Hallo zusammen,
nach einem Umzug von BW nach NRW verträgt sich mein VDR nicht mehr mit dem Kabelnetz. Es ist mir unmöglich einzelne komplette Transponder (Mux's) zu empfangen, w_scan antwortet mir nur mit crc Fehler.
Mein erster verdacht die Empfangsqualität wäre nicht ausreichend, wiederspricht sich eigentlich damit das die Transponder um die nicht empfangbaren ohne Probleme laufen.
Auch ein Test mit der Software vom Hersteller unter Windows hat auf Anhieb alle Kanäle gefunden und der Empfang ist ohne Störungen.
Weiterer Versuch war, einen betroffenen Kanal aus dem Mux einfach in die Kanalliste zu schreiben, auser kein Bild nur folgendes Ergebnis im log:
Code
Jan 2 20:55:09 vdr vdr: [3198] frontend 0/0 lost lock on channel 31, tp 530
Jan 2 20:55:09 vdr vdr: [3198] frontend 0/0 regained lock on channel 31, tp 530
Jan 2 20:55:09 vdr vdr: [3198] frontend 0/0 lost lock on channel 31, tp 530
Jan 2 20:55:10 vdr vdr: [3198] frontend 0/0 regained lock on channel 31, tp 530Femon zeigt mir auch nur an das es zwischenzeitlich den Lock verliert.
(ber ist nicht zu beachten, auch bei den Channel wo der Empfang störungsfrei ist, bleibt der Wert gleich)
Code
root@vdr:~# femon -H -c 20
FE: DRXK DVB-C DVB-T (DVBC)
Problem retrieving frontend information: Operation not supported
status SCVYL | signal 100% | snr 0% | ber 4196587 | unc 0 | FE_HAS_LOCK
Problem retrieving frontend information: Operation not supported
status SCVYL | signal 100% | snr 0% | ber 4196587 | unc 0 | FE_HAS_LOCK
Problem retrieving frontend information: Operation not supported
status SCVYL | signal 100% | snr 0% | ber 4196587 | unc 0 | FE_HAS_LOCK
Problem retrieving frontend information: Operation not supported
status SCVYL | signal 100% | snr 0% | ber 4196587 | unc 0 | FE_HAS_LOCK
Problem retrieving frontend information: Operation not supported
status SCV | signal 100% | snr 0% | ber 4196587 | unc 97 |
Problem retrieving frontend information: Operation not supported
status SCV | signal 100% | snr 0% | ber 4196587 | unc 125 |
Problem retrieving frontend information: Operation not supported
status SCVYL | signal 100% | snr 0% | ber 4196587 | unc 0 | FE_HAS_LOCK
Problem retrieving frontend information: Operation not supported
status SCV | signal 100% | snr 0% | ber 4196587 | unc 1 |
Problem retrieving frontend information: Operation not supported
status SCVYL | signal 100% | snr 0% | ber 4196587 | unc 0 | FE_HAS_LOCK
Problem retrieving frontend information: Operation not supported
status SCV | signal 100% | snr 0% | ber 4196587 | unc 61 |
Problem retrieving frontend information: Operation not supported
status SCV | signal 100% | snr 0% | ber 4196587 | unc 0 |Leider komme ich nun mit meinen VDR Kenntnisse nicht mehr weiter, diverse Systeme, Kernel und USB Steckplätze habe ich bereits durch, ohne veränderung.
Hat eventuell jemand noch Tipps wo ich hier noch ansetzen könnte? Mein nächster Schritt wäre ein neuer DVB Stick zu besorgen...
Vielen Dank im Voraus.
------------
Anbieter: Unitymedia dvb-c (raum Köln)
Verwenderter Kernel: 3.13.0
System Deb: Debian: 7.0 Wheezy, x64
Verwendeter USB: QuatroStick-nano 520e
dmesg
Display Spoiler
Code
[ 2576.080020] usb 1-1.2: new high-speed USB device number 8 using ehci-pci
[ 2576.174605] usb 1-1.2: New USB device found, idVendor=2013, idProduct=0251
[ 2576.174616] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2576.174621] usb 1-1.2: Product: PCTV 520e
[ 2576.174626] usb 1-1.2: Manufacturer: PCTV Systems
[ 2576.174631] usb 1-1.2: SerialNumber: 00000010GZ1V
[ 2576.175243] em28xx: New device PCTV Systems PCTV 520e @ 480 Mbps (2013:0251, interface 0, class 0)
[ 2576.175251] em28xx: Audio interface 0 found (Vendor Class)
[ 2576.175255] em28xx: Video interface 0 found: isoc
[ 2576.175258] em28xx: DVB interface 0 found: isoc
[ 2576.175472] em28xx: chip ID is em2884
[ 2576.493812] em2884 #0: i2c eeprom 0000: 26 00 03 00 02 0b 0f e5 f5 64 01 60 09 e5 f5 64
[ 2576.493836] em2884 #0: i2c eeprom 0010: 09 60 03 c2 c6 22 e5 f7 b4 03 13 e5 f6 b4 87 03
[ 2576.493854] em2884 #0: i2c eeprom 0020: 02 0a b9 e5 f6 b4 93 03 02 09 46 c2 c6 22 c2 c6
[ 2576.493872] em2884 #0: i2c eeprom 0030: 22 00 60 00 ef 70 08 85 3d 82 85 3c 83 93 ff ef
[ 2576.493890] em2884 #0: i2c eeprom 0040: 60 19 85 3d 82 85 3c 83 e4 93 12 07 a3 12 0a fe
[ 2576.493908] em2884 #0: i2c eeprom 0050: 05 3d e5 3d 70 02 05 3c 1f 80 e4 22 12 0b 06 02
[ 2576.493925] em2884 #0: i2c eeprom 0060: 07 e2 01 00 1a eb 67 95 13 20 51 02 f0 93 6b 13
[ 2576.493943] em2884 #0: i2c eeprom 0070: a0 1a ba 14 ce 1a 39 57 4e 07 09 00 00 00 00 00
[ 2576.493961] em2884 #0: i2c eeprom 0080: 00 00 00 00 4e 36 13 00 f0 10 02 82 82 00 00 00
[ 2576.493978] em2884 #0: i2c eeprom 0090: 5b 53 c0 00 00 00 20 40 20 80 02 20 10 01 00 00
[ 2576.493996] em2884 #0: i2c eeprom 00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2576.494014] em2884 #0: i2c eeprom 00b0: c6 40 00 00 00 00 a7 00 00 00 00 00 00 c2 00 00
[ 2576.494031] em2884 #0: i2c eeprom 00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 38 32
[ 2576.494049] em2884 #0: i2c eeprom 00d0: 34 31 30 31 31 36 36 30 31 37 31 32 32 36 47 5a
[ 2576.494067] em2884 #0: i2c eeprom 00e0: 31 56 00 4f 53 49 30 30 33 30 38 44 30 31 31 30
[ 2576.494084] em2884 #0: i2c eeprom 00f0: 47 5a 31 56 00 00 00 00 00 00 00 00 00 00 31 30
[ 2576.494103] em2884 #0: i2c eeprom 0100: ... (skipped)
[ 2576.494111] em2884 #0: EEPROM ID = 26 00 03 00, EEPROM hash = 0xf3d556f3
[ 2576.494114] em2884 #0: EEPROM info:
[ 2576.494118] em2884 #0: microcode start address = 0x0004, boot configuration = 0x03
[ 2576.503852] em2884 #0: I2S audio, 3 sample rates
[ 2576.503861] em2884 #0: 500mA max power
[ 2576.503867] em2884 #0: Table at offset 0x39, strings=0x1aa0, 0x14ba, 0x1ace
[ 2576.503970] em2884 #0: Identified as PCTV QuatroStick nano (520e) (card=86)
[ 2576.504140] em2884 #0: Config register raw data: 0x50
[ 2576.505192] em2884 #0: AC97 vendor ID = 0x10941094
[ 2576.505558] em2884 #0: AC97 features = 0x1094
[ 2576.505562] em2884 #0: Unknown AC97 audio processor detected!
[ 2576.536699] em2884 #0: v4l2 driver version 0.2.0
[ 2576.642272] em2884 #0: V4L2 video device registered as video0
[ 2576.642281] em2884 #0: analog set to isoc mode.
[ 2576.642285] em2884 #0: dvb set to isoc mode.
[ 2576.642685] em28xx-audio.c: probing for em28xx Audio Vendor Class
[ 2576.642688] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 2576.642691] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab
[ 2576.660935] drxk: status = 0x639260d9
[ 2576.660943] drxk: detected a drx-3926k, spin A3, xtal 20.250 MHz
[ 2578.135418] drxk: DRXK driver version 0.9.4300
[ 2578.153134] drxk: frontend initialized.
[ 2578.153155] tda18271 1-0060: creating new instance
[ 2578.162039] TDA18271HD/C2 detected @ 1-0060
[ 2578.407789] DVB: registering new adapter (em2884 #0)
[ 2578.407807] usb 1-1.2: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
[ 2578.417459] em2884 #0: Successfully loaded em28xx-dvb
[ 2578.420623] Registered IR keymap rc-pinnacle-pctv-hd
[ 2578.420786] input: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/rc/rc6/input21
[ 2578.421166] rc6: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/rc/rc6w_scan
Display Spoiler
Code
root@vdr-ZBOX-ID42-BE:/home/vdr# w_scan -F -t3 -c DE -f c > /opt/scan_3
w_scan version 20130331 (compiled for DVB API 5.10)
/dev/dvb/adapter0/frontend0 -> CABLE "DRXK DVB-C DVB-T": good :-)
Using CABLE frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.a
frontend 'DRXK DVB-C DVB-T' supports
INVERSION_AUTO
QAM_AUTO not supported, trying QAM_64 QAM_256.
FEC_AUTO
FREQ (47.00MHz ... 864.00MHz)
-------snip--------
QAM_256 f = 354000 kHz S6900C0: (time: 00:55) (time: 00:57) signal ok
QAM_256 f = 530000 kHz S6900C0: (time: 01:49) (time: 01:51) signal ok
WARNING: received garbage data: crc = 0x345eb22c; expected crc = 0x88f4e0ea
WARNING: received garbage data: crc = 0x6a2d3929; expected crc = 0x9c29e7a3
WARNING: received garbage data: crc = 0x5657f332; expected crc = 0xbab24b4b
WARNING: received garbage data: crc = 0x93cc2186; expected crc = 0x4746f700
WARNING: received garbage data: crc = 0xbed423f4; expected crc = 0x88f4e0ea
WARNING: received garbage data: crc = 0x3111c983; expected crc = 0x07c5cfa1
Info: no data from NIT(actual)
-------snip--------
QAM_256 f = 570000 kHz S6900C0: (time: 02:44) (time: 02:46) signal ok
QAM_256 f = 410000 kHz S6900C0: (time: 03:38) (time: 03:40) signal ok
QAM_256 f = 418000 kHz S6900C0: (time: 04:32) (time: 04:34) signal ok
QAM_256 f = 426000 kHz S6900C0: (time: 05:26) (time: 05:28) signal ok
QAM_256 f = 394000 kHz S6900C0: (time: 06:20) (time: 06:22) signal ok
QAM_256 f = 370000 kHz S6900C0: (time: 07:14) (time: 07:16) signal ok
QAM_256 f = 362000 kHz S6900C0: (time: 08:08) (time: 08:10) signal ok
QAM_256 f = 378000 kHz S6900C0: (time: 09:02) (time: 09:04) signal ok
WARNING: received garbage data: crc = 0x9933fcac; expected crc = 0x4746f300
WARNING: received garbage data: crc = 0x70329461; expected crc = 0x4e0cfd94
WARNING: received garbage data: crc = 0xa793a632; expected crc = 0xe77bb369
WARNING: received garbage data: crc = 0xc6b4b7d1; expected crc = 0xd7a85aff
WARNING: received garbage data: crc = 0x8fc2c83e; expected crc = 0x4746f300
Info: no data from NIT(actual)
-------snip--------
QAM_256 f = 386000 kHz S6900C0: (time: 09:57) (time: 09:59) signal ok
QAM_256 f = 698000 kHz S6900C0: (time: 10:52) (time: 10:54) signal ok
QAM_256 f = 706000 kHz S6900C0: (time: 11:46) (time: 11:48) signal ok
-------snip--------