählt.
(Lese Datenbank ... 107128 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../vdr-plugin-streamdev-client_0.6.1.git20151004-0yavdr2~trusty_amd64.deb ...
Keine Umleitung »Umleitung von /usr/share/locale/de_DE/LC_MESSAGES/vdr-streamdev.mo durch vdr-plugin-streamdev-client«, keine entfernt.
Keine Umleitung »Umleitung von /usr/share/locale/fi_FI/LC_MESSAGES/vdr-streamdev.mo durch vdr-plugin-streamdev-client«, keine entfernt.
Keine Umleitung »Umleitung von /usr/share/locale/fr_FR/LC_MESSAGES/vdr-streamdev.mo durch vdr-plugin-streamdev-client«, keine entfernt.
Keine Umleitung »Umleitung von /usr/share/locale/it_IT/LC_MESSAGES/vdr-streamdev.mo durch vdr-plugin-streamdev-client«, keine entfernt.
Keine Umleitung »Umleitung von /usr/share/locale/ru_RU/LC_MESSAGES/vdr-streamdev.mo durch vdr-plugin-streamdev-client«, keine entfernt.
Keine Umleitung »Umleitung von /usr/share/locale/sk_SK/LC_MESSAGES/vdr-streamdev.mo durch vdr-plugin-streamdev-client«, keine entfernt.
Entpacken von vdr-plugin-streamdev-client (0.6.1.git20151004-0yavdr2~trusty) ...
vdr-plugin-streamdev-client (0.6.1.git20151004-0yavdr2~trusty) wird eingerichtet ...
start: Job is already running: sound-device
wait-for-sound stop/waiting

Die Datei ist aber nach wie vor vorhanden.

Ich vermute jetzt aber mitlerweile, dass meine Grafikkarte (GT 630) nicht richtig erkannt wird:

Code

dmesg | grep nvidia
[    3.502557] nvidia: module license 'NVIDIA' taints kernel.
[    3.506276] nvidia: module verification failed: signature and/or  required key missing - tainting kernel
[    3.520013] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[    3.521143] nvidia 0000:01:00.0: irq 45 for MSI/MSI-X
[    8.731168] nvidia 0000:01:00.0: irq 47 for MSI/MSI-X

seahawk1986 · January 6, 2016 at 9:03 AM

Ok, das heißt, dass er bis https://github.com/yavdr/yavdr-ut…rt-sound-device gekommen ist (das ist die letzte Action für das Event). Dann lösch mal /etc/init/first-vdr-start.conf/ und schau, was nach einem Reboot passiert.

Zoidson · January 6, 2016 at 9:21 AM

Der VDR startet dann und sogar das iMON Display zeigt den Sender an, aber auf dem Fernseher erscheint nur die Login Geschichte auf tty1.

Hier das syslog.

Da gibt es einen ganzen Sack voll dieser Meldungen:

Code

Jan  6 09:09:02 yavdr06 nvidia-persistenced: Started (1355)

seahawk1986 · January 6, 2016 at 10:12 AM

Gibt es eine /run/nvidia-persistenced/nvidia-persistenced.pid ? Falls ja, lösch die mal.

Zoidson · January 6, 2016 at 10:21 AM

Die gibt es leider nicht:

Code

find / -name "*nvidia*pers*"
/etc/alternatives/x86_64-linux-gnu_nvidia_persistenced
/usr/lib/nvidia-352/bin/nvidia-persistenced
/usr/bin/nvidia-persistenced
/usr/bin/stop-nvidia-persistenced
/usr/bin/start-nvidia-persistenced
/usr/share/man/man1/nvidia-persistenced.1.gz
/usr/share/man/man1/alt-nvidia-352-persistenced.1.gz
/usr/share/doc/nvidia-352/html/nvidia-persistenced.html

perusmuro · January 6, 2016 at 1:16 PM

I have also this same problem.
0.6.0 and Nvidia card not recognize

Few days ago installation worked fine and also card not yesterday when made fresh installation problem started. I think this is something to do with updates?

gnapheus · January 6, 2016 at 2:04 PM

Hallo zusammen,

ich habe mich auch am yavdr-0.6.0 und es hat leider nicht funktioniert. Ich bekam kein Bild und wie Zoidson diese Meldungen.

Quote from Zoidson
Da gibt es einen ganzen Sack voll dieser Meldungen:
Code
Jan  6 09:09:02 yavdr06 nvidia-persistenced: Started (1355)

Da es sich um unseren einzigen Produktiv-VDR (siehe Signatur) handelt, konnte ich leider nicht weiter rumprobieren, woran es lag. Die Grafikkarte ist die
built-in Geforce 8200. Ist die Hardware vielleicht zu alt ??

LG

Joachim

seahawk1986 · January 6, 2016 at 2:12 PM

Ich bin nicht sicher, ob das bei dir die gleiche Ursache hat - bei der Geforce 8200 gab es einen Vorschlag für einen Workaround: 0.6.0: VDR stürzt kurz nach dem Start ab

Also älterer nVidia-Treiber aus der 304er Serie und eventuell (scheint nicht immer nötig zu sein) ein neuerer Kernel wie die Version 3.19 oder 4.2

gnapheus · January 6, 2016 at 2:26 PM

seahawk1986
Vielen Dank für den Link. Dann werde ich mal schauen, ob ich den VDR heute nochmal haben darf ...

Zoidson · January 9, 2016 at 11:53 PM

Nachdem ich perusmuro's Tipp aus diesem Thread ausprobiert habe, hatte ich auch Bild. Allerdings mit starker Klötzchenbildung auf HD Kanälen und ohne Ton.

Leider half auch der Tipp aus diesem Thread mit dem Anlegen der Datei /var/lib/vdr/plugins/pulsecontrol/startup.script mit dem Inhalt set-card-profile 0 output:hdmi-stereo nicht.

Irgendwie scheint da Pulseaudio nicht richtig zu laufen - auch im WFE taucht nichts von Pulseaudio auf. Das Menu dort sieht bei mir genauso aus wie bei 0.5. Ich vermute da ist noch was mit dem Treiber der Grafikkarte im argen. Leider kann ich im Moment auch nicht weiter testen, da morgen meine Frau aus ihrem Kurzurlaub zurück kommt und der VDR dann laufen muss!

Vielen Dank auf jeden Fall für die Hilfe!

wfaust · January 26, 2016 at 5:31 PM

Nur zur Info:

Ich weis nicht, inwieweit die Probleme mit 8200 auch auf 8300 zutreffen, aber auch ich hatte Probleme mit einem Asus M4N78 Pro MB. Zuerst schien der 304 die Lösung zu sein, doch ein glücklicher Umstand brachte mich auf eine andere Spur und bei mir scheint der 340 zu laufen, wenn ich in grub pci=nomsi benutze. Dies war bei bei älteren Kerneln die ich benutzt hatte nie nötig, doch bei 0.6 mit 3.13 kernel scheint es notwendig zu sein.

gnapheus · March 5, 2016 at 4:36 PM

@backalive
Vielen Dank! Mit pci=nomsi klappt die Installation jetzt auch auf meinem altem System mit built-in nvidia 8200 mit Standard Kernel und nvidia-Treiber 340. Das yavdr-0.6.1 Image hatte dagegen leider nicht geholfen.

Lg

Joachim

[0.6.0] VDR startet nach Installation nicht

Participate now!

Users Viewing This Thread