VDR startet auf genau einem Sender (N-TV HD) einfach neu

mini73 · December 4, 2015 at 9:08 AM

Genau das passiert da auch. Man muss sich in C nur selbst darum kümmern, dass der Speicher alloziert und auch wieder freigegeben wird. Was meinst du denn, wie die bash das intern macht?

Lars

crow · December 4, 2015 at 10:24 AM

Wie es aussieht wurde gestern VDR beendet wegen wachtdog wieso auch immer. Spät am Abend gab es aber schon einen crash leider ist etwas mit systemd passiert und der coredump wurde nicht geschrieben aber anbei paar Infos als Beweis das VDR gecrasht ist."

Display Spoiler

Code

Dec 03 22:06:29 alarmpi vdr[323]: [336] rpihddevice: new audio codec: 2ch AC3
Dec 03 22:06:29 alarmpi vdr[323]: [336] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 03 22:07:42 alarmpi vdr[323]: [1388] epg data writer thread started (pid=323, tid=1388, prio=low)
Dec 03 22:07:43 alarmpi vdr[323]: [1388] epg data writer thread ended (pid=323, tid=1388)
Dec 03 22:07:49 alarmpi vdr[323]: [336] rpihddevice: new audio codec: 2ch AC3
Dec 03 22:07:49 alarmpi vdr[323]: [336] rpihddevice: [libav] frame sync error
Dec 03 22:07:49 alarmpi vdr[323]: [336] rpihddevice: failed to decode audio frame!
Dec 03 22:07:49 alarmpi vdr[323]: [336] rpihddevice: new audio codec: 2ch AC3
Dec 03 22:07:49 alarmpi vdr[323]: [336] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 03 22:08:09 alarmpi vdr[323]: [336] rpihddevice: new audio codec: 2ch AC3
Dec 03 22:08:09 alarmpi vdr[323]: [336] rpihddevice: [libav] frame sync error
Dec 03 22:08:09 alarmpi vdr[323]: [336] rpihddevice: failed to decode audio frame!
Dec 03 22:08:09 alarmpi vdr[323]: [336] rpihddevice: new audio codec: 2ch AC3
Dec 03 22:08:09 alarmpi vdr[323]: [336] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 03 22:08:19 alarmpi vdr[323]: [336] rpihddevice: [libav] exponent out-of-range
Dec 03 22:08:19 alarmpi vdr[323]: [336] rpihddevice: [libav] error decoding the audio block
Dec 03 22:08:29 alarmpi vdr[323]: [336] rpihddevice: [libav] exponent out-of-range
Dec 03 22:08:29 alarmpi vdr[323]: [336] rpihddevice: [libav] error decoding the audio block
Dec 03 22:08:39 alarmpi vdr[323]: [336] rpihddevice: [libav] bandwidth code = 62 > 60
Dec 03 22:08:39 alarmpi vdr[323]: [336] rpihddevice: [libav] error decoding the audio block
Dec 03 22:08:49 alarmpi vdr[323]: [336] rpihddevice: [libav] frame sync error
Dec 03 22:08:49 alarmpi vdr[323]: [336] rpihddevice: failed to decode audio frame!
Dec 03 22:08:59 alarmpi vdr[323]: [336] rpihddevice: [libav] exponent out-of-range
Dec 03 22:08:59 alarmpi vdr[323]: [336] rpihddevice: [libav] error decoding the audio block
Dec 03 22:09:09 alarmpi vdr[323]: [336] rpihddevice: new audio codec: 2ch AC3
Dec 03 22:09:09 alarmpi vdr[323]: [336] rpihddevice: [libav] frame sync error
Dec 03 22:09:09 alarmpi vdr[323]: [336] rpihddevice: failed to decode audio frame!
Dec 03 22:09:09 alarmpi vdr[323]: [336] rpihddevice: new audio codec: 2ch AC3
Dec 03 22:09:09 alarmpi vdr[323]: [336] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 03 22:09:59 alarmpi vdr[323]: [336] rpihddevice: [libav] frame sync error
Dec 03 22:09:59 alarmpi vdr[323]: [336] rpihddevice: failed to decode audio frame!
Dec 03 22:10:19 alarmpi vdr[323]: [336] rpihddevice: new audio codec: 2ch AC3
Dec 03 22:10:19 alarmpi vdr[323]: [336] rpihddevice: [libav] frame sync error
Dec 03 22:10:19 alarmpi vdr[323]: [336] rpihddevice: failed to decode audio frame!
Dec 03 22:10:19 alarmpi vdr[323]: [336] rpihddevice: new audio codec: 2ch AC3
Dec 03 22:10:19 alarmpi vdr[323]: [336] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 03 22:10:39 alarmpi vdr[323]: [336] rpihddevice: [libav] frame sync error
Dec 03 22:10:39 alarmpi vdr[323]: [336] rpihddevice: failed to decode audio frame!
Dec 03 22:10:59 alarmpi vdr[323]: [336] rpihddevice: [libav] error in bit allocation
Dec 03 22:10:59 alarmpi vdr[323]: [336] rpihddevice: [libav] error decoding the audio block
Dec 03 22:11:19 alarmpi vdr[323]: [336] rpihddevice: new audio codec: 2ch AC3
Dec 03 22:11:19 alarmpi vdr[323]: [336] rpihddevice: [libav] invalid sample rate
Dec 03 22:11:19 alarmpi vdr[323]: [336] rpihddevice: failed to set audio render pcm parameters!
Dec 03 22:11:19 alarmpi vdr[323]: [336] rpihddevice: set HDMI audio output format to 2ch PCM, 0.0kHz
Dec 03 22:11:45 alarmpi systemd-coredump[1438]: Process 323 (vdr) of user 666 dumped core.
Dec 03 22:11:45 alarmpi systemd[1]: vdr.service: Main process exited, code=killed, status=8/FPE
Dec 03 22:11:46 alarmpi vdr[1445]: [1445] VDR version 2.2.0 started
Dec 03 22:11:45 alarmpi systemd[1]: vdr.service: Unit entered failed state.
Dec 03 22:11:46 alarmpi vdr[1445]: [1445] switched to user 'vdr'
Dec 03 22:11:45 alarmpi systemd[1]: vdr.service: Failed with result 'signal'.
Dec 03 22:11:46 alarmpi vdr[1445]: [1445] codeset is 'UTF-8' - known
Dec 03 22:11:46 alarmpi systemd[1]: vdr.service: Service hold-off time over, scheduling restart.
Dec 03 22:11:46 alarmpi vdr[1445]: [1445] override character table is 'ISO-8859-15'
Dec 03 22:11:46 alarmpi systemd[1]: Stopped Video Disk Recorder.








$ sudo coredumpctl
TIME                            PID   UID   GID SIG PRESENT EXE
Sat 2015-11-28 16:52:38 CET     220     0     0  11   /opt/bin/mediasrv
Sat 2015-11-28 17:46:14 CET     217     0     0  11   /opt/bin/mediasrv
Sun 2015-11-29 11:02:56 CET     207     0     0  11   /opt/bin/mediasrv
Sun 2015-11-29 12:44:11 CET     213     0     0  11   /opt/bin/mediasrv
Thu 2015-12-03 22:11:45 CET     323   666   666   8   /usr/bin/vdr
[crow@alarmpi ~]$ sudo coredumpctl gdb 323
           PID: 323 (vdr)
           UID: 666 (vdr)
           GID: 666 (vdr)
        Signal: 8 (FPE)
     Timestamp: Thu 2015-12-03 22:11:19 CET (12h ago)
  Command Line: /usr/bin/vdr
    Executable: /usr/bin/vdr
 Control Group: /system.slice/vdr.service
          Unit: vdr.service
         Slice: system.slice
       Boot ID: 7f86927520a646adac2afa11a7720d36
    Machine ID: 84dadb5e3d8a4370ae51d251350c4943
      Hostname: alarmpi
       Message: Process 323 (vdr) of user 666 dumped core.


Cannot retrieve coredump from journal nor disk.
Failed to retrieve core: No such file or directory
$
$ sudo ls /var/lib/systemd/coredump/
$

Display More

mini73 · December 4, 2015 at 10:48 AM

Hm, ohne Backtrace ist das natürlich schwer zu sagen, woran es liegt.
Am Wochenende baue ich noch den fehlenden overflow-check ein, mal sehen, ob es dann besser ist.

Lars.

crow · December 4, 2015 at 11:35 AM

Man sieht auch das CPU Load von den verschlüsselten Sendern noch immer hoch ist aber viellecht spür ich das weniger:

Code

PID USER      PR  NI    VIRT    RES %CPU %MEM     TIME+ S COMMAND
 4483 vdr       20   0  253.1m  54.3m 29.1  7.4  16:52.33 R device 1 receiv

mini73 · December 4, 2015 at 1:25 PM

Setze mal CAID_BUFSIZE im Patch auf 1024 und beobachte dann die Auslastung.

Lars.

crow · December 4, 2015 at 3:14 PM

Das wurde schon gesetzt bzw. 1025 (schreib Fehler), stört das? Diese Meldung kommt nicht mehr "DEBUG: buffer for ca-descriptors too small (512, needed 529) " aber CPU Auslastung ist noch da. Und beim Umschalten (ab und zu) verabschiedet sich VDR (PANIC: watchdog timer expired - exiting!)

Code

+#define CAID_BUFSIZE 1025

mini73 · December 4, 2015 at 3:47 PM

Die Größe selbst ist fast egal, vorzugsweise nimmt man Zweierpotenzen. Probier's doch mal mit 1024.
Ist die Auslastung auch auf anderen Sendern? Wenn ja, auch ohne den Patch?

Lars.

mini73 · December 5, 2015 at 2:31 PM

Moin!

Anbei der aktualisierte Patch mit Standard-Buffersize von 1024, richtigem Vergleich und zusätzlich overflow-check.
Bitte testen.

Lars.

Neo68x · December 5, 2015 at 2:43 PM

Lars: Vielen Dank!

Werde aber voraussichtlich erst heute Abend bzw. morgen zum Testen kommen.

Gruß
Neo

mini73 · December 5, 2015 at 2:50 PM

Keine Eile.

Lars.

crow · December 5, 2015 at 3:53 PM

Schaut gut aus. Anbei startlog (log von dvbxxx wurde auf 0 gestellt damit ich hier nichts korigieren muss). Derwhile keine crash video/audio ohne artefects und im sync.

PS: ich habe neue microsd karte für meine RPI2 genommen und archlinuxarm neue installiert, hab gefühl gehabt das alte microsd karte defekt ist.

Display Spoiler

Code

Dec 05 15:45:13 alarmpi vdr[6582]: [6582] connect from 127.0.0.1, port 56235 - accepted
Dec 05 15:45:13 alarmpi vdr[6582]: [6582] switching to channel 30 (n-tv HD)
Dec 05 15:45:13 alarmpi vdr[6582]: [cecremote] Primary device, Channel Switch 0 t
Dec 05 15:45:13 alarmpi vdr[6582]: [6582] CAM 1: assigned to device 1
Dec 05 15:45:13 alarmpi vdr[6582]: [cecremote] Not primary device, Channel Switch 0 f
Dec 05 15:45:13 alarmpi vdr[6582]: [cecremote] Not primary device, Channel Switch 30 f
Dec 05 15:45:13 alarmpi vdr[6582]: [6608] device 1 TS buffer thread ended (pid=6582, tid=6608)
Dec 05 15:45:13 alarmpi vdr[6582]: [6607] buffer stats: 174088 (3%) used
Dec 05 15:45:13 alarmpi vdr[6582]: [6607] device 1 receiver thread ended (pid=6582, tid=6607)
Dec 05 15:45:13 alarmpi vdr[6582]: [6612] device 1 receiver thread started (pid=6582, tid=6612, prio=high)
Dec 05 15:45:13 alarmpi vdr[6582]: [cecremote] Primary device, Channel Switch 30 t
Dec 05 15:45:13 alarmpi vdr[6582]: [cecremote]   TV    : n-tv HD
Dec 05 15:45:13 alarmpi vdr[6582]: [6613] device 1 TS buffer thread started (pid=6582, tid=6613, prio=high)
Dec 05 15:45:13 alarmpi vdr[6582]: [6582] closing SVDRP connection
Dec 05 15:45:13 alarmpi vdr[6582]: [6597] rpihddevice: new audio codec: 2ch MPEG
Dec 05 15:45:13 alarmpi vdr[6582]: [6597] rpihddevice: [libav] Header missing
Dec 05 15:45:13 alarmpi vdr[6582]: [6597] rpihddevice: failed to decode audio frame!
Dec 05 15:45:14 alarmpi vdr[6582]: [6582] retuning due to modification of channel 30 (n-tv HD)
Dec 05 15:45:15 alarmpi vdr[6582]: [6582] switching to channel 30 (n-tv HD)
Dec 05 15:45:15 alarmpi vdr[6582]: [6582] CAM 1: unassigned
Dec 05 15:45:15 alarmpi vdr[6582]: [cecremote] Primary device, Channel Switch 0 t
Dec 05 15:45:15 alarmpi vdr[6582]: [6582] CAM 1: assigned to device 1
Dec 05 15:45:15 alarmpi vdr[6582]: [cecremote] Not primary device, Channel Switch 0 f
Dec 05 15:45:15 alarmpi vdr[6582]: [6613] device 1 TS buffer thread ended (pid=6582, tid=6613)
Dec 05 15:45:15 alarmpi vdr[6582]: [cecremote] Not primary device, Channel Switch 30 f
Dec 05 15:45:15 alarmpi vdr[6582]: [6612] buffer stats: 96820 (1%) used
Dec 05 15:45:15 alarmpi vdr[6582]: [6612] device 1 receiver thread ended (pid=6582, tid=6612)
Dec 05 15:45:15 alarmpi vdr[6582]: [6614] device 1 receiver thread started (pid=6582, tid=6614, prio=high)
Dec 05 15:45:15 alarmpi vdr[6582]: [cecremote] Primary device, Channel Switch 30 t
Dec 05 15:45:15 alarmpi vdr[6582]: [cecremote]   TV    : n-tv HD
Dec 05 15:45:15 alarmpi vdr[6582]: [6615] device 1 TS buffer thread started (pid=6582, tid=6615, prio=high)
Dec 05 15:45:16 alarmpi vdr[6582]: [6614] rpihddevice: set video codec to H264
Dec 05 15:45:16 alarmpi vdr[6582]: [6597] rpihddevice: new audio codec: 2ch AC3
Dec 05 15:45:16 alarmpi vdr[6582]: [6597] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 15:45:17 alarmpi vdr[6582]: [6596] rpihddevice: video stream started 1920x1080@50i
Dec 05 15:49:24 alarmpi vdr[6582]: [6673] epg data writer thread started (pid=6582, tid=6673, prio=low)
Dec 05 15:49:24 alarmpi vdr[6582]: [6673] epg data writer thread ended (pid=6582, tid=6673)

Display More

CPU Auslastung auf dem verschüsseltem Sender:

n-TV HD:

Code

PID USER      PR  NI    VIRT    RES  %CPU %MEM     TIME+ S COMMAND            
 6582 vdr       20   0  249,4m  42,4m  61,3  5,8   7:17.84 S vdr

Servus HD FTA:

Code

PID USER      PR  NI    VIRT    RES  %CPU %MEM     TIME+ S COMMAND            
 6582 vdr       20   0  249,4m  42,4m  14,8  5,8  22:03.10 S vdr

MegaV0lt · December 5, 2015 at 4:18 PM

v2 ist nun drauf:

Code

Dec 05 16:15:51 [vdr] [15360] switching to channel 93 (n-tv HD)
Dec 05 16:15:51 [vdr] [15360] [softhddev]SetPlayMode: 0_
Dec 05 16:15:51 [vdr] [15360] [softhddev]SetVideoDisplayFormat: 0_
Dec 05 16:15:51 [vdr] [15360] [softhddev]GetSpuDecoder:_
Dec 05 16:15:51 [vdr] [16055] osdteletext-receiver thread ended (pid=15360, tid=16055)
Dec 05 16:15:51 [vdr] [15360] buffer stats: 0 (0%) used
Dec 05 16:15:51 [vdr] video: decoder buffer empty, duping frame (28/20370) 0 v-buf_
Dec 05 16:15:51 [vdr] video: --:--:--.---   +0	0   0/\ms   0-1+4 v-buf_
Dec 05 16:15:51 [vdr] audio/alsa: using device 'hw:NVidia,7'_
Dec 05 16:15:51 [vdr] [15360] CAM 1: assigned to device 1
Dec 05 16:15:51 [vdr] [15360] DV***I: 0.0 set CAM decrypt (SID 61204 (0xEF14), caLm 4, HasCaDescriptors 1)
Dec 05 16:15:51 [vdr] [16056] device 1 TS buffer thread ended (pid=15360, tid=16056)
Dec 05 16:15:51 [vdr] [16054] buffer stats: 110732 (2%) used
Dec 05 16:15:51 [vdr] [16054] device 1 receiver thread ended (pid=15360, tid=16054)
Dec 05 16:15:51 [vdr] audio/alsa: start delay 336ms_
Dec 05 16:15:51 [vdr] [19413] device 1 receiver thread started (pid=15360, tid=19413, prio=high)
Dec 05 16:15:51 [vdr] [15360] creating directory /tmp/osdteletext/S19.2E-1-1057-61204
Dec 05 16:15:51 [vdr] [19414] osdteletext-receiver thread started (pid=15360, tid=19414, prio=high)
Dec 05 16:15:51 [vdr] [19415] device 1 TS buffer thread started (pid=15360, tid=19415, prio=high)
Dec 05 16:15:51 [vdr] [15360] [softhddev]SetPlayMode: 1_
Dec 05 16:15:52 [vdr] audio/alsa: using device 'hw:NVidia,7'_
Dec 05 16:15:52 [vdr] [softhddev] invalid PES video packet_
Dec 05 16:15:52 [vdr] audio/alsa: start delay 336ms_
Dec 05 16:15:52 [vdr] [softhddev] 9 invalid PES video packet(s)_
Dec 05 16:15:52 [vdr] audio/alsa: using pass-through device 'hw:NVidia,7'_
Dec 05 16:15:52 [vdr] audio/alsa: start delay 336ms_
Dec 05 16:15:53 [vdr] codec/video: ffmpeg/libav buggy: width or height zero_
            	- Last output repeated twice -
Dec 05 16:15:53 [vdr] video/vdpau: missed frame (1/4)_
Dec 05 16:15:53 [vdr] video/vdpau: missed frame (2/14)_
Dec 05 16:15:53 [vdr] video: decoder buffer empty, duping frame (29/14) 0 v-buf_
Dec 05 16:15:53 [vdr] video:  3:38:57.341+8888	0   0/\ms   0+5+4 v-buf_
Dec 05 16:15:53 [vdr] video: decoder buffer empty, duping frame (31/14) 0 v-buf_
Dec 05 16:15:53 [vdr] video/vdpau: missed frame (3/18)_
Dec 05 16:15:54 [vdr] video: slow down video, duping frame_
Dec 05 16:15:54 [vdr] video:  3:38:57.521+1027  410   0/\ms   4+8+4 v-buf_

Display More

Bild OK.

top (1 mal livetv ntv-hd):

Code

top - 16:18:13 up 17 min,  1 user,  load average: 0.55, 1.52, 1.53
Tasks: 133 total,   1 running, 132 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.8 us,  4.3 sy,  7.0 ni, 87.7 id,  0.0 wa,  0.0 hi,  0.2 si,  0.0 st
KiB Mem:   4050852 total,  1636396 used,  2414456 free,	57756 buffers
KiB Swap:  3999740 total,    	0 used,  3999740 free.   613160 cached Mem


  PID USER  	PR  NI	VIRT	RES	SHR S  %CPU %MEM 	TIME+ COMMAND
15360 root  	39  19 2025024 351084  58332 S  16.3  8.7   6:31.29 vdr

crow · December 5, 2015 at 5:52 PM

Artefects auf OxF. Ja da war etwas mit Sundtek karte aber erst viel nacher.

Code

http://dpaste.com/1W7DDBE

Edit #1:
Hier ist nichts zu sehen von DVB Karte im dmesg aber trotzdem artefect:

Display Spoiler

Code

Dec 05 19:55:22 alarmpi vdr[10267]: [15894] epg data writer thread started (pid=10267, tid=15894, prio=low)
Dec 05 19:55:22 alarmpi vdr[10267]: [15894] epg data writer thread ended (pid=10267, tid=15894)
Dec 05 19:56:56 alarmpi vdr[10267]: [10282] rpihddevice: [libav] frame sync error
Dec 05 19:56:56 alarmpi vdr[10267]: [10282] rpihddevice: failed to decode audio frame!
Dec 05 20:05:06 alarmpi vdr[10267]: [10282] rpihddevice: [libav] frame sync error
Dec 05 20:05:06 alarmpi vdr[10267]: [10282] rpihddevice: failed to decode audio frame!
Dec 05 20:05:09 alarmpi vdr[10267]: [10282] rpihddevice: new audio codec: 2ch MPEG
Dec 05 20:05:09 alarmpi vdr[10267]: [10282] rpihddevice: [libav] Header missing
Dec 05 20:05:09 alarmpi vdr[10267]: [10282] rpihddevice: failed to decode audio frame!
Dec 05 20:05:12 alarmpi vdr[10267]: [10282] rpihddevice: [libav] Header missing
Dec 05 20:05:12 alarmpi vdr[10267]: [10282] rpihddevice: failed to decode audio frame!
Dec 05 20:05:16 alarmpi vdr[10267]: [10282] rpihddevice: new audio codec: 3ch AAC
Dec 05 20:05:16 alarmpi vdr[10267]: [10282] rpihddevice: failed to decode audio frame!
Dec 05 20:05:16 alarmpi vdr[10267]: [10282] rpihddevice: new audio codec: 6ch AC3
Dec 05 20:05:16 alarmpi vdr[10267]: [10282] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 20:05:23 alarmpi vdr[10267]: [16020] epg data writer thread started (pid=10267, tid=16020, prio=low)
Dec 05 20:05:23 alarmpi vdr[10267]: [16020] epg data writer thread ended (pid=10267, tid=16020)
Dec 05 20:06:26 alarmpi vdr[10267]: [10282] rpihddevice: new audio codec: 2ch AAC
Dec 05 20:06:26 alarmpi vdr[10267]: [10282] rpihddevice: failed to decode audio frame!
Dec 05 20:06:26 alarmpi vdr[10267]: [10282] rpihddevice: new audio codec: 6ch AC3
Dec 05 20:06:26 alarmpi vdr[10267]: [10282] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 20:06:46 alarmpi vdr[10267]: [10282] rpihddevice: new audio codec: 2ch MPEG
Dec 05 20:06:46 alarmpi vdr[10267]: [10282] rpihddevice: [libav] Header missing
Dec 05 20:06:46 alarmpi vdr[10267]: [10282] rpihddevice: failed to decode audio frame!
Dec 05 20:06:46 alarmpi vdr[10267]: [10282] rpihddevice: new audio codec: 6ch AC3
Dec 05 20:06:46 alarmpi vdr[10267]: [10282] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 20:12:46 alarmpi vdr[10267]: [10282] rpihddevice: [libav] frame sync error
Dec 05 20:12:46 alarmpi vdr[10267]: [10282] rpihddevice: failed to decode audio frame!
Dec 05 20:14:56 alarmpi vdr[10267]: [10282] rpihddevice: [libav] exponent out-of-range
Dec 05 20:14:56 alarmpi vdr[10267]: [10282] rpihddevice: [libav] error decoding the audio block
Dec 05 20:15:16 alarmpi vdr[10267]: [10282] rpihddevice: [libav] frame sync error
Dec 05 20:15:16 alarmpi vdr[10267]: [10282] rpihddevice: failed to decode audio frame!
Dec 05 20:15:24 alarmpi vdr[10267]: [16147] epg data writer thread started (pid=10267, tid=16147, prio=low)
Dec 05 20:15:25 alarmpi vdr[10267]: [16147] epg data writer thread ended (pid=10267, tid=16147)
Dec 05 20:25:25 alarmpi vdr[10267]: [16272] epg data writer thread started (pid=10267, tid=16272, prio=low)
Dec 05 20:25:25 alarmpi vdr[10267]: [16272] epg data writer thread ended (pid=10267, tid=16272)
Dec 05 20:28:36 alarmpi vdr[10267]: [10282] rpihddevice: [libav] frame sync error
Dec 05 20:28:36 alarmpi vdr[10267]: [10282] rpihddevice: failed to decode audio frame!
Dec 05 20:29:42 alarmpi vdr[10267]: [14660] ERROR: TS packet not accepted in Transfer Mode
Dec 05 20:29:42 alarmpi vdr[10267]: [10282] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 20:29:46 alarmpi vdr[10267]: [14660] ERROR: TS packet not accepted in Transfer Mode
Dec 05 20:29:46 alarmpi vdr[10267]: [10282] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 20:29:51 alarmpi vdr[10267]: [14660] ERROR: TS packet not accepted in Transfer Mode
Dec 05 20:29:51 alarmpi vdr[10267]: [10282] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 20:29:54 alarmpi vdr[10267]: [14660] ERROR: TS packet not accepted in Transfer Mode
Dec 05 20:29:54 alarmpi vdr[10267]: [10282] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 20:29:59 alarmpi vdr[10267]: [14660] ERROR: TS packet not accepted in Transfer Mode
Dec 05 20:29:59 alarmpi vdr[10267]: [10282] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 20:30:03 alarmpi vdr[10267]: [14660] ERROR: TS packet not accepted in Transfer Mode
Dec 05 20:30:03 alarmpi vdr[10267]: [10282] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 20:30:07 alarmpi vdr[10267]: [14660] ERROR: TS packet not accepted in Transfer Mode
Dec 05 20:30:07 alarmpi vdr[10267]: [10282] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 20:30:09 alarmpi vdr[10267]: [10280] rpihddevice: OmxError(StreamCorrupt)
Dec 05 20:30:11 alarmpi vdr[10267]: [14660] ERROR: TS packet not accepted in Transfer Mode
Dec 05 20:30:11 alarmpi vdr[10267]: [10282] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 20:30:15 alarmpi vdr[10267]: [14660] ERROR: TS packet not accepted in Transfer Mode
Dec 05 20:30:15 alarmpi vdr[10267]: [10282] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 20:30:19 alarmpi vdr[10267]: [14660] ERROR: TS packet not accepted in Transfer Mode
Dec 05 20:30:19 alarmpi vdr[10267]: [10282] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Dec 05 20:30:23 alarmpi vdr[10267]: [14660] ERROR: TS packet not accepted in Transfer Mode

Display More

mini73 · December 6, 2015 at 11:44 AM

Ich vermute, irgendwas geht da bei der Entschlüsselung schief, jedenfalls scheint der Stream nicht ganz in Ordnung zu sein. Aber da kann ich leider nicht helfen.

Lars

crow · December 6, 2015 at 11:54 AM

Ich noch weniger :(. Wenn die letzte Posts von mir OT waren dann soll bitte das ein Moderator auslagern. Letzte patch bring video/audio wieder da und VDR crash nicht. Werde noch n-TV HD damit testen und berichten.

PS: im rpihddevice thread habe ich ein crashdump gepostet, beim stopen von VDR.

Falk · December 6, 2015 at 8:13 PM

Bei mir sieht der Patch gut aus. VDR läuft wieder stabil und schaltet sauber - auch ntv hd.
OxF habe ich noch nicht geprüft. Falls es Probleme geben sollte melde ich mich gerne wieder.
Bis dahin ein dickes Dankeschön!

utiltiy · December 7, 2015 at 6:07 AM

Wenn man den Patch von Lars mit dem für das Horizontale Menü für Skindesigner verwendet raucht der VDR ab beim öffnen des Menü's.

mini73 · December 7, 2015 at 8:56 AM

Backtrace? Ich hab zwar keine Ahnung, wie diese Stelle Einfluss auf den Skindesigner hat, aber hat der evtl. auch einen Buffer für CA-IDs, der zu klein ist?

Lars

crow · December 7, 2015 at 9:24 AM

Quote from utiltiy

Wenn man den Patch von Lars mit dem für das Horizontale Menü für Skindesigner verwendet raucht der VDR ab beim öffnen des Menü's.

Hast link für den Patch? Hier auf meine RPI2 benutzte ich "noch nicht" skindesigner.

utiltiy · December 7, 2015 at 9:45 AM

Ist im Skindesigner GIT in "patches" zu finden

Participate now!