YaVDR 0.4 + Hauppauge remote

    Hi,

    1st, sorry for writing in English.

    I've YaVDR 0.4 (updated) running and configured my remote via the web frontend.I choosed the Hauppauge DVBs option.

    It works fine, except 2 very important keys: OK and Power.

    IRW reports all button correctly.

    With YaVDR 0.3, I was able to use my remote.conf and it worked just fine.

    Now, with 0.4, it doesn't work.

    Any idea how to get it working?

    Thx in advance.

    Hi,
    what TV-card do you use? In yaVDR 0.4 there were many changes regarding remote control. Please deactivate lirc-support via the web-frontend and post the output of these commands:

    Code
    cat /proc/bus/input/devices
sudo ir-keytable
# if there was an output by the previous command do:
sudo ir-keytable -r
    Meine VDRs

    VDR 1: Point of View Ion-330-1, 2x Sundtek MediaTV Pro (DVB-C), Atric IR-Einschalter Rev.5, Ubuntu 18.04 (yavdr-ansible)
    VDR 2: Acer Revo 3610, Pinnacle PCTV SAT 452e, Medion X10, yaVDR 0.6
    VDR 3: Intel DH67BL, Celeron 540, 4 GB Ram, POV Geforce GT 1030, Ubuntu 18.04 (yavdr-ansible), VDR 2.4.1, CIR-Empfänger
    Client 1: Raspberry Pi 2, Arch Linux ARM, VDR 2.3.8
    vdr-epg-daemon auf Cubietruck mit 32 GB SSD, Arch Linux ARM

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

    thx for the quick reply.

    tv card: hauppauge WinTV-NOVA-HD-S2

    devices:


    ir-keytable

    Edited once, last by ultravox (March 14, 2012 at 10:36 PM).

    the name of the remote-keys have to be changed in your ir-keytable.

    your KEY_POWER must be renamed to KEY_POWER2
    But I don't know whats the problem with your KEY_OK.

    Maybe you can do the following:

    Code
    sudo stop eventlircd
sudo ir-keytable -t


    now press the ok-button on your remote (and to get sure press also your power-key).
    and check if the correct events KEY_OK and KEY_POWER2 are shown

    MyVDR: yaVDR-Ansible (Ubuntu 20) - softhddevice-openglosd (ffmpeg 2.8) - epgd/epg2vdr - skindesigner estuary4vdr (adaptiert) - 1920x1080@50 Hz | kodi 21 - xstream
    Aerocube M40 | 300W | ASRock H61M-GE | Intel G530 | Asus ENGT520 | 2 x TT-budget S2-3200 | ASRock Smart Remote (CIR) | 4 GB RAM | 120 GB SSD | 3 TB HDD

    additionally please post the output of a simple "sudo ir-keytable" so I do know whicht keytable has to be changed.

    Meine VDRs

    VDR 1: Point of View Ion-330-1, 2x Sundtek MediaTV Pro (DVB-C), Atric IR-Einschalter Rev.5, Ubuntu 18.04 (yavdr-ansible)
    VDR 2: Acer Revo 3610, Pinnacle PCTV SAT 452e, Medion X10, yaVDR 0.6
    VDR 3: Intel DH67BL, Celeron 540, 4 GB Ram, POV Geforce GT 1030, Ubuntu 18.04 (yavdr-ansible), VDR 2.4.1, CIR-Empfänger
    Client 1: Raspberry Pi 2, Arch Linux ARM, VDR 2.3.8
    vdr-epg-daemon auf Cubietruck mit 32 GB SSD, Arch Linux ARM

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

    as requested:

    Code
    Found /sys/class/rc/rc0/ (/dev/input/event5) with:
        Driver cx88xx, table rc-rc5-hauppauge-new
        Supported protocols: NEC RC-5 RC-6 JVC SONY LIRC 
        Enabled protocols: NEC RC-5 RC-6 JVC SONY LIRC 
        Repeat delay = 500 ms, repeat period = 33 ms
    Code
    1331761155.826550: event MSC: scancode = 1e25
1331761156.068122: event key up: KEY_ENTER (0x001c)
1331761156.068147: event sync
1331761162.594758: event MSC: scancode = 1e3d
1331761162.594783: event key down: KEY_POWER (0x0074)
1331761162.594785: event sync

    cheers

    Edited once, last by ultravox (March 14, 2012 at 10:43 PM).

    Hi, try the script I posted here: Hilfsskript für rc-core Empfänger
    After running it in set mode:

    Code
    sudo ./list-rc-core.sh set


    Edit the newly created /etc/rc_keymaps/rc-rc5-hauppauge-new so it uses RC-5 only

    Code
    # table rc-rc5-hauppauge-new, type: RC-5

    and rename the non-functional keys:

    Code
    0x1e25 = KEY_ENTER


    to

    Code
    0x1e25 = KEY_OK


    and

    Code
    0x1e3d = KEY_POWER


    to

    Code
    0x1e3d = KEY_POWER2


    Then reboot or activate the new keytable by

    Code
    sudo ir-keytable -w  /etc/rc_keymaps/rc-rc5-hauppauge-new
    Meine VDRs

    VDR 1: Point of View Ion-330-1, 2x Sundtek MediaTV Pro (DVB-C), Atric IR-Einschalter Rev.5, Ubuntu 18.04 (yavdr-ansible)
    VDR 2: Acer Revo 3610, Pinnacle PCTV SAT 452e, Medion X10, yaVDR 0.6
    VDR 3: Intel DH67BL, Celeron 540, 4 GB Ram, POV Geforce GT 1030, Ubuntu 18.04 (yavdr-ansible), VDR 2.4.1, CIR-Empfänger
    Client 1: Raspberry Pi 2, Arch Linux ARM, VDR 2.3.8
    vdr-epg-daemon auf Cubietruck mit 32 GB SSD, Arch Linux ARM

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

    Quote from ultravox

    The problem must be due to the fact that KEY_OK and KEY_POWER have to entries on the keytable.


    The problem is caused by our special key namespace. I will try to include the necessary changes to our keymaps - are there any other keys that don't work as exspected?

    Meine VDRs

    VDR 1: Point of View Ion-330-1, 2x Sundtek MediaTV Pro (DVB-C), Atric IR-Einschalter Rev.5, Ubuntu 18.04 (yavdr-ansible)
    VDR 2: Acer Revo 3610, Pinnacle PCTV SAT 452e, Medion X10, yaVDR 0.6
    VDR 3: Intel DH67BL, Celeron 540, 4 GB Ram, POV Geforce GT 1030, Ubuntu 18.04 (yavdr-ansible), VDR 2.4.1, CIR-Empfänger
    Client 1: Raspberry Pi 2, Arch Linux ARM, VDR 2.3.8
    vdr-epg-daemon auf Cubietruck mit 32 GB SSD, Arch Linux ARM

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

    The top keys are not assigned: TV, Video, Music and Pictures.

    For 0.3 I had those keys assgned to some other functions. Not a big issue.

    I'm moving my setup to a Nox media with LCD and Imon. A new chanlange waits me :p

    You could use an entry in /etc/lirc/lircrc like this - KEY_DVD has to be replaced by the keyname that is delivered when pressing the TV Button:

    Code
    begin
    prog = irexec
    button = KEY_DVD
    config = /usr/share/vdr/menuorg-appswitcher standalone=yes app=xbmc
end

    After restarting irexec (or after a reboot) the assigned key should start XBMC.

    Meine VDRs

    VDR 1: Point of View Ion-330-1, 2x Sundtek MediaTV Pro (DVB-C), Atric IR-Einschalter Rev.5, Ubuntu 18.04 (yavdr-ansible)
    VDR 2: Acer Revo 3610, Pinnacle PCTV SAT 452e, Medion X10, yaVDR 0.6
    VDR 3: Intel DH67BL, Celeron 540, 4 GB Ram, POV Geforce GT 1030, Ubuntu 18.04 (yavdr-ansible), VDR 2.4.1, CIR-Empfänger
    Client 1: Raspberry Pi 2, Arch Linux ARM, VDR 2.3.8
    vdr-epg-daemon auf Cubietruck mit 32 GB SSD, Arch Linux ARM

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login