Posts by topmark

    Hallo nochmal!


    Dann ist der Brenner ja nicht so toll :( Habe ihn mir auch nur geholt weil er überall Testsieger war!


    Hab grade gelesen das es mit der neuen Firmenware ach nicht besser geworden ist :( Dann muss ich wohl mit 35 Min leben!


    Gruß Mark.

    Hallo nochmal!


    Habe grade nochmal getestet das Brennen mit meinen 16x Brenner dauert ca 35Min!


    Ich habe jetzt in der vdrburn.sh -speed=16 eingegeben ist das richtig so?


    35Min ist für einen 16x Brenner doch noch zulang oder?


    Gruß Mark.

    Hallo!


    Habe Linvdr 0.7 mit einer 160GB Festplatte und einen LG DVD Brenner am laufen!


    hdparm -I /dev/hda und
    hdparm -I /dev/hdb


    sagt mir, daß der DVD Brenner mit UDMA2 laüft und die Festplatte mit UDMA5 ist da OK so oder muss der DVD Brenner auch besser UDMA5 haben?


    Wenn ja wie und wo kann ich das einstellen?


    Danke!


    non-removable ATA device, with non-removable media
    Model Number: ST3160023A
    Serial Number: 3JS217GG
    Firmware Revision: 3.06
    Standards:
    Supported: 1 2 3 4 5 6
    Likely used: 6
    Configuration:
    Logical max current
    cylinders 16383 65535
    heads 16 1
    sectors/track 63 63
    bytes/track: 0 (obsolete)
    bytes/sector: 0 (obsolete)
    current sector capacity: 4128705
    LBA user addressable sectors = 268435455
    Capabilities:
    LBA, IORDY(can be disabled)
    Buffer size: 8192.0kB ECC bytes: 4 Queue depth: 1
    Standby timer values: spec'd by standard
    r/w multiple sector transfer: Max = 16 Current = 16
    Advanced power management level: 65278
    DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
    Cycle time: min=120ns recommended=120ns
    PIO: pio0 pio1 pio2 pio3 pio4
    Cycle time: no flow control=240ns IORDY flow control=120ns
    Commands/features:
    Enabled Supported:
    * READ BUFFER cmd
    * WRITE BUFFER cmd
    * Host Protected Area feature set
    * look-ahead
    * write cache
    * Power Management feature set
    Security Mode feature set
    * SMART feature set
    SET MAX security extension
    * DOWNLOAD MICROCODE cmd
    Security:
    supported
    not enabled
    not locked
    not frozen
    not expired: security count
    not supported: enhanced erase
    HW reset results:
    CBLID- above Vih
    Device num = 0 determined by the jumper
    Checksum: correct







    ATAPI CD-ROM, with removable media
    Model Number: HL-DT-ST DVDRAM GSA-H10A
    Serial Number: CEB4AFEDA5F2
    Firmware Revision: JL02
    Standards:
    Configuration:
    DRQ response: 50us.
    Packet size: 12 bytes
    Capabilities:
    LBA, IORDY(can be disabled)
    DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2
    Cycle time: min=120ns recommended=120ns
    PIO: pio0 pio1 pio2 pio3 pio4
    Cycle time: no flow control=120ns IORDY flow control=120ns
    HW reset results:
    CBLID- above Vih
    Device num = 1

    Hallo Uwe!


    Ich habe grade die EgalsTry von Dir in das Text2skin verzeichnis kopiert


    aber es geht auch mit der version nicht :(


    Hier nochmal das logread:Jun 13 16:40:18 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
    Jun 13 16:40:18 linvdr user.info kernel: via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
    Jun 13 16:40:18 linvdr user.info kernel: ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 15 (level, low) -> IRQ 15
    Jun 13 16:40:18 linvdr user.info kernel: 67, IRQ 15.
    Jun 13 16:40:18 linvdr user.info kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
    Jun 13 16:40:18 linvdr user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    Jun 13 16:40:18 linvdr auth.info sshd[1010]: Server listening on 0.0.0.0 port 22.
    Jun 13 16:40:18 linvdr daemon.info init: ^MStarting pid 1021, console /dev/tty1: '/sbin/getty'
    Jun 13 16:40:18 linvdr daemon.info init: ^MStarting pid 1022, console /dev/tty2: '/sbin/getty'
    Jun 13 16:40:18 linvdr daemon.info init: ^MStarting pid 1026, console /dev/tty4: '/sbin/getty'
    Jun 13 16:40:18 linvdr user.info kernel: Linux video capture interface: v1.00
    Jun 13 16:40:19 linvdr daemon.info init: ^MStarting pid 1024, console /dev/tty3: '/sbin/getty'
    Jun 13 16:40:19 linvdr user.warn kernel: saa7146: register extension 'dvb'.
    Jun 13 16:40:19 linvdr user.info kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
    Jun 13 16:40:19 linvdr user.warn kernel: found saa7146 @ mem c6864000 (revision 1, irq 11) (0x13c2,0x1002).
    Jun 13 16:40:19 linvdr user.warn kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev1.3).
    Jun 13 16:40:19 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:2d:cc:71
    Jun 13 16:40:20 linvdr user.warn kernel: dvb-ttpci: gpioirq unknown type=0 len=0
    Jun 13 16:40:20 linvdr user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d
    Jun 13 16:40:20 linvdr user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
    Jun 13 16:40:20 linvdr user.warn kernel: dvb-ttpci: adac type set to 0 @ card 0
    Jun 13 16:40:20 linvdr user.warn kernel: saa7146 (0): registered device video0 [v4l2]
    Jun 13 16:40:20 linvdr user.warn kernel: ves1x93: Detected ves1893a rev2
    Jun 13 16:40:20 linvdr user.warn kernel: DVB: registering frontend 0 (VLSI VES1x93 DVB-S)...
    Jun 13 16:40:20 linvdr user.info kernel: dvb-ttpci: found av7110-0.
    Jun 13 16:40:20 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
    Jun 13 16:40:20 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
    Jun 13 16:40:20 linvdr user.warn kernel: saa7146: register extension 'budget dvb /w video in'.
    Jun 13 16:40:20 linvdr user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
    Jun 13 16:40:20 linvdr user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
    Jun 13 16:40:21 linvdr user.info kernel: lirc_serial: auto-detected active low receiver
    Jun 13 16:40:21 linvdr user.warn kernel: lirc_dev: lirc_register_plugin:sample_rate: 0
    Jun 13 16:40:22 linvdr user.info vdr[1118]: VDR version 1.3.23 started
    Jun 13 16:40:22 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-burn.so.1.3.23
    Jun 13 16:40:22 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-director.so.1.3.23
    Jun 13 16:40:22 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.3.23
    Jun 13 16:40:22 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-graphlcd.so.1.3.23
    Jun 13 16:40:22 linvdr user.info vdr[1118]: graphlcd: No config file specified, using default (/etc/graphlcd.conf).
    Jun 13 16:40:22 linvdr user.info vdr[1118]: graphlcd: WARNING: No display specified, using first one (ks0108).
    Jun 13 16:40:22 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-text2skin.so.1.3.23
    Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/setup.conf
    Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/sources.conf
    Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/diseqc.conf
    Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/channels.conf
    Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/timers.conf
    Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/commands.conf
    Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/reccmds.conf
    Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/svdrphosts.conf
    Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/ca.conf
    Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/remote.conf
    Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/keymacros.conf
    Jun 13 16:40:23 linvdr user.debug vdr[1118]: reading EPG data from /ramdisk/epg.data
    Jun 13 16:40:23 linvdr user.debug vdr[1118]: probing /dev/dvb/adapter0/frontend0
    Jun 13 16:40:23 linvdr user.debug vdr[1118]: probing /dev/dvb/adapter1/frontend0
    Jun 13 16:40:23 linvdr user.info vdr[1118]: found 1 video device
    Jun 13 16:40:23 linvdr user.info vdr[1118]: initializing plugin: burn (0.0.6f): Versatile convert-and-burn plugin
    Jun 13 16:40:23 linvdr user.info vdr[1118]: initializing plugin: director (0.2.0): plugin to use the premiere multifeed option
    Jun 13 16:40:23 linvdr user.info vdr[1118]: initializing plugin: femon (0.8.7): DVB Signal Information Monitor (OSD)
    Jun 13 16:40:23 linvdr user.info vdr[1118]: initializing plugin: graphlcd (0.1.2-pre5): Output to graphic LCD
    Jun 13 16:40:23 linvdr user.debug vdr[1123]: tuner on device 1 thread started (pid=1123, tid=1026)
    Jun 13 16:40:23 linvdr user.debug vdr[1124]: Section handler thread started (pid=1124, tid=2051)
    Jun 13 16:40:23 linvdr user.info vdr[1118]: initializing plugin: text2skin (1.0): Loader for text-based skins
    Jun 13 16:40:23 linvdr user.info vdr[1118]: setting primary device to 1
    Jun 13 16:40:23 linvdr user.debug vdr[1125]: ks0108: benchmark started.
    Jun 13 16:40:23 linvdr user.info vdr[1118]: SVDRP listening on port 2001
    Jun 13 16:40:23 linvdr user.debug vdr[1125]: ks0108: benchmark stopped. Time for Command: 1613ns
    Jun 13 16:40:23 linvdr user.info vdr[1125]: ks0108: KS0108 initialized.
    Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/themes/classic-default.theme
    Jun 13 16:40:23 linvdr user.info vdr[1118]: starting plugin: burn
    Jun 13 16:40:23 linvdr user.info vdr[1118]: starting plugin: director
    Jun 13 16:40:23 linvdr user.info vdr[1118]: starting plugin: femon
    Jun 13 16:40:23 linvdr user.info vdr[1118]: starting plugin: graphlcd
    Jun 13 16:40:23 linvdr user.debug vdr[1118]: graphlcd: waiting for display thread to get ready
    Jun 13 16:40:23 linvdr user.debug vdr[1118]: graphlcd: display thread ready
    Jun 13 16:40:23 linvdr user.info vdr[1118]: starting plugin: text2skin
    Jun 13 16:40:23 linvdr user.debug vdr[1125]: graphlcd plugin: Display update thread started (pid=1125)
    Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.trans
    Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.colors
    Jun 13 16:40:23 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.skin
    Jun 13 16:40:23 linvdr user.err vdr[1118]: ERROR: Unexpected token {RecordingName}
    Jun 13 16:40:23 linvdr user.err vdr[1118]: ERROR: Text2Skin: Unexpected value not(or({PresentTitle},{RecordingName})) for attribute condition
    Jun 13 16:40:23 linvdr user.err vdr[1118]: ERROR: Text2Skin: Parse error in /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.skin, line 12
    Jun 13 16:40:23 linvdr user.err vdr[1118]: ERROR: error in skin file
    Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/demo/demo.trans
    Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/demo/demo.colors
    Jun 13 16:40:23 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/demo/demo.skin
    Jun 13 16:40:23 linvdr user.err vdr[1118]: ERROR: text2skin: Skin is version , expecting 1.0
    Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.trans
    Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.colors
    Jun 13 16:40:23 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.skin
    Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Enigma/Enigma.trans
    Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Enigma/Enigma.colors
    Jun 13 16:40:23 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/Enigma/Enigma.skin
    Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.trans
    Jun 13 16:40:23 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.colors
    Jun 13 16:40:23 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.skin
    Jun 13 16:40:23 linvdr user.info vdr[1118]: loading /etc/vdr/themes/DeepBlue-default.theme
    Jun 13 16:40:23 linvdr user.debug vdr[1126]: LIRC remote control thread started (pid=1126, tid=4101)
    Jun 13 16:40:23 linvdr user.debug vdr[1127]: KBD remote control thread started (pid=1127, tid=5126)
    Jun 13 16:40:23 linvdr user.debug vdr[1118]: remote control LIRC - keys known
    Jun 13 16:40:23 linvdr user.debug vdr[1118]: remote control KBD - keys known
    Jun 13 16:40:23 linvdr user.info vdr[1118]: switching to channel 1
    Jun 13 16:40:23 linvdr user.debug vdr[1118]: glcdgraphics: image /etc/vdr/plugins/graphlcd/logos/DAS ERSTE_m.glcd loaded.
    Jun 13 16:40:24 linvdr user.debug vdr[1118]: setting watchdog timer to 900 seconds
    Jun 13 16:40:24 linvdr user.debug vdr[1128]: Text2Skin: channelInfo display update thread started (pid=1128, tid=6151)
    Jun 13 16:40:28 linvdr user.info vdr[1118]: connect from 127.0.0.1, port 1024 - accepted
    Jun 13 16:40:29 linvdr user.info vdr[1118]: closing SVDRP connection
    Jun 13 16:40:29 linvdr user.debug vdr[1128]: Text2Skin: channelInfo display update thread ended (pid=1128, tid=6151)
    Jun 13 16:40:30 linvdr user.debug vdr[1118]: max. latency time 1 seconds
    Jun 13 16:40:50 linvdr cron.notice crond[1142]: crond 2.3.2 dillon, started, log level 8
    Jun 13 16:41:08 linvdr user.debug vdr[1143]: Text2Skin: channelInfo display update thread started (pid=1143, tid=7175)
    Jun 13 16:41:13 linvdr user.debug vdr[1143]: Text2Skin: channelInfo display update thread ended (pid=1143, tid=7175)
    Jun 13 16:41:13 linvdr user.debug vdr[1144]: Text2Skin: menu display update thread started (pid=1144, tid=8199)
    Jun 13 16:41:34 linvdr user.info vdr[1118]: loading /etc/vdr/themes/DeepBlue-default.theme
    Jun 13 16:41:34 linvdr user.info vdr[1118]: saved setup to /etc/vdr/setup.conf
    Jun 13 16:41:37 linvdr user.debug vdr[1144]: Text2Skin: menu display update thread ended (pid=1144, tid=8199)
    Jun 13 16:45:01 linvdr cron.notice crond[1142]: USER root pid 1145 cmd convert.pl -q -s
    Jun 13 16:46:40 linvdr auth.info sshd[1146]: Could not reverse map address 192.168.0.2.
    Jun 13 16:46:42 linvdr auth.info sshd[1146]: Accepted password for root from 192.168.0.2 port 1796
    Jun 13 16:46:42 linvdr auth.info sshd[1146]: lastlog_get_entry: Error reading from /var/log/lastlog: No such file or directory
    Jun 13 16:46:42 linvdr auth.info PAM_unix[1146]: (ssh) session opened for user root by (uid=0)
    Jun 13 16:46:42 linvdr auth.err PAM-env[1146]: Unable to open config file: No such file or directory
    Jun 13 16:46:42 linvdr auth.err PAM-env[1147]: Unable to open config file: No such file or directory
    linvdr:~#


    Sonst noch eine Idee warum es nicht geht?


    Gruß Mark.

    Hallo Zusammen!


    Ich habe ein Epia Me 600 + Linvdr 07+ Mt Patch!


    Hab grade versucht eine DVD zu erstellen mit den Burn-Plugin.


    Ich habe ein Lg GSA 4167B Brenner der DVD- und DVD+ mit 16x scheiben kann. So das umwandeln dauerte ca.45 min und das Brennen nochmal 55 min müste doch schneller gehen mit einen 16x Brenner oder ist das bei den Plugin normal?


    Wenn nicht wo kann ich die geschwindigkeit einstellen?


    Danke und Gruß Mark.

    Hallo!


    In /var/log/messages steht nur:


    HINT: LinVDR is using the busybox syslogd.
    Type "logread" or "logread -f" to see syslog messages.


    Und im logread:


    Jun 12 10:38:50 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
    Jun 12 10:38:50 linvdr user.info kernel: via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
    Jun 12 10:38:50 linvdr user.info kernel: ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 15 (level, low) -> IRQ 15
    Jun 12 10:38:50 linvdr user.info kernel: 67, IRQ 15.
    Jun 12 10:38:50 linvdr user.info kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
    Jun 12 10:38:50 linvdr user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    Jun 12 10:38:50 linvdr user.info kernel: Linux video capture interface: v1.00
    Jun 12 10:38:50 linvdr auth.info sshd[1017]: Server listening on 0.0.0.0 port 22.
    Jun 12 10:38:50 linvdr daemon.info init: ^MStarting pid 1025, console /dev/tty1: '/sbin/getty'
    Jun 12 10:38:50 linvdr daemon.info init: ^MStarting pid 1026, console /dev/tty2: '/sbin/getty'
    Jun 12 10:38:50 linvdr daemon.info init: ^MStarting pid 1028, console /dev/tty3: '/sbin/getty'
    Jun 12 10:38:50 linvdr daemon.info init: ^MStarting pid 1030, console /dev/tty4: '/sbin/getty'
    Jun 12 10:38:51 linvdr user.warn kernel: saa7146: register extension 'dvb'.
    Jun 12 10:38:51 linvdr user.info kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
    Jun 12 10:38:51 linvdr user.warn kernel: found saa7146 @ mem c6864000 (revision 1, irq 11) (0x13c2,0x1002).
    Jun 12 10:38:51 linvdr user.warn kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev1.3).
    Jun 12 10:38:51 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:2d:cc:71
    Jun 12 10:38:52 linvdr user.warn kernel: dvb-ttpci: gpioirq unknown type=0 len=0
    Jun 12 10:38:52 linvdr user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d
    Jun 12 10:38:52 linvdr user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
    Jun 12 10:38:52 linvdr user.warn kernel: dvb-ttpci: adac type set to 0 @ card 0
    Jun 12 10:38:52 linvdr user.warn kernel: saa7146 (0): registered device video0 [v4l2]
    Jun 12 10:38:52 linvdr user.warn kernel: ves1x93: Detected ves1893a rev2
    Jun 12 10:38:52 linvdr user.warn kernel: DVB: registering frontend 0 (VLSI VES1x93 DVB-S)...
    Jun 12 10:38:52 linvdr user.info kernel: dvb-ttpci: found av7110-0.
    Jun 12 10:38:52 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
    Jun 12 10:38:52 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
    Jun 12 10:38:52 linvdr user.warn kernel: saa7146: register extension 'budget dvb /w video in'.
    Jun 12 10:38:52 linvdr user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
    Jun 12 10:38:52 linvdr user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
    Jun 12 10:38:53 linvdr user.info kernel: lirc_serial: auto-detected active low receiver
    Jun 12 10:38:53 linvdr user.warn kernel: lirc_dev: lirc_register_plugin:sample_rate: 0
    Jun 12 10:38:54 linvdr user.info vdr[1118]: VDR version 1.3.23 started
    Jun 12 10:38:54 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-burn.so.1.3.23
    Jun 12 10:38:54 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-director.so.1.3.23
    Jun 12 10:38:54 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.3.23
    Jun 12 10:38:54 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-graphlcd.so.1.3.23
    Jun 12 10:38:54 linvdr user.info vdr[1118]: graphlcd: No config file specified, using default (/etc/graphlcd.conf).
    Jun 12 10:38:54 linvdr user.info vdr[1118]: graphlcd: WARNING: No display specified, using first one (ks0108).
    Jun 12 10:38:54 linvdr user.info vdr[1118]: loading plugin: /usr/lib/vdr/plugins/libvdr-text2skin.so.1.3.23
    Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/setup.conf
    Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/sources.conf
    Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/diseqc.conf
    Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/channels.conf
    Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/commands.conf
    Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/reccmds.conf
    Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/svdrphosts.conf
    Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/ca.conf
    Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/remote.conf
    Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/keymacros.conf
    Jun 12 10:38:55 linvdr user.debug vdr[1118]: probing /dev/dvb/adapter0/frontend0
    Jun 12 10:38:55 linvdr user.debug vdr[1123]: tuner on device 1 thread started (pid=1123, tid=1026)
    Jun 12 10:38:55 linvdr user.debug vdr[1118]: probing /dev/dvb/adapter1/frontend0
    Jun 12 10:38:55 linvdr user.info vdr[1118]: found 1 video device
    Jun 12 10:38:55 linvdr user.info vdr[1118]: initializing plugin: burn (0.0.6f): Versatile convert-and-burn plugin
    Jun 12 10:38:55 linvdr user.info vdr[1118]: initializing plugin: director (0.2.0): plugin to use the premiere multifeed option
    Jun 12 10:38:55 linvdr user.info vdr[1118]: initializing plugin: femon (0.8.7): DVB Signal Information Monitor (OSD)
    Jun 12 10:38:55 linvdr user.info vdr[1118]: initializing plugin: graphlcd (0.1.2-pre5): Output to graphic LCD
    Jun 12 10:38:55 linvdr user.debug vdr[1124]: Section handler thread started (pid=1124, tid=2051)
    Jun 12 10:38:55 linvdr user.info vdr[1118]: initializing plugin: text2skin (1.0): Loader for text-based skins
    Jun 12 10:38:55 linvdr user.info vdr[1118]: setting primary device to 1
    Jun 12 10:38:55 linvdr user.debug vdr[1125]: ks0108: benchmark started.
    Jun 12 10:38:55 linvdr user.info vdr[1118]: SVDRP listening on port 2001
    Jun 12 10:38:55 linvdr user.debug vdr[1125]: ks0108: benchmark stopped. Time for Command: 1614ns
    Jun 12 10:38:55 linvdr user.info vdr[1125]: ks0108: KS0108 initialized.
    Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/themes/classic-default.theme
    Jun 12 10:38:55 linvdr user.info vdr[1118]: starting plugin: burn
    Jun 12 10:38:55 linvdr user.info vdr[1118]: starting plugin: director
    Jun 12 10:38:55 linvdr user.info vdr[1118]: starting plugin: femon
    Jun 12 10:38:55 linvdr user.info vdr[1118]: starting plugin: graphlcd
    Jun 12 10:38:55 linvdr user.debug vdr[1118]: graphlcd: waiting for display thread to get ready
    Jun 12 10:38:55 linvdr user.debug vdr[1118]: graphlcd: display thread ready
    Jun 12 10:38:55 linvdr user.info vdr[1118]: starting plugin: text2skin
    Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.trans
    Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.colors
    Jun 12 10:38:55 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.skin
    Jun 12 10:38:55 linvdr user.err vdr[1118]: ERROR: text2skin: Skin is version , expecting 1.0
    Jun 12 10:38:55 linvdr user.debug vdr[1125]: graphlcd plugin: Display update thread started (pid=1125)
    Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/demo/demo.trans
    Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/demo/demo.colors
    Jun 12 10:38:55 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/demo/demo.skin
    Jun 12 10:38:55 linvdr user.err vdr[1118]: ERROR: text2skin: Skin is version , expecting 1.0
    Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.trans
    Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.colors
    Jun 12 10:38:55 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.skin
    Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Enigma/Enigma.trans
    Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/Enigma/Enigma.colors
    Jun 12 10:38:55 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/Enigma/Enigma.skin
    Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.trans
    Jun 12 10:38:55 linvdr user.info vdr[1118]: text2skin: loading /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.colors
    Jun 12 10:38:55 linvdr user.info vdr[1118]: parsing /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.skin
    Jun 12 10:38:55 linvdr user.info vdr[1118]: loading /etc/vdr/themes/DeepBlue-default.theme
    Jun 12 10:38:55 linvdr user.debug vdr[1126]: LIRC remote control thread started (pid=1126, tid=4101)
    Jun 12 10:38:55 linvdr user.debug vdr[1127]: KBD remote control thread started (pid=1127, tid=5126)
    Jun 12 10:38:55 linvdr user.debug vdr[1118]: remote control LIRC - keys known
    Jun 12 10:38:55 linvdr user.debug vdr[1118]: remote control KBD - keys known
    Jun 12 10:38:55 linvdr user.info vdr[1118]: switching to channel 3
    Jun 12 10:38:55 linvdr user.debug vdr[1118]: glcdgraphics: image /etc/vdr/plugins/graphlcd/logos/RTL TELEVISION_m.glcd loaded.
    Jun 12 10:38:56 linvdr user.debug vdr[1118]: setting watchdog timer to 900 seconds
    Jun 12 10:38:56 linvdr user.debug vdr[1128]: Text2Skin: channelInfo display update thread started (pid=1128, tid=6151)
    Jun 12 10:39:00 linvdr user.info vdr[1118]: connect from 127.0.0.1, port 1024 - accepted
    Jun 12 10:39:01 linvdr user.info vdr[1118]: closing SVDRP connection
    Jun 12 10:39:01 linvdr user.debug vdr[1128]: Text2Skin: channelInfo display update thread ended (pid=1128, tid=6151)
    Jun 12 10:39:02 linvdr user.debug vdr[1118]: assuming manual start of VDR
    Jun 12 10:39:02 linvdr user.debug vdr[1118]: max. latency time 1 seconds
    Jun 12 10:39:03 linvdr user.debug vdr[1131]: Text2Skin: channelInfo display update thread started (pid=1131, tid=7175)
    Jun 12 10:39:06 linvdr user.info vdr[1118]: switching to channel 2
    Jun 12 10:39:06 linvdr user.debug vdr[1118]: glcdgraphics: image /etc/vdr/plugins/graphlcd/logos/ZDF_m.glcd loaded.
    Jun 12 10:39:06 linvdr user.info vdr[1118]: switching to channel 1
    Jun 12 10:39:06 linvdr user.debug vdr[1118]: glcdgraphics: image /etc/vdr/plugins/graphlcd/logos/DAS ERSTE_m.glcd loaded.
    Jun 12 10:39:08 linvdr user.info vdr[1118]: switching to channel 2
    Jun 12 10:39:09 linvdr user.info vdr[1118]: switching to channel 3
    Jun 12 10:39:09 linvdr user.info vdr[1118]: switching to channel 2
    Jun 12 10:39:10 linvdr user.info vdr[1118]: switching to channel 1
    Jun 12 10:39:22 linvdr cron.notice crond[1143]: crond 2.3.2 dillon, started, log level 8
    Jun 12 10:39:44 linvdr auth.info sshd[1144]: Connection closed by 192.168.0.2
    Jun 12 10:39:50 linvdr auth.info sshd[1145]: Could not reverse map address 192.168.0.2.
    Jun 12 10:39:50 linvdr auth.info sshd[1145]: Accepted password for root from 192.168.0.2 port 1311 ssh2
    Jun 12 10:39:50 linvdr auth.info PAM_unix[1145]: (ssh) session opened for user root by (uid=0)
    Jun 12 10:39:50 linvdr auth.err PAM-env[1145]: Unable to open config file: No such file or directory
    Jun 12 10:39:50 linvdr auth.err PAM-env[1146]: Unable to open config file: No such file or directory
    Jun 12 10:40:01 linvdr cron.notice crond[1143]: USER root pid 1153 cmd convert.pl -q -s
    Jun 12 10:41:29 linvdr auth.info PAM_unix[1145]: (ssh) session closed for user root
    Jun 12 10:41:29 linvdr auth.err sshd[1145]: PAM pam_putenv: delete non-existent entry; MAIL
    Jun 12 10:41:29 linvdr auth.err PAM-env[1145]: Unable to open config file: No such file or directory
    Jun 12 10:43:28 linvdr auth.info sshd[1160]: Could not reverse map address 192.168.0.2.
    Jun 12 10:43:30 linvdr auth.info sshd[1160]: Accepted password for root from 192.168.0.2 port 1361
    Jun 12 10:43:30 linvdr auth.info PAM_unix[1160]: (ssh) session opened for user root by (uid=0)
    Jun 12 10:43:30 linvdr auth.err PAM-env[1160]: Unable to open config file: No such file or directory
    Jun 12 10:43:30 linvdr auth.err PAM-env[1161]: Unable to open config file: No such file or directory
    linvdr:~#

    Hallo Zusammen!


    Habe Linvdr 0.7 und den mt-1.3.23-20050428 patch am laufen!


    Ich bekomm unter Einstellungen/ OSD/ Oberfläche micht den Skin EgalsTry angezeigt obwol der Skin im Ordner etc/vdr/plugins/text2skin
    ist :(


    Muss man da noch woanders was einstellen?


    Bitte um Hilfe!


    Gruß Mark.

    Hallo!


    Habe ein Epia Me 6000 und Linvdr 07 und das Avboard 1.3.


    Meine Fernbedienung ist die MD 41169.


    Ich bekomme den Code zum Einschalten des Mainbords angelernt und wenn ich denn Rechner starte denn kommt auch der Lernmodus aber er reagiert nicht auf die Fernbedienung! Habe im Setup Original Fernbedienung eingeschalltet und die remote.conf gelöscht!


    Ach ja ich habe auch ein Wol Kabel vom Mainboard zum Avboard gezogen und die Kurzschlussbrücke BR3 getrennt wegen den 5v_SB


    Bitte um Hilfe!


    Danke.

    Hallo Zusammen!


    Ich hab Linvdr 0.7 am laufen und ein LCD mit drann.
    In der runvdr hab ich folgenden Eintrag gemacht damit das LCD geht


    $BINDIR/vdr -L $PLUGINDIR $PLUGINS $COMMON_PARAMETER -v /video0 -c $CONFDIR -w 900 -E /ramdisk/epg.data -P'graphlcd -c ks0108 -p 0x378 -x 128 -y 64' -s /usr/bin/poweroff.pl < /dev/tty$VDRTTY


    Dann hab ich den MarkTwain Patch linvdr-0.7-mt-1.3.24-20050518.tgz
    eingespielt und seitdem bleibt mein LCD dunkel :(


    Was und wo muss ich was ändern damit es wieder geht?


    Danke und Gruß.