Motor not working with VDR 2.1.2

dreamvdrbox · November 13, 2013 at 3:05 PM

Hi

VDR 2.1.2 or 2.0.4 version can not run my rotor..

before I could in this way:

Use DiSEqC: yes

Quote

#1 Eutelsat Hot Bird 13A/13B/13C

S13.0E 11700 V 9750 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 t

S13.0E 99999 V 10600 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 T

S13.0E 11700 H 9750 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 t

S13.0E 99999 H 10600 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 T

#2 Astra 1KR/1L/1M/2C

S19.2E 11700 V 9750 t v W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 t

S19.2E 99999 V 10600 t v W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 T

S19.2E 11700 H 9750 t V W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 t

S19.2E 99999 H 10600 t V W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 T

#3 Eutelsat 16A

S16.0E 11700 V 9750 t v W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B 03] W15 t

S16.0E 99999 V 10600 t v W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B 03] W15 T

S16.0E 11700 H 9750 t V W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B 03] W15 t

S16.0E 99999 H 10600 t V W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B 03] W15 T

#4 Astra 3B

S23.5E 11700 V 9750 t v W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B 04] W15 t

S23.5E 99999 V 10600 t v W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B 04] W15 T

S23.5E 11700 H 9750 t V W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B 04] W15 t

S23.5E 99999 H 10600 t V W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B 04] W15 T

#6 Eutelsat 28A & Astra 1N/2A/2B

S28.2E 11700 V 9750 t v W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06] W15 t

S28.2E 99999 V 10600 t v W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06] W15 T

S28.2E 11700 H 9750 t V W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06] W15 t

S28.2E 99999 H 10600 t V W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06] W15 T

#5 Hellas Sat 2

S39.0E 11700 V 9750 t v W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05] W15 t

S39.0E 99999 V 10600 t v W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05] W15 T

S39.0E 11700 H 9750 t V W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05] W15 t

S39.0E 99999 H 10600 t V W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05] W15 T

#9 Hispasat

S30.0W 11700 V 9750 t v W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B 11] W15 t

S30.0W 99999 V 10600 t v W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B 11] W15 T

S30.0W 11700 H 9750 t V W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B 11] W15 t

S30.0W 99999 H 10600 t V W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B 11] W15 T

#8 Thor

S1.0W 11700 V 9750 t v W15 [E0 31 6B 07] W1 [E0 31 6B 07] W1 [E0 31 6B 07] W15 t

S1.0W 99999 V 10600 t v W15 [E0 31 6B 07] W1 [E0 31 6B 07] W1 [E0 31 6B 07] W15 T

S1.0W 11700 H 9750 t V W15 [E0 31 6B 07] W1 [E0 31 6B 07] W1 [E0 31 6B 07] W15 t

S1.0W 99999 H 10600 t V W15 [E0 31 6B 07] W1 [E0 31 6B 07] W1 [E0 31 6B 07] W15 T

Display More

What has changed compared to before?

I tried this:

Quote

#1 Eutelsat Hot Bird 13A/13B/13C
S13.0E 11700 V 9750 t v W15 P1 W15 t
S13.0E 99999 V 10600 t v W15 P1 W15 T
S13.0E 11700 H 9750 t V W15 P1 W15 t
S13.0E 99999 H 10600 t V W15 P1 W15 T
#2 Astra 1KR/1L/1M/2C
S19.2E 11700 V 9750 t v W15 P2 W15 t
S19.2E 99999 V 10600 t v W15 P2 W15 T
S19.2E 11700 H 9750 t V W15 P2 W15 t
S19.2E 99999 H 10600 t V W15 P2 W15 T

Display More

Quote

#1 Eutelsat Hot Bird 13A/13B/13C
S13.0E 11700 V 9750 t V W15 P1 W15 t v
S13.0E 99999 V 10600 t V W15 P1 W15 T v
S13.0E 11700 H 9750 t V W15 P1 W15 t V
S13.0E 99999 H 10600 t V W15 P1 W15 T V

and finally I tested USALS :

Quote

# Positioner for steerable dish:
#
# S360E 11700 V 9750 t V W20 P W20 t v
# S360E 99999 V 10600 t V W20 P W20 T v
# S360E 11700 H 9750 t V W20 P W20 t V
# S360E 99999 H 10600 t V W20 P W20 T V

I tested all the options and none are run my rotor

I know that the test phase of the VDR 2.1.2version ,but why not work with the old way?

regards

dreamvdrbox · November 13, 2013 at 4:17 PM

Hi Albert

I read what you write, but I've never used RotorNG in previous versions..

I used only:

Quote

#1 Eutelsat Hot Bird 13A/13B/13C

S13.0E 11700 V 9750 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 t

S13.0E 99999 V 10600 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 T

S13.0E 11700 H 9750 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 t

S13.0E 99999 H 10600 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 T

#2 Astra 1KR/1L/1M/2C

S19.2E 11700 V 9750 t v W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 t

S19.2E 99999 V 10600 t v W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 T

S19.2E 11700 H 9750 t V W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 t

S19.2E 99999 H 10600 t V W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 T

#3 Eutelsat 16A

S16.0E 11700 V 9750 t v W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B 03] W15 t

S16.0E 99999 V 10600 t v W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B 03] W15 T

S16.0E 11700 H 9750 t V W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B 03] W15 t

S16.0E 99999 H 10600 t V W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B 03] W15 T

#4 Astra 3B

S23.5E 11700 V 9750 t v W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B 04] W15 t

S23.5E 99999 V 10600 t v W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B 04] W15 T

S23.5E 11700 H 9750 t V W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B 04] W15 t

S23.5E 99999 H 10600 t V W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B 04] W15 T

#6 Eutelsat 28A & Astra 1N/2A/2B

S28.2E 11700 V 9750 t v W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06] W15 t

S28.2E 99999 V 10600 t v W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06] W15 T

S28.2E 11700 H 9750 t V W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06] W15 t

S28.2E 99999 H 10600 t V W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06] W15 T

#5 Hellas Sat 2

S39.0E 11700 V 9750 t v W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05] W15 t

S39.0E 99999 V 10600 t v W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05] W15 T

S39.0E 11700 H 9750 t V W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05] W15 t

S39.0E 99999 H 10600 t V W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05] W15 T

#9 Hispasat

S30.0W 11700 V 9750 t v W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B 11] W15 t

S30.0W 99999 V 10600 t v W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B 11] W15 T

S30.0W 11700 H 9750 t V W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B 11] W15 t

S30.0W 99999 H 10600 t V W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B 11] W15 T

#8 Thor

S1.0W 11700 V 9750 t v W15 [E0 31 6B 07] W1 [E0 31 6B 07] W1 [E0 31 6B 07] W15 t

S1.0W 99999 V 10600 t v W15 [E0 31 6B 07] W1 [E0 31 6B 07] W1 [E0 31 6B 07] W15 T

S1.0W 11700 H 9750 t V W15 [E0 31 6B 07] W1 [E0 31 6B 07] W1 [E0 31 6B 07] W15 t

S1.0W 99999 H 10600 t V W15 [E0 31 6B 07] W1 [E0 31 6B 07] W1 [E0 31 6B 07] W15 T

Display More

I think with 2.0.1 running with no problems ...
I'll try again the old version VDR ..

excuse me what I took this topic...

regards

kls · November 13, 2013 at 4:46 PM

Quote from dreamvdrbox

VDR 2.1.2 or 2.0.4 version can not run my rotor..

Support for steerable dishes has been added only as of version 2.1.1 - so it's no wonder version 2.0.4 can't do it ;-).

Quote

before I could in this way:

Use DiSEqC: yes

Code

#1 Eutelsat Hot Bird 13A/13B/13C


S13.0E 11700 V 9750 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 t


S13.0E 99999 V 10600 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 T


S13.0E 11700 H 9750 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 t


S13.0E 99999 H 10600 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 T


...

Display More

What has changed compared to before?

The only difference I can see here is that you sent each positioner command 3 times, while VDR only sends them once (which works fine with the motor I have here).
To check whether this is what's causing your problem you could modify the function cDiseqcPositioner::GotoPosition() (in diseqc.c) in the folllowing way:

Code

void cDiseqcPositioner::GotoPosition(uint Number, int Longitude)
{
  uint8_t Code[] = { 0x6B, uint8_t(Number) };
  SendDiseqc(Code, 2);
  SendDiseqc(Code, 2); // <--- add this line!
  SendDiseqc(Code, 2); // <--- add this line!
  cPositioner::GotoPosition(Number, Longitude);
}

Klaus

Motor not working with VDR 2.1.2

Participate now!

Users Viewing This Thread