Hallo,
nachdem ich im WEBIF die Audio-Einstellungen ausprobiert habe, gibt es jetzt auf einmal kein Stereo mehr über HDMI.
Habe gar keine Einstellungen bei *.conf manuell vorgenommen.
Digitaler Ton funkt. 1A, wenn ich die Tonspur auswähle.
Das einzige was mich stützig macht, wenn ich bei alsamixer die Nvidia Soundcard auswähle, dann gibt es dort nur SPDIF, ist richtig so?
Hier sind noch ein Paar Daten:
Code
bik@bik:~$ sudo aplay -l
[sudo] password for bik:
**** Liste der Hardware-Geräte (PLAYBACK) ****
Home directory /home/bik not ours.
Karte 0: SB [HDA ATI SB], Gerät 0: ALC888 Analog [ALC888 Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: SB [HDA ATI SB], Gerät 1: ALC888 Digital [ALC888 Digital]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: NVidia [HDA NVidia], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
bik@bik:~$Code
bik@bik:~$ sudo aplay -L
Home directory /home/bik not ours.
null
Discard all samples (playback) or generate zero samples (capture)
default
both
multi
hdmi_formatted
hdmi_complete
front:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
Front speakers
surround40:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=SB,DEV=0
HDA ATI SB, ALC888 Digital
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
Direct sample mixing device
dmix:CARD=SB,DEV=1
HDA ATI SB, ALC888 Digital
Direct sample mixing device
dsnoop:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
Direct sample snooping device
dsnoop:CARD=SB,DEV=1
HDA ATI SB, ALC888 Digital
Direct sample snooping device
hw:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
Direct hardware device without any conversions
hw:CARD=SB,DEV=1
HDA ATI SB, ALC888 Digital
Direct hardware device without any conversions
plughw:CARD=SB,DEV=0
HDA ATI SB, ALC888 Analog
Hardware device with all software conversions
plughw:CARD=SB,DEV=1
HDA ATI SB, ALC888 Digital
Hardware device with all software conversions
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
dmix:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct sample mixing device
dsnoop:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct sample snooping device
hw:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct hardware device without any conversions
plughw:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Hardware device with all software conversions
bik@bik:~$
ausound.conf
Code
pcm.!default {
type plug
slave {
pcm "both"
}
}
pcm.both {
type route
slave {
pcm multi
channels 6
}
ttable.0.0 1.0
ttable.1.1 1.0
ttable.0.2 1.0
ttable.1.3 1.0
ttable.0.4 1.0
ttable.1.5 1.0
}
pcm.multi {
type multi
slaves.a {
pcm "hdmi_hw"
channels 2
}
slaves.b {
pcm "digital_hw"
channels 2
}
slaves.c {
pcm "analog_hw"
channels 2
}
bindings.0.slave a
bindings.0.channel 0
bindings.1.slave a
bindings.1.channel 1
bindings.2.slave b
bindings.2.channel 0
bindings.3.slave b
bindings.3.channel 1
bindings.4.slave c
bindings.4.channel 0
bindings.5.slave c
bindings.5.channel 1
}
pcm.hdmi_hw {
type hw
card 1
device 3
channels 2
}
pcm.hdmi_formatted {
type plug
slave {
pcm hdmi_hw
rate 48000
channels 2
}
}
pcm.hdmi_complete {
type softvol
slave.pcm hdmi_formatted
control.name hdmi_volume
control.card 1
}
pcm.digital_hw {
type hw
card 0
device 1
channels 2
}
pcm.analog_hw {
type hw
card 0
device 0
channels 2
}
Hat vielleicht jemand eine Idee?
Vielen Dank im Voraus!