Hi,
wie div.male hier beschrieben nutzen wir die NUC-Lösung und Entwicklen dort weiter.
Unsere Zeit reicht leider für die NVISIA-Baustelle nicht aus.
Wir übernehmen gerne die Ergbnisse weiterhin in das Image ![:]](https://www.vdr-portal.de/images/smilies/pleased.gif "Freude"){kind=small}
Danke für das Angebot, aber wir verzichten.
Grüße
cinfo
Hi cinfo.
Das ist schade. In Post 64 wollte ich als Linux Noob schon die Finger davon lassen ... dann dein HInweis:
Wenn Du Deine Entscheidungen von Dritten abhängig machst und nichts zur Weiterentwicklung beitragen möchtest, dann solltest Du diese Entscheidung mit der NVIDIA -Lösung überdenken.
wenn die Karte im Board und unter Linux gefunden wird gibt es da keine so großen Probleme und man kann nach den Lösungen wie hier beschrieben vorgehen.
wichtig wäre nur das die AVG 2GB RAM hat
Zaubern kann ich auch nicht wenn es mit dem Board Probleme gibt
Mir war das jedenfalls bis Post 100 (nach dem Kauf, nach der Installation) nicht klar, denn so hätte ich das Experiment gar nicht erst begonnen 
.
Macht doch bitte auf der Homepage einen Hinweis, dass
1 Kodi auf AVGs ohne Graka nicht videofähig ist und
2 Grakas hier im Forum keinen Dev.support bekommen aber Ergebnisse eingebunden werden
Danke jedenfalls für den bisherigen Support dazu .... ev kommt ja noch ein bisschen mehr davon 
Aktuell habe ich keinen Ton über Nvidia bei mp3, Firefox,...
Stelle ich mit dem pulse-audio Lautärkenregler auf Nvidia um geht zumindest Kodi aber auch mit Probs:
Beim Starten und stoppen eine Films wird immer wieder die Soundkarte geändert (obwohl in den Kodi Einstellungen Nvisia HMDI 5 KAnal engestellt ist). Dann muss mann während der Film läuft wieder über den Pulseauidio-Lautstärkeregle umstellen...
Ergänzen möchte ich noch, dass ich bisher auch in Kodi immer nur PCM5.1 und kein DD5.1 Bitstream habe .... how come ?
Ist dei Meldung "No input driver specified, ignoring this device." im xorg.log Teil des Prob ? WELCHE TREIBER WÄREN DENN DAS ?
[ 48.475] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 48.475] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 48.475] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[ 48.475] (II) No input driver specified, ignoring this device.
[ 48.475] (II) This device may have been added with another device file.
[ 48.478] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[ 48.478] (II) No input driver specified, ignoring this device.Infolgendem Pulseaudio file (pactl list) steht, dass Karte 0 (nvidia) mit einem Intel Treiber bedient wir .. ist das OK ? Fällt da sonst was auf ?
Karte #0
Name: alsa_card.pci-0000_01_00.1
Treiber: module-alsa-card.c
Owner-Modul: 20
Eigenschaften:
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xdfc7c000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0e0f"
device.string = "0"
device.description = "HDA NVidia"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"Modul #0
Name: module-device-restore
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "4.0"
Modul #1
Name: module-stream-restore
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "4.0"
Modul #2
Name: module-card-restore
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "4.0"
Modul #3
Name: module-augment-properties
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "4.0"
Modul #4
Name: module-switch-on-port-available
Argument:
Nutzungszähler: k. A.
Eigenschaften:
Modul #5
Name: module-udev-detect
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "4.0"
Modul #6
Name: module-bluetooth-policy
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Frédéric Dalleau"
module.description = "When a bluetooth sink or source is added, load module-loopback"
module.version = "4.0"
Modul #7
Name: module-bluetooth-discover
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
module.version = "4.0"
Modul #8
Name: module-native-protocol-unix
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "4.0"
Modul #9
Name: module-gconf
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "GConf Adapter"
module.version = "4.0"
Modul #10
Name: module-default-device-restore
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "4.0"
Modul #11
Name: module-rescue-streams
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
module.version = "4.0"
Modul #13
Name: module-always-sink
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Colin Guthrie"
module.description = "Hält stets einen Sink geladen, selbst wenn dies ein Null-Sink ist"
module.version = "4.0"
Modul #14
Name: module-intended-roles
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based of intended roles of devices"
module.version = "4.0"
Modul #15
Name: module-suspend-on-idle
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "4.0"
Modul #16
Name: module-systemd-login
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "4.0"
Modul #17
Name: module-position-event-sounds
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending
on the position on screen of the widget triggering them."
module.version = "4.0"
Modul #18
Name: module-filter-heuristics
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "4.0"
Modul #19
Name: module-filter-apply
Argument:
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "4.0"
Modul #20
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_01_00.1"
card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Nutzungszähler: 0
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "4.0"
Modul #21
Name: module-alsa-card
Argument: device_id="1" name="pci-0000_00_1b.0"
card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Nutzungszähler: 0
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "4.0"
Modul #22
Name: module-x11-publish
Argument: display=:0
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "4.0"
Modul #23
Name: module-x11-bell
Argument: display=:0 sample=bell.ogg
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "X11 bell interceptor"
module.version = "4.0"
Modul #24
Name: module-x11-cork-request
Argument: display=:0
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when cork/uncork is requested"
module.version = "4.0"
Modul #25
Name: module-x11-xsmp
Argument: display=:0 session_manager=local/BM2LTSR66RBex:@/tmp/.ICE-unix/11345,unix/BM2LTSR66RBex:/tmp/.ICE-unix/11345
Nutzungszähler: k. A.
Eigenschaften:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "4.0"
Sink #1
Status: SUSPENDED
Name: alsa_output.pci-0000_01_00.1.hdmi-surround-extra1
Beschreibung: HDA NVidia Digital Surround 5.1 (HDMI)
Treiber: module-alsa-card.c
Sample-Angabe: s16le 6ch 44100Hz
Kanalzuordnung: front-left,front-right,rear-left,rear-right,front-center,lfe
Besitzermodul: 20
Stumm: no
Lautstärke: 0: 100% 1: 100% 2: 100% 3: 100% 4: 100% 5: 100%
0: 0,00 dB 1: 0,00 dB 2: 0,00 dB 3: 0,00 dB 4: 0,00 dB 5: 0,00 dB
Verteilung 0,00
Basislautstärke: 100%
0,00 dB
Quellenüberwachung: alsa_output.pci-0000_01_00.1.hdmi-surround-extra1.monitor
Latenz: 0 usec, eingestellt 0 usec
Merkmale: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Eigenschaften:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 1"
alsa.id = "HDMI 1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "7"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xdfc7c000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0e0f"
device.string = "hdmi:0,1"
device.buffering.buffer_size = "65280"
device.buffering.fragment_size = "32640"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-surround-extra1"
device.profile.description = "Digital Surround 5.1 (HDMI)"
device.description = "HDA NVidia Digital Surround 5.1 (HDMI)"
alsa.mixer_name = "Nvidia GPU 51 HDMI/DP"
alsa.components = "HDA:10de0051,14628c90,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profile:
hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, available)
Aktive Profile: hdmi-output-1
Formate:
pcm
Quelle #1
Status: SUSPENDED
Name: alsa_output.pci-0000_01_00.1.hdmi-surround-extra1.monitor
Beschreibung: Monitor of HDA NVidia Digital Surround 5.1 (HDMI)
Treiber: module-alsa-card.c
Sample-Angabe: s16le 6ch 44100Hz
Kanalzuordnung: front-left,front-right,rear-left,rear-right,front-center,lfe
Besitzer-Modul: 20
Stumm: no
Lautstärke: 0: 100% 1: 100% 2: 100% 3: 100% 4: 100% 5: 100%
0: 0,00 dB 1: 0,00 dB 2: 0,00 dB 3: 0,00 dB 4: 0,00 dB 5: 0,00 dB
Verteilung 0,00
Basis-Lautstärke: 100%
0,00 dB
Sink-Monitor: alsa_output.pci-0000_01_00.1.hdmi-surround-extra1
Latenz: 0 usec, eingestellt 0 usec
Flags: DECIBEL_VOLUME LATENCY
Eigenschaften:
device.description = "Monitor of HDA NVidia Digital Surround 5.1 (HDMI)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xdfc7c000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0e0f"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formate:
pcm
Client #0
Treiber: module-systemd-login.c
Owner-Modul: 16
Eigenschaften:
application.name = "Login Session 4"
systemd-login.session = "4"
Client #8
Treiber: module-systemd-login.c
Owner-Modul: 16
Eigenschaften:
application.name = "Login Session c2"
systemd-login.session = "c2"
Client #9
Treiber: protocol-native.c
Owner-Modul: 8
Eigenschaften:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "1.0"
application.process.id = "11338"
application.process.user = "reel"
application.process.host = "BM2LTSR66RBex"
application.process.binary = "unity-settings-daemon"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "9d4a8c8c656eac7a47a2918254672921"
application.process.session_id = "c2"
Client #13
Treiber: protocol-native.c
Owner-Modul: 8
Eigenschaften:
application.name = "Ubuntu Audio Settings"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "com.canonical.settings.sound"
application.icon_name = "multimedia-volume-control"
application.version = "0.1"
application.process.id = "11475"
application.process.user = "reel"
application.process.host = "BM2LTSR66RBex"
application.process.binary = "indicator-sound-service"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "9d4a8c8c656eac7a47a2918254672921"
application.process.session_id = "c2"
Client #15
Treiber: module-x11-xsmp.c
Owner-Modul: 25
Eigenschaften:
application.name = "XSMP Session on gnome-session as 10c9f9143d38f6725145287190425525400000113450054"
xsmp.vendor = "gnome-session"
xsmp.client.id = "10c9f9143d38f6725145287190425525400000113450054"
Client #16
Treiber: protocol-native.c
Owner-Modul: 8
Eigenschaften:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "13455"
application.process.user = "reel"
application.process.host = "BM2LTSR66RBex"
application.process.binary = "pactl"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "9d4a8c8c656eac7a47a2918254672921"
application.process.session_id = "c2"
Karte #0
Name: alsa_card.pci-0000_01_00.1
Treiber: module-alsa-card.c
Owner-Modul: 20
Eigenschaften:
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xdfc7c000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0e0f"
device.string = "0"
device.description = "HDA NVidia"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profile:
output:hdmi-stereo: Digital Stereo (HDMI) Ausgang (sinks: 1, sources: 0, priority. 5400)
output:hdmi-stereo-extra1: Digital Stereo (HDMI) Ausgang (sinks: 1, sources: 0, priority. 5200)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI) Ausgang (sinks: 1, sources: 0, priority. 100)
off: Aus (sinks: 0, sources: 0, priority. 0)
Aktive Profile: output:hdmi-surround-extra1
Profile:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, available)
Eigenschaften:
device.icon_name = "video-display"
device.product.name = "SONY TV XV
"
Teil des Profils/der Profile: output:hdmi-stereo
hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, latency offset: 0 usec, available)
Eigenschaften:
device.icon_name = "video-display"
device.product.name = "DSP-Z7
"
Teil des Profils/der Profile: output:hdmi-stereo-extra1, output:hdmi-surround-extra1
Karte #1
Name: alsa_card.pci-0000_00_1b.0
Treiber: module-alsa-card.c
Owner-Modul: 21
Eigenschaften:
alsa.card = "1"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xddffc000 irq 47"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "27d8"
device.product.name = "NM10/ICH7 Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "1"
device.description = "Internes Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profile:
input:analog-stereo: Analog Stereo Eingang (sinks: 0, sources: 1, priority. 60)
input:iec958-stereo: Digital Stereo (IEC958) Eingang (sinks: 0, sources: 1, priority. 55)
output:analog-stereo: Analog Stereo Ausgang (sinks: 1, sources: 0, priority. 6000)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority. 6060)
output:analog-stereo+input:iec958-stereo: Analog Stereo Ausgang +
Digital Stereo (IEC958) Eingang (sinks: 1, sources: 1, priority. 6055)
output:analog-surround-40: Analog Surround 4.0 Ausgang (sinks: 1, sources: 0, priority. 700)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0
Ausgang + Analog Stereo Eingang (sinks: 1, sources: 1, priority. 760)
output:analog-surround-40+input:iec958-stereo: Analog Surround 4.0
Ausgang + Digital Stereo (IEC958) Eingang (sinks: 1, sources: 1,
priority. 755)
output:analog-surround-41: Analog Surround 4.1 Ausgang (sinks: 1, sources: 0, priority. 800)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1
Ausgang + Analog Stereo Eingang (sinks: 1, sources: 1, priority. 860)
output:analog-surround-41+input:iec958-stereo: Analog Surround 4.1
Ausgang + Digital Stereo (IEC958) Eingang (sinks: 1, sources: 1,
priority. 855)
output:analog-surround-50: Analog Surround 5.0 Ausgang (sinks: 1, sources: 0, priority. 700)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0
Ausgang + Analog Stereo Eingang (sinks: 1, sources: 1, priority. 760)
output:analog-surround-50+input:iec958-stereo: Analog Surround 5.0
Ausgang + Digital Stereo (IEC958) Eingang (sinks: 1, sources: 1,
priority. 755)
output:analog-surround-51: Analog Surround 5.1 Ausgang (sinks: 1, sources: 0, priority. 800)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1
Ausgang + Analog Stereo Eingang (sinks: 1, sources: 1, priority. 860)
output:analog-surround-51+input:iec958-stereo: Analog Surround 5.1
Ausgang + Digital Stereo (IEC958) Eingang (sinks: 1, sources: 1,
priority. 855)
output:analog-surround-71: Analog Surround 7.1 Ausgang (sinks: 1, sources: 0, priority. 700)
output:analog-surround-71+input:analog-stereo: Analog Surround 7.1
Ausgang + Analog Stereo Eingang (sinks: 1, sources: 1, priority. 760)
output:analog-surround-71+input:iec958-stereo: Analog Surround 7.1
Ausgang + Digital Stereo (IEC958) Eingang (sinks: 1, sources: 1,
priority. 755)
output:iec958-stereo: Digital Stereo (IEC958) Ausgang (sinks: 1, sources: 0, priority. 5500)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958)
Ausgang + Analog Stereo Eingang (sinks: 1, sources: 1, priority. 5560)
output:iec958-stereo+input:iec958-stereo: Digital Stereo Duplex (IEC958) (sinks: 1, sources: 1, priority. 5555)
off: Aus (sinks: 0, sources: 0, priority. 0)
Aktive Profile: off
Profile:
analog-input-microphone-front: Mikrofon vorne (priority: 8500, latency offset: 0 usec, not available)
Eigenschaften:
device.icon_name = "audio-input-microphone"
Teil des Profils/der Profile: input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:analog-surround-71+input:analog-stereo,
output:iec958-stereo+input:analog-stereo
analog-input-microphone-rear: Mikrofon hinten (priority: 8200, latency offset: 0 usec, not available)
Eigenschaften:
device.icon_name = "audio-input-microphone"
Teil des Profils/der Profile: input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:analog-surround-71+input:analog-stereo,
output:iec958-stereo+input:analog-stereo
analog-input-linein: Line In (priority: 8100, latency offset: 0 usec, not available)
Teil des Profils/der Profile: input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:analog-surround-71+input:analog-stereo,
output:iec958-stereo+input:analog-stereo
iec958-stereo-input: Digitaler Eingang (S/PDIF) (priority: 0, latency offset: 0 usec)
Teil des Profils/der Profile: input:iec958-stereo,
output:analog-stereo+input:iec958-stereo,
output:analog-surround-40+input:iec958-stereo,
output:analog-surround-41+input:iec958-stereo,
output:analog-surround-50+input:iec958-stereo,
output:analog-surround-51+input:iec958-stereo,
output:analog-surround-71+input:iec958-stereo,
output:iec958-stereo+input:iec958-stereo
analog-output: Analoge Ausgabe (priority: 9900, latency offset: 0 usec)
Teil des Profils/der Profile: output:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-stereo+input:iec958-stereo, output:analog-surround-40,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-40+input:iec958-stereo,
output:analog-surround-41,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-41+input:iec958-stereo,
output:analog-surround-50,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-50+input:iec958-stereo,
output:analog-surround-51,
output:analog-surround-51+input:analog-stereo,
output:analog-surround-51+input:iec958-stereo,
output:analog-surround-71,
output:analog-surround-71+input:analog-stereo,
output:analog-surround-71+input:iec958-stereo
analog-output-headphones: Analoge Kopfhörer (priority: 9000, latency offset: 0 usec, not available)
Eigenschaften:
device.icon_name = "audio-headphones"
Teil des Profils/der Profile: output:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-stereo+input:iec958-stereo
iec958-stereo-output: Digitaler Ausgang (S/PDIF) (priority: 0, latency offset: 0 usec)
Teil des Profils/der Profile: output:iec958-stereo,
output:iec958-stereo+input:analog-stereo,
output:iec958-stereo+input:iec958-stereoHi,
man kann hier im Forum auch Dateien als Anhang posten -- das ist einfacher für uns oder andere
So ist es einfach doof damit zu arbeiten.
Es hat was von Lograten 
Grüße
cinfo
Bitte um Unterstützung - nicht immer nur Kritik 
- ich denk mir - wenn jemand um zu helfen einen Download starten muss, ist der Aufwand für den Helfer noch größer.
Falls das mit dem File leichter geht hab ich ihn angehängt !
Würde die nvidia-graphics-drivers.conf aus BM2LTS_V2.88_RC9 helfen? Dort läuft ja die Grafikkarte.
Grüße!
Hi,
Würde die nvidia-graphics-drivers.conf aus BM2LTS_V2.88_RC9 helfen? Dort läuft ja die Grafikkarte.
Grüße!
ja immer -- einfach mal den Inhalt posten und schreiben welche NVIDIA Karte und xorg.conf genutzt wird.
Grüße
cinfo
Hallo,
/etc/modprobe.d/nvidia-graphics-drivers.conf
# This file was installed by nvidia-340-updates
# Do not edit this file manually
blacklist nouveau
blacklist lbm-nouveau
blacklist nvidia-current
blacklist nvidia-173
blacklist nvidia-96
blacklist nvidia-current-updates
blacklist nvidia-173-updates
blacklist nvidia-96-updates
blacklist nvidia-340
alias nvidia nvidia_340_updates
alias nvidia-uvm nvidia_340_updates-uvm
alias nouveau off
alias lbm-nouveau offxorg.conf.nvidia
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSectionEs ist eine Nvidia MSI GT 720 passiv eingebaut. (Diese ist ausreichend, denn es lief auch mit der Nvidia Geforce 210)
Was wird noch gebraucht? (Bitte den Pfad angeben)
Viele Grüße!
Hallo,
mit dem Ton (Kodi & Flash in Firefox) gibt es keinerlei Probleme. Bei Flash scheint es nicht immer flüssig zu laufen (Einbildung?), aber der Ton ist super. MKV (2D) läuft mit Kodi gut. Aber MKV in 3D liefen unter 1.94.3A und Treiber 331.67 selbst mit der Geforce 210 besser.
Grüße!
Hi,
ich habe eine GT720 und nutze die mitgelieferte xorg.conf.nvidia. Am DVI der Nvidia hängt mein TV und am HDMI ein AVR.
1. Kein DD5.1/AC3:
Nach Restore habe ich nach Einstellung der Nvidia mittels pavucontrol auch wieder PCM Sound in FF, Rythmbox,... . Jedoch nur PCM. Auch in Kodi bei "passtrough" über den Nvidia HDMI Ausgang nur PCM (obwohl mittels pavucontrol AC3 angehakt ist)
2 Sobald man in Kodi einen Film startet, stellt sich die Soundwiedergabe auf den Nvidia DVI-Ausgang an dem mein TV hängt (oder den Onboard SPDIF(Realtek). In Kodi ist in den Systemeinstellungen "Default Pulseaudio" gewählt. Aber auch wenn man dort Nvidia HDMI5.1 einstellt hat man keinen Ton. Dazu muss man mit pavucontrol oder "unity-control-center sound" den Nvidia HDMI erneut einstellen.
Steigt man aus Kodi aus erfolgt erneut eine Rückstellung auf DVI (oder Onboard SpDif).
3. Wie gesagt nutzt FF bzw. die Hardwarebeschleuningung nicht. CPU Last geht hoch.
blacklist nouveau
blacklist lbm-nouveau
blacklist nvidia-current
blacklist nvidia-173
blacklist nvidia-96
blacklist nvidia-current-updates
blacklist nvidia-173-updates
blacklist nvidia-96-updates
blacklist nvidia-340-updates
alias nvidia nvidia_340
alias nvidia-uvm nvidia_340-uvm
alias nouveau off
alias lbm-nouveau offreel@BM2LTSR66RBex:/media/hd/home/reel$ grep 'nouveau' /etc/modprobe.d/* | grep nvidia
/etc/modprobe.d/nvidia-340_hybrid.conf:blacklist nouveau
/etc/modprobe.d/nvidia-340_hybrid.conf:blacklist lbm-nouveau
/etc/modprobe.d/nvidia-340_hybrid.conf:alias nouveau off
/etc/modprobe.d/nvidia-340_hybrid.conf:alias lbm-nouveau off
/etc/modprobe.d/nvidia-graphics-drivers.conf:blacklist nouveau
/etc/modprobe.d/nvidia-graphics-drivers.conf:blacklist lbm-nouveau
/etc/modprobe.d/nvidia-graphics-drivers.conf:alias nouveau off
/etc/modprobe.d/nvidia-graphics-drivers.conf:alias lbm-nouveau offUm den Nvidia HDMI als default zu setzen, habe ich einstweilen in etc/pulse/default.pa Folgendes - Probleme 1-3 löst das jedoch nicht :
### Make some devices default
set-default-sink 0
set-card-profile 0 output:hdmi-surround-extra1
das passende syslog mit pulseaudio Debugmeldungen (dabei erfolgte nur ein Neustart der Box ohne Unity login)
Hallo,
an HDMI der NVIDIA hängt mein Panasonic Plasma. Der zeigt leider nicht an, ob AC3 anliegt. Evtl. kann "kdeuser" helfen? Vielleicht kann er testen, ob AC3 bei V2.88 funktioniert.
Grüße!
load-module module-alsa-sink device=hw:1,7 load-module module-alsa-sink device=hw:0,0
Hi , danke für die Hilfe. D.h. du kombinierst onboard und Nvidia. ich würde gerne verstehen was hinter
hw:0,0 und 1,7 steckt
1 ist Onbaord Realtek und 0 ist die nvidia ... aber wiso hw: und ,0 bzw ,7 ?
Sicherheitshalber nochmal folgende Infos mit meinem alten default.pa (set-default-sink 0, set-card-profile 0 output:hdmi-surround-extra1) :
hw:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0 ### DVI
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=7
HDA NVidia, HDMI 1 ### HDMI
...
hw:CARD=PHC,DEV=0
HDA Intel, ALC882 Analog
Direct hardware device without any conversions
hw:CARD=PHC,DEV=1
HDA Intel, ALC882 Digital
Direct hardware device without any conversionsreel@BM2LTSR66RBex:/media/hd/home/reel$ pacmd list-sinks
Welcome to PulseAudio! Use "help" for usage information.
>>> 2 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_01_00.1.hdmi-surround-extra1>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9050
volume: 0: 100% 1: 100% 2: 100% 3: 100% 4: 100% 5: 100%
0: 0,00 dB 1: 0,00 dB 2: 0,00 dB 3: 0,00 dB 4: 0,00 dB 5: 0,00 dB
balance 0,00
base volume: 100%
0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 6ch 44100Hz
channel map: front-left,front-right,rear-left,rear-right,front-center,lfe
Surround 5.1
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 123,36 ms
card: 0 <alsa_card.pci-0000_01_00.1>
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 1"
alsa.id = "HDMI 1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "7"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xdfc7c000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0e0f"
device.string = "hdmi:0,1"
device.buffering.buffer_size = "65280"
device.buffering.fragment_size = "32640"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-surround-extra1"
device.profile.description = "Digital Surround 5.1 (HDMI)"
device.description = "HDA NVidia Digital Surround 5.1 (HDMI)"
alsa.mixer_name = "Nvidia GPU 51 HDMI/DP"
alsa.components = "HDA:10de0051,14628c90,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset -30000 usec, available: no)
properties:
device.icon_name = "video-display"
active port: <hdmi-output-1>
index: 1
name: <alsa_output.pci-0000_00_1b.0.iec958-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9958
volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
base volume: 100%
0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 1
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 371,52 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC882 Digital"
alsa.id = "ALC882 Digital"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "1"
alsa.card = "1"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xddffc000 irq 47"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "27d8"
device.product.name = "NM10/ICH7 Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "iec958:1"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "iec958-stereo"
device.profile.description = "Digital Stereo (IEC958)"
device.description = "Internes Audio Digital Stereo (IEC958)"
alsa.mixer_name = "Realtek ALC882"
alsa.components = "HDA:10ec0882,10ec0882,00100101"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
iec958-stereo-output: Digitaler Ausgang (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
active port: <iec958-stereo-output>beim daemaon meintest du .conf (nicht pa oder ?) - habs mal probiert ... da füllt es das log an (siehe syslog.zip). Ich bin dann ohne load-module sink undohne combine hochgefahren ... siehe syslog_ohne_combine_ohne_load-mod-sink.zip
1 Bei der Gelgehnheit nochmal die Frage nach etc/pulseaudio (ohne all). Ich denke dass das nicht genutzt wird.
Nur wenn ich in /etc/pulse/default.pa set-log-level 4 einbaue bekomme ich Einträge ins syslog
2 Das kommt auch noch immer
Jan 22 16:16:17 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA NVidia/HDA NVidia.conf
Jan 22 16:16:17 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA NVidia
Jan 22 16:16:17 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA NVidia use case configuration -2
Jan 22 16:16:17 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] alsa-ucm.c: UCM not available for card HDA NVidia
Jan 22 16:16:17 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
Jan 22 16:16:17 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
Jan 22 16:16:17 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
Jan 22 16:16:17 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
Jan 22 16:16:17 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: Datei oder Verzeichnis nicht gefunden
Jan 22 16:16:17 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
Jan 22 16:16:17 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
Jan 22 16:16:17 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
Jan 22 16:16:17 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
Jan 22 16:16:18 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
Jan 22 16:16:18 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] alsa-util.c: Error opening PCM device front:0: Datei oder Verzeichnis nicht gefunden
Jan 22 16:16:18 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
Jan 22 16:16:18 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
Jan 22 16:16:18 BM2LTSR66RBex pulseaudio[3650]: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: Datei oder Verzeichnis nicht gefunden
unter /usr/share/alsa/ucm/ gibts keine HDA Nvidia ....
3 Wenn ich die Fies unter /var/lib/lightdm/.config/pulse und ~/.config/pulse lösche (mit meinem default.pa) und dann nur den AVR anschließe bleibt der HDMI Port aktiv. Sind jedoch TV (an DVI) und AVR angeschlossen passiert Folgendes:
a) man spielt einen FIlm in Kodi, der die gleiche Auflösung, wie jene die in Unity gerade eingestellt ist z.B. 1080p24 ist alles OK. Auch wenn man den Film stoppt oder Kodi verlässt.
b) läuft der Film aber z.B. in 1080p50 schaltet ja Kodi (wunschgemäß) auf diese Auflösung und gleichzeitig wird die Pulse Konfiguration
(pavcontrol GUI = PulseAudio Lautstärkenregler, den sollte man statt Klang einstellungen von Unity nutzen)
von HDMI5.1 auf DVI-Stereo (wo der TV hängt) umgeschalten.
Somit steht das bisherige Ausgabegerät HDMI überhaupt nicht mehr z.V. und pulse leitet den Stream auf das einzig verbliebene Gerät = den Onboard Realtek.
Korrigiert man die Konfiguration nun per PulseAudio Lautstärkenregler, läuft der Ton wieder. Stoppt man den Film erneut oder auch beim Ausstieg aus Kodi passsiert exakt das Gleiche.
Was ich schon nicht verstehe ist warum in der pulse Konfiguration nur entweder DVI oder HDMI einstellbar ist und nicht Beide gleichzeitig (wie z.B. beim Onboard sound) 
und es geht immer nur PCM (kein DD5.1/AC3). Im Kodi.log findet sich obwohl in den Einstellungen passthrough enabled ist :
18:34:06 T:2782595904 NOTICE: Creating audio stream (codec id: 86019, channels: 6, sample rate: 48000, no pass-through)
Im syslog erfolgt die Umschaltung von HDMI(HDMI-1) auf DVI(HDMI-0) ... Wer weis bitte warum
Jan 22 18:33:54 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] protocol-native.c: Implicit drain of 'kodi audio stream'
Jan 22 18:33:54 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink.c: Found underrun 4356 bytes ago (6960 bytes ahead in playback buffer)
Jan 22 18:33:54 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink.c: Found underrun 4356 bytes ago (6084 bytes ahead in playback buffer)
Jan 22 18:33:54 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink.c: Found underrun 4356 bytes ago (6048 bytes ahead in playback buffer)
Jan 22 18:33:54 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink.c: Found underrun 10176 bytes ago (1272 bytes ahead in playback buffer)
Jan 22 18:33:54 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] protocol-native.c: Drain acknowledged of 'kodi audio stream'
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Latency set to 20,00ms
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: hwbuf_unused=53760
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: setting avail_min=4961
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: Freeing output 21 "Ausschlagsserkennung"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Latency set to 20,00ms
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: hwbuf_unused=53760
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: setting avail_min=4961
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Requested to rewind 65280 bytes.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Limited to 8880 bytes.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: before: 740
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: after: 740
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Rewound 8880 bytes.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink.c: Processing rewind...
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] source.c: Processing rewind...
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: Freeing input 15 "kodi audio stream"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] client.c: Freed 24 "Kodi"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Connection died.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] client.c: Created 25 "Native client (UNIX socket client)"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Protocol version: remote 28, local 28
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: SHM possible: yes
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for kodi.bin
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:Kodi.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-intended-roles.c: Not setting device for stream kodi audio stream, because already set.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: Trying to change sample rate
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:Kodi.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_01_00.1.hdmi-surround-extra1 becomes busy, resuming.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: Channel matrix:
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: I00 I01
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: +------------
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: O00 | 1,000 0,000
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: O01 | 0,000 1,000
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: O02 | 1,000 0,000
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: O03 | 0,000 1,000
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: O04 | 0,500 0,500
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: O05 | 0,000 0,000
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] remap.c: Using generic matrix remapping
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: Using resampler 'speex-float-1'
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: Using float32le as working format.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: Resampler:
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: rate 44100 -> 48000 (method speex-float-1),
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: format float32le -> s16le (intermediate float32le),
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: channels 2 -> 6 (resampling 2)
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: Choosing speex quality setting 1.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=12, prebuf=0, minreq=1 maxrewind=0
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554436, tlength=33554436, base=12, prebuf=0, minreq=12 maxrewind=0
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: Created input 16 "kodi audio stream" on alsa_output.pci-0000_01_00.1.hdmi-surround-extra1 with sample spec float32le 2ch 44100Hz and channel map front-left,front-right
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: media.name = "kodi audio stream"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: application.name = "Kodi"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: native-protocol.version = "28"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: application.process.id = "5773"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: application.process.user = "reel"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: application.process.host = "BM2LTSR66RBex"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: application.process.binary = "kodi.bin"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: application.language = "C"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: window.x11.display = ":0"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: application.process.machine_id = "9d4a8c8c656eac7a47a2918254672921"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: application.process.session_id = "c2"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:Kodi"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Requested tlength=200,00 ms, minreq=50,00 ms
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Requested latency=50,00 ms, Received latency=50,00 ms
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=52920, base=8, prebuf=35288, minreq=17640 maxrewind=0
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=52920, base=8, prebuf=35288, minreq=17640 maxrewind=0
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Final latency 200,00 ms = 50,00 ms + 2*50,00 ms + 50,00 ms
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Latency set to 20,00ms
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: hwbuf_unused=53760
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: setting avail_min=4961
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-application-name:Kodi.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink-input.c: Requesting rewind due to corking
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Requested to rewind 0 bytes.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Mhmm, actually there is nothing to rewind.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Client kodi.bin changes volume of sink input kodi audio stream.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Client kodi.bin changes volume of sink input kodi audio stream.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink-input.c: Requesting rewind due to uncorking
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Requested to rewind 65280 bytes.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Limited to 10488 bytes.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: before: 874
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: after: 874
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Rewound 10488 bytes.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink.c: Processing rewind...
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] source.c: Processing rewind...
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_01_00.1.hdmi-surround-extra1 becomes busy, resuming.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] protocol-native.c: Requesting rewind due to end of underrun.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Requested to rewind 65280 bytes.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Limited to 9780 bytes.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: before: 815
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: after: 815
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Rewound 9780 bytes.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink.c: Processing rewind...
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink-input.c: Have to rewind 9780 bytes on render memblockq.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] source.c: Processing rewind...
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-intended-roles.c: Not setting device for stream Ausschlagsserkennung, because already set.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: Trying to change sample rate
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_01_00.1.hdmi-surround-extra1 becomes busy, resuming.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: Channel matrix:
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: I00 I01 I02 I03 I04 I05
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: +------------------------------------
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: O00 | 0,167 0,167 0,167 0,167 0,167 0,167
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] remap.c: Using generic matrix remapping
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: Using resampler 'peaks'
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: Using s16le as working format.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: Resampler:
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks),
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le),
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: channels 6 -> 1 (resampling 1)
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=12, prebuf=0, minreq=1 maxrewind=0
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554436, tlength=33554436, base=12, prebuf=0, minreq=12 maxrewind=0
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: Created output 22 "Ausschlagsserkennung" on alsa_output.pci-0000_01_00.1.hdmi-surround-extra1.monitor with sample spec float32le 1ch 25Hz and channel map mono
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: media.name = "Ausschlagsserkennung"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: application.name = "PulseAudio-Lautstärkeregler"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: native-protocol.version = "28"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: application.icon_name = "audio-card"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: application.version = "2.0"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: application.process.id = "5300"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: application.process.user = "reel"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: application.process.host = "BM2LTSR66RBex"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: application.language = "de_DE.UTF-8"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: window.x11.display = ":0.0"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: application.process.machine_id = "9d4a8c8c656eac7a47a2918254672921"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: application.process.session_id = "c2"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Final latency 60,00 ms = 40,00 ms + 20,00 ms
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Latency set to 20,00ms
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: hwbuf_unused=53760
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: setting avail_min=4961
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Latency set to 20,00ms
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: hwbuf_unused=53760
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: setting avail_min=4961
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: ELD info empty (for device=3)
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' is now unplugged
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] device-port.c: Setting port hdmi-output-0 to status no
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-0
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: ELD info empty (for device=7)
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=7 Jack' is now unplugged
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] device-port.c: Setting port hdmi-output-1 to status no
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Jan 22 18:33:55 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-1
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: Monitor name in ELD info is 'SONY TV XV
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: ' (for device=3)
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' is now plugged in
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] device-port.c: Setting port hdmi-output-0 to status yes
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-switch-on-port-available.c: Finding best profile
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Latency set to 20,00ms
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: hwbuf_unused=53760
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: setting avail_min=4961
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: Freeing output 22 "Ausschlagsserkennung"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink-input.c: Have to rewind 11340 bytes on render memblockq.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink-input.c: Have to rewind 6960 bytes on implementor.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Latency set to 20,00ms
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: hwbuf_unused=53760
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: setting avail_min=4961
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink.c: Requesting rewind due to started move
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Requested to rewind 65280 bytes.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Limited to 10152 bytes.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: before: 846
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: after: 846
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Rewound 10152 bytes.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] sink.c: Processing rewind...
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] source.c: Processing rewind...
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] volume.c: Assertion 'pa_cvolume_compatible_with_channel_map(v, from)' failed at pulse/volume.c:515, function pa_cvolume_remap.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-rescue-streams.c: No sink inputs to move away.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-rescue-streams.c: No evacuation source found.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_01_00.1.hdmi-surround-extra1 becomes idle, timeout in 5 seconds.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source-output.c: Freeing output 20 "Ausschlagsserkennung"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 1] alsa-sink.c: Thread shutting down
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: Freeing sink 3 "alsa_output.pci-0000_01_00.1.hdmi-surround-extra1"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: Freeing source 4 "alsa_output.pci-0000_01_00.1.hdmi-surround-extra1.monitor"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio0'
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: Managed to open hdmi:0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: Maximum hw buffer size is 371 ms
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:0.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: Datei oder Verzeichnis nicht gefunden
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-mixer.c: Added 1 ports
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_01_00.1.hdmi-stereo.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: Created sink 4 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.resolution_bits = "16"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.api = "alsa"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.class = "sound"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.class = "generic"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.name = "HDMI 0"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.id = "HDMI 0"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.subdevice = "0"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.device = "3"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.card = "0"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.card_name = "HDA NVidia"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.long_card_name = "HDA NVidia at 0xdfc7c000 irq 17"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.bus = "pci"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.vendor.id = "10de"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.vendor.name = "NVIDIA Corporation"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.product.id = "0e0f"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.string = "hdmi:0"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.buffering.buffer_size = "65536"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.buffering.fragment_size = "32768"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.description = "HDA NVidia Digital Stereo (HDMI)"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.mixer_name = "Nvidia GPU 51 HDMI/DP"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: alsa.components = "HDA:10de0051,14628c90,00100100"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: Created source 5 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: device.description = "Monitor of HDA NVidia Digital Stereo (HDMI)"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: device.class = "monitor"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: alsa.card = "0"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: alsa.card_name = "HDA NVidia"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: alsa.long_card_name = "HDA NVidia at 0xdfc7c000 irq 17"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: device.bus = "pci"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: device.vendor.id = "10de"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: device.vendor.name = "NVIDIA Corporation"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: device.product.id = "0e0f"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: device.string = "0"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: module-udev-detect.discovered = "1"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-sink.c: Using 2,0 fragments of size 32768 bytes (185,76ms), buffer size is 65536 bytes (371,52ms)
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-sink.c: Time scheduling watermark is 60,00ms
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-sink.c: hwbuf_unused=0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-sink.c: setting avail_min=13738
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-mixer.c: Activating path hdmi-output-0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: snd_pcm_dump():
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: Hooks PCM
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: Its setup is:
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: stream : PLAYBACK
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: format : S16_LE
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: subformat : STD
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: channels : 2
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: rate : 44100
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: msbits : 16
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: buffer_size : 16384
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: period_size : 8192
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: period_time : 185759
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: period_step : 1
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: avail_min : 13738
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: period_event : 0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: start_threshold : -1
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: stop_threshold : 1073741824
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: silence_threshold: 0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: silence_size : 0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: boundary : 1073741824
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: Slave: Hardware PCM card 0 'HDA NVidia' device 3 subdevice 0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: Its setup is:
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: stream : PLAYBACK
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: format : S16_LE
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: subformat : STD
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: channels : 2
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: rate : 44100
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: msbits : 16
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: buffer_size : 16384
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: period_size : 8192
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: period_time : 185759
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: period_step : 1
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: avail_min : 13738
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: period_event : 0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: start_threshold : -1
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: stop_threshold : 1073741824
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: silence_threshold: 0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: silence_size : 0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: boundary : 1073741824
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: appl_ptr : 0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: hw_ptr : 0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: Thread starting up
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] core-util.c: Failed to acquire real-time scheduling: Eingabe-/Ausgabefehler
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_01_00.1.hdmi-stereo becomes idle, timeout in 5 seconds.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: Trying to change sample rate
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Requested tlength=200,00 ms, minreq=50,00 ms
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] protocol-native.c: Requested latency=50,00 ms, Received latency=50,00 ms
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: Using resampler 'copy'
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: Using s16le as working format.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: Resampler:
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: rate 44100 -> 44100 (method copy),
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le),
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: Updated resampler for sink input 16
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] sink.c: Requesting rewind due to finished move
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 50,00ms
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=56716
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=14621
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: Requesting rewind due to latency change.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] sink-input.c: Successfully moved sink input 16 to alsa_output.pci-0000_01_00.1.hdmi-stereo.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_01_00.1.hdmi-stereo becomes busy, resuming.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] card.c: Changed profile of card 0 "alsa_card.pci-0000_01_00.1" to output:hdmi-stereo
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: Monitor name in ELD info is 'DSP-Z7
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] alsa-util.c: ' (for device=7)
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=7 Jack' is now plugged in
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] device-port.c: Setting port hdmi-output-1 to status yes
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-1
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-switch-on-port-available.c: Finding best profile
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-switch-on-port-available.c: No suitable profile found
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_01_00.1.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: Requested to rewind 65536 bytes.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: Limited to 64636 bytes.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: before: 16159
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: after: 16159
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] alsa-sink.c: Rewound 64636 bytes.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] sink.c: Processing rewind...
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] sink-input.c: Have to rewind 64636 bytes on render memblockq.
Jan 22 18:33:56 BM2LTSR66RBex pulseaudio[4800]: [alsa-sink-HDMI 0] source.c: Processing rewind...Also das verheiraten von mehreren Outputs bringt mehr Pronleme z.B. Hall...
Besser ist Kodi mit Alsa = ohne Pulseaudio zu starten: http://kodi.wiki/view/PulseAudio
#!/bin/bash
# force KODI to use ALSA for proper passthrough support
export AE_SINK=ALSA
pasuspender -- kodi --standaloneund in den Kodi Audioeinstellungen
- als Ausgabmedium muss hier euer AVR (über Nvidia) eigestellt werden
- 2 Kanalausgabe einstellen
- Passthrough aktivieren
- unter Passthrough nochmals euren AVR einstellen
Bleibt also noch den HTML-5 Player bzw Firefox zu bändigen ... Das GEspann braucht bei Youtube 720p nach wie vor 100% CPU und <20% GPU.
Bitte um Ideen, Tips .... 
Don’t have an account yet? Register yourself now and be a part of our community!