Beiträge von Mistico

  • SOS Netzwerkkarte

    Hallo Thomas,


    habs gefunden - mach mal ist man zu d....!


    Ich hatte vergessen die /etc/conf.d/net


    anzupassen.


    Hups!


    Grummel :(



    Danke für deine Hilfe.


    Gruß


    Michael

  • Festplatte in DMA

    Hallo Zzam,


    Reiserfs meldet:


    Waring: the dma on your hard drive is turned off.
    This may really slow down the fsck process.


    hier das Ergebnis:


    Linux version 2.6.25-gentoo-r7 (root@XO2S01) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP Mon Aug 4 14:27:39 GMT 2008
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
    BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
    BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS)
    BIOS-e820: 000000007f6e3000 - 000000007f6f0000 (ACPI data)
    BIOS-e820: 000000007f6f0000 - 000000007f700000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    1142MB HIGHMEM available.
    896MB LOWMEM available.
    Scan SMP from c0000000 for 1024 bytes.
    Scan SMP from c009fc00 for 1024 bytes.
    Scan SMP from c00f0000 for 65536 bytes.
    found SMP MP-table at [c00f5300] 000f5300
    Entering add_active_range(0, 0, 521952) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 521952
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 521952
    On node 0 totalpages: 521952
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 2285 pages used for memmap
    HighMem zone: 290291 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    DMI 2.2 present.
    ACPI: RSDP 000F9210, 0014 (r0 IntelR)
    ACPI: RSDT 7F6E3040, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
    ACPI: FACP 7F6E30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
    ACPI: DSDT 7F6E3180, 48E3 (r1 INTELR AWRDACPI 1000 MSFT 100000E)
    ACPI: FACS 7F6E0000, 0040
    ACPI: MCFG 7F6E7B80, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
    ACPI: APIC 7F6E7AC0, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
    ACPI: SSDT 7F6E7C00, 01E0 (r1 PmRef Cpu0Ist 3000 INTL 20040311)
    ACPI: SSDT 7F6E8090, 01E3 (r1 PmRef CpuPm 3000 INTL 20040311)
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 6:15 APIC version 20
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 6:15 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 80000000 (gap: 7f700000:60900000)
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517875
    Kernel command line: root=/dev/ram0 vga=0x318 video=vesafb:mtrr:3,ywrap real_root=/dev/hda3
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 1995.098 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2062224k/2087808k available (2907k kernel code, 24264k reserved, 1139k data, 276k init, 1170304k highmem)
    virtual kernel memory layout:
    fixmap : 0xffc75000 - 0xfffff000 (3624 kB)
    pkmap : 0xff400000 - 0xff800000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc04fb000 - 0xc0540000 ( 276 kB)
    .data : 0xc03d6d2c - 0xc04f3d18 (1139 kB)
    .text : 0xc0100000 - 0xc03d6d2c (2907 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    Calibrating delay using timer specific routine.. 3993.11 BogoMIPS (lpj=19965597)
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    using mwait in idle threads.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    Freeing SMP alternatives: 16k freed
    ACPI: Core revision 20070126
    CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
    Booting processor 1/1 ip 2000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3990.14 BogoMIPS (lpj=19950712)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
    Total of 2 processors activated (7983.26 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    CPU0 attaching sched-domain:
    domain 0: span 00000000,00000003
    groups: 00000000,00000001 00000000,00000002
    CPU1 attaching sched-domain:
    domain 0: span 00000000,00000003
    groups: 00000000,00000002 00000000,00000001
    net_namespace: 244 bytes
    NET: Registered protocol family 16
    No dock devices found.
    EISA bus registered
    ACPI: bus type pci registered
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    libata version 3.00 loaded.
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    system 00:01: ioport range 0x4d0-0x4d1 has been reserved
    system 00:01: ioport range 0x800-0x87f has been reserved
    system 00:01: ioport range 0x880-0x88f has been reserved
    system 00:0b: ioport range 0x400-0x4bf could not be reserved
    system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
    system 00:0e: iomem range 0xcec00-0xcffff has been reserved
    system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
    system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
    system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
    system 00:0e: iomem range 0x7f6e0000-0x7f6fffff could not be reserved
    system 00:0e: iomem range 0x0-0x9ffff could not be reserved
    system 00:0e: iomem range 0x100000-0x7f6dffff could not be reserved
    system 00:0e: iomem range 0x0-0x0 could not be reserved
    system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
    system 00:0e: iomem range 0xfed13000-0xfed1dfff could not be reserved
    system 00:0e: iomem range 0xfed20000-0xfed8ffff could not be reserved
    system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
    system 00:0e: iomem range 0xffb00000-0xffb7ffff could not be reserved
    system 00:0e: iomem range 0xfff00000-0xffffffff could not be reserved
    system 00:0e: iomem range 0xe0000-0xeffff has been reserved
    PCI: Bridge: 0000:00:1c.0
    IO window: b000-bfff
    MEM window: 0xd0000000-0xd00fffff
    PREFETCH window: 0x0000000080000000-0x00000000800fffff
    PCI: Bridge: 0000:00:1e.0
    IO window: c000-cfff
    MEM window: 0xd0100000-0xd01fffff
    PREFETCH window: disabled.
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 2431k freed
    Machine check exception polling timer started.
    highmem bounce pool size: 64 pages
    squashfs: version 3.3 (2007/10/31) Phillip Lougher
    NTFS driver 2.1.29 [Flags: R/O].
    SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
    SGI XFS Quota Management subsystem
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered (default)
    pci 0000:00:02.0: Boot video device
    pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    Allocate Port Service[0000:00:1c.0:pcie03]
    intel_rng: FWH not detected
    vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 6144k, total 7872k
    vesafb: mode is 1024x768x32, linelength=4096, pages=1
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    brd: module loaded
    loop: module loaded
    input: Macintosh mouse button emulation as /class/input/input0
    Uniform Multi-Platform E-IDE driver
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Probing IDE interface ide0...
    hda: WDC WD1600YS-01SHB1, ATA DISK drive
    hdb: Maxtor 6V160E0, ATA DISK drive
    Probing IDE interface ide1...
    hdc: PHILIPS DROM6216, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 512KiB
    hda: 321672960 sectors (164696 MB) w/16384KiB Cache, CHS=20023/255/63
    hda: cache flushes supported
    hda: hda1 hda2 hda3
    hdb: max request size: 512KiB
    hdb: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
    hdb: cache flushes supported
    hdb: hdb1
    hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
    Uniform CD-ROM driver Revision: 3.20
    Loading iSCSI transport class v2.0-869.
    iscsi: registered transport (tcp)
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    SCSI Media Changer driver v0.25
    Driver 'ch' needs updating - please use bus_type methods
    aoe: AoE v47 initialised.
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input1
    EISA: Probing bus 0 at eisa.0
    EISA: Detected 0 cards.
    cpuidle: using governor ladder
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    Using IPI Shortcut mode
    Freeing unused kernel memory: 276k freed
    ata_piix 0000:00:1f.2: version 2.12
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
    ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
    PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:1f.2
    ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16)
    PCI: Unable to reserve I/O region #3:8@170 for device 0000:00:1f.2
    ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 1 (errno=-16)
    ata_piix 0000:00:1f.2: no available native port
    input: ImPS/2 Generic Wheel Mouse as /class/input/input2
    NCR53c406a: no available ports found
    scsi: <fdomain> Detection failed (no card)
    GDT-HA: Storage RAID Controller Driver. Version: 3.05
    GDT-HA: Found 0 PCI Storage RAID Controllers
    qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
    NCR53c406a: no available ports found
    sym53c416.c: Version 1.0.0-ac
    Fusion MPT base driver 3.04.06
    Copyright (c) 1999-2007 LSI Corporation
    Fusion MPT SPI Host driver 3.04.06
    Fusion MPT FC Host driver 3.04.06
    Fusion MPT SAS Host driver 3.04.06
    3ware Storage Controller device driver for Linux v1.26.02.002.
    3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
    Compaq SMART2 Driver (v 2.6.0)
    HP CISS Driver (v 3.6.20)
    Adaptec aacraid driver 1.1-5[2455]-ms
    megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
    megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
    megasas: 00.00.03.16-rc1 Thu. Nov. 07 10:09:32 PDT 2007
    QLogic Fibre Channel HBA Driver
    Emulex LightPulse Fibre Channel SCSI driver 8.2.5
    Copyright(c) 2004-2008 Emulex. All rights reserved.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0340000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000db00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000dd00
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d900
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    usbcore: registered new interface driver hiddev
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    sl811: driver sl811-hcd, 19 May 2005
    ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 19
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[d0104000-d01047ff] Max Packet=[2048] IR/IT contexts=[4/8]
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
    md: raid0 personality registered for level 0
    md: raid1 personality registered for level 1
    async_tx: api initialized (async)
    xor: automatically using best checksumming function: pIII_sse
    pIII_sse : 7208.000 MB/sec
    xor: using function: pIII_sse (7208.000 MB/sec)
    raid6: int32x1 784 MB/s
    raid6: int32x2 763 MB/s
    raid6: int32x4 651 MB/s
    raid6: int32x8 571 MB/s
    raid6: mmxx1 2598 MB/s
    raid6: mmxx2 2722 MB/s
    raid6: sse1x1 1576 MB/s
    raid6: sse1x2 2035 MB/s
    raid6: sse2x1 2984 MB/s
    raid6: sse2x2 3086 MB/s
    raid6: using algorithm sse2x2 (3086 MB/s)
    md: raid6 personality registered for level 6
    md: raid5 personality registered for level 5
    md: raid4 personality registered for level 4
    md: raid10 personality registered for level 10
    JFS: nTxBlock = 8192, nTxLock = 65536
    Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
    Copyright (c) 1999-2006 Intel Corporation.
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000000000004c8]
    ReiserFS: hda3: found reiserfs format "3.6" with standard journal
    ReiserFS: hda3: using ordered data mode
    ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda3: checking transaction log (hda3)
    ReiserFS: hda3: Using r5 hash to sort names
    Real Time Clock Driver v1.12ac
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:01:00.0 to 64
    sky2 0000:01:00.0: v1.21 addr 0xd0020000 irq 16 Yukon-EC (0xb6) rev 2
    sky2 eth0: addr 00:03:2d:0e:f9:bb
    PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:1f.2
    pata_acpi 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16)
    PCI: Unable to reserve I/O region #3:8@170 for device 0000:00:1f.2
    pata_acpi 0000:00:1f.2: failed to request/iomap BARs for port 1 (errno=-16)
    pata_acpi 0000:00:1f.2: no available native port
    FDC 0 is a post-1991 82077
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: SSDT 7F6E8000, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
    ACPI: ACPI0007:01 is registered as cooling_device1
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input4
    ACPI: Power Button (CM) [PWRB]
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [THRM] (53 C)
    ACPI: PNP0C0B:00 is registered as cooling_device2
    ACPI: Fan [FAN] (on)
    CAPI Subsystem Rev 1.1.2.8
    b1: revision 1.1.2.2
    b1dma: revision 1.1.2.3
    ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 16 (level, low) -> IRQ 16
    b1pci: PCI BIOS reports AVM-B1 V4 at i/o 0xc100, irq 16, mem 0xd0105000
    kcapi: Controller [001]: b1pciv4-c100 attached
    b1pci: AVM B1 PCI V4 at i/o 0xc100, irq 16, mem 0xd0105000, revision 4 (dma)
    b1pci: revision 1.1.2.2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
    e100: eth1: e100_probe: addr 0xd0106000, irq 20, MAC addr 00:03:2d:0e:f9:ba
    ReiserFS: hda1: found reiserfs format "3.6" with standard journal
    ReiserFS: hda1: using ordered data mode
    ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda1: checking transaction log (hda1)
    ReiserFS: hda1: Using r5 hash to sort names
    Adding 2008116k swap on /dev/hda2. Priority:-1 extents:1 across:2008116k
    sky2 eth0: enabling interface
    sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    eth0: no IPv6 routers present


    Gruß


    Michael

  • Festplatte in DMA

    Hallo VDR-Fans,


    ich habe da mal eine Frage zu dem DMA-Modus der Festplatte (für SATA - Gentoo "2008").


    Ich habe meine Pationen in reiserfs formatiert und bekomme beim Botten angezeit, das meine Festplatte nicht in DMA Modus angesprochen wird.


    Ich habe das auch mit : hdparm -d 1 /dev/hda
    überprüft.


    Ergebnis ist DMA ist aus. Ok habe ich mir gesagt evetuell wird nicht der richtige Chipsats erkannt und habe das mit lspci überprüft.


    Es wird angezeigt:
    0:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT$
    00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940G$
    00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Expr$
    00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 ($
    00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Control$
    00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Control$
    00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Control$
    00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Control$
    00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Contro$
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
    00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'$
    00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (r$
    00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Co$
    00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
    01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabi$
    02:03.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH B1 I$
    02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Con$
    0


    Wie man sieht ist es ICH7.


    Dann habe ich nach folgender Anleitung einen neuen Kernel gebraten:
    http://gentoo-wiki.com/HARDWARE_SATA


    Trotsdem ohne Erfolg.


    Hat evetuell noch jemand eine Idee?


    Gruß


    Michael

  • Debian und LIRC

    Also:


    nach starten des Rechners:


    modeprobe lirc_serial


    Es wird dann Angezeigt:


    lirc_serial: no version fpr "lirc_unregister-plugin" found:
    lirc_serial: kernel tainted auto-detected active low reciver
    lirc_serial: lirc_register-plugin:sample_rate:0


    Dann Starten des Deamon mit:


    /dev/init.d/lirc start


    Prüfen mit:


    ps -ef | grep -i lircd


    Es wird dann Angezeigt:


    root 3172 1 0 19:34 00:00:00 /usr/local/sbin/lird=device=/dev/lirc



    Wenn ich jetzt z.B. irw starte gibt es keine Fehlermeldung - es werden jedoch keine FB-Befehle angezeigt.



    Gruß


    Mistico

  • Debian und LIRC

    Hallo kovold


    Ich habe Lirc nach deiner Beschreibung installiert.


    modeprobe lirc_serial gibt zurück das ein IR-Empfänger installiert ist.


    Wenn ich jetzt mit irw testen möchte ob die FB geht, entpfängt Lirc keine
    Befehle.


    Ich habe naturloch die richtige lircd.conf für meine FB und den Entpfänger auch getestet.


    Ich stehe so ein bissel auf den Schlauch.



    Gruß


    Mistico

  • ISO Problem LinVDR 6

    Hallo !


    Wenn ich das ISO von Linvdr brennen möchte, dann erzählt mir Nero 6 das die Blockgröße nicht stimmt. Was ist da falsch ? Mit rar kann ich ohne Probleme entpacken.


    Weis einer Rat ?


    Gruß


    Mistico

  • Bildschrim Reinigung ganz Easy !

    Hallo Randy !



    Hast recht - denke das um 23:52 Uhr keine Kids mehr da sind. Werde den Link dann löschen !


    Aber ich denke eine gute Altanative muss her :


    Nun ja wer schon immer mal wissen wollte wie die Welt entstanden ist :


    Klicks DU hier !


    Gruß


    Mistico




    P.S.: Nichts ist für die Ewigkeit !

  • AutoFS

    Hi Burki !


    Also was nicht geht ist, das wenn ich z.B. cd floppy mache die eingelegte disk nicht gemountet wird.


    Gruß


    Mistico

  • AutoFS

    Hallo VDR-Fans !


    Ich stehe mal wieder vor ein Rätzel. Ich versuche dieses AutoFS ans laufen zu bekommen.


    Habe schon geoogel bis meine Schwiegermutter kam un meinte ich soll mich mal wieder mehr um meine Frau kümmern.


    Also was habe ich gemacht :


    Debian Woddy installiert
    kernel-2.4.23 herunter geladen
    Im kernel autofs aktiviert ( nicht als module sondern fest )
    Da frage ich mich welche von den beiden ich nehmen muss habe erst mal autofs4 genommen.
    komaliert
    apt-get install autofs


    Dann wird unter /var/autofs
    zwei Verzeichnisse angelgt
    /misc & /net


    In etc/auto.master wir auf die Verzeichnisse verwiesen.
    In etc/auto.misc werden die Verzeichnisse angegeben die überwacht werden.


    z.B. floppy -fstype=auto,sync,nodev,nosuid :/dev/fd0


    Das scheint ja alles richtig zu sein - ABER - es geht nicht !


    Weis jemand rat ?


    Gruß


    Mistico

  • Shutdown mit Einschalter

    Hallo VDR-Fans !


    Bei LinVDR kann man den VDR per Einschalter runter fahren.


    Wie kann man dieses Funktion in einen Debian-VDR installieren ?
    Wo kann ich mehr über das Thema erfahren ?


    Gruß


    Mistico

  • /dev/nvram Problem

    Hallo Sergei !


    Ich habe das Problem gelöst. Es lag wohl am Kernel. Ich habe das System neu installiert. Noch mal die Kernel-Ouellen runter geladen alles neu kompaliert und nun geht es ohne Porbleme.


    Fazit : Ich habe wohl zu sehr mit menuconfig experementiert. :)


    Danke an alle die geholfen haben. Wäre so maches mal aufgeschmissen ohne eure hilfe!


    Gruß


    Mistico